Fedora :: Mail Client \ Doesn't Hang Immediately After Trying To Open The Pipe But Within A Few Minutes?
Jan 4, 2011
I've been using Claws for a long time and I like its filtering capability, however this app is hanging,hogging 100% of the cpu time. the last version was similar, but the latest version hangs after an hour.I've run it in debug mode, and with strace but nothing stands out I'm suspecting that its the way it looks for a pipe used by pulseaudio, which is not installed. It doesn't hang immediately after trying to open the pipe but within a few minutes. I'm not getting any success from the claws group, so time to look for another mail applicationI'm open to suggestions, I've tried Tbird and found the filtering lacking.there is a catch, I need to be able to import the mail from Claws-mail into it.
I just installed Steam on my Linux machine tonite, following this guide [URL] ....
When I try to get the client going, it just connects to my account, checks for updates, verifyies data, and then starts over. It will keep doing that until I end the program, and never opens so I have access to my games.
I don't know if it is useful or not, but here is a picture I took of terminal I ran steam from (I don't know how to do a screen capture in linux).
I have set up postfix and dovecot as per the Ubuntu anual and appear to have a functioning mail server.Using the sendmail command I can send mail and I receive mail in ~/Maildir. Using Thunderbird I can read any mails received but I can't send any mail from Thunderbird. I have tried with both STARTTLS and SSL/TLS and whilst I get the prompt for a password I keep getting the message my password for my server is wrong.I have ports 25, 465, 587 and 993. Is that all the right ports?When I ping my domain name it resolves to my router name whereas I believe it should resolve to my IP. Could there be a problem with my host file? I've had a play but to no avail.Here's the error in mail.log.
I need help in setting up the native e-mail client included in Debian Squeeze. My ultimate goal is to have the Debian e-mail client download e-mail messages and process attachments automatically.
i have redhat linux 5 (2.6.18-53.el5) and i am trying to install davmail as mail client for MS exchange mail system. i am trying to install davmail latest i.e 3.6.6-1032 x86 version. i installed java 1.6. and excuted java -version. it showed me correct version. i.e java 1.6. but when i ran ./davmail.sh it gave me following message it opened port 389 and the next message was DEBUG (checkrelease) davmail: unable to get released version what could be the problem
is it possible to import mail from older evolution client (GNOME evolution 2.28.3) to the evolution now running on fedora 15 ( Evolution 3.0.2)on the older client, there appears to be a .evolution folder off home directory and mail under that.However I dont see this hidden directory on fedora 15.Is there a way to transfer the mails?
I have a dual boot setup with two hard drives. Windows 7 is running on my primary drive with Ubuntu 10.04 on the secondary drive. I installed GRUB 2 to the secondary hard drive, and I'm booting from that. Everything seems to be working well with one problem. Every time I shut down from Ubuntu and tell it to load Windows (it doesn't matter if it's a reboot or power off/on), Windows locks up during its boot. If I power the laptop off and back on, I can select and load into Windows just fine. It just takes two attempts EVERY time.
I'm running an up-to-date Lucid Lynx but now getting irritated by a bug or problem (I'm not sure whether it's a bug) in Gnome-panels. The problem is whenever I add a new panel in Gnome Desktop, the new panel doesn't appears on screen and needs to be re-logon to appear. It seems a known issue when I checked for the same at Launchpad, but it existed in betas.
I found this trouble since I have made a clean install of Lucid but thought it'll be fixed in any of the updates, but it didn't solved even after the most recent update I made this morning. I wanted to report this bug but didn't knew how to file bug for gnome-panels as there's no option like 'Report a problem' for gnome panels.
When I give the command: winexe --interactive 0 --user <user>%<password> //<ip_address> 'cmd /C dir' I receive the message: ERROR: Cannot open control pipe - NT_STATUS_ACCESS_DENIED The source machine is a RedHat EL4 server. The target machine is a Windows XP Home SP3 pc. When I give the same command to another pc all works fine. The other pc is a Windows XP Prof SP3.
I set up a git repository on the live site of my website using git init. Then I created the same repo on my local machine using git clone command. Then I made a few changes and committed them to on my local repository. Then I tried to use git push origin alongside the ssh path to my repository on the remote machine to update my live website. However, I noticed that git-push only changes the head of my git repository on the remote machine and it doesn't change any file.
In order to update my remote repository I have to issue the following command after I use git-push.
PHP Code:
git reset --hard HEAD
This is a two-step process for committing changes to the live site. I was wondering if it's possible to merge these two steps in one to make life a little bit easier?
Note that, I'm the only one working on this project (sometimes from my laptop, sometimes from my desktop), so I trust all the commits.
Ubuntu 10.04. I want to change the startup sound and the mail alert sound (incoming mail) for Evolution Mail Client. I go to System > Preferences > Sound, and all I get are themes preset. I do not have option to browse to wav files. I also do not see a browse option in Email Settings. Do I have to change an actual file?
I've written a simple server in linux used fork to create a FIFO pipe.The server create two FIFO pipe.One for server read data from client and write data to client.Then another pipe for client read data from server and write data to server.When the server read data from a client used server-pipe and then write data to client.But ,if the client no read open the pipe,the server side write will be crashed because of a broken-pipe SIGPIPE. How to check whether the read side is opened?Or,how to catch the SIGPIPE,and then my server will still execute on,not crashed!!
I'm having a problem when browsing shares on other machines. If I hit alt+f2 and enter "smb://server" I get an error saying: Could not open location 'smb://server/' No application is registered as handling this file If I enter "smb://server/share1" everything works fine. Typing the server name without the share name worked fine in Fedora 8, which is what this machine was running before I did a clean install of Fedora 10.
Generic Intel(To be recommended for use on distributions that are not transmitted for):
# su Password: ******* # cd / # tar xvfj fcc-9.124-Linux.i686.tar.bz2 Dependencies:
- The packages should bring down the appropriate dependencies when installed, in case the generic package is needed, the following dependencies are needed:
QT 3.3 libartsc 1.3.2+ libpng 1.2.8+ libjpeg 6b+
How do I know that the dependencies above are implemented?
I cannot get exim4 to actually deliver any "local delivery only; not on a network".But whatever I do in the config, all mail gets frozen with entries in the log file like:"root@empty R=nonlocal: Mailing to remote domains not supported"Maybe the problem is that there is no fqdn for the computer (and will never be). How can I enable local mail delivery?
How do I make a local mail server that itself is a client to a WAN mail server.I want the local mail server to query new mail every 30 minutes from the WAN server.
Somehow and I'm not sure how. But opengl apps will completely hang Ubuntu 10.10 x64.This is my 2nd fresh install. I'm using the latest nvidia driver for my asus gtx460 (260.19.12)Have already verified rendering is enabled, uninstalled nouveau & blacklisted, mesa glx is installed, no errors (that I can see), etc.When I run apps, even a gl screensaver, it will hang my whole box. To the point where I can't even, ctrl + alt + F1 (or F2, F3), for cli. So no command line output. And I've tested this in World of Padman, Alien Arena, Call of Duty 4 (under Wine), even Amnesia: The Dark Descent. Apps will start, but any gl content will quickly hang.This is the first time running ubuntu x64, and a new box
Hardware: Processor: AMD Phenom II 965 BE 3.4 RAM: 8 GB of Corsair XMS3 HDD: 600GB WD Velociraptor HD Graphics: ASUS ENGTX460 1GB Motherboard: ASUS M4A87TD EVO
I'm doing ping between 2 RH servers through a VPN site2site tunnel and in some times I got in the result pipe 2 and another pipe 3 as I mark it in blue color below.
e.g.
64 bytes from 192.168.1.10: icmp_seq=0 ttl=128 time=0.229 ms 64 bytes from 192.168.1.10: icmp_seq=1 ttl=128 time=0.287 ms 64 bytes from 192.168.1.10: icmp_seq=2 ttl=128 time=0.278 ms
[code]....
What's the difference between pipe 2 and pipe 3 and what's the meaning of it?
I'm using opensuse 11.4 64 bits on an amd 3 kernel. One day it's working fine and the following i't works all fine except konqueror and dolphin. When i try to open them it seem to be frozen (the application, not the system), but in the end they open after 3-4 minutes. Then they work well, but if i close them and open again, or if i open another window I have the same problem. Othe applications (for example firefox) launch quickly.
Everything worked fine in Kubuntu 10.04 (64-bit). On the upgrade to 10.10 (64-bit) it takes about a minute until I can move the mouse after startup and the integrated memory card reader doesn't work (but the green LED which used to only come on when there was a card in there is now always on). This has been discussed twice before: here (closed and solved by unplugging cardreader which I do not want to do) and here (unsolved but closed as maverick no longer in beta) dmesg (note the errer -110) follows. Let me know if I can/should include any other logs/info!
Code: [ 13.575002] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 13.790470] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 13.903728] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 16.280020] usb 1-5: device descriptor read/64, error -110 [ 17.375755] sky2 0000:02:00.0: eth0: enabling interface [ 17.376174] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 17.377028] type=1400 audit(1290608578.996:5): apparmor="STATUS" operation="profile_load" [Code]......
my open office is experiancing some problems. 1.) sometimes when I go to edit a document it freezes for up five minutes before allowing me to continue. 2.) it isn't allowing me to save any new documents or overwrite existing ones. 3.) it's taking an EXTREMELY lone time to load current documents up to an hour or sometimes not at all.
I've been trying to install OpenSuse 11.0 on my ten-year-old Gateway desktop. It has been showing this screen for approximately thirty minutes. In case you can't read it, it says 'Decompressing Linux... done. Booting the Kernel.' I booted from the CD, and the OpenSuse screen came up, and I selected 'Installation' from the menu. And here we are.
I've had this happen so often in the past, that I'm ready to ditch firefox altogether. I'm running F10 on a 3Ghz Intel dual core processor with a 500gb hdd. l prefer that my browser start up with a full screen when I launch it and firefox has been doing this just fine for the past 8 months. When I fired up firefox (version 3.0.13) this morning, it started up using only half the screen. As I've mentioned this has happened to me in the past and I've never been able to figure out how to get FF back to starting with a full screen. Does anyone know how to make it default back to opening in full screen mode? I've attached an image of how FF is opening now.
On my Seagate DockStar torrent box running Debian Squeeze, I want to send email when a torrent download is done. What email client is good if I want to send e-mail via gmail server?
