Fedora :: 15 Hang In Parallels On Mac?
May 30, 2011
I've been using F15 through the early releases and now with the final release, and in all of them I've had the same issue:
It will install fine in Parallels, however about 30 seconds to 1 minute after launch, it will hang and completely freeze. This will happen even in run level 3 with no gui running. It doesn't *appear* to happen at the same time every time.
I've tried, disabling networking, sound, and a few other things in the VM to see if that has an effect, but it doesn't seem to make a difference.
I've also tried making a copy of my F14 VM and upgrading. The same issue persists in this case as well.
I have had no issues with F15 on the metal on different machines, as a matter of fact it's been great and required very little hardware work-arounds. Similarly, F14 has run fine and continues to run fine on Parallels on this machine.
View 5 Replies
ADVERTISEMENT
Oct 27, 2010
I'm having trouble mounting my mac partition of my HD on the linux side while it's running on Parallels(a VM for mac). I've tried using the GUI and the terminal with no success... Honestly I have no clue what I'm doing. I've tried to follow other forums about it, but the stuff out there is out dated, I mean like 2006-2007... I'm running Snow Leopard osx 10.6.4. It shows "Failed to receive share list from server" when I click on the mac partition in the network GUI, to try and veiw the files. When I try to mount through terminal, it says "No such file or directory."
View 2 Replies
View Related
Jul 23, 2010
have very limited experience with command line interfaces in Mac OSX (the OS that I'm used to). Please pitch any replies at the appropriate level My problem:I've installed Mandriva Spring 2010 Free in a Parallels Desktop 5 VM running inside Mac OS X 10.6 (Snow Leopard).Parallels has a set of tools that I need to install to make the VM play nicely with my host OS. It is here that I'm running into problems. When trying to install Parallels Tools I get a warning that 'Some components needed for parallels tools installation are missing in your system;. I'm offered the chance to download them automatically. This download always fails and I'm told that I need to download 'kernel sources' manually and try again.
After some considerable research (remember I'm TOTALLY new to Linux) I found out what this means and have installed what I believe are the correct files using the 'install and remove software' window. As I understand it, I need to download the source files of the kernel I am using (exactly the same version), so I now have:kernel-desktop-latest - Version 2.6.33.5ernel-source-latest - Version 2.6.33.5These are 'virtual rpm's that make sure i always have the latest kernel versions, which as I understand it means that I should have the latest kernel and corresponding kernels sources... but I still get the damn error message telling me to install 'kernel sources' when I try to run the parallels tools installer.
View 3 Replies
View Related
Jul 21, 2011
After trying to upgrade to PHP53u on Centos 5.6 using the instruction here: [url], I've run into trouble.
I have 3 issues that I have identified so far:
1) After the upgrade I go this message:
2) This message when trying to access the site: Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
3) Cannot access my Parallels panel on port 8443.
View 1 Replies
View Related
Aug 4, 2009
I am running fedora 10 on my laptop. I use a usb Western digital "MyBook" 500Gb (ext3). I am using this hard drive since more than 1 year now. Lately I run into a single problem when I read a precise file. The laptop becomes totally unresponsive and I have to manually shutdown the computer. After start-up I can find that the /var/log/message file of my previous session has grown very quickly with "[sdb] Sense Key : No Sense [current]" and "[sdb] Add. Sense: No additional sense information" messages.
I found various similar question on the web, most of the answer were hardware dependent and kernel related. I tried various kernel hoping that my specific problem would be fixed in the next one but with no success (all the kernel since fedora 10 release and two testing one: 2.6.29.5-84.fc10 and 2.6.29.6-93.fc10), I don't have access to a Fedora 11 machine.
I replaced the usb cable and check that the power supply was working correctly.
I am joining part of /var/log/message and the results of lsusb (related to the external hard drive).
View 2 Replies
View Related
Feb 20, 2010
Just upgraded to FC12, but when running azureus, it hang the entire system.Anybody had the same problem. I tried both yum installed and download from azureus site.
View 2 Replies
View Related
Jun 26, 2010
I have a GRUB2 USB multiboot setup. Plus I have a multiboot setup on my computer with Ubuntu 9.10, PCLinuxOS, Windows XP, and Fedora 13. The issue I'm having is different but the same. On my USB multiboot, Fedora will hang up on certain devices. Things such as touchpad, bluetooth, etc. On my PC it hangs up on first the bluetooth, then I unplug, then the USB hub, then the mouse and finally the external hard drive. It detects the devices but it freezes on detection. I did get this error before the device detection began:
Quote:
dracut; dracut-005-3.fc13
dracut: FATAL: Don't know how to handle 'root=(0,4)'
dracut: Refusing to continue
dracut: FATAL: Don't know how to handle 'root=(0,4)'
dracut: Refusing to continue
this is on the PC and the problem with the USB is that it will hang up when detecting devices.
View 1 Replies
View Related
Mar 7, 2011
I have Fedora 13 installed on a new PC and have two types of intermittent boot hangups. What logs exist within Fedora 13 that may help me identify the cause or causes of these hangups? Todate, a reboot gets over the problems but I wish to get this sorted whilst the PC is still under warranty.
View 6 Replies
View Related
Feb 4, 2011
i am working on a client server real-time gui application written in C++ for Redhat. There is an issue with this application that it makes the system hang. i am not able to sort out the issue as it happens randomly. Sometimes with in half an hour it makes the system hang, sometimes it takes 4 or 5 hours when it receives realtime data. Is there any way to debug this issue. I tried valgrind..but it was not of much use..
View 4 Replies
View Related
Feb 16, 2010
Why my fedora 12 always hang and not responding?it is any problem with my installation process?when my fedora not responding,the only thing that i can do is restart it again.i did this again and again..
View 5 Replies
View Related
Mar 10, 2011
I had to replace the motherboard, processor, memory on a machine because the old motherboard died. It worked fine under the old board but the new board (Gigabyte 880GA-UD3H) is causing Fedora 11 (and the Fedora 14 Live CD) to fail when initializing an Adaptec AHA-3940UW SCSI adapter.
I was able to display the boot messages and found that the first channel on the adapter is fine, but the second channel causes the boot to hang. The messages are:
aic7xxx 0000:05:04.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
scsi6 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
<Adaptec 3940 Ultra SCSI adapter>
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/254 SCBs
aic7xxx 0000:05:05.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
View 1 Replies
View Related
Feb 10, 2010
How do I make a server wait on shutdown for a set amount of time?I tried making a service that just does Code: sleep 7m and made it first priority on shutdown but it seems to ignore itI'm pretty sure it runs... I'm currently testing that to make sure
View 4 Replies
View Related
Mar 29, 2010
Fedora hanging during boot when new drives are connected.
I'm running an FC12 install on a 750gig Samsung SATA drive. BIOS is set for drives to be AHCI
I've got 3 other identical 750's, two of which have never been used (as in never been written to). None of the drives have any jumpers set on them, as I've read that SATA handles that. At some point, all 4 drives were connected, and I had formatted one of the drives and backed some data up to it. But a reboot left me with FC hanging on load and the solution was to unplug all 3 other drives. I left it alone for a month.
Troubleshooting this weekend, I found with just my active drive and one of the untouched drives connected, FC still hangs. What I mean by hanging is that the blue background appears with the un-filled 'F' logo which filles diagnally under normal conditions. Mine will not begin to fill, and keyboard commands are not recognized.
It almost resembles a master/slave problem, but I thought that was gotten rid of with SATA. I tried setting the BIOS to use IDE-compatibility mode and set the order of the drives but the problem was the same, though I did not try any jumper arrangements.
View 5 Replies
View Related
May 29, 2010
on bootime the system hangs till pressed <alt><esc> a couple of times. The splash image is shown and the bright spot nearly full. The network and disk led's are off. System is hanging.After <alt><esc> ing a couple of times the leds blink,, the system comes up and the gnome login screen appears. The same behaviour ( exept of the gnome login screen )if starting with runlevel 3.Press 'I' to enter interactive startup.udev starten: %G[60G[[0;32m OK [0;39m] Is it possible that the udev error is responsible for the stattup - hang?
View 6 Replies
View Related
Jun 9, 2011
I have a fresh installation from the demo ISO image of F14 running on an Acer TravelMate 4200. The system is a Dual Boot with win Vista. Windows Vista runs without any problems but when using F14 a kernal crash constantly occurs and it then hard freezes or hangs and the machine needs to be cold booted. There is nothing in particular that I am doing either, the problem happens when the machine is idol or when I am working in various apps.
The F14 system is completely up to date running kernel version 2.6.35.13-91.fc14.i686. The following error below is from the automatic bug reporting tool and I have reported this using the tool:
Package: kernel
Latest Crash:Sat 04 Jun 2011 14:55:00
Command: not_applicable
Reason: BUG: unable to handle kernel NULL pointer dereference at 000000f8
Comment: None
Bug Reports:
View 2 Replies
View Related
Aug 28, 2011
I recently pulled out my radeon graphics card as I never knew where my display would show up. I have onboard graphics and had the card. I am using onboard now.
Looks like I have a driver crash here in the 2.6.40.3 kernel:
[ 1791.466962] ------------[ cut here ]------------
[ 1791.467505] kernel BUG at drivers/gpu/drm/i915/i915_gem.c:3292!
[ 1791.467505] invalid opcode: 0000 [#1] SMP
[Code]...
View 2 Replies
View Related
Dec 6, 2009
i am afraid that some one palying in my fedora 12 system , " hacked " first i got this message when i log to my broadband internet provider
Quote: You have asked Firefox to connect securely to ******, but we can't confirm that your connection is secure. Normally, when you try to connect securely, sites will present trusted identification to prove that you are going to the right place. However, this site's identity can't be verified What Should I Do?
If you usually connect to this site without problems, this error could mean that someone is trying to impersonate the site, and you shouldn't continue.
[Code]...
then when i log to yahoo mail , my system hang for a while then continue. how do i know that my system is secure ? what are the steps i should follow to secure my system ? i am still newbie and i dont have time to spend it in search in google or reading blogs
View 2 Replies
View Related
Feb 15, 2010
New install of Fedora 12 64-bit from DVD on an Optiplex 740 (AMD) with 8GB memory I had to use the mem= option to get the install past the EDD probe, but it seemed to install successfully. Now on boot it goes all the way through the "filling icon" progress meter, then switches to a completely black screen with an X pointer cursor that responds to mouse movement, but nothing else happens. Ctrl-Alt-F{2-5} do not switch to a console login, so the system's inaccessible.
View 10 Replies
View Related
Aug 7, 2010
After updating to kernel-2.6.33.6-147.fc13.x86_64 (and updating all kmods) VirtualBox guests no longer boot.
I had a Windows guest (from now on refereed as Crapdows) that worked normally. After the update, I could get to the "Start Windows Normally" screen, but then Crapdows refused to boot. At first, I thought it was a crappy M$ bug, but after creating another VM (Doublecrap), and starting from scratch, I was able to get to the "Windows is loading files" screen, and then the guest hangs again.
This problem is generalized to all OS'es I've tried. In Ubuntu, I can get to the language selection screen before the installation freezes. The same applies for Fedora and SUSE guests.
Is it time to get my hammer?
View 4 Replies
View Related
Oct 25, 2010
I'm running Fedora 12 and at some point about a year ago my ALSA just stopped working. After posts, trials, etc, no joy. Now, after a few more months, and further F12 updates, I'm trying to get back to it.I have:
Code:
[root@DadPC ~]# cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.21.
[code]....
View 2 Replies
View Related
Nov 18, 2010
I used to have FC11 installed with the nvidia supplied binary driver. Worked fine, very stable. Trying FC12 and FC13 live CDs caused a hang, so I stuck with FC11. FC14 live CD did boot so I backed up my own files and did a clean FC14 install. Upgraded to get kernel 2.6.35.6-48, installed the nvidia driver from RPMFusion (260.19.21) and had a working system! Now, after a cold boot, the kernel always hangs during boot. Tried a number of kernel boot option (apci=off, noapic and a few others too). The hang is not always at the same place. The earliest it has hung is after:Disabling lock debugging due to kernel taint
Sometimes its a few lines later at:NVRM: loading NVIDIA UNIX x86_64 Kernel Module 260.19.12 ...(which would seem to imply that the hang can even occur a step or two before the actual driver is loaded!)
Sometimes it keeps going for a few more seconds and randomly hangs during some other driver load.
Without a specific nvidia driver the system always boots ok, so I'm pretty sure its the nvidia driver but I just can't seem to get a handle on this in a reproducible way. Sometimes, when I have make some other change, it will boot and work ok, but a reboot locks it up again (for example, in case it was SELinux, I disabled it and on the next reboot it booted and worked ok. Then, next boot, it wasn't working again). When I make changes, I reboot using the previous kernel, make the changes and reboot, with an occasional success. Once I start rebooting using the latest kernel, it always hangs.
I'd love to get a solution to this, but even some advice on debugging this would be appreciated!
I'm using 8600GT, 256Mb, PCIe card in a MA69VM motherboard with 3Gb of RAM.
View 2 Replies
View Related
Dec 26, 2010
I tried this kernel released on Dec 21th. It makes my F14 constantly suddenly freeze in GUI with no keyboard/mouse response anymore before restart. Only thing to do in this situation is press power-off button and after restart I found no hint in logs.My laptop is thinkpad t400 and I think it's a very common installation.Now I revert to older kernel 2.6.35.9-64.fc14.i686 and it's works quite well.
View 14 Replies
View Related
Mar 18, 2011
Now, all of a sudden, after I restarted after a system update, My dell desktop inspiron hangs on boot. The kernel is: 2.6.34.8-68.fc13.i686. Not only that, but the system won't boot for any of the remaining previous kernels.
View 6 Replies
View Related
May 27, 2011
i have just upgraded from f14 to f15 using preupgrade. i am now still waiting for the first boot to finish. the screen is stuck for more than an hour and the last line written was:
Started LSB: Start up the OpenSSH server daemon. and there is a blinking cursor.
View 3 Replies
View Related
Jun 17, 2009
I installed F11 x86 from the DVD onto one of my machines using a total of 4 partitions:
1. /boot
2. /
3. /home
4. swap
I then created an image of the first 3 partitions with fsarchiver and restored it onto a second machine (with different hardware). Grub was loaded onto the second machine as well without a problem. The new cloned install will get past grub fine but the kernel hangs. After removing 'rhgb quiet' from the boot options, I can see that the last message outputted to the console is something about the PS/2 mouse - this doesn't make sense as the mouse is working perfectly fine.
Additionally, I can still reboot using ctrl-alt-delete so the kernel/CPU must still be responsive. I have tried troubleshooting the various pieces of hardware, so I'm guessing it's something with the clone. All the cloned filesystems appear to be fully intact; the partition UUID's are all the same. I've even tried changing the UUID's both in grub and /etc/fstab to hardcoded /dev/sdaX , but this does not fix anything.
View 2 Replies
View Related
Dec 3, 2009
I have a small intel Atom based computer that acts as a 'combo' firewall / router / server / 802.11 Access Point that services my end user needs. I'm using hostapd 0.7.0 and Fedora 12 x86_64. The system works fine on Fedora 11. I decided to upgrade to Fedora 12 last night, and completely broke my wireless. Note that configurations are _identical_ between the Fedora 11 and Fedora 12 installation. Though, I did recompile the hostapd binary under Fedora 12 libs, etc.
Anyway, Client #1 associates fine. Client #2 associates, and hostapd hangs. Strace'ing the process shows nothing... just.. dead. SIGTERM works, but hostapd is unable to 'unallocate' the wlan0 interface, which appears to be in a hung state, so I can't simply re-start hostapd. So, I have to remove wlan0 from my bridge, them rmmod ath9k, modprobe ath9k, re-add wlan0 into the bridge, restart hostapd.. But the second association consistently hangs it every time. Next, I went and downloaded the latest compat-wireless drivers as of this posting. Selected the ath9k driver, built the modules, replaced them in my /lib/modules tree, depmod'd, reboot, etc..
BIG difference. Now hostapd does not hang, and there appears to be better logging/debug than ever before. This made me happy. Unfortunately, there appears to be a new problem. Clients can now associate, but only for a split second. They are immediately disconnected, and the following message appears via hostapd's stdout logging: hostapd: wlan0: STA 00:21:5c:39:a3:99 IEEE 802.11: did not acknowledge authentication response
For every client that attempts connection. Note that I'm using WPA2-EAP-PEAP w/ MSCHAPv2. I've also, for kicks, just tried regular WPA2-PSK with similar results. I'm using a mixture of clients, Windows XP, Windows 7, Linux Ubuntu, Fedora, and others.
[Code].....
View 1 Replies
View Related
Jun 13, 2009
[code]...
when trying to choose the Linux partition, I found that it would just hang at a blank screen. Looking further into the problem, I had booted with the Linux Rescue and checked the /boot/grub/grub.conf file. It appeared to be that the menu was set to hidden. I got rid of that line, and checked the boot arguments. It still had acpi=off set with the kernel and everything else seems to be in order. Root is set to root (hd0,2) which should be correct.
View 6 Replies
View Related
Jan 4, 2011
I've been using Claws for a long time and I like its filtering capability, however this app is hanging,hogging 100% of the cpu time. the last version was similar, but the latest version hangs after an hour.I've run it in debug mode, and with strace but nothing stands out I'm suspecting that its the way it looks for a pipe used by pulseaudio, which is not installed. It doesn't hang immediately after trying to open the pipe but within a few minutes. I'm not getting any success from the claws group, so time to look for another mail applicationI'm open to suggestions, I've tried Tbird and found the filtering lacking.there is a catch, I need to be able to import the mail from Claws-mail into it.
View 10 Replies
View Related
May 11, 2011
I just updated to kernel 2.6.35.13-91.fc14.x86_64, and I'm now having a weird issue where my computer will hang during startup and shutdown unless I move the mouse around.
While moving the mouse, it will boot up or shut down normally. Once i stop moving the mouse around it will hang (until I begin to move the mouse again).Once fully booted it acts fine..
View 13 Replies
View Related
Jul 12, 2011
I've seen a lot of posts related to problems with GNOME 3 shell and nvidia drivers but I have yet to find anything that seems to fix my problem. At this point, the laptop, a Dell D850, boots just fine all the way to the gdm login screen. When I log in, the background and menus initialize and the mouse can be moved around, but nothing works---I can't click on anything, Alt-F1 does nothing, and I have to switch to a VT and shut-down X. I've uninstalled all things nvidia and now I have a working laptop, so long as I use Classic with Compiz.
I upgraded two other hosts, but both had ATI graphics cards; they worked without a hitch. I'm regretting having decided to upgrade this laptop
View 2 Replies
View Related
