How do I make a server wait on shutdown for a set amount of time?I tried making a service that just does Code: sleep 7m and made it first priority on shutdown but it seems to ignore itI'm pretty sure it runs... I'm currently testing that to make sure
View 4 Replieswhen my pc boots and shuts down my monitor goes into 'input out of range' mode for a bit between the gui and the text only phases of boot/shutdown.is there a way to fix this? or where to start troubleshooting?also, when it shuts down it hangs after coming back to the text only part
View 4 Replies View RelatedI just updated to kernel 2.6.35.13-91.fc14.x86_64, and I'm now having a weird issue where my computer will hang during startup and shutdown unless I move the mouse around.
While moving the mouse, it will boot up or shut down normally. Once i stop moving the mouse around it will hang (until I begin to move the mouse again).Once fully booted it acts fine..
I am new to opensuse, coming over from debian based systems. However I am having an issue in which my system will not power off on shutdown. Restarts just fine. i get a missing error during shutdown, but there is nothing to relate the error to on that line. Then the shutdown procedes to The System will be halted immediately then hangs. The keyboard powers off and then thats it. All fans are still running. I have searched extensively on this forum and google.
View 9 Replies View RelatedI'm running V5.3 (newly installed) on an FJ E8020 laptop. The problem I have is when shutting down (*not* rebooting). NetworkManager fails to stop and after (during?) the postfix shutdown, the system seems to hang.I cannot access via another screen or remotely. I can't find any clues in the log files.
[Code]...
Every shutdown/reboot always hangs on
Code: Select allkvm: exiting hardware virtualization
I have tried rebooting/shutting down with
Code: Select allshutdown -h now
reboot
shutdown -r now
halt
init 0
init 6
And all hang on the same line. This is 100% reproducible. I am not actually running a virtual machine. I don't have qemu-kvm installed. I do have separate partitions on my system. I have a /boot, /, swap, and /home partition.
From looking at other posts: [URL] .....
Solutions tend to be across the board: not unmounting properly, acpi settings in grub, using a different shutdown command.
My fstab file is:
Code: Select all# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
[Code] ....
and the result of Code: Select allmount is
Code: Select allsysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,relatime,size=10240k,nr_inodes=498135,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,relatime,size=800408k,mode=755)
[Code] ....
I have been looking for a lightweight bandwidth monitoring app and came across bmon. It does what I need. However it has an interesting way of exiting.
when it is running and you close it down it ask you 'Really quit (y/n)' and does not shut down. I am used to just right clicking on my desktop and selecting 'leave' when it comes to shutdown time.
A few times now the laptop hangs on shutdown if bmon is open. I guess it is due to the app asking if it should shutdown. Is there a way to disable the app asking or alternatively nuke it for sure with some script on shutdown.
I could search the relevant konsole running the app and go thru the steps to shut it down but sometimes I am in a hurry and it doesn't feel like the way to go anyhow?
I'm trying to reboot the server (shutdown -r now).But it seems like nothing happened.
When I try "shutdown -c", the system prompts "shutdown: cannot find pid of running shutdown."
I have installed a cluster computer with 10 nodes . The manufacturer is HP . All nodes and the master node have redhat enterprise linux installed in them . When I shutdown the nodes from the master terminal using "shutdown -h now" they get shutdown . But they dont get completely turned off . This issue bothers me when the power supply is given , all nodes boot up simultaneously generating a huge heat .
Thing to note : When we shutdown our PC they get completely turned off . When the power supply is given , a press on the Power On button is required to boot the system. But , why does it not happpen in the case of cluster? Is there any other way of completely turning off the nodes from the master terminal ?
After a couple of days, some commands related to the disk (df) or files (ls) or killing process (kill -9) doesn't respond. Even I can't reboot or shutdown my server. After an hard reboot, some files are not here anymore or the log files are not filled anymore until I restart.My disk are behind the RAID controller i6 and are configure in RAID 1. The disks are two HP SCSI 72,8GB 10k RPM.Maybe I am totally wrong to check the disk access side, so I am open to other explanation.I can also add that my CPU is running under 1% et my RAM under 10%.
View 14 Replies View RelatedRecently I installed vncserver (tigervnc) on my desktop. Ever since my computer refuses to shutdown normally. At shutdown the following message pops up: Quote: System policy prevents stopping the system when other users are logged in Then I have to enter the root password to shutdown. If I stop vncserver before, the computer shuts down normally.
[Code]....
I need to know how to configure automate sending sms if server reboot and shutdown? Now i just set sms notification once my server it's UP by create scripts in /etc/rc.d/rc.local while booting then from server sending sms notification. SMS - using gnokii attached mobibe phone. Server - Fedora 10
View 3 Replies View RelatedMy server OS CentOS release 5.4 (Final). Using Plesk panel 9.2..Server getting down frequently, how to check the log on server. how to find out the reason.
View 9 Replies View RelatedI was wondering if there was a way to create a script that would kill a process (the Folding @ Home one in particular), then shut down my pc. And I was wondering if there was a way to create another script that would set it to a timer, kind of like the shutdown -h command
View 5 Replies View RelatedI have Cent OS 5.1
I also have http://phpsysinfo.sourceforge.net/
I have asterisk running .
Now when I look at System Information ,
I see that "Physical Memory" keep increasing and at one point it reaches 96%. Then my sever get hang and then I have to restart it.
I have 4 GB RAM.
Processors 2
Model Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz
CPU Speed 2.53 GHz
Cache Size 3.00 MB
System Bogomips 10135.71
Kernel Version 2.6.18-53.el5 (SMP)
Distro Name CentOS release 5 (Final)
Load Averages 0.27 0.35 0.31
What could be the reason ?
We may edit some values for GRUB from /etc/default/grub to modify the way that computers boot up and shutdown.My question is how to make such modifications for boot and shutdown. For example, suppose I want to display two splashes one during booting and the other during shutdown or I would like to acpi=off during booting and then acpi=force during shutdown.
View 1 Replies View RelatedTrying to install Ubuntu 10.10 Server via a usb flash drive. Can't use a cd-rom as the server doesn't have a cd-drive! lol! It boots up and then hangs at the loading stage where the ubuntu symbol is displayed.
View 1 Replies View RelatedWe are using squid proxy server in Linux and server is getting hang often, during this time when see the log file it will show like below
Jul 23 11:52:26 Linux-GW avahi-daemon[2028]: Invalid response packet from host 192.168.1.154.
Jul 23 11:54:55 Linux-GW avahi-daemon[2028]: Invalid response packet from host
[code]...
Iam handling mail server in redhat.MTA using is qmail.since last 1 month it get overload and get hang...since in morning its time for user to loging into mail through web interface.though suddenly login in to mail it get overload and server got hang.we need to restart the server...did not get time to kill https also some time MP port work to save us...still didnot get command to overcome the over load in server...
View 9 Replies View RelatedI am trying to install RHEL5.5 server on Dell Optiplex 360. When its reached at "checking dependencies in packages selected for Installation" its hang. What should I do, I checked cables hardware etc... every thing looks ok.
View 7 Replies View RelatedI was trying to make shutdown without root user using visudoI tried the following still it did not work for mehawk ALL=NOPASSWD:/sbin/shutdown -h now
View 6 Replies View RelatedI am on opensuse 11.2 and sometimes when I shutdown the computer, It make a noise like "bzzz" but different than error beep. I think maybe there is a problem withe the automatic detection at the boot, but I really don't know alsa configuration or udev rules very well.
Code:
$ cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfc400000 irq 22
1 [HDMI ]: HDA-Intel - HDA ATI HDMI
HDA ATI HDMI at 0xcfeec000 irq 17
Code:
$ lspci | grep -i audio
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
01:00.1 Audio device: ATI Technologies Inc RV710/730
Now, this is the case:
Yesterday, i tried to boot up my laptop but the battery was uncharged and it was unable to boot ubuntu karmic 64 bit. so i tried to plug the charger as soon as possible but when i looked at the screen, there was a huge black blank screen. so i had to restart it manually by pressing the power button. Now, i can see the grub screen, i can choose one of three kernels and the Windows. But only Windows can boot but the others doesn't. And also, grub timer does not work not. It does not count down to zero and autoboot the default os. I tried to reinstall grub but everytime , i got problems. Here is what i tried to do. In another try here, i failed again. In chroot, i could not "apt-get install" as it said i wasn't connected to internet (but i was), and in another try, it could not find p/rmonct /mnt/etc/resolv.conf.
I have a third party application with a database.
I have created the service but it does not wait for the database to shutdown before the systems continues with the shutdown.
This results in the database being seen as crashed.
here is my stuff i did.
CACHE START AND STOP SCRIPT FOR REDHAT
#vi /home/cacheusr/cache_ctrl
Insert below
#!/bin/sh
#
# /etc/rc.d/init.d/cache_ctrl
# Cashier Control Script
#
# chkconfig: 2345 55 01
code....
I have a newly built Redhat 5.5 box. When connecting over VPN and executing either "ls -al" or "df -h", the command prompt hangs without returning any output. Have got same result with TeraTerm and Putty clients. However, other commands run fine. Also,local users are able to run "ls -al" or "df -h" successfully.Storage is local disk. Any idea what could be mis-configured.
View 1 Replies View Relatedfrist i want to thank all who worked on this website i was install squid and other service in my office network server and install the same services with same configration on biger network about 150 machines every thing well on office network but the other network have problem squid hang and stoped serve any request and squidclient command return "alarm clock " message after many time but the service still run at port 3128 and status is started when i run /etc/init.d/squid reload its run again sometime and hang again squid log file have not any problem on it i install my server on gentoo with flags
Code:
net-proxy/squid-3.0.19 USE="zero-penalty-hit -caps -epoll* -icap-client (-ipf-transparent) -kerberos -kqueue -ldap -logrotate* -mysql -nis -pam (-pf-transparent) -postgres -radius -samba -sasl (-selinux) -snmp -sqlite -ssl"
my squid.conf
[code]....
When i checked my server in today morning,i found server was hang.
How can i find whether it is hang or not?
Where can i find the log from which i can find the exact time?
But when i try the Ubuntu Server Edition, using the same method of burning the iso file i downloaded from ubuntu homepage into a cd, and when i reboot my pc and the screen display the following:ISOLINUX 3.63 Debian 2008-07-15 Copyright (c) 1944-2008 H. Peter Anvin
Loading...Initializing gfx codeand it hang there.Do anyone know what happened? I have verified the file i download and the disc i burnt through MD5SUM.
My Laptop spec:
Intel(R) Pentium(R) M Processor1.86GHZ
1GB Ram, 80Gb Hardisk
OS1: Microsoft XP Home edition SP2
OS2: Ubuntu Desktop Edition
I've recently upgraded to 11.04.Till now, I could select an option to make the open folders on shutdown, to restore on startup.There was an option to restore running applications
View 5 Replies View RelatedSchool with linux running on students' laptops, connecting via wlan to a Debian NFS and LDAP server. Every student logs on his/her profile residing on the NFS server.The clients are set up with autofs. Earlier, I had set up the wireless network in /etc/network/interfaces, but this time I decided to configure network manager so as to bring up both wireless and wired network before logon. This setup has been working on for the last fire or five years with only minor changes. Also worked with Karmic Koala, but still with the interfaces file instead of networkmanager. The Vostro is also new here, we've previously used mostly Dell Latitude D505s.
So here is what works:
1: Clients can log on to LDAP and NFS servers both wired and wirelessly. Everything is smooth.
2: While on LAN, shutdown and restart works flawlessly (and quick as a breeze, I'm really impressed by startup/restart/shutdown times, under 25 secs!).
3: Shutdown and restart also works wirelessly when doing it either from a local account or from the GDM chooser.
What doesn't work, however, is shutting down or restarting directly from a networked account connected while only being connected over the wireless network. This is what's being displayed on the terminal after it has tried tho shut down for a while:
Code:
The system is going down for halt NOW!
acpid: exiting
init: cron main process (1011) killed by TERM signal.
init: tty1 main process (1365) killed by TERM signal.
[code]...
If I try ctrl-alt-del at this stage, it says:
"init: rc main process (3030) killed by TERM signal"
"Checking for running unattended-upgrades: "
And then it will hang again, until I hold the powerbutton for some seconds. The unattended-upgrades part is what seems to be the culprit. I suspect it is about the wireless network not being connected any longer or something like that, but I'm not sure about how to go about debugging shutdown scripts here. I'd be grateful for pointers. I will try and see how it goes with the old interfaces file setup, but I'd rather make nm work.