Fedora :: Brasero Exit With Error At The End Of The Recording CD-RW?
Feb 10, 2010
I recording CD-RW with Brasero and at the end I get the error. The iso-image was write to disk, but lead-in and lead-out seems to be didn't write. What is the problem? This the log of the brasero:
Quote:
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1848)
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_set_output_size_for_current_track
BraseroBurnURI stopping
BraseroBurnURI called brasero_job_get_action
[Code]...
View 3 Replies
ADVERTISEMENT
Jul 7, 2009
I download the live 64 and burned it to a disk after it burns to the disk Brasero checks and says "error some files could be corrupted." I burn it slowest burn same thing happen. I downloaded thinking I had a corrupted download. Same thing happen. I never had a problem burning iso until now. What am I doing wrong?
View 6 Replies
View Related
Sep 12, 2010
I am using a fully updated fedora 13 64-bit system and when i run make on xoscope i get the following error:
collect2: ld returned 1 exit status
I have already installed all of the prereqs. And the configure went without errors.
View 9 Replies
View Related
Apr 27, 2010
I've got a fresh install of RHEL5 with updates installed running on a PC104. If the machine starts up the screensaver, I can't ever get out of it. The mouse pointer comes back up on the screen, but the desktop doesn't appear or a box to enter a password. I try to reboot X and get an error that X can't be started and it drops me to a prompt. I reboot from the command line and then I get the filesystem error and have to wait 2 hours while it scans.
View 4 Replies
View Related
Apr 21, 2011
I can't get any updates for my system and keep getting the errors shown below, and suggestions peeps?
E: linux-image-2.6.28-11-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-13-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-14-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-15-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-19-generic: subprocess installed post-removal script returned error exit status 1
View 9 Replies
View Related
Mar 14, 2011
I dont know how to put this that somobody would understand my problem but here we go. I have problem like said in title.I am unable to upgrade my kernel. Sunaptics says that I have 2.6.35-28 installed. I tried to reinstall 2.6.35-28 via synaptics but it gives me error.
Thats what uname -a says:
pekka@pekka-laptop:~$ uname -a
Linux pekka-laptop 2.6.35-25-generic #44-Ubuntu SMP Fri Jan 21 17:40:48 UTC 2011 i686 GNU/Linux
Tried to install 2.6.35-27 via terminal thats what I get:
Code:
pekka@pekka-laptop:~$ sudo apt-get install linux-image-2.6.35-27
[sudo] password for pekka:
Reading package lists... Done
Building dependency tree
code....
dpkg: error processing linux-image-2.6.35-25-generic (--remove):
subprocess installed post-removal script returned error exit status 1
Errors were encountered while processing:
linux-image-2.6.35-25-generic
E: Sub-process /usr/bin/dpkg returned an error code (1)
pekka@pekka-laptop:
View 9 Replies
View Related
Jan 10, 2010
I see there are a lot of other threads on this subject, but I don't find any solution in the other threads. I have been trying to burn cd's directly in Ubuntu, using Brasero, which was already installed. Why does it not work? It says that an "unknown error occurred" or something like that. I don't remember the exact error message right now. I am now burning cd's in "Gnomebaker" which I found in the applications list. This works fine, but only at the speed of 4x, no faster. I hope to get the brasero application to work, as this is the easiest, fastest way, just dragging files to the cd.
View 2 Replies
View Related
May 17, 2010
So I popped in a blank CD, opened up brasero, told it to create a new video project, added my files.... It told me to install vcdimager, so I did that and restarted brasero. I then told it to burn the video files to the disk as an (S)VCD. It began converting the files before the burn. After the conversion was complete, it gave the message "ejecting medium" and then it ejected the disk. After that, it said it encountered and error and wouldn't do anything from there. I tried a different CD, I tried just closing the disk drive. It just gives me the same error.
View 2 Replies
View Related
Dec 17, 2010
Does anyone experience burning problem with Brasero? At first, everything was great, but lately I receive all kind of messages (mounting problem, ejecting problem etc.) and burning is unsuccessful.
View 3 Replies
View Related
Apr 18, 2011
I was trying to burn a dvd to an image file today, and the first one worked no problem, I tried to burn another and I keep getting this error: Data could not be written (Input/output error) Here's my log:
[Code]....
View 5 Replies
View Related
May 5, 2010
I'm trying to burn mp3's into uncompressed .wav formats on a CD to play on a radio CD player that doesnt accept .mp3 cd's. When I try to add my .mp3 files, I get the error that the file isnt supported by any of the gstreamer codecs installed, with also the following message:
"Make sure the appropriate codec is installed." I have the gst-fluendo-mp3 package installed, I uninstalled and reinstalled brasero,
View 11 Replies
View Related
Apr 11, 2010
I noticed that if I have "exit" in a bash script file., e.g. script.sh,that when the word "exit" is reached, and the script file being executed is not in the PATH nvironment, i.e. ". script.sh", the whole konsole shell profile is exited! What gives here? Is there another command compatible to "exit" to prevent this, or will I just have the leave the "." part in the PATH enviroment, which is, to my understanding, is not recommended? I desire for a "goto" function in bash script files
View 11 Replies
View Related
Jul 24, 2010
I'm having trouble burning a data disk. When I burn it ejects the DVD, then saves a log. Here's the last few lines of its contents:
BraseroGenisoimage stderr: /usr/bin/genisoimage: Warning: Directory loop (/home/robert/Desktop/Mount_Directory/var/at/spool dev: 700 ino: 13323).
BraseroGenisoimage stderr: /usr/bin/genisoimage: Warning: Directory loop (/home/robert/Desktop/Mount_Directory/var/spool/postfix dev: 700 ino: 13200).
BraseroGenisoimage stderr: /usr/bin/genisoimage: Warning: Directory loop (/home/robert/Desktop/Mount_Directory/var/spool/postfix/pid dev: 700 ino: 13210).
BraseroGenisoimage stderr: /usr/bin/genisoimage: Warning: Directory loop (/home/robert/Desktop/Mount_Directory/var/spool/samba dev: 700 ino: 13247).
BraseroGenisoimage stderr: /usr/bin/genisoimage: No such file or directory. Non-existent or inaccessible: /home/robert/Desktop/Mount_Directory/Read Before You Install.app/Contents/Resources/ko.lproj/설치 전에 읽어보기.pdf
BraseroGenisoimage stderr: /usr/bin/genisoimage: Warning: Directory loop (/home/robert/Desktop/Mount_Directory/var/cron/tabs dev: 700 ino: 12670).
BraseroGenisoimage stderr: /usr/bin/genisoimage: Error: '/home/robert/Desktop/Mount_Directory/private/var/log/wtmp' and '/home/robert/Desktop/Mount_Directory/var/log/wtmp' have the same Rock Ridge name 'wtmp'.
BraseroGenisoimage stderr: Unable to sort directory var/log
BraseroGenisoimage called brasero_job_error
BraseroGenisoimage finished with an error
BraseroGenisoimage asked to stop because of an error
error= 16
message= "An image could not be created"
BraseroGenisoimage stopping
BraseroGenisoimage got killed
Session error : An image could not be created (brasero_burn_record brasero-burn.c:2839)
Quite a bit of stuff. You can download its full contents. I have no idea what this means and I really would like to make this disk.
View 2 Replies
View Related
Aug 20, 2010
This happens every time I try to burn an audio CD burning data CD seems to work fine.I open Brasero, click Audio project, drag a couple of FLAC files into it and try to burn, or in this particular case, create an image.A dialogue pops up where I am supposed to tell it where to put the image. I click Desktop but I don't change the file name (something like brasero.cue or whatever).Then it starts doing things but after a short while I get an error message and I am asked to save the log file, which I did and here it is:
Code:
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1741)
BraseroNormalize called brasero_job_get_action
[code]....
View 9 Replies
View Related
Mar 25, 2011
I've been burning a few linux ISOs lately to play around on a desktop I have (archlinux, Fedora, etc) and a few days ago Brasero stopped launching. I tried to uninstall/reinstall Brasero, but it still didn't work. There we no error messages, it would just try to start up, and quit.
I got frustrated and tried to run Brasero from the command line and got this:
Code:
user@computer:~$ brasero
Bus Error
user@computer:~$
View 4 Replies
View Related
Jul 17, 2011
I'm trying to burn an audio CD with Brasero. Every time I try this, it fails, but it works when writing to an image file. Brasero quits with the following messages in log:
Code:
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1744)
Unsupported type of task operation
Session error : An internal error occurred (brasero_burn_record brasero-burn.c:2862)
Do you know what could be causing this?
View 5 Replies
View Related
May 22, 2010
In linux, creating thread is same as process (clone()), except the virtual address space gets shared with the parent.If a running main process(thread) creates new thread, and if main thread exits, why should the new thread too exit? both are different entities, The same doesn't happen if the child thread exits, the parent thread would be alive.
View 1 Replies
View Related
Jan 4, 2010
well i tried burning puppy linux through brasero k3b and gnomebaker and this is what i got with brasero as a unknown error
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1799)
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_action
[code]....
View 3 Replies
View Related
Feb 5, 2010
I have made numerous audio CD's with Brasero, but recently I had to make one and mid way through the burning process I am given this error: Could not decode stream. Or some variation like that. It ruins the cd and after I get the error I can not eject the disc.
View 1 Replies
View Related
Jul 9, 2010
Working on backing up my DVD library. Anyone know why Brasero would fail to copy data due to an input/output error? Movie was Toy Story 2, disc 1.
View 6 Replies
View Related
Apr 23, 2010
I was installing SMPLAYER when the power failed...now i get this error message when trying to re-install the packages..
E: liblzo2-2: subprocess installed post-installation script returned error exit status 2
E: mplayer-nogui: dependency problems - leaving unconfigured
E: mplayer: dependency problems - leaving unconfigured
[code]....
View 3 Replies
View Related
Jul 21, 2010
I recently switched distributions, I let a guy talk me into switching from Ubuntu 8.04 to Mint 9. Since the switch, I have had a lot of issues that I have mainly worked out myself. I have posted all of it on the Mint forum, but there hasn't been much help available there. I have been told that Mint 9 is based on the newest release of Ubuntu (Lucid Lynx), so I thought I would post over here to see if anyone could help me. The only thing that's still giving me fits are the 3 software programs above. Using k9copy and trying to burn directly to disc, I am getting the error that I took the screenshot of. I then burned it as an iso image and saved it, then tried to use k3b and brasero to burn it that way and got errors with both of those programs.
From k3b:
Devices:
LITE-ON DVDRW LH-20A1S 9L08 (/dev/sr1, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW,
[code]....
View 7 Replies
View Related
Sep 18, 2010
I back up with rsync like this:
rsync -av --delete /mnt/hda1/ /mnt/hdb1/
hda1 had an error (bad superblock, i think), but rsync didn't exit! It just went on on deleting my files until i hit Ctrl+C. Now I can't access the original drive and the back-up drive has lost a lot of files. Why doesn't rsync exit when it encounters and error? How can I stop this behavior?
View 2 Replies
View Related
May 4, 2010
I'm running Ubuntu 9.10 Karmic and XBMC Live.I get error messages which seem to relate to openvpn.So I tried to remove it with the remove command. This is what I getQuote:
@XBMCLive:/home$ sudo apt-get remove openvpn
Reading package lists... Done
Building dependency tree
[code]....
View 1 Replies
View Related
Jun 28, 2010
"E: backuppc: subprocess installed post-installation script returned error exit status 1"whenever I upgrade my system I get the above message Anyone know how to fix it? or if it's anything important ?
View 1 Replies
View Related
Jul 10, 2011
using 'ntfs-config' to make ntfs partitions mount on bootup so that I can access my data partition from Ubuntu. The first time I installed ntfs-config it would not run. I uninstalled and reinstalled it and then it ran, but it didn't seem to be responding very well. I attempted to tick the partition I wanted and set it to be writeable. After I closed the app ALL my ntfs partitions were mounted, even the windows and system reserved partitions, and when I attempted to unmount them I got the following error:
Unable to unmount Data
Error unmounting: unmount exited with exit code 1:
helper failed with
unmount /dev/mapper/isw_dfjjdefcdi_RAID5p4 is not mounted (according to mtab)
I tried rebooting. I tried uninstalling ntfs-config, then reinstalling it (now it wont run again). So I'm at a loss as to what to do. I simply want my data partition mounted on boot up and writable, not the others.
View 4 Replies
View Related
Dec 6, 2010
in middle of my script when i use tar command to tar some 1000 images each of size 5MB,and
all the images are passed as argument
example tar -cvf <file.tar> <all images as argument>
but when i extracted the <file.tar> it does not contains all the images and it displayed error message tar:Error exit delayed from previous errors
View 2 Replies
View Related
Dec 6, 2010
in middle of my script when i use tar command to tar some 1000 images each of size 5MB, and all the images are passed as argument example tar -cvf <file.tar> <all images as argument> but when i extracted the <file.tar> it does not contains all the images and it displayed error message tar:Error exit delayed from previous erros
View 1 Replies
View Related
Oct 23, 2010
I have been running a live version on a 8 gig stick. Played nice for a couple of months but now when I try to access the native ntfs file system, I get the following error message.... Error mounting: mount exited with exit code 21: mount: according to mtab, /dev/sda6 is already mounted on /media/c
View 1 Replies
View Related
Mar 26, 2011
My computer has been acting quite strange lately. It's been taking longer to boot, and my sound doesn't play anymore (Only a high pitched sound is heard, and no hardware for sound is detected). Just recently, my Windows 7 Partition returned the error of Disk Error Occured. Press CTRL+ALT+DEL to restart.
Any way I can fix my whole issue, I think my desktop is starting to die on me :O (And its only about 7 months old T_T)
View 4 Replies
View Related
