I recently pulled out my radeon graphics card as I never knew where my display would show up. I have onboard graphics and had the card. I am using onboard now.
Looks like I have a driver crash here in the 2.6.40.3 kernel:
[ 1791.466962] ------------[ cut here ]------------
[ 1791.467505] kernel BUG at drivers/gpu/drm/i915/i915_gem.c:3292!
[ 1791.467505] invalid opcode: 0000 [#1] SMP
[Code]...
My graphics card (00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03))
used to work fine, but yesterday I opened glest and it crashed my computer within 5 seconds. No picture was ever displayed. I downloaded another 3D game called Nogravity (Glest being my only one, I wanted something else to test) and it crashed after a few minutes of play and I had to restart. After all the crashes kerneloops came up with a report.
Here is the most recent one:
Code:
I did recently notice that I have no direct 3D rendering, it comes up with something like: No (LIBGL_ALWAYS_INDIRECT SET)
I do not know whether I used to have it, but I do know that 3D apps used to run perfectly well. (In fact the stability of 3D apps was what converted me from Ubuntu where they crashed every 5 minutes)
I ran glxgears for 5 seconds and it gave me 420 FPS.
I have had continued issues with my graphics: [URL]... Now, after an update manager update, I have a new issue. My mouse cursor disappears when I use my external monitor beyond a given resolution. Also, my settings for the laptop monitor are incorrect (will not let me select the true laptop native resolution). I even had an instance when I had mirrored images, but saw the mouse pointer only on the laptop screen, but not on the external monitor. I also recently did the suggestion to
Code:
gksudo gedit /etc/default/grub
GRUB_CMDLINE_LINUX_DEFAULT="i915.modeset=0 quiet splash"
Which had caused issues when I was previously running Ubuntu in dual boot with WIN XP. I am now on standalone Ubuntu 10.04. I reversed the grub edit, but the problem persists. Currently, I have to keep my external monitor at a much lower resolution for mouse pointer to show up, or use the CTRL key to show mouse pointer location feature in higher resolutions. All other aspects of the higher resolution for the external monitor work well...just that my mouse cursor does not show up.
I'm on an HP envy with with hybrid graphics configuration. I installed debian 7.7 from DVD, but it failed to load i915 driver on its own. It loaded nouveau. But gnome falls back to classic mode. There is not brightness control either.I tried adding i915 to /etc/modules and also blacklisted nouveau at the command line. Now i915 gets loaded, but with some hickups as shown in dmesg. Still I'm in fallback mode in gnome.
Code: Select alljay@aura-envy:~$ dmesg | grep drm
[ 16.152467] [drm] Initialized drm 1.1.0 20060810
[ 16.161706] [drm:i915_init] *ERROR* drm/i915 can't work without intel_agp module!
So I went ahead and added intel_agp (before i915 line) to modules file, but still no luck. I suspect there is no module called intel_agp at the first place, because :
Code: Select alljay@aura-envy:~$ sudo modinfo intel_agp
[sudo] password for jay:
ERROR: Module intel_agp not found.
URL....
How do I know if my intel chipset graphics card thing is installed?.
View 1 Replies View Related! I'm thinking of buying a corei5-660 on a motherboard with an Intel H55 Express Chipset. Does anyone know if it's fully compatible with OpenSUSE 11.3? I mean video (that comes from the processor, not an off-board PCI), audio (HD Audio), networking (Intel� 82578DC Gigabit), SATA Controller, USB, etc. I've tried to google but didn't find much info so I wonder if anyone is using or knows where I can find more info about it...
I have found this thread on the forums about the H55 chipset: Core i3 Intel Clarkdale graphic controller problem But the problems were facing on 11.2, I don't know about 11.3...
Happening right now on a Fedora XII 64 Bit:The latest Fedora kernel update (from today, 2009/12/01 - coming from fedora updates [not update-testing]) destroys my Intel GM45 (= i915 kernel driver) so much that I
1. Have no plymouth dooring booting (just this blue textmode lines on the bottom)
2. Have a completley black KDE screen (only my colorshaded windows shadows appear, if I rightclick into the darkness - with no contents) - that's however a composite effect which strangely enough works (Alt f2 reveals for the 10th of a second the "start application"-window and vanishes)
3. If I change to a tty console (eg.via CTRL ALT F5), in 3 of 5 tries the screen does not manage to change to the new video mode and flickers insanely (switching back betwwen CTRL ALT F1 [x-server] and CTRL ALT F5 [tty] a couple of times helps) which tells me that...
- at least KMS is gone.
- 3D-Compositing is completly messed up resulting in a unusable complete black GUI
However, beside this
4. the KDM login screen appears in its full beauty and so does the "KDE loading" thing. Going back to kernel 2.6.31.5 makes any of this disappear and working nicely (I defaulted this in grub now). The computer is a lenovo thinkpad SL500 (cheap intel dualcore 64Bit CPU) with intel GMA4500 chipgraphics (if its not something with my linux configuration it should affect other similar notebook types too).
I really use fedora on my notebook (right now with kernel 2.6.31.5). My desktop uses a radeon HD 4870 - big bad luck with fedora 12: The radeon driver is not able to show KDE windows the right way (looks really really bad - even with those "experimental" Mesa settings-trick) and the unfree AMD driver does not work under fedoras high X Server version (which may be better this way! ) . So I end up using windows on it, waiting for a decent radeon driver to kickstart a decent 64bit linux (fedora still being first choice as the right compromise between cutting edge and usability)...
I'm trying to use a monitor on the HDMI port of my Asus laptop which has Intel integrated graphics.
It doesn't detect the monitor using the display utility.
I have been trying to enable compiz on my fedora 14, but when i enable the desktop effects the graphics just crashes and fedora freezes. When i type lspci -nnk | grep VGA for the graphics card i get:
I made alot of research on how to get Intel graphics work on Fedora, but couldnt find any solution
Same problem I had with Fedora Core 12 and 13.
I have a laptop,it's main hardware is made by sis(not CPU) ,some monthes ago,I tried to run fedora 11 in my laptop,but I even can't install it,my laptop always dead in the installing process,so I had to restart it by the power button.I searched some information about this condition,but still can't get a ideal answer.
Fedora 12 can support sis directly?and how about the coming one-fedora 13.
i have a toshiba satellite p500 laptop which seems like it shold either have the intel hm55 express chipset or the pm55 i checked in win7 and cpuz says it is pm55 while pc wizard says it is hm55 ( though pc wizard seemed to be wrong with some other stuff as well) here is the so-called "detailed specs" from toshiba
[Code]....
I have really problems with i915 driver (module) and my graphic card on squeeze with gnome.There is a BUG and there is no any solution at the moment:[URL]So I'd like to disable i915 driver from the startup and load i810 module instead:
Code:
# modprobe i810
# modprobe i910
#
BTW I've tried to create /etc/X11/xorg.conf file with i810 module for the video card, but it doesn't work, i915 will be loaded.
Code:
Section "Device"
Identifier"i810"
Driver"i810"
EndSection
Is it any other way to blacklist i915 completely from the startup, for example in /etc/modprobe.d/blacklist.conf?
im having problems finalizing the installation of fedora 10 on a new ASUS P5E-VM that uses Intel G35 chipset.
1. i think fedora did not recognize the video driver since all the installation was in text mode and i cannot use "init 5" to load a UI
2. i tried to find some drivers (if any1 can recommend a rpm that i can download i will apprichiate it very much) but could not transfer them to the fedora since i could not mount any USB disk on key in the linux i tried using: mount -t vfat /mnt/usb (after mkdir /mnt/usb)
3. i tried to burn the driver but then could not access the dvd...
4. no internet connection yet... but thats because i cannot access my network drives that are on the USB key as well...
I'm still having problems with firefox 3.5 on Fedora 11. My computer freezes; and it takes a power-off reset to unlock it. Keyboard and display are unresponsive (x-server crash). It crashes even with Firefox 3.5 running in safe mode.
Configuration:
Hardware:ATI Radeon� XPRESS 200 Chipset
Kernel: 2.6.29.6-217.2.3.fc11.i586 #1 SMP i686 athlon i386
firefox.i586 3.5.1-3.fc11
flash-plugin.i386 10.0.32.18-release @adobe-linux-i386
Koji was used to update kernel and firefox. Thanks to wangmaster and other members, I was able to install Firefox 3.0.12, which is run using a different profile. Do I need a debug version of Firefox for a dump? Do I need to send this AMD machine to the landfill or North Carolina?
I am a recruit for Linux and install FC12 on my PC. The motherboard is ASUS M3N78-CM. The nvidia GeForce 8200 chipset on the motherboard is directlt used for vedio. The driver : NVIDIA-Linux-x86_64-190.42-pkg2.run is downloaded from Nvidia website, but it can't drive the chipset successfully. So i can not start X-window. If anyone has a solution to this problem?
View 3 Replies View RelatedI've been using F15 through the early releases and now with the final release, and in all of them I've had the same issue:
It will install fine in Parallels, however about 30 seconds to 1 minute after launch, it will hang and completely freeze. This will happen even in run level 3 with no gui running. It doesn't *appear* to happen at the same time every time.
I've tried, disabling networking, sound, and a few other things in the VM to see if that has an effect, but it doesn't seem to make a difference.
I've also tried making a copy of my F14 VM and upgrading. The same issue persists in this case as well.
I have had no issues with F15 on the metal on different machines, as a matter of fact it's been great and required very little hardware work-arounds. Similarly, F14 has run fine and continues to run fine on Parallels on this machine.
I'm trying to set up an HP DisplayLink USB graphic adapter on Debian 6 to be paired with the notebook's integrated Intel i915 video card. I use a custom 3.11.1 kernel in which the options for VGA arbitration, fbdev framebuffer and DisplayLink driver are enabled as built-in, not as modules.
The device works and I'm able to correctly run an X session on a DVI monitor connected to my notebook thru this USB graphic adapter. However, I'm still not able to use both the DisplayLink device and the integrated Intel i915 at the same time under X, with the purpose to extend the desktop area over the two screens, side by side.
During a boot, if the DisplayLink adapter is detected over the USB cable, the X-server's Intel driver is repudiated as shown in the logs below, and the main notebook's screen stops working with X. (nonetheless, it still functions on the "Alt-F1" text terminal).
Relevant portion of /var/log/Xorg.0.log
In particular, it shows: [ 2509.084] (II) UnloadModule: "intel"
Code: Select all[ 2509.061] (II) FBDEV: driver for framebuffer: fbdev
[ 2509.061] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
[Code] ....
In case it is required, this is the relevant excerpt of my xorg.conf. In my full xorg.conf file installed locally, no other options deal with graphics or screens.
Code: Select all# All down here is required for DisplayLink
# Depth must be 16 bits for all the screens to support DisplayLink
Section "Device"
Identifier "IntelVideo"
Driver "intel"
EndSection
[Code] ......
Lots of these in my dmesg, dont like that. Don't think it should be there. Don't know how to get rid of it. What i do know is:
It's intel graphic card related on Ubuntu 9.10 2.6.31-20-generic #57-Ubuntu SMP Mon Feb 8 09:05:19 UTC 2010 i686 GNU/Linux On a EEEPC 1000H
I use my computer on a TV using a DVI to HDMI cable using an i915. Its been solid every release until this one. I change channel and then return to Ubuntu I get no signal/ Purple screen. I have tried turning off sync to vblank in compiz and running Gnome Desktop with no effects both seem to make no difference.
View 1 Replies View RelatedIn the past, I've rebuilt the kernel with the i915 driver built-in, and that works fine. But is there any way to do this without recompiling your kernel? I read that I shouldn't use vga=XXX with Intel KMS.
I tried adding the i915 module to my initrd, but that gives me an error message on boot. Something like "Unable to initialize the agpgart module"
I'm a bit of fedora/linux newbie, and I just installed 12. I'm wondering if I need to install drivers for my 925x/ICH6R chipset or ati 4350? I'm using the 4350 to stream video to the TV. I have the BIOS set to RAID on the ich6r, b/c I may add a storage array in the future, but the boot disk is on a singe hdd. I actually downloaded the ati drivers, but the instructions had so many dependencies I got a little overwhelmed
View 7 Replies View RelatedI am still encountering problems getting the Broadcom 4321 chipset to work on my Fedora 13, even after using this guide, this guide and another guide on ndiswrapper.
To answer the standard questions:
Code:
Code:
Code:
Code:
and finally
Code:
But no wlan device or anything else.
Ok a little confused here. I got this working in f14 no problems but anyway. I have a wireless usb net card with a realtek 8192su chipset and of course it is not recognized.Dloaded driver from realtek unzipped tarball. Ran make clean and no errors then ran make all and this is what I get same with make or make install.
Code:
[root@donnie rtl8712]# make all
make ARCH=i386 CROSS_COMPILE= -C /lib/modules/2.6.38.6-26.rc1.fc15.i686/build M=/usr
[code]....
I am running fedora 10 on my laptop. I use a usb Western digital "MyBook" 500Gb (ext3). I am using this hard drive since more than 1 year now. Lately I run into a single problem when I read a precise file. The laptop becomes totally unresponsive and I have to manually shutdown the computer. After start-up I can find that the /var/log/message file of my previous session has grown very quickly with "[sdb] Sense Key : No Sense [current]" and "[sdb] Add. Sense: No additional sense information" messages.
I found various similar question on the web, most of the answer were hardware dependent and kernel related. I tried various kernel hoping that my specific problem would be fixed in the next one but with no success (all the kernel since fedora 10 release and two testing one: 2.6.29.5-84.fc10 and 2.6.29.6-93.fc10), I don't have access to a Fedora 11 machine.
I replaced the usb cable and check that the power supply was working correctly.
I am joining part of /var/log/message and the results of lsusb (related to the external hard drive).
Just upgraded to FC12, but when running azureus, it hang the entire system.Anybody had the same problem. I tried both yum installed and download from azureus site.
View 2 Replies View RelatedI have a GRUB2 USB multiboot setup. Plus I have a multiboot setup on my computer with Ubuntu 9.10, PCLinuxOS, Windows XP, and Fedora 13. The issue I'm having is different but the same. On my USB multiboot, Fedora will hang up on certain devices. Things such as touchpad, bluetooth, etc. On my PC it hangs up on first the bluetooth, then I unplug, then the USB hub, then the mouse and finally the external hard drive. It detects the devices but it freezes on detection. I did get this error before the device detection began:
Quote:
dracut; dracut-005-3.fc13
dracut: FATAL: Don't know how to handle 'root=(0,4)'
dracut: Refusing to continue
dracut: FATAL: Don't know how to handle 'root=(0,4)'
dracut: Refusing to continue
this is on the PC and the problem with the USB is that it will hang up when detecting devices.
I have Fedora 13 installed on a new PC and have two types of intermittent boot hangups. What logs exist within Fedora 13 that may help me identify the cause or causes of these hangups? Todate, a reboot gets over the problems but I wish to get this sorted whilst the PC is still under warranty.
View 6 Replies View Relatedi am working on a client server real-time gui application written in C++ for Redhat. There is an issue with this application that it makes the system hang. i am not able to sort out the issue as it happens randomly. Sometimes with in half an hour it makes the system hang, sometimes it takes 4 or 5 hours when it receives realtime data. Is there any way to debug this issue. I tried valgrind..but it was not of much use..
View 4 Replies View RelatedWhy my fedora 12 always hang and not responding?it is any problem with my installation process?when my fedora not responding,the only thing that i can do is restart it again.i did this again and again..
View 5 Replies View RelatedI disabled KMS and checked for direct rendering with the glxinfo command. glxinfo, reported that direct rendering is enabled. This is good news, because it means that the i915 driver is being used.
[Code]....
Now, I need to write a custom xorg.conf file to force X to use the native resolutions of my chip.