Fedora :: F14 Kernel Crash And Hard Freeze - Hang
Jun 9, 2011
I have a fresh installation from the demo ISO image of F14 running on an Acer TravelMate 4200. The system is a Dual Boot with win Vista. Windows Vista runs without any problems but when using F14 a kernal crash constantly occurs and it then hard freezes or hangs and the machine needs to be cold booted. There is nothing in particular that I am doing either, the problem happens when the machine is idol or when I am working in various apps.
The F14 system is completely up to date running kernel version 2.6.35.13-91.fc14.i686. The following error below is from the automatic bug reporting tool and I have reported this using the tool:
Package: kernel
Latest Crash:Sat 04 Jun 2011 14:55:00
Command: not_applicable
Reason: BUG: unable to handle kernel NULL pointer dereference at 000000f8
Comment: None
Bug Reports:
View 2 Replies
ADVERTISEMENT
Jul 20, 2011
My problem is that my server randomly hangs. If I remember right it started after an kernel update (can't really remember if it was a kernel update specific, but I did install new updates before this problem occurred), and then I noticed my server was down one day, after that the problems/random freezes continued. And there are no pattern/interval between the freeze ups.
I think that all this started for about 3 weeks ago, so I've never had this problem with Ubuntu 10.04 before.
At first, I thought the source to my problem was an old IDE which I accidentally left in when installing Ubuntu at the first time, so GRUB was sitting on that one. So I backed up almost all of my data, reinstalled Ubuntu 10.04 (downloaded from the website) but this time without the old IDE drive. Everything seemed to work, had no crashes or freezes. I do have to mention that the same thing happend to the live CD before I removed the old IDE.
But now the fresh install of Ubuntu seems to hang too. And the worst part of this is that I can't really do anything about it to test or look up what may cause the problem, as I have to access it remotely because I'm on vacation right now (I'll have to get my friend over there and restart it).
When the computer hangs it comes inaccessible from the network, can't even see that it is up in my router. But I do know it is running, else it would have been shut off and then started up again and work.
Before I re-installed it, this problem could be reproduced by surfing the web and watching flash videos in either chromium or Firefox.
And I do know it sounds silly to run a server with the desktop edition installed, but if I don't have any other computer accessible, I use my server instead.
My server specs:
CPU: Intel Core 2 Quad 2.5 GHz
GFX: XFX Nvidia Geforce 8600GT
Mobo: EVGA 750i FTW
RAM: Corsair Dominator 2GB
HDD: Western Digital 500 GB
I also have no special effects nor do I use any proprietary drivers (I did before I re-installed).
Any ideas of what it might be? Is it a bug which came with the updates, like a bug in the kernel?
I've noticed that there actually are alot of threads like mine around here, but none have provided a working solution.
View 9 Replies
View Related
Aug 31, 2010
My issue is: I am "locked" on kernel 2.6.18-164, I just can't get my server up and running with any later release. It simply hangs at "Starting udev".
The hardware is:
MB: Asus M2N32-Deluxe
CPU: AMD Phenom(tm) II X4 920 Processor
Boot FS: Ext2
RootFS: xfs
RAM: 4Gb
I have 2.6.18-194.el5 running on other machines.
PS: I'm about to install/update a fresh 5.5 disc for testing purpose anyway. I'll update here if it works.
View 3 Replies
View Related
May 10, 2010
It seems that my Ubuntu 10.04 (clean install) to randomly freeze / hang (mouse/keyboard unresponsive, only a hard reboot is available as option) but with no garbled screens/windows/etc. There's no pattern why or any application that could be responsible. It could happen ten minutes after it is started or after 2 days but at some point and suddenly the system will become totally unresponsive, freeze and hang up. I used the same PC with Karmic Koala and releases before that (sometimes on for days) with no such problem so it shouldn't be a hardware problem.
I thoroughly check system logs after the hard reboot (System > Administation > Log File Viewer) and there's no entry around the time of each freeze / hang to pinpoint me to something.
The only thing that is certain is that the following errors / warnings always appear in .xsession-errors file:
Here is also some info about my system:
M/B: ASUS P4R800-V DELUXE
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz
RAM: 1GB
Graphics: ATI Radeon 9100 IGP
View 9 Replies
View Related
Feb 13, 2010
I tried KDE 4.4. I'm back to using KDE 4.3.5. Very bad experience for me, maybe it's just my system openSuSE 11.1 on AMD x86_64 with 4gb memory. Dolphin was unusable. Deleting a file cause it to crash, go in to a directory with a large number (20,000) of images and it would hang and eventually crash. PIM has removed some of the features I used, main one being ability to add Custom Fields to Contacts and assign categories.
In general, the whole thing was slower, not faster, probably because now it requires Neopmunk to be running and the Akondi server. I'll wait a while and try again and see if it gets stable in first update.
View 4 Replies
View Related
Jul 15, 2011
I'm migrating from XP to Ubunta 11.04. My PC: Toshiba Sat A30-921 L/top CPU: Pentium(R) 42.84GHz RAM: 512Mb Display Adapter: ATI Radeon 9000 IGP K/board: std 102/103 PS2 Pointing Device: Alps PCMCIA Adapter: ENE CB1410 Cardbus Controller Wireless Adapter: D-LINK GDWA 610
The installation went well from start to finish. Made it dual boot with XP. Hooked in the Eth cable & went online right away. Then enabled the W/less network adapter - all OK. Using 'Classic', so it's just normal screen after boot. Problem is random 'Freeze' or 'Hang Ups'. It's hung 12 - 14 times in 2 days! K/brd T/pad frozen out. Only recovery is to use master power switch & reboot. NEVER hung in XP in 7 years! (done other bad things though) Does Ubunta have switch like Cntrl + Alt + Delete in Win?
Tried many combinations but to no avail. I've tried quite a few Linux flavours (from Live CD) & they all displayed the same fault!! Before it hangs, I've been able to browse around Ubunta Apps: Places: System: Firefox: Internet: etc. Where do I start to track the problem down? I'm vaguely familiar (XP) with Terminal & cmd line processor but dont know any of the codes used.
View 2 Replies
View Related
Apr 26, 2011
I have a problem with getting my Linux distribution (Debian amd64-bit) to install. Everything works the way it should - from booting a live CD/DVD (any distro) to running the text-based or gui installation right after bootup. Up until the Linux installation gets to the step for detecting my SATA hard disk drive(s), but before (or at the same time as) initiating the partitioning step, it'll freeze/hang my screen and my CD/DVD drives instantaneously - and the only fix is a forced shutdown and/or hard reboot.
I don't know what causes this, but I tried googling online and all that I really found out was that it might be an issue with running 32-bit vs 64-bit installations - but this is not the case; from running Gparted on Knoppix 32-bit or the partitioning step during a Debian 64-bit installation. Also, I read a random post online related to running kernel commands / parameters alongside the installation (e.g. acpi=off or something similar) stating that it might help?
Anyone got any ideas or solutions? I'm a real newbie when it comes to Linux (though, I'm quite knowledgeable when it comes to computers and technology, and Windows) - else I wouldn't be posting in this forum sub-section, hehe. I can't quite get my head around this one - despite trying my best to find a solution online beforehand.
View 2 Replies
View Related
Aug 7, 2010
After updating to kernel-2.6.33.6-147.fc13.x86_64 (and updating all kmods) VirtualBox guests no longer boot.
I had a Windows guest (from now on refereed as Crapdows) that worked normally. After the update, I could get to the "Start Windows Normally" screen, but then Crapdows refused to boot. At first, I thought it was a crappy M$ bug, but after creating another VM (Doublecrap), and starting from scratch, I was able to get to the "Windows is loading files" screen, and then the guest hangs again.
This problem is generalized to all OS'es I've tried. In Ubuntu, I can get to the language selection screen before the installation freezes. The same applies for Fedora and SUSE guests.
Is it time to get my hammer?
View 4 Replies
View Related
Nov 18, 2010
I used to have FC11 installed with the nvidia supplied binary driver. Worked fine, very stable. Trying FC12 and FC13 live CDs caused a hang, so I stuck with FC11. FC14 live CD did boot so I backed up my own files and did a clean FC14 install. Upgraded to get kernel 2.6.35.6-48, installed the nvidia driver from RPMFusion (260.19.21) and had a working system! Now, after a cold boot, the kernel always hangs during boot. Tried a number of kernel boot option (apci=off, noapic and a few others too). The hang is not always at the same place. The earliest it has hung is after:Disabling lock debugging due to kernel taint
Sometimes its a few lines later at:NVRM: loading NVIDIA UNIX x86_64 Kernel Module 260.19.12 ...(which would seem to imply that the hang can even occur a step or two before the actual driver is loaded!)
Sometimes it keeps going for a few more seconds and randomly hangs during some other driver load.
Without a specific nvidia driver the system always boots ok, so I'm pretty sure its the nvidia driver but I just can't seem to get a handle on this in a reproducible way. Sometimes, when I have make some other change, it will boot and work ok, but a reboot locks it up again (for example, in case it was SELinux, I disabled it and on the next reboot it booted and worked ok. Then, next boot, it wasn't working again). When I make changes, I reboot using the previous kernel, make the changes and reboot, with an occasional success. Once I start rebooting using the latest kernel, it always hangs.
I'd love to get a solution to this, but even some advice on debugging this would be appreciated!
I'm using 8600GT, 256Mb, PCIe card in a MA69VM motherboard with 3Gb of RAM.
View 2 Replies
View Related
Dec 26, 2010
I tried this kernel released on Dec 21th. It makes my F14 constantly suddenly freeze in GUI with no keyboard/mouse response anymore before restart. Only thing to do in this situation is press power-off button and after restart I found no hint in logs.My laptop is thinkpad t400 and I think it's a very common installation.Now I revert to older kernel 2.6.35.9-64.fc14.i686 and it's works quite well.
View 14 Replies
View Related
Sep 15, 2010
Is there any Slackware-current or Slackware64-current users in the LQ Slackware forum experiencing lags or slowdown on Dolphin file manager on KDE 4.5.1? I experienced this first on KDE 4.5.0, after the current update KDE to 4.5.1 I still have this problem.
Hovering mouse on a file can take a while, opening a text file with kwrite took several seconds and dolphin window will appear blank (like hang). Sometimes Dolphin crashed when opening file, changing directory or hovering mouse on a file.
Quick googling points to this discussion at http://dot.kde.org/2010/08/31/kde-releases-451 which suggest a bug in libdbus.
View 8 Replies
View Related
Jun 4, 2011
I have installed Ubuntu 11.04 64 bit desktop version on ext4 partition without swap. I have maximus iv extreme motherboard with 8 Gbytes RAM. Using 3 internal ntfs formatted hard drives and 3 external ntfs usb 2.0 hard drives.When I am trying to copy or move files FROM or TO any ntfs partiton it is 90 percent chance it is going to freeze.For copy/moving files I am using krusader run as ROOT or as user without root privilege or Nautilus as user without root privilege. It wasn't possible to switch to another terminal - it simply does not react on keyboard or mouse input and only hard reset is possible (scares me because of ntfs disks)From this point of view I have suspicious on ntfs driver but:I am completely beginner in linux and I am looking for help to navigate me how to investigate to find what is causing the problem eventually to solve it?
According to my experience it seems to does not matter if hard disk is internal or external connected through SATA II or SATA III or USB 2.0. I have tried to manipulate with ntfspartitions through the vmware or virualbox or truecrypt software or just do a simplecopy/move files - it have has always the same results - freeze. There is not possible to say how long it is going to work properly and when it is going to freeze - sometimes it's working hour, sometimes it's working couple of seconds - no matter if it is read or write operation/s within ntfs partition.
View 3 Replies
View Related
Jun 17, 2009
I installed F11 x86 from the DVD onto one of my machines using a total of 4 partitions:
1. /boot
2. /
3. /home
4. swap
I then created an image of the first 3 partitions with fsarchiver and restored it onto a second machine (with different hardware). Grub was loaded onto the second machine as well without a problem. The new cloned install will get past grub fine but the kernel hangs. After removing 'rhgb quiet' from the boot options, I can see that the last message outputted to the console is something about the PS/2 mouse - this doesn't make sense as the mouse is working perfectly fine.
Additionally, I can still reboot using ctrl-alt-delete so the kernel/CPU must still be responsive. I have tried troubleshooting the various pieces of hardware, so I'm guessing it's something with the clone. All the cloned filesystems appear to be fully intact; the partition UUID's are all the same. I've even tried changing the UUID's both in grub and /etc/fstab to hardcoded /dev/sdaX , but this does not fix anything.
View 2 Replies
View Related
May 11, 2011
I just updated to kernel 2.6.35.13-91.fc14.x86_64, and I'm now having a weird issue where my computer will hang during startup and shutdown unless I move the mouse around.
While moving the mouse, it will boot up or shut down normally. Once i stop moving the mouse around it will hang (until I begin to move the mouse again).Once fully booted it acts fine..
View 13 Replies
View Related
May 16, 2010
I've been running F@H on my system for a while now, these specs:
ASUS Rampage Formula
Q9450 @ 3.6Ghz
4GB DDR2
8800GT 512MB
Fedora 12
Running various different nvidia drivers, with working 3D, and running the latest nvidia drivers with cuda for GPU2 folding + SMP folding.
I decided to add a 9800GT to the machine for more folding PPD, and I've run into some issues.
Firstly there were problems starting X, it would hang as it started or even before it started, so I switched to RPMFusion's repo drivers which have the VGA_ARB patch applied. This now gets me into X and working 2D.
The problem I have is, although the system is completely stable running folding on all four cores, SMP, 24/7, as soon as I start anything involving 3D (such as glxgears) it will run for 3 seconds then hardlock the machine. I mean seriously lock it, no switching to terminals, and an ssh session into it from another PC dies.
Its the same with any other driver that will boot into X with the VGA_ARB patch (talking nvidia binary here).
Both cards work perfectly individually, AND both cards work, including full 3D in Windows 7 when together, which would tend to rule out a hardware fault.
Here is my xorg.conf
Code:
View 1 Replies
View Related
Jun 20, 2010
I installed a fresh copy of Slackware 13.1 (stable) on one of my media servers and I am experiencing something strange.... When I power up the machine, I see the kernel booting, no errors, until it gets to the point where it says:
And then randomly freeze there.... Well the machine is not totally frozen because the cursor still blinks. But it will never continue... Like I said, this happens on a random basis... After a reset, it might go through or simply stall at the same spot.
I remember after installing Slack 13.1, I rebooted the machine but forgot to remove the DVD from the player, so the install routine started up, and froze at the same point when it was loading the kernel for the setup programs...
My mobo is a MSI k9N platinum.
I never had this problem before.... (well I never used 13.1 before). Since I got this machine, I used slack 12.2 and slack 13-current with success.
This problem makes the machine extremely unreliable because I intent to use it as a backup and media server, so chances I will WOL the machine and use it remotely... if that happens.
View 10 Replies
View Related
Mar 8, 2009
The only error message I am able to retrieve is in the GDM 0.log as follows:
AUDIT: Sat Mar 7 17:58:27 2009: 5034 X: client 9 rejected from local host ( uid=500 gid=500 pid=5066 )
View 6 Replies
View Related
Apr 13, 2011
I just installed 2.6.35.12-88.fc14.x86_64 via Software Update and rebooted. When selecting new kernel to boot from, the boot sequence doesn't finish. I am not sure how t o troubleshoot; I am prompted for the PassWord for encrypted /home, but after that, it freezes.
View 8 Replies
View Related
Dec 25, 2010
Anyone familiar with QEMU? I'm attempting to load F15 for testing purposes along with REL 6. This is what happens, all goes well until it is actually starts downloading files to the virtual disk which appears to work until it gets to about 1/2 way completed, then it hard crashes(actually shuts the machine down). Also I had to turn of ACPI because when it is enabled it just hangs the VM altogether. I'm wondering if I should also turn off APIC?
Is there some way of loading a VM in verbose mode or debug mode to see what is happening and maybe causing this hard crash. The log files for QEMU shows nothing other then the normal loading of the virtual machine, its given name, source ISO and things of that nature.
View 1 Replies
View Related
Jan 31, 2010
I am having a problem with lockups on a new FC12 box (dual core 3 ghz, 4 gb memory,nvidia 8400gs). This happens reliably when replaying MythTV videos, but also randomly at other times using other apps (I suspect also boot but I can't be sure; it just occasionally stalls part way through the boot display).
Usually but not always this is accompanied by a kernel panic (caps lock + scroll lock lights flash on keyboard).
I did a core dump with kdump and it reports: Thread 1 (<main task>): Cannot access memory at address 0xffff880028025b70I am in the process of running memtest86+ right now. It's been through several passes without errors. I'm going to let it run some more, but if that is dependable it's looking like the RAM sticks are not the problem.
View 9 Replies
View Related
Dec 26, 2010
The best word that suits me to introduce is I am a novice! :-) but it is the difficult part get over with the new things and learnings!
Well once such situation made me introduce me to you is "Kernel Crash". I've recently installed Fedora 14 64 bit version on my HP HDX premium series, since then this Kernel crash is chasing me down! code...
View 2 Replies
View Related
Nov 29, 2010
I seem to be having a problem on the new Kernel (2.6.35-23) with the system randomly freezing.
I have installed a number of things in recent days leading up to this problem, but when i boot with the old kernel i don't seem to have any issues. From this i am guessing its the new kernel.
The freezing seems (although i am not sure) to be worse when Rhythmbox is running. When it happens everything freezes, the playing song skips, replaying the same one second of music over and over. All the hotkeys stop and the mouse cursor stops responding.
I have seen people talking about system logs to look at system crashes but i don't know how to show those. I also doubt my ability to interpret them.
View 9 Replies
View Related
May 3, 2011
Today im experiencing many freezing issues with my office desktop running lucid amd64.
Every application i run, seem to randomly freeze and then crash.. i dont understand wy, yesterday the pc worked as usual.
I was using kernel .38, i tryed to switch back to .32, but nothing change;
This is my apt history (some packages has been updated yesterday):
Code:
I dont see any packages that can cause this error. The freezes seem to be related to the hard disk: if i try to copy/download large files, the freezes happen instantly; but i've tryed Smart test from disk utility, and GSmart from a live cd: the hard disk seem to be ok. Even memtest doesnt report any error.
View 9 Replies
View Related
Feb 4, 2010
I've installed Centos 5 on 2 serveurs.The first one export the file system with NFS.The second one use amd to automount the filesystem with the link/net/@IP/Shared/folder/On the client side, I mean the second server, there is some logs into the messages system telling us the the process gam_server as crashed (segfault)On the first one, sometime, NFS Freeze, and nothing is available. This need a Hard reboot of the server in that case.
View 5 Replies
View Related
Nov 25, 2009
I just installed it on my ancient IBM T-42 thinkpad, and am completely satisfied.
However, I want to help fedora get better.
I keep getting notices that there is some sort of kernel crash.
See cut and paste below.
When I try to use the automatic bug reporting, it fails to do it.
I have attached a screenshot of what happens when it doesn't report it.
View 1 Replies
View Related
Dec 21, 2009
Sound disappears as soon as I try to use an application e.g. News Video Fox, CNN, BBC or playing a video disk or cd disk, and a kernel module crash is reported (listed below from logs) After this happens no sound, and the desktop freezes (X11 only Linux is fine). Restarting X obviously do not solve the problem.
It seems that Fedora 12 has sever problems with Intel Sound cards.
I guess it is not really a Kernel developers problem but more the authors for the sound module causing the crash. I already reported it through the popup to "kernel-oops" by clicking on the "black screen" popup reporting the crash on FC12.
Here follows the logs containing the crash info.
WARNING: at sound/pci/hda/hda_intel.c:565 azx_send_cmd+0x36/0x1df [snd_hda_intel]() (Tainted: G W )
Hardware name: Macmini2,1
BUG?
[Code]....
View 2 Replies
View Related
Oct 15, 2010
I previously had my bt878 capture card setup with Ubuntu 10.04 and it worked fine with Zoneminder. However, after having done a clean install of Ubuntu 10.04, the card causes Ubuntu to freeze whenever I attempt to view the image in a viewing program (happens in tvtime, Cheese and Zoneminder)I have added bttv and bt878 into /etc/modprobe.d/options like before, and have also added options bttv card=77 tuner=-1 into bttv.conf in the same directory (had to create bttv.conf)The freeze causes the whole computer to lock up, and nothing on the keyboard or mouse is responsive, and involes having to do a hard restart.The only difference I can see from before, is that I have installed all of the latest updates with Update Manager, so maybe a new update is causing these problems?Output of dmesg � grep bttv
Code:
[ 18.149815] bttv: driver version 0.9.18 loaded
[ 18.149826] bttv: using 8 buffers with 2080k (520 pages) each for capture
[code]....
View 1 Replies
View Related
Jul 13, 2009
My graphics card (00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03))
used to work fine, but yesterday I opened glest and it crashed my computer within 5 seconds. No picture was ever displayed. I downloaded another 3D game called Nogravity (Glest being my only one, I wanted something else to test) and it crashed after a few minutes of play and I had to restart. After all the crashes kerneloops came up with a report.
Here is the most recent one:
Code:
I did recently notice that I have no direct 3D rendering, it comes up with something like: No (LIBGL_ALWAYS_INDIRECT SET)
I do not know whether I used to have it, but I do know that 3D apps used to run perfectly well. (In fact the stability of 3D apps was what converted me from Ubuntu where they crashed every 5 minutes)
I ran glxgears for 5 seconds and it gave me 420 FPS.
View 3 Replies
View Related
May 30, 2010
I just install F13 yesterday, before that I use F12 and it works well with no problem. The biggest and only problem I have with F13 is wifi network. If I turn on wifi switch before OS start, WIFI LED lights and wireless works. Then I try to turn off switch and turn on again, but the LED doesnt light any more, so wireless is also silent. The bad thing is there are many notifications of kernel crash.
View 5 Replies
View Related
Aug 31, 2010
I write the network driver. Transmission of packets in user space I do through netlink socket`s. In user space there is a handling of packets and their transmission on other device (however, it isn't important).
Problem in that any time, packets through the driver in system, and is reverse, are transferred normally. But then there comes the moment when the kernel crash. If to look in syslog it seems to me that comes deadlock. Also I think that it is related with netlink socket`s.
I can't find the information on that anywhere how correctly to use netlink socket`s in kernel space. Can at you will any a reason into the account of synchronization of sockets and the driver in kernel space?
I can give the driver code if it is necessary.
View 2 Replies
View Related
