General :: Wrong Monitor Resolution Set And Now Screen With Many Colors
Jul 25, 2010
I am new to Linux (Ubuntu 10.4 LTS on a Thinkpad T40), now just two days, and had everything working nicely. But since I wanted a better higher resolution I tried to set the monitor resolution to a higher value. After selecting a higher resolution first the screen went black and now it has a white background and is steady but has flickering areas. The system is still working. How can I go back to the resolution that was working?
On my Acer laptop wit ATI Xpress 1100 I have a native resolution of 1280 x 800, and Linux Mint 8 (of the Ubuntu family) offers that resolution without a problem. However, a few days ago I connected my laptop to my TV, and since then the correct resolution setting has been LOST. It doesn't appear anymore in the Display settings and so I had to choose a lesser resolution - I am now looking at a less sharp screen! How can I delete it? I hope that I don't need to reinstall...
I've just upgraded from Debian Lenny to Squeeze. It didn't go as smoothly as I had hoped, one of the casualties being the proprietary nvidia driver I had previously installed. So I fixed that using the 'Debian way' rather than NVIDIA's installer, and that is now all fine. So far so good. However, when I boot up, pre starting X, my screen is a much lower resolution than it used to be (640x480, I think). Really chunky and ugly as it runs through the start up scripts. I assume that somewhere early in the startup scripts the nvidia driver is being loaded and set to a low resolution. Can someone advise me where this might be, and what to look for? Am I on the right track? I stress that this is before X is started. Once X has started the screen resolution is as I want.
Sometimes, randomly, when turning on my Ubuntu laptop (HP 6730b, Ubuntu 10.04) I get a wrong monitor setting (much lower resolution than normal) and it is not possible to set it correctly because the menu buttons are wrongly placed and some are not present (probably there is not enough room for them) I have no other way than to restart the system to get the right resolution. Can someone tell me this inexplicable (to me) behaviour? Of course I didn't change anything in monitor settings...
I have problem with resolution (@gnom desktop). In Yast --> videocard & monitor is all right. There is correct resolution 1366x768 (WXGA). Also the videocard ( I don't have really one, only chipset "Intel Mobile GM45" ) is correct recognized. But Monitor isn't recognized, and I don't know which one I have (It's notebook from acer).
Nevertheless if I go direct in monitor preferences (at the bottom the monitor with a ruler symbol) the resolution is set to 800x600 and I can only change to 640x480. The monitor is as 15" recognized (I have 15.4", even a bit more broadly - 1366x768) and now I don't know what to do. All symbols, all programs, everything is huge! How is it possible to configure the correct one resolution?
I've got a HD screen: 1920x1080p. Grub (1.98 ) has the resolution: 800x600 and Plymouth also. It is irritating me that plymouth shows a very ugly purple splash screen in a very low resolution (800x600). How can I fix that? I've got an ATI Radeon HD 4670, and use the drivers from ATI...
i have just tried ubuntu 9.10 runing the "try ubuntu without changing" mode and the screen resolution was totaly off, it was 800 x 600 and there was only one other optinion wich was even worse , my screen res on windows is 1366 x 798.... Is this a problem that would rectify itself if i installed ubuntu properly or is there something i need to do?
I've been working my butt off all day now trying to get the nvidia drivers installed and then (the hard part) get dual screen to work properly with them installed. Finally I've gotten to the point where both of my screens are working perfect but now the login screen is on the second monitor instead of the first monitor for some reason I do not know.
Here's my xorg.conf:
Code: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 1.0 (buildd@crested) Sun Feb 1 20:25:37 UTC 2009 Section "ServerLayout" Identifier "Default Layout"
one of them is a TV with an HDMI input. The login screen shows up on the tv, so if someone is watching a movie, I have to pause it to switch inputs and login. Other than that, everything is fine. How do I get the login screen to show up on the main monitor?
on an older computer. I get as far as the screen that asks if I want to try or install and then I get a message saying the screen resolution is wrong and I need to reset. I even disabled the hard drive in bios and still get this message. computer was built to run xp and had ubuntu on it before. I tried to upgrade the nvidia driver and broke it.
I have a desktop with nvidia 9300 connected to a 37" LG hdtv lcd with a VGA analog cable. I'm using this machine as a media center. Up until now it had a windows XP and (besides the fact that it had windows) it work with the correct resolution - 1920x1080. I've installed Ubuntu (the latest available) after to many crashes during hd movies...
I installed the nvidia restricted drivers (the display is plain black otherwise) and my tv is being recognized as a CRT monitor. Guess it's because I'm using the vga connector instead of the dvi one. The problem is that the highest resolution it let me choose is 1024x768. I tried to mess around with the xorg.conf but i discovered it doesn't exist.
I just installed drivers for this nVidia GPU from the website. Now, whenever I boot, the screen resolution goes to 1024x768 instead of 1280x800 like I want it to. I have to change the screen resolution every time I boot into Ubuntu.
I installed memory card now monitor colors has been adjused to light blue and white. Tried control panel in personification to chg color but I think the color is off due to ATI graphic card radeon xpress 200.
at first with a single boot system(ubuntu) everything were fine with everything include second monitor ,then i installed vista too,now i have a dual boot system & i am very happy to get rid of crappy junk microsoft's software as much as i can,unbuntu performance is really wonderful to me,just i have one problem,my second monitor show very weird colors ,almost like a negative print,then i boot with vista & there everything are fine with my second monitor,then i guess i don't have any hardware or driver problem,any help or suggestion?I changed my visual setting from extra to non,in case if this problem is because of not enough memory or els,but iy didn't work. my loptop is a vaio vgn,4 gb ram,intel centrino 2- 2.66 ghz-ati radeon graphic card.
I installed FC11 on my laptop T43 and the video card is ATI Mobility Radeon x300. Now I have a problem of screen resolution with external monitor:
When I do presentation, I have to mirror the two monitors and both set to 1024*768, which is not perfect.
I remember that when I use RHEL 5 desktop edition, The system can automatically detect the external monitor and set it by itself ----- The laptop uses 1400*1050 and the external monitors such as projector uses 1024*768. But I haven't found such feature on FC11.
so when ppl bring me their computer and i install them ubuntu in my monitor when they take their computer to their home ubuntu does not keep the screen resolution i set for them.
I have a old Pentium III box with equally old monitor (It says LG Sutdioworks 45v).I have installed Ubuntu 10.04 LTS.I have found it difficult to setup my screen resolution. It shows by default 800x600.After some tweaking I can stretch upto 832x624.I have seen resolution up to 1024x768 in windows on the same box and same monitor.How can I improve the resolution?I have searched and found out that i need a xorg.conf setup as Ubuntu cant identify my monitor properly.I also installed ddcprobe, read-edid.However I have met with limited success.
I changed may graphic card, earlier I used NVIDIA FX5500 with nvidia driver, now I was trying to use ATI Radeon 7500, but there are problems with graphic configuration. At first attempt server started but after I changed a screen resolution the monitor went blank. I restarted a computer but after the X server started immediately the monitor wnet blank. I found that for completely for me unknown reasons Xorg was trying to use an NVIDIA glx module with radeon driver. I removed this nvidia driver, I expected ubuntu would be able automatically to set up a proper configuration, but instead of ubuntu complained about a missing driver. I also tried manually to set up some basic config using Xorg -configure but after that the Xorg server was stuck.
I am running Ubuntu 9.10 on a new HP PC (Pavilion p6240f PC).This came with an Intel GMX X4500 Integrated graphics.My monitor is Samsung SyncMaster 2333. Initially I got a very bad resolution, Later I edited /etc/X11/xorg.conf (created the file) and added the following.
I have a dell studio hybrid PC which I am hooking up to my TCL brand 40" LCD TV to use as a media center pc. The problem I am having is that I can't get the TV's native 1920x1080 resolution to display properly. The rendered desktop doesn't quite fit in the screen (I think its the top and bottom edges that are cut off) so for example the menu bar at the top is completely off the screen.
1680x1050 works fine in the sense that it fits the full desktop to the screen size, but its not the native res. In the resolution changer utility, it recognizes that my TV is a TCL brand but mentions 36 in the model name (the TV I have has 40 in the model name to denote 40") so I think Ubuntu is recognizing the wrong size TV. How can I finagle the screen settings to make the 1920x1080 fit properly on my monitor? Or get Ubuntu to correctly recognize my TV? My TV is a no-name brand so its hard to find info on it or others setting up linux with it.
OS: Fedora 12 Video card: ATI Radeon 9200 series Monitor: ViewSonic 19"
I installed Fedora 12 configured Gnome automatically. Generally default settings. My monitor was connected directly to the video card and all was good. My video card was detected and my monitor was detected as ViewSonic Corporation 19" and I can set the screen resolution to 1280x1024. I had no xorg.conf file, as it seems that Fedora 12 does a great job of PnP to just set everything up.Now I go and complicate things by hooking up my monitor through a KVM switch. All of a sudden my monitor is "Unknown" and the best resolution I can achieve is 800x600.
Sure, I could go and reconnect without the KVM, but I want to be able use it.Is it possible to edit xorg.conf to tell it "Trust me, just use 1280x1024 at 60Hz even though you can't figure out what the monitor is"?
I tried a number of the posted suggestions to generate xorg.conf files but none of them get me what I need. A simple sample file listing that does the minimum is greatly appreciated (I can experiment from there once I get a basic setup working).And can someone explain if it is X or the ATI driver that is getting confused by the unknown monitor type. It helps to know what is actually going on in addition to a fix (so I can figure it out myself in the future). Thanks!
I have upgraded to Lucid and I am using the Ambiance theme. Its all great apart from aptana's code suggest seems to be a bit odd. I have seen this thread but cannot reply to it. [URL]. Is there any update? Is this an ubuntu theme thing I need to edit or can I change one of the hundred aptana options?
After Migration to Ubuntu 10.10 to 11.04 which was the update of Firefox 4.0 to version 4.01. I got a problem in displaying colors. For example: it displays the blue as pink, brown as green.
on a 6-7 years old compaq laptop, connected to a brand new hp monitor i am having a mismatch with computer/monitor resolution.
before i had ubuntu 10.04 which could only run in x's safe graphics mode - allowing for full screen resolution but with handicapped graphics - for example videos fullscreen would be quirky and run with cpu at 100%, something which was no problem before 10.04.
then i tried ubuntu 10.10 and later lubuntu 10.10 (which had exactly the same problem); the monitor is running 1440x900 while the computer is rendering to only 1024x768 - leaving a huge black border on right and bottom of screen. the gfx is still crippled; videos fullscreen is quirky as before.
not matter is it Firefox or Opera.. I sometimes have problem after closing tab, in which I watched some flash video ( mostly ........ First specifinations : GPU : MSI Nvidia GeForce 9500GT 512MB, 128 bit ( installed restricted drivers, latest version, recomended..) Flash plugin is latest stable, Firefox and Opera too... System : Ubuntu 10.10 gnome ( installed just few days ago, but it happened before to..) Compiz enabled, latest stable...
So I open video in new tab... watch it ( sometimes whole, sometimes just part..) and sometimes, when I close that tab, I have problems with that part of screen, where that video was - system wide.. Some letter are not whole.. you can't read them... some colors are mixed, and wrong.. It looks like this :
I have to take picture with digital camera, since print screen points correct image, so that means that I have either monitor, or GPU problem.. (No problem on Windows 7, and I think no problem with Compiz beta, but alot of other bugs with compiz beta) This is how it should look:
When I opened those images on ubuntu, I wanted to crop them.. I noticed that some flash video, in background.. not the flash, but that last image frame only.. So how I move image viewer, that image stays in same place - that is the place where I have problem.. Here are images on that :...
I recently purchased a cheap computer to use for everyday tasks. It came pre-loaded with Windows 7. The monitor I am using is a Vizio VX20L. It's native resolution is 1366X768. I have no problem with the screen resolution in Windows 7 but in Ubuntu, I am having some issues. I have the propriatary Nvidia driver installed in Ubuntu but for some reason I cannot get the screen resolution right. I am currently using a resolution of 1360x768 and the right part of my desktop is not on the screen.
I have tried to adjust the screen size using the monitor settings, but I still cannot get the whole screen to show up. If I set the resolution to Auto in the NVIDIA X Server Settings, it defaults to 1280X1024 and I can see my whole desktop, but it is streeeeetched. Here is some relevant information pertaining to my system:
I'm using Ubuntu 10.04 Integrated Video chip is NVIDIA GeForce 6150SE The driver I'm using is NVIDIA accelerated graphic driver (version current)[Recommended] screen is a Vizio VX20LHD
I have Ubuntu (running Jolicloud) on my HP dv2000 laptop, connected to my Sony AV Receiver through HDMI to use the TV as an external monitor. However, the resolution seems to be slightly off as the outer edges of the screen are cut off. Is there a way to fix this by editing the xorg.conf file? My current setup is below. I tried adding the line "Virtual 1244 700" to the subsection "display", but when I restarted it threw me into low graphics mode. Is there anything else I can try?
I also tried setting up the resolution at 1920x1080 on the TV and kept the default resolution on the monitor as 1280x800, and as you would expect displays the entire desktop in a smaller version on part of the tv. However, the desktop is still offset, leaving the top and left margins cut off. So, perhaps I need a way to offset the screen? Is this possible in xorg.conf?
I was installing some packages yesterday, I think one of them was an update for grub. (I'm using grub 2). When I rebooted, the console text was in green, not the usual white. (using gfxpayload=800x600 i.e. console is in graphics mode). I first thought maybe it was some kind of St. Patrick's day joke, but now I am getting tired of it. How do I set the color scheme back to normal?
