Ubuntu Multimedia :: Wrong Screen Resolution Options On Media Centre
Apr 22, 2011
I have a desktop with nvidia 9300 connected to a 37" LG hdtv lcd with a VGA analog cable. I'm using this machine as a media center. Up until now it had a windows XP and (besides the fact that it had windows) it work with the correct resolution - 1920x1080. I've installed Ubuntu (the latest available) after to many crashes during hd movies...
I installed the nvidia restricted drivers (the display is plain black otherwise) and my tv is being recognized as a CRT monitor. Guess it's because I'm using the vga connector instead of the dvi one. The problem is that the highest resolution it let me choose is 1024x768. I tried to mess around with the xorg.conf but i discovered it doesn't exist.
View 1 Replies
ADVERTISEMENT
Aug 13, 2011
I have yet to install Ubuntu on a machine that shows screen resolution options higher than 1024x768. Is there a (GUI) way to turn on the missing options? I'd rather not have to go into that while xorg.conf thing if I don't have to. In other operating systems, I load it and set the resolution to what I want, they just show up. Why is it so hard in Ubuntu (and most Linux's in general)?
View 9 Replies
View Related
May 2, 2011
I've just upgraded from Debian Lenny to Squeeze. It didn't go as smoothly as I had hoped, one of the casualties being the proprietary nvidia driver I had previously installed. So I fixed that using the 'Debian way' rather than NVIDIA's installer, and that is now all fine. So far so good. However, when I boot up, pre starting X, my screen is a much lower resolution than it used to be (640x480, I think). Really chunky and ugly as it runs through the start up scripts. I assume that somewhere early in the startup scripts the nvidia driver is being loaded and set to a low resolution. Can someone advise me where this might be, and what to look for? Am I on the right track? I stress that this is before X is started. Once X has started the screen resolution is as I want.
View 4 Replies
View Related
Oct 24, 2010
I've got a HD screen: 1920x1080p. Grub (1.98 ) has the resolution: 800x600 and Plymouth also. It is irritating me that plymouth shows a very ugly purple splash screen in a very low resolution (800x600). How can I fix that? I've got an ATI Radeon HD 4670, and use the drivers from ATI...
View 8 Replies
View Related
Jun 15, 2011
add a 16:9 screen resolution to Ubuntu. I have a Toshiba Satellite laptop running latest Ubuntu-64 hooked up to a Bravia TV (the laptop screen is non-functional) via VGA. The TV does not have a zoom function for the PC input. I would like to watch internet video on the TV and have it fill the screen. All of the available screen resolutions in Ubuntu that the TV recognizes are 4:3. I would like to add 1920:1080, but any 16:9 resolution would work.
View 1 Replies
View Related
Feb 11, 2010
i have just tried ubuntu 9.10 runing the "try ubuntu without changing" mode and the screen resolution was totaly off, it was 800 x 600 and there was only one other optinion wich was even worse , my screen res on windows is 1366 x 798.... Is this a problem that would rectify itself if i installed ubuntu properly or is there something i need to do?
View 9 Replies
View Related
Jul 25, 2010
I am new to Linux (Ubuntu 10.4 LTS on a Thinkpad T40), now just two days, and had everything working nicely. But since I wanted a better higher resolution I tried to set the monitor resolution to a higher value. After selecting a higher resolution first the screen went black and now it has a white background and is steady but has flickering areas. The system is still working. How can I go back to the resolution that was working?
View 2 Replies
View Related
Sep 20, 2010
on an older computer. I get as far as the screen that asks if I want to try or install and then I get a message saying the screen resolution is wrong and I need to reset. I even disabled the hard drive in bios and still get this message. computer was built to run xp and had ubuntu on it before. I tried to upgrade the nvidia driver and broke it.
View 3 Replies
View Related
Jan 8, 2011
I just installed drivers for this nVidia GPU from the website. Now, whenever I boot, the screen resolution goes to 1024x768 instead of 1280x800 like I want it to. I have to change the screen resolution every time I boot into Ubuntu.
View 5 Replies
View Related
Jun 14, 2010
I am a first time user and recently installed 9.10 from a LiveCd then immediately upgraded to 10.04 LTS. I had no black screen problem, but my resolution is stuck at 640x480 with no other options. I upgraded my driver to NVIDIA-Linux-x86_64-195.36.31 and the resolution remains the same. I have a Geforce GTS 250 and an Acer H233H capable of 1920x1080_75.
My XFile:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder62) Thu Jun 3 09:41:37 PDT 2010
# xorg.conf (X.Org X Window System server configuration file)
# This file was generated by dexconf, the Debian X Configuration tool, using values from the debconf database.
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
# This file is automatically updated on xserver-xorg package upgrades *only* if it has not been modified since the last upgrade of the xserver-xorg package .....
I have tried entering a CVT generated modeline to the xorg file but it did nothing.
View 2 Replies
View Related
Jul 8, 2011
I can open the software centre but it doesn't load any options - simple a titled blank box
View 9 Replies
View Related
Jun 15, 2010
I have problem with resolution (@gnom desktop). In Yast --> videocard & monitor is all right. There is correct resolution 1366x768 (WXGA). Also the videocard ( I don't have really one, only chipset "Intel Mobile GM45" ) is correct recognized. But Monitor isn't recognized, and I don't know which one I have (It's notebook from acer).
Nevertheless if I go direct in monitor preferences (at the bottom the monitor with a ruler symbol) the resolution is set to 800x600 and I can only change to 640x480. The monitor is as 15" recognized (I have 15.4", even a bit more broadly - 1366x768) and now I don't know what to do. All symbols, all programs, everything is huge! How is it possible to configure the correct one resolution?
View 6 Replies
View Related
Jan 21, 2010
in my media pc i have a geforce 8400, attached to a 32" 720p lcd using a dvi to vga adapter, and it is miss detecting the resolution it detects the resolution as 1080p, so when i try to enable full gpu scaling it gets the resolution wrong resulting no image on the screen. how do i manualy set the "back end resolution"
View 6 Replies
View Related
Jan 1, 2011
After closing some game my display resolution turned into 640x480 so I tried to modify xorg.conf to the following but I noticed that there are disappeared sides (at right & left) in my monitor and fonts appear small and ugly! How can I fix this issue?
[Code]...
View 2 Replies
View Related
Jun 3, 2011
TV hardware, convert a windoze XP media centre to a Linux os system. Windows XP Media center , a nice box but need to move on, the motherboard fried on the piece of S HP box but after replacing it my TV tuner card will not be recognized by Linux. MythTV doesnot or will not see it.
View 2 Replies
View Related
Apr 2, 2010
I'm having problems adjusting my screen resolution. I'm using Nvidia Geforce FX5300 video card and Samsung T220P LCD screen with resolution of 1920x1200. After installing the Nvidia driver I went to system -> preferences -> display in order to change the resolution to 1920x1200. Unfortunately, the available resolutions were only 640x480 and 320x240. I tried to set the resolution manually, using the advanced button, but when I did this everything was extremely big on my screen.
View 1 Replies
View Related
Jan 12, 2010
I can't increase my screen resolution to higher than 800x600. In Windows I have a 1024x768 resolution. This is my xorg.conf file
Code:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
[code]....
View 9 Replies
View Related
Dec 16, 2010
I have my Xubuntu box connected to a 1920x1200 LCD monitor via a KVM switch. If the KVM is set to the Xubuntu box when I boot, all's well, but if the KVM is set to the other machine, Xubuntu boots into a 800x600 resolution. This behavior started with Maverick, when I was running Lucid. the correct resolution was set no matter the position of the KVM switch. Is there some place in Maverick that I need to set the resolution to 1920x1200 so it is set correctly regardless of the KVM?
View 1 Replies
View Related
Jul 31, 2011
I know this is probably a stupid question , but I started using Ubuntu 11.04 .
My screen resolution on windows was 1600x900
But on ubuntu (even after installing proprietary drivers) the highest I can get is 1024x768 .
I tried using xandr but couldn't work it out .
My xandr info
When i tried adding a new mode using the command
I got the following error
Now I'm not sure what VGA refers to , but Im using a vga port to connect my monitor
Also I'm using only one monitor.
View 9 Replies
View Related
Apr 7, 2010
Does anyone know where to manually set screen resolution in the new 10.4 beta? Used to be in xorg.conf, but it appears that it doesn't exist in this release.
View 2 Replies
View Related
Apr 21, 2010
My screen resolution keeps reverting back to the default resolution 800x600. I'm using ubuntu 10.04, but had the same problem on 9.10 on my Acer Revo r3600 ION. I am able to change the resolution to 1280x1024 but have to do it by the nVidia configuration tool. The tool then allows me to 'Save to X Configuration'which it appears to have done successfully.See the sections from my 'etcx11xorg.conf' file. This is the state of the file after a reboot by the way.how I can get my desired resolution to persist after I reboot?
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
View 2 Replies
View Related
Apr 29, 2010
After update from 8.10 to 9.10 I have screen resolution 1440x900, which is not supported by my monitor. Following changes had no effect on my screen resolution
xrandr:
Code:
$XAUTORITY=/home/zuker/.Xauthority DISPLAY=:0.0 xrandr --output default --mode 1024x768
XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0"
xorg.conf
Code:
Section "Screen" ...
Subsection "Display"
Depth 24
Modes "1024x768"
Virtual "1024 768"
EndSubSection
View 9 Replies
View Related
May 21, 2010
I installed 10.04 on my former windows box last night, and I seem to be stuck at a screen resolution of 1024x768. I have a Geforce 7600 GT graphics card, and I installed current drivers via the hardware drivers option. I can't go above this resolution in the nvidia x-server settings, and even xrandr says the highest resolution I can use is 1024x768. What is up with that, and how can I change it?
View 1 Replies
View Related
Jun 23, 2010
I have been arguing with my acer aspire one laptop since I bought it in terms of the screen resolution and have never been able to solve the problem, although I seem to be getting close. I just updated to 10.04 (the netbook remix).I have been following the instructions for how to fix it here. The result was this:
Code:
liz@Pippin:~$ cvt 1366 768
# 1368x768 59.88 Hz (CVT) hsync: 47.79 kHz; pclk: 85.25 MHz
[code]....
View 3 Replies
View Related
Jan 5, 2011
I have tried EVERY solution that has been posted. the nVidia forumswon help. Every solution that involves editing the .conf file crash my system. I wanna have real resolution for my monitor not be stuck at this 800x600 bull$#!tnVidia Graphics CardPlanar PL1700 Monitor
View 1 Replies
View Related
Mar 5, 2011
I recently installed Ubuntu 10.04 in my computer, I ran update manager and installed all the actualization but and I can not set the screen resolution higher than 800x600; I have windows XP installed in another partition and the screen resolution can get to 1028x1024 at 85 hz. I have a Pentium 4, 2.20 ghz, 1gb ram, and the video card is a SiS (Silicone Integrated Systems) 300/305/630/540/730 32 Mb.
View 4 Replies
View Related
May 3, 2011
I'm trying to change the output resolution of a HTPC that's connected to a 720p plasma from (an auto set) 1024x768 to 1280x720 so that the output is the correct 16:9 ratio for the plasma.The HTPC is running Ubuntu 11.04 with a GeForce 7600GT and is connected via VGA cable to the plasma. The plasma automatically detects the PC input as XGA.
The worst effect of this is 16:9 media (video clips etc) looks really stretched out with the letterbox bars on the top and bottom and icons in general don't look square.Nvidia driver has been activated via Additional Drivers but the message reads;
Quote:
The driver is active but not in use"
Any ideas what that means? Should I be looking for a way to disable whatever the Ubuntu driver is so the proprietry one is in use?Under nVidia Xserver settings I don't have an option for a 1280x720 resolution, the next closest resolution for 16:9 is 1360x768 but then portions of the output are no longer visible on the plasma.Could it be as simple as using the DVI output (not the VGA) from the graphics card to the plasma to get a correct reading of the input. Still, I wouldn't have a setting for 1280x720
View 4 Replies
View Related
May 15, 2011
After upgrading to 11.04, my screen resolution was reset to 1024x768. As the native resolution for my monitor is 1920x1080, I went to reset that. The resolution didn't exist in the Monitors applications, so I did the following:
Code:
kane@Griffin:~$ cvt 1920 1080 60
# 1920x1080 59.96 Hz (CVT 2.07M9) hsync: 67.16 kHz; pclk: 173.00 MHz
Modeline "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync
[Code].....
The monitor adjust, but most of the screen shows tearing and doesn't update correctly. Hard to explain, so I attached a screenshot at 1024x768, working normally, and 1920x1080, fubar. I've cropped these images to get them to fit the forum limitations, but they still show the issue.
My monitor is an LG Flatron W2253TQ, my graphics card is an ATI Radeon HD 4650, although the manufacturer is Biostar. I'm using the default free drivers.
View 2 Replies
View Related
Nov 20, 2010
Been having some problems renaming a mp3 player. When I connect it to my computer it shows us like in the image I have attached below. I have tried to rename the media by going into its properties (no luck) and then tried to use gparted, but while I can select it, all the options are greyed out.
View 9 Replies
View Related
Feb 14, 2016
I just changed the desktop on my thinkpad from awesome to i3. And now I have some very strange issues with the screen resolution. Because at home I use this x60 thinkpad on a dockingstation and a 19" display. As long as I used Awesome as my Desktop, the display manager as well as the desktop itself could handle the different screen resolution depending on if I'm out with just my 12" on my thinkpad or with the much bigger screen on my home 19" display.
I can understand that i3 maybe cannot handle this alone and I need xrandx to enforce the screen resolution. But why is the display manager (lightdm) also affected by this change? What is so different that even the DM cannot find the proper screen resolution?
View 1 Replies
View Related
