OpenSUSE Hardware :: Blinking LXDE And Gnome - Fresh Install - Graphics Resolution Is Wrong?
Apr 7, 2011
I've borrowed a copy of 11.4 DVD install disc from someone at work, everything went fine install wise. Except Grub taking control, which I didn't ask it to, but easy fix with yast, problem is firstly my graphics resolution is wrong, but I'm trying to work that one out myself as it always seems to be happening with distros I use on my machine. The weird thing is my desktop blinks! Every 10secs or so the whole screen goes blank and then reappears? I thought it might be the wrong refresh rate, but that's at 60Hz which is correct, would it be the resolution problem?
My hardware:-
P4 2.8
1Gb ram
Geforce FX 5500
Dell 1703FP monitor
I was trying to running diagnostic's from Opensuse, but the blinking was getting on my nerves and I'm not familiar with a non Debian based OS......yet! I've got compiz and all running on the hardware in my Ubuntu install after editing the xorg.conf, could I simply copy that to my Opensuse install?
I have installed Debian Lenny with LXDE on a Dual USB 500Mhz iBook g3 the login screen appears displaying the screen using "800x600" pixels with the screen resolution at "1024x768" - so the login screen fills 2/3 of the LCD with black space to the right and the image repeating itself in the bottom 1/3 of the screen The "System Tools" > "Monitors Settings" only list one setting size of "800x600" and "Auto" After trying to search for answers I have tried editing the /etc/X11/xorg.conf file (after stopping gdm and rebooting afterwards)
# ... after these lines Section "Screen" Identifier "Default Screen"
[code]...
But nothing changes.
I have also tried [ dpkg-reconfigure xserver-xorg ] but there is no prompt for resolution
Just completed a fresh netinstall of OpenSUSE. This machine previously had a Ubuntu install on it, but I was having all sorts of issues and decided I required a fresh start. The install itself went acceptably, although I ended up manually fixing GRUB.Now the system is running, I've got a ridiculous problem, in that I'm still seeing the old hostname- It used to be ubuntu-server, but should now be unimatrix-001.Checked both the obvious places (/etc/HOSTNAME & YaST), but the correct hostname is in both of them.
After a fresh install of Suse 11.4 X-system comes up with the wrong screensize 1680X1200. Instead I need 1600x1200. How can i set permanently the screensize I need ?
Just out of curiosity, what are the dangers(if any) or complications of changing from GNOME to LXDE desktop environment? And what would be the pro's and con's to such a change?
I have just installed Fedora 15. I have tried both the desktop edition and the LXDE Spin on an AMD X2 64 5800+. It's hard-drive so I select "Use All Space", meaning all the partitions will be removed and recreated. The installation completes normally, when I reboot without the CD, I get the screen with blinking cursor same as [URL]... Adding intel_iommu=off to the grub.conf did not help. I presume the default installer works correctly however the installed boot configuration puzzles me. The boot partition is /dev/sda1 and the mount point is /boot. If boot from the cd after the installation, I mount:
[code]...
Is this how it should be? This is me being new to Linux probably, but I should /boot contain the boot information if that's where the boot partition is mounted? Is there any way to "turn on debugging" so I can get a better insight on what's not happening?
setting a resolution that my monitor can't handle, and now I can't figure out how to get back to a setting that my monitor can handle. When I first made the bad setting, the screen went black except for an "Out of Range" message in the middle, and wouldn't let me see anything to put it back. I ended up going to a text screen with a <Ctrl-Alt-F1>, logging in as root, and rebooting. Now, I can use all of my other user IDs (root, KDE test, "email only," etc.) just fine, but if I log in to the one with the bad res. setting, it just blacks the screen and I have to reboot again. The xorg.conf file doesn't even have any options for setting resolutions any more, so there's no way to explicitly disallow the one I set, and "deleting" (renaming) xorg.conf didn't help.
After installing Fedora 15 from LiveUSB and rebooting it just hangs on a black screen with a blinking cursor (underscore) in the top left of the screen. If it's reached grub, it isn't responding to any commands, and mashing several key combinations (such as ctrl-alt-f1) will produce a beep usually emitted only by the BIOS (hinting that it may never be making its way to grub).
The only particularly interesting thing about the install is that by default it wanted to boot itself from the MBR on my primary-master (Windows) disk. Instead I selected the option to boot from "the first partition in sdb1", which is my primary-slave (Linux) disk, (the first partition being /boot). This way I can change which OS boots by changing the boot order in my BIOS, and so avoiding bootloader wars.
I have spent ages looking at similar problems but not not quite the same. I have installed 11.4/Gnome (x86) and wanted to use my GT430 card. I went here: 'http://en.opensuse.org/SDB:NVIDIA_drivers' and used the 'one click' install for current cards. All went ok until I rebooted and I got a 'gdm[1239]: WARNING: GdmDisplay: display lasted 0.846578 seconds' message. I got five of these in succession until the 'gdm[1239]: WARNING: GdmLocalDisplayFactory: maximum number of X display failures reached: check X server log for errors' appeared and it popped me down to an init 3 login.
So, I deleted the blacklisting conf file so that I could get back in to Gnome on Nouveau (which I did ok). I then noticed there was no /etc/X11 Xorg.conf file so I ran /usr/lib/nvidia-xconfig to generate one (which it did) - but it made no difference. I am at a loss know after spending 8 hours on this. Any pointers would be greatly appreciated. My machine is still at fresh install state so even if I have to reinstall 11.4 it does not matter.
I've been using conky for some time now, and I haven't changed conkyrc for a while. However, when I installed lucid (fresh install) conky starts wrong with ubuntu, like in a glass box that overlaps any window. The weird thing is that if I kill conky and start it over again manually (without the script in preferences->startup applications) it is OK. Screenshots: [URL].
Caution to all using ati graphics download repository. I have been using SUSE 11.4 after an upgrade from 11.3 through zypper for months. I added ati graphics as a update repository. Software update installed two ati files. I did not notice their names.
Upon installation my graphics was acting funny so I uninstalled the two ati-files figuring I'd be back to where I was. Now I can only get into terminal window after reboot at both runlevel 3 and 5; no graphics at all. I keep getting message re: display 'null' I wish to return to original graphics configuration prior to ati downloads which, I believed used xorg drivers.
I believe I either need to revise xorg.conf file back to original which was overwritten by ati process or reinstall xorg/X11 related files. I have an ati radeon HD 3450 agp card. 32 bit SUSE w/11.4 installed and running. Anyone have a sample xorg.conf that might work or some other ideas of how to get back to where I was.
As a related question, if I do a fresh reinstall of SUSE 11.4 using dvd can I save my /home files and any /filesystem files that my special software created in root directories.
I'm running OpenSuSE 11.2 with an Nvidia GeForce 8200 on board graphics card and am running the drivers installed from the file NVIDIA-Linux-x86-190.53-pkg1.run which I obtained from the Nvidia web site. I also have this vga directive on the kernel line in /boot/grub/menu.lst vga=0x346 Yet, sometimes when the system starts up it will go into 640x480 mode instead of 1680x1050. If I shutdown and restart a few times it will eventually come up in the proper resolution.
I have problem with resolution (@gnom desktop). In Yast --> videocard & monitor is all right. There is correct resolution 1366x768 (WXGA). Also the videocard ( I don't have really one, only chipset "Intel Mobile GM45" ) is correct recognized. But Monitor isn't recognized, and I don't know which one I have (It's notebook from acer).
Nevertheless if I go direct in monitor preferences (at the bottom the monitor with a ruler symbol) the resolution is set to 800x600 and I can only change to 640x480. The monitor is as 15" recognized (I have 15.4", even a bit more broadly - 1366x768) and now I don't know what to do. All symbols, all programs, everything is huge! How is it possible to configure the correct one resolution?
I installed fedora 15 and i m not able to change the monitor resolution. if I open the display settings I just get the choice between 1024x768 and 800x600.
on an older computer. I get as far as the screen that asks if I want to try or install and then I get a message saying the screen resolution is wrong and I need to reset. I even disabled the hard drive in bios and still get this message. computer was built to run xp and had ubuntu on it before. I tried to upgrade the nvidia driver and broke it.
Just tried and failed miserably to get an Nvidia 6200 based graphics card to play nice with my machine.After putting my ATI Radeon 9200 back in the box, my emulators have gone all kinds of strange.
ZSNES will crash as soon as I attempt to load a game full screen and will leave the screen resolution at the resolution ZSNES was running in (800 x 600, for example.GENS again will alter the screen resolution to whatever it was running in when the emulator is minimised. I'm running 10.10 with 1gb Ram, 128mb ATI Radeon card, P4 3ghz. Was all fine until I tried the new card and I did a fresh install only last week .
I am testing Suse 11.3 and have run into a problem with Intel's integrated graphics and resolution. Here is a dump of the hardware information I pulled from yast.
I have just installed openSUSE 11.4 a few days ago, and added nvidia propietary drivers.
After that, buttons that are selected are with two white lines. One on the top, and one on the left. I don't know what is it all about, but I think it may be nvidia's problem.
I just setup a Fujitsu s6231 lifebook with Lucid. When I boot there is no grub menu unless i press the "start" key. Then the only way i can get into the machine is by entering into recovery mode and booting in "safe graphics mode".
Everything works fine once I am able to log on the "safe graphic mode".
If i don't press the "start" key the ubuntu logo will flash for 3 seconds and then the screen goes blank and nothing happens.
I installed LXDE and want to choose each boot whether to run Gnome or LXDE. However Gnome gets started automatically without me being able to choose. Are there any config files I have to edit?
I just installed Fedora 13 on a new computer and the timed login for gnome does not work unless you manually select it. This surprised me as I upgraded a separate computer to Fedora 13 and the timed login feature still correctly functions and does not require user interaction.
Adding the above to /etc/gdm/custom.conf only adds an Automatic Login option that you have to manually select and then the computer will login. I would deem this less than useful.
I know you can substitute the timed login with the automatic login and it will instantly login, but this provides no option to select another user. I have been unable to find any information why this feature no longer works and wanted to know if there is a new way or if anyone knows why the timed login feature was crippled.
Today I decided to play with my new 11.4 Opensuse dvd. It installed and booted without any problem, and I didn't face any problem until I rebooted the computer to test my newly installed nvidia graphics drivers. openSuse wouldn't boot. Well, the important side is: there are no kernel panics, no "hit enter to restart computer" to find the reason. Just a blinking cursor after an attempt to find the kernel. I only could get out of that by pressing the reboot button. I decided to press c and boot manually:
Code: grub> root (hd0,4) Filesystem type is ext2fs, partition type 0x83 grub> kernel /boot/vmlinuz-2.6.37.1-1.2-default
and the computer just froze. At this stage pressing tab for autocompletion at kernel line freezes the computer, too.
Maybe additional boot parameters?
Well, considering that installation brought me to a desktop, the system seems to be up and ready to run. Nothing seems wrong with my menu.lst:
Code: title openSUSE 11.4 root (hd0,4) kernel /boot/vmlinuz-2.6.37.1-1.2-default root=/dev/sda5 initrd /boot/initrd-2.6.37.1-1.2-default (I did not install a bootloader with openSUSE. This is legacy grub bootloader of Debian)
I'm stuck at 800x600, and no matter what i try i seem to hit a dead end. I've got the Intel Mobile 945GM/GMS rev 03, and it seems like lots of people have had to fiddle to get it working. Here's the info I've collected and tried so far. Ubuntu Edgy On Intel 945GM Graphics & Wide Screen LCD NoteBooks � 100% Linux Addict
HOWTO: install drivers and set up widescreen res. with Intel 945 vga card and Ubuntu - Ubuntu Forums Mostly Harmless: SuSE, Acer aspire 5580 and non-standard resolution 1280x800 Intel 945gm And 1280x800 Laptop Monitor Problem Suse 10.2 - openSUSE Forums I'm not too proficient with linux yet, so the right solution might be here and I'm just not getting it right. Maybe i'm not on the right path at all.
I have been using Debian for 3 or 4 years, I have never used LXDE before. After several attempts and searches through google, I succeeded to change the screen resolution to 1024x768 but LXDE is retaining this resolution for only one session: I have to change the resolution every time I use LXDE.
This is what I have in ~/.config edbarx@edbarx-pc:~/.config$ ls -l total 72 drwxr-xr-x 2 edbarx edbarx 4096 Mar 19 14:41 akonadi
Whenever I tried to install LXDE using the 1-click install, YaST2 just freezes and doesn't respond and doesn't install anything. In fact, YaST2 always freezes whenever trying to install a program with the 1-click install.
So my question is, How do you abort YaST2 from installing because obviously the Abort button doesn't even work! And lastly, how can I install LXDE through the terminal as I always never have a problem installing something through the terminal.
I'm running an old P3 with 512 of Ram.I installed Opensuse 11.2 with the KDE desktop, and then I went online and used the one-click install to install the LXDE desktop.Now I'm trying to get my machine to boot directly to LXDE.If I end a KDE session, I can select LXDE as a new session and get into it fine. It seems to run well on this machine. But if I shutdown from LXDE, my next boot sends me straight into KDE. It seems the only way I can get to LXDE is to be in KDE first, which is kind of defeating the whole reason why I wanted a light weight and quick booting desktop for this machine.Am I missing something? I thought Opensuse automatically rebooted back into whatever desktop was used last?
