Slackware :: Nvidia Wrong Resolution After Installing Proprietary Driver
Apr 26, 2011
I'm new to linux, and i have installed linux slackware 64bit..after a complete setup i downloaded the latest Nvidia proprietary drivers, the binary package from nvidia.com..i have a geforce gts250..it's the first time i encounter this issue..i have already installed the driver with my old monitor (an lg flatron with max 1680x1050)and it always worked fine..with this new monitor (lg w2243s with a res of 1920x1080) it seems that every bin package from nvidia don't recognize the monitor...after installing i find a res of 640x480 and i get stucked, i tried to force it by editing the xorg.conf file..but nothing changes..how can i get the max res with nvidia bin package?
View 3 Replies
ADVERTISEMENT
Dec 20, 2010
I recently installed Fedora 14 KDE and NVIDIA proprietary driver for GeForce FX 5200. I'm able to change the resolution to 1920x1080 (Acer H213H 21.5" lcd monitor), but when I restart the box, I lose these settings and I have to fiddle with NVIDIA and KDE monitor settings until I get the settings back.
Here is my xorg.conf file:
Code:
Is this (in)correct? What else can I try in order to keep my resolution at 1920x1080? When I restart, it reverts to 640x480.
I didn't have this problem before installing NVIDIA driver, however, I had visual anomalies and slowness in video refresh/repaint whenever moving windows. I don't want to go back to that so I'd like to see how to permanently propagate my resolution settings through reboots of this box. I've search multiple forums with no relevant hits as far as I was able to discern.
View 7 Replies
View Related
Oct 7, 2010
I've been trying to install the driver for my NVIDIA GeForce 6150SE nForce 430 in Slackware 13.1 with no success. I always get the same error report: the module you're trying to build does not match the kernel source or something like that. The result: unable to build module and the installation crashes.
I have tried to:set a custom kernel source path, install it with the slackbuilds driver and kernel, extract the contents and trying to compile it myself, find possibly conflicting drivers or modules, use different versions of the same driver (I've tried installing the versions 256.53, 256.44, 195.36.31 and 173.14.27)recompile the Linux kernel in an attempt to make sure that the tools used to build the kernel were the same used o build the module.
The only time I got a different error message was when I used the slackbuild packages. It built the 'nvidia.ko' module, but it didn't work. I got a version magic notice when booting and, when I tried to start x, a fatal error "no screens were found."
Just to be sure, I made a clean full install of Slackware (only added WICD to be able to download the drivers and ran slackpkg update and upgrade all) and tried again. It didn't work.
View 14 Replies
View Related
Dec 15, 2009
I've been trying to figure out the cause of system hangs with slack 13 for a a week or so. I get random total freezes with the keyboard LED's blinking at me and the only solution is to do a hard-reset. I was using a self-compiled 2.6.31.6 kernel on 32bit Slack with similar results, but thought it had more to do with several bad starts as I got used to Slack's way of doing things... eventually I decided I'd made enough bad starts with that installation and after reading a bit about _current fixing some stability issues added another installation to my machine using Slackware64 and upgrading to _current. It worked great, then I installed the NVIDIA proprietary driver. The system hangs are back.
Sometimes they happen quickly, sometimes they take hours, sometimes while I'm working, sometimes when the machine has been idle for hours. For a couple of days I've been going back and forth between the NVIDIA propreitary and the nv driver. I've run memtest86 for 4.5 hours and not a single error, I'm running this on a new HD, I even upgraded the case fan (the old one was starting to complain!).
I've also installed different versions of the driver 185.x.x, 190.42.x. I've used slackbuilds, I've used "sh NVIDA.xxx.RUN" I've said "yes" to everything the installer asked, I've said "no".
So far no hangs with the nv driver. I've been leaving one or the other running at all times and no hangs with the nv driver, but within hours with the proprietary driver.
All that is to say I'm confident the issue is with the NVIDIA proprietary driver, OR something in my kernel options that only shows up when I'm using the NVIDIA driver.
Is anyone else running this successfully?
SLACKWARE64 kernel 2.6.32 (same behavior on 32bit with 2.6.31.6) compiled kernel with "make oldconfig" then "make localmodconfig" BEFORE the NVIDIA driver was installed. ext3 filesystem (same behavior with ext4 on previous installation)
View 14 Replies
View Related
Jan 23, 2010
I'm having an issue where the proprietary nvidia driver seems to crash my system. the weird thing is that it only happens if i have already started an X session. here is what i mean. i don't use a display manager so i invoke X by running startx. now if i run it for the first time it starts no problem. but if i kill X with ctrl-alt-backspace and then try to run startx again it just hangs and the machine completely freezes up. this only happens with the proprietary nvidia driver. if i use the vesa driver it works fine. the open-source nvidia driver doesn't seem to support my card: GeForce GT220. i never had this problem with slackware 13 x86. i have tried using the 190.42 version from slackbuilds.org as well as the latest version from nvidia's site 190.53. aside from this problem it seems to work fine otherwise.
View 14 Replies
View Related
Jul 21, 2010
since i installed nvidia proprietary driver on opensuse 11.3 my boot-image is gone. This is not really in issue but i would like to have it back. is there a way to get it back or a bootimage howto or something?
View 5 Replies
View Related
May 20, 2010
Very new to linux, just downloaded Ubuntu 10.04 and installed it, dual boot, no problems with initial installation.
Trying to install graphics card driver for:
01:00.0 VGA compatible controller: nVidia Corporation G92 [GeForce 8800 GTS 512] (rev a2)
Using Administration -> Hardware Devices
I selected the recommended driver and clicked activate. Download started then failed with error message:
SystemError: Failed to fetch http://gb.archive.ubuntu.com/ubuntu/...ntu3_amd64.deb Connection failed [IP: 91.189.88.30 80]
Screenshot attached.
Tried several times now and the download doesn't even seem to start any more.
My Internet connection is 3 mobile broadband, which may have something to do with it, bit it seems to be working well at the moment.
View 1 Replies
View Related
Jan 8, 2011
I just installed drivers for this nVidia GPU from the website. Now, whenever I boot, the screen resolution goes to 1024x768 instead of 1280x800 like I want it to. I have to change the screen resolution every time I boot into Ubuntu.
View 5 Replies
View Related
Nov 18, 2010
I just received my laptop this week and have been tweaking my laptop to acquire more stability. I just installed the NVIDIA proprietary drivers for the NVS 3100M chipset and I have a residual windows that wont disappear even after reboot. Even after reinstalling the NVIDIA driver it stays. Is there some way to flush the framebuffer?
View 8 Replies
View Related
Aug 1, 2010
My native resolution is 1366x768.
View 8 Replies
View Related
Oct 9, 2010
I started a thread asking for advice in the hardware forum. I didn't want to post a duplicate thread, but I was unable to get it moved here, so I'm kindly asking you slackers to help me install the aforementioned driver.
View 1 Replies
View Related
Jun 13, 2011
There is one thing missing (I think) a clear guide to clearing out Nvidia and replacing it with nouveau. For all but hardened gamers, nouveau on 11.4 delivers. It also removes one more barrier to what I think is the intended goad of Tumbleweed.The problem IMHO is not that there are no clear guides. The problem is there are too many. No sooner does one person do a guide (that is clear) and someone else who does not like some point writes another guide that they think is more clear (but in fact is less clear in other aspects). And this goes on ad infinitum.IMHO we have too many guides - many of which are sufficient clear ... but the VAST number only serves to confuse users more.
Having typed that, IMHO this is NOT a Tumbleweed specific issue, but its MUCH WIDER in scope and hence does not belong as a discussion in this Tumbleweed thread.
View 9 Replies
View Related
May 22, 2011
how to install this driver?
I disabled X server and I blacklisted nouveau kernel, but when I try to install the driver it says Error: Could not create the kernel module.
View 14 Replies
View Related
Jan 2, 2011
After compiling the 2.6.36.2 kernel and re-installing the Nvidia proprietary drivers, my touchpad has started to act strange; the cursor seems to glide a lot faster, yet more erratic and when I try to hover over an icon the cursor wont stay still, furthermore I lost the ability to 'click' on anything using just touchpad.
I have checked dmesg and Xorg.log for any clues, as well as removed everything with the exception of the card and device section from my xorg.conf. The issue has nothing to do with compiling the new kernel, as it was working perfect until I installed the Nvidia driver.
View 1 Replies
View Related
Jul 26, 2010
I have an nVidia GeForce 7600GS with a dual monitor setup. A 19" Dell @ 1280x1024, and a 19" widescreen Acer @ 1440x900. The Dell is attached via DVI, and the resolution is detected properly, and set, but the Acer is connected via VGA, and so the native resolution is unkown to the nvidia control panel. It will only let me set the resolution up to 1024x768. I had it create the xorg.conf file, and i tried to edit it manually, changing its
[Code]...
View 9 Replies
View Related
Aug 26, 2011
I've recently jump from the Ubuntu/Mint ship, and figured I've give a polished KDE distribution a shot. Of course I turned to OpenSuSE, and I love it so far. I've resisted KDE quite a lot since 4.x came out but it's really come along. Much better than the (in my opinion) monstrous disaster that Gnome has become.
Anyways, on to my problem: I've installed the proprietary Nvidia drivers via the one-click-install shown in the wiki, and that worked great. But now my resolution at boot - that is the boot/loading screen, not my desktop - is shown at a very low resolution instead of my native resolution, like it was with OpenSuSE's default open-source Nvidia driver, which I'm guessing is Nouveau. On Ubuntu, this was pretty easy to correct; all you had to do was edit /etc/default/grub and put your resolution there, and tinker with some other options so that instead of Plymouth trying to set its own, it just carries over Grub's specified resolution. But I can't seem to do that with OpenSuSE. For one, I don't see /etc/default/grub, and more than that, I don't think you guys use Plymouth. I could be wrong on that second point, though. So, how can I change the boot screen's resolution to my native resolution? I'm using the latest Stable release (11.4) and latest Nvidia drivers. Other than that, the install is new.
View 5 Replies
View Related
Oct 20, 2010
I have a BIG issue with my fresh Maverick install : when I install proprietary drivers via the graphic utility, either one proposed, the screen resolution is then max in 640x480. But I have hardware acceleration and compiz effects !
I tried, I think, everything. Forcing the resolution in xorg, in monitors.xml, try the newest ones via the ppa, install an older (and used to be working I'm positive) one with .run (which just prevent any graphic display).
View 9 Replies
View Related
May 31, 2011
I did a clean install of Ubuntu 11.04 on my desktop which has a Nvidia GForce 7300LE card. Installation was successful, however, the moment I install Nvidia Current driver the system hangs. The only way I was able to get the system working was by doing a fresh install.
View 4 Replies
View Related
Feb 20, 2016
Debian Jessie kernel 3.16.0 AMD64. Legacy GeForce 66oo GT video card.
I just re-installed Jessie via Debian non-free DVD. When I run apt-get update && apt-get upgrade, the screen says to the effect :
"Before Nouveau can be used, must remove Nvidia config from xorg.conf and xorg.conf.d"
Is there a simple way to keep Nouveau and blacklist or prevent Nvidia driver from being automatically installed in the first place?
View 6 Replies
View Related
Sep 1, 2010
I have used the NVidia proprietary drivers for awhile. Yes, I know about nv and I even know about the prepackaged ones, but I've never minded getting the latest from NVidia, dropping out of X, and running the install which automatically rebuilds everything.
I recently took the synaptic update to 2.6.32-24. It worked fine and -- I guess -- migrated my driver. I didn't think about it. For no particular reason today I tried to build the latest NVIDIA driver (256.53 -- had been on an earlier 256 series). The build failed with some conftest failures. Even trying to rebuild the working driver failed. Reverting to 2.6.32-23 allowed both to be built and they work. So something the NVIDIA installer is expecting headerwise must be different between 2.6.32-23 and -24.
View 5 Replies
View Related
Nov 23, 2010
Installing Mythbuntu 10.10, which I finally got installed properly. At first I installed the open-source video drivers just to make sure the installation worked, then I installed the "version current" proprietary drivers using the graphics drivers manager...tool...thing. However, when I restarted the computer, it has a text-mode splash screen and I stay in the first virtual terminal.
If I try to go to the GUI "terminal" [Ctrl-Alt-F7], it appears to be partway through some kind of check:
Code:
I ran sudo dpkg-reconfigure xserver-xorg to try to get back to the open-source drivers, but it didn't give any text output and went straight to the next line of command prompt, when I restarted it did the exact same thing. Any tips for at least getting back to the open drivers? I'd like to not have to reinstall again (I'm dual-booting WinXP,). The card in question is a GeForce 6200 AGP.
View 6 Replies
View Related
Apr 16, 2010
I've been getting a little discouraged with my laptop and I've been finding a lot of machines with gt310m graphics. The driver page last I checked didn't list this as being supported by the proprietary driver, I was just wondering if there's anyone that has tried it, and what the results were.
View 1 Replies
View Related
Mar 8, 2011
I currently have an nvidia card (GeForce 8800 GTX) and use the proprietary driver since I game a lot on wine (games like mass effect 2, prince of persia 2008, and some more recent games). I was wondering if using an equivalent ATI card with the free driver would show the same performance as my current on, or if the ATI driver isn't THAT mature yet. Would I be able to play the latest games with it on wine, or am I better of with nvidia and the propietary driver.
(I definitely know nouveau doesn't stand up to it *yet*, i.e., Prince of Persia complains about lack of video features). (note I don't care about a nouveau vs radeon debate, nor for a nvidia vs ati debate, the question is ati+free vs nvidia+propietary).
View 2 Replies
View Related
May 2, 2010
Everything works great at the moment, no hardware problems or anything like that. But whenever I enable the proprietary nVidia driver 185, it causes the boot screen to not come up, Ubuntu stops recognising my sound-card and refuses to work and when I try to shut down or restart, it just takes me back to the log in screen. When I remove the driver, everything works okay again.
View 3 Replies
View Related
Apr 25, 2011
I cannot find the correct command to uninstall the Nvidia blob, can anyone point me to the right one that removes the latest drivers?
View 1 Replies
View Related
Feb 4, 2010
I have a CentOS 5 virtual machine (VMware Workstation 7) running under a Windows host, and need the workstation's NVidia graphic card (Quadro NVS 295) to work optimally for my data analysis tools.
When I try to install the Linux driver from NVidia's webpage, I get "You do not appear to have an NVIDIA GPU supported by the 190.53 NVIDIA Linux graphics driver installed in this system". I have found my workstation's graphic card in the list of supported graphic cards in the README.
I suspect this has to do with VMware's own graphics controller having taken over, because when I do "/sbin/lspci" I see: 00.0f.0 VGA compatible controller: VMware SVGA II Adapter
Does anyone out there know how I can let the NVidia driver get installed and take over (it looks like I need its newest version for my software to render properly)?
View 2 Replies
View Related
Mar 29, 2011
I've given it the old college try for a couple years, starting with openSUSE 11.1 without success. I'm up to 11.4 now with no change or relief. My openSUSE box with NVIDIA proprietary driver and the default refresh settings of 80KHz/75Hz, has an annoying beat frequency with... something, somewhere, causing an annoying ghostly flicker on my trusty 1280x1024 LCD display. I can run both openSUSE and Windows XP on this hardware and they both have the same annoying flicker at those settings. However, in Windows XP, all I have to do is select a 70Hz refresh, resulting in settings of 74.6KHz/70 Hz, and the annoying flicker is cured... for Windows only, of course. I have tried to change these settings in openSUSE to no affect. In 11.4, I find that the advice is to create modelines using CVT and edit xorg.conf, but despite rigid adherence to instructions, there's no change. The monitor continues to see refresh settings of 80KHz/75Hz and the annoying flicker persists.
I hate to rag on openSUSE since it does so many things well, but there's a number of adjustments I'd like to make, especially the vertical refresh, that simply won't change, even when following documented or testamented procedures. Concentrating on the vertical refresh for now, is there anything that really works?
View 3 Replies
View Related
May 26, 2010
I am using the most recent ubuntu kernel (2.6.32-22-generic) for general stuff, and a real time kernel (2.6.31-10-rt) for music recording. Everything was working fine under Karmic.
When I upgraded to 10.04, I had problems with my Nvidia video card, so I uninstalled everying related to Nvidia. And reinstalled the driver using the installer script from the Nvidia website.
I can install the driver for one kernel, but when I boot on the other, it says my X config does not work, and I am back to a low-res no-effect display.
If I then try to reinstall the driver under that kernel, then the first one stops working with the Nvidia driver.
View 1 Replies
View Related
Dec 17, 2010
I'm using ubuntu 10.10 with the proprietary Nvidia-driver for my graphics card. I'd like to switch to the open source Nouveau driver. What is the best way to go about this?
View 9 Replies
View Related
Apr 22, 2011
I have a problem that pops up with some games, sometimes: sauerbraten, lugaru, and nexuiz being the ones that pop to mind.
The problem is that when the game starts/loads the mouse "cursor" in the game will not work... the thing is frozen. The "fix" is to jump to a virtual terminal, via alt-ctrl-1, and restart KDM, then I log back into the session and everything is working swell.
This problem does not occur in Osmos, World of Goo, Warzone 2100, or the Linux Ryzom client.
I thought about adding an explicit /etc/init.d/kdm restart in my /etc/kde4/kdm/Xreset file, but that seems too draconian.
This has been a recurring problem on several machines with several 7000, 8000, and 9000 series Nvidia cards running under the proprietary driver, on both 32-bit and 64-bit AMD processors ever since Lenny and up through Wheezy. And it occurs on the following desktop/windowing environments: KDE4.4, icewm, fluxbox, blackbox, E17.
I would guess that it's a driver issue or a driver+xorg configuration issue.
PS: Please don't suggest that I should use the open source driver.
View 4 Replies
View Related
