Fedora Hardware :: 15 Nvidia GeForce Go 7400 Gnome 3 Shell Hang On Login
Jul 12, 2011
I've seen a lot of posts related to problems with GNOME 3 shell and nvidia drivers but I have yet to find anything that seems to fix my problem. At this point, the laptop, a Dell D850, boots just fine all the way to the gdm login screen. When I log in, the background and menus initialize and the mouse can be moved around, but nothing works---I can't click on anything, Alt-F1 does nothing, and I have to switch to a VT and shut-down X. I've uninstalled all things nvidia and now I have a working laptop, so long as I use Classic with Compiz.
I upgraded two other hosts, but both had ATI graphics cards; they worked without a hitch. I'm regretting having decided to upgrade this laptop
View 2 Replies
ADVERTISEMENT
Mar 8, 2010
i using sony vaio sz440 t5500 and installed fedora 12,but it cannot enable 3D on fc 12
Code:
lspci | less
01:00.0 VGA compatible controller: nVidia Corporation G72M [GeForce Go 7400] (rev a1)
View 4 Replies
View Related
Jul 21, 2011
Can anyone recommend a good fairly current distro which provides Gnome and well-supports an Nvidia Geforce 9600 GSO card? It appears the current versions of Ubuntu 10.10 and Linux Mint 11 do not, meaning they are now useless to me.
View 4 Replies
View Related
Feb 19, 2009
Forgive me if this was already posted but I couldn't find it. I am attempting to install F10 on my Acer Aspier 8730-6031, but I have video drive compatibility issues with my 9300m. Does anyone know of any drivers for this card or any fixes?
View 2 Replies
View Related
Mar 25, 2010
I want to install the proper drivers for my system .the drivers are here: [URL] and come in a .run format (archive format I guess?) Anyway. If someone has done this with these drivers or other nvidia drivers and has some advice. Please, I'd really rather NOT end up screwing up my system or end up accomplishing nothing at all because I did it wrong.
View 1 Replies
View Related
May 28, 2010
I just installed F13, congrats to the community for the awesome work - everything worked straight out of the box .
Unfortunately, I need to install the proprietary NVIDIA driver for my job (CUDA stuff). I first installed F13 + kmod-nvidia from Fusion on a machine with a GeForce 7200GS, and everything works ok (after turning nouveau off).
Then, I proceeded to update another machine featuring a GeForce GTX280 (again, nouveau blacklisted). The install was apparently successful, but X turned out to be extremely unstable and always crashes a few seconds into the session, either by leaving a blinking screen or by causing the machine to reboot. Thinking that some file might have ended up corrupted, I reinstalled F13 and tried nvidia-graphics from ATrpms. The result was the same: computer hanging a few seconds into the X session. Finally, I installed from the NVIDIA sh package, and again same outcome .
The card is most likely ok because I ran it with F10 till yesterday flawlessly, so I can only guess that it is the new version of the driver coming broken from NVIDIA. I tried installing version 185.18.36 but it cannot figure out the version of my kernel headers, and the legacy versions available from the repos do not support the GTX 280, so I cannot be positive about version 195.36.24 being bugged.
Both machines are x86_64 (a Phenom II and a Core i7). Especially, does anyone know how I could get version 185.18.36 to run on F13?
View 14 Replies
View Related
Jun 16, 2010
I was following this guide to install my nvidia drivers...[URL] but when I got to the step about checking to see if my card is supported I'm to check here...[URL] I don't see my card anywhere in this list So I kept reading and found this posting ... [URL] and it says that it is support under the geforce 200 ... The last time that I installed this driver my X session quit working ... I was able to ssh back into the laptop and undo the driver install so now i'm a little gun shy about trying it again...
View 11 Replies
View Related
Mar 17, 2009
Fedora Core 8 did not recognize my Geforce 7150M display adapter (in a HP DV6000 laptop), neither did Fedora Core 10 I tried yesterday although this laptop is now already over one year old (I have used Vista because it works out of the box but it sucks as you might have guessed). That could be something I'd like to complain about but I choose not to, I simply want to know how to install Fedora 10 from a live CD (that is all I have now, no DVDs and not too much cash to buy some..) Live CD boots and I can access command line. If I have understood correctly, Nvidia proprietary driver supports my display adapter but it is not included in live cd so I could use X after installation. Problem is that I don't know how to successfully run the installer from text mode. I tried to execute 'anaconda' but it cannot find packages to install when it comes to that. There seem to be no instructions how to install from a live CD that I could find using Google. For sure someone knows what command to execute to begin installation?
View 2 Replies
View Related
Dec 2, 2009
I am a recruit for Linux and install FC12 on my PC. The motherboard is ASUS M3N78-CM. The nvidia GeForce 8200 chipset on the motherboard is directlt used for vedio. The driver : NVIDIA-Linux-x86_64-190.42-pkg2.run is downloaded from Nvidia website, but it can't drive the chipset successfully. So i can not start X-window. If anyone has a solution to this problem?
View 3 Replies
View Related
Feb 11, 2010
I've enjoyed accelerated 3d graphics for years with this laptop, but since moving from CentOS 5.3 to FC12 I have had no 3d or opengl working at all.My install seems good. I'm running right now with the 'nvidia' driver in 1920x1200 res with no real problems except the lack of 3d. I have just finished trawling the forums again, coming back to: F12,F11 & F10 Nvidia driver guides [URL] I uninstalled all my nvidia packages, re-installed only "kmod-nvidia xorg-x11-drv-nvidia-libs.i686" and dependencies, ensured 'nvidia' was my selected driver in xorg.conf (using nvidia-config-display disable, then enable), and rebooted, and still no joy. No errors in Xorg.0.log. My 'glx' extension is loaded. 'nouveau' is rdblacklisted. SELinux is disabled. I have 3Gb RAM and so have chosen not to use the PAE kernel or modules.
Code:
[neek@uberneek ~]$ glxinfo
name of display: :0.0
Error: couldn't find RGB GLX visual or fbconfig
[code]....
View 4 Replies
View Related
Nov 12, 2010
My friend just recently gave me an Nvidea Geforce 4 64mb, and it is supposed to be better than my ATI x700 Pro. I was wondering if there was openGL support for this card, and how do i replace it with my ATI card?
View 1 Replies
View Related
Dec 18, 2010
I am running a FC14 x64 on a desktop which has a nvidia GeForce310 aka GT218 card which is being supported by the in kernel nouveau driver.
The kernel/syslog reports:
Code:
When Fedora 14 boots, I can hear the nvidia GPU fan spin up to its max rate.
With Windows on this same machine, the same fan starts at the same rate but drops to a lower (and less noisy rate) so we know there is graphics card supports fan control.
Does anyone know if its possible to set the nvidia's fan speed via the nouveau (or other) driver/util?
I have looked at nvclock (0.8b4 being the most recent I could find) but running this reports that the card isn't supported, although it reportedly supports the NV5x backend.
View 2 Replies
View Related
Jan 15, 2011
I tried to install the driver '01:00.0 VGA compatible controller: nVidia Corporation NV35 [GeForce FX 5900] (rev a1)' watching Fedora Solved → Video Solutions → Installing the Drivers as Provided by nVidia "Installing the Drivers as Provided by nVidia" ,and FedoraForum.org > Fedora Support > But I failed.
Error log*********************************************** ********************
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Sat Jan 15 12:52:09 2011
[code]....
I typed "su -l" and telinit 3. But "ERROR: You appear to be running an X server" is written. What I can install this driver as well? or how I can booting up the Fedora 14 in text mode?
View 5 Replies
View Related
Feb 17, 2011
Is there anything special I need to do to use this card in conjunction with Fedora 14? It's been acting a little strange lately. Also I think the card may have some type of 3D support although I'm not entirely sure on that.
View 1 Replies
View Related
Sep 29, 2010
In Fedora 13 with the kernel version of 2.6.34.7-56.fc13.x86_64, the NVidia driver of the version 256.53 was installed from rpmfusion repository. Everything works fine except for one problem: the brightness cannot be controlled from the power management programs in either KDE or Gnome. In Gnome, the scroll bar of brightness disappears, and, in KDE, the scroll bar cannot be dragged.
Since the computer with Fedora 13 and NVidia driver installed is Dell Studio One 19 (All-in-One computer) which has no hardware buttons to control screen display options at all, there is no other way to adjust the brightness of computer screen. The BIOS of the computer doesn't include an option to adjust screen brightness either. Since screen brightness is set at the maximum level when the computer is turned on, it is not possible to continue using the computer for a continuous period of time due to eyesight protection. Strangely enough, both the Nouveau driver included in xorg-x11-drv-nouveau 0.0.16-8.20100423git13c1043 from Xorg 7.4 and the driver included in the mesa-dri-drivers-experimental 7.8.1 support brightness adjustment without any glitches.
View 4 Replies
View Related
Nov 18, 2010
I used to have FC11 installed with the nvidia supplied binary driver. Worked fine, very stable. Trying FC12 and FC13 live CDs caused a hang, so I stuck with FC11. FC14 live CD did boot so I backed up my own files and did a clean FC14 install. Upgraded to get kernel 2.6.35.6-48, installed the nvidia driver from RPMFusion (260.19.21) and had a working system! Now, after a cold boot, the kernel always hangs during boot. Tried a number of kernel boot option (apci=off, noapic and a few others too). The hang is not always at the same place. The earliest it has hung is after:Disabling lock debugging due to kernel taint
Sometimes its a few lines later at:NVRM: loading NVIDIA UNIX x86_64 Kernel Module 260.19.12 ...(which would seem to imply that the hang can even occur a step or two before the actual driver is loaded!)
Sometimes it keeps going for a few more seconds and randomly hangs during some other driver load.
Without a specific nvidia driver the system always boots ok, so I'm pretty sure its the nvidia driver but I just can't seem to get a handle on this in a reproducible way. Sometimes, when I have make some other change, it will boot and work ok, but a reboot locks it up again (for example, in case it was SELinux, I disabled it and on the next reboot it booted and worked ok. Then, next boot, it wasn't working again). When I make changes, I reboot using the previous kernel, make the changes and reboot, with an occasional success. Once I start rebooting using the latest kernel, it always hangs.
I'd love to get a solution to this, but even some advice on debugging this would be appreciated!
I'm using 8600GT, 256Mb, PCIe card in a MA69VM motherboard with 3Gb of RAM.
View 2 Replies
View Related
Feb 16, 2010
I have installed kmod-nvidia-173xx and done everything your guide says [URL], but after reboot I get a flashing _ . What can I do? nVidia has always been a pain to me on my obsolete graphics card.
View 14 Replies
View Related
Sep 9, 2010
I am just getting into fedora and have installed it on an EMachine ET 1810. According to my SMOLT info, I have the above Video card. (my smolt info is in my signature). I had installed a couple of games that require 3d drivers in order for the game to play! but I can't find any.
View 3 Replies
View Related
Jan 16, 2010
i have a lenovo g550 with nvidia geforce g 105m i tried to install its driver on fedora 11 and 12 and i have followed the instructions of setup as in fedora sites and forums, the problem is after installation i have 6 equal screens 640*320 and i don't know how to edit xorg.conf
View 4 Replies
View Related
Apr 3, 2011
I own an ASUS N61JV-X2 notebook PC that has an Intel HD IGP, nVIDIA GeForce GT 325M GPU, and nVIDIA Optimus technology. I am running OpenSUSE 11.4 64 bit with GNOME. I used to be a former Ubuntu user. I used Ubuntu 10.10 Maverick Meerkat 64 bit. In Ubuntu, it was not recommended that I install the proprietary nVIDIA binary drivers because it would cause me to log into a TTY console upon reboot.
nVIDIA states that they have no plans to support Optimus technology in Linux at any time. Would it be recommended that I install the proprietary nVIDIA binary drivers in OpenSUSE 11.4 64 bit with GNOME? Will I get the same problem as in Ubuntu? How do I do this?
View 1 Replies
View Related
Jul 12, 2011
I've been having some problems and was trying to diagnose them. My graphics were going wonky at the BIOS stage (spots, letters changing colour, and even the very first screen of nVidia details swapping "version" for "versikn") so I went to try a new graphics card. Not long before I got my new graphics card, Gnome 3 really started playing up and did the "oops, a problem occurred" at every login. I created a new account and got the same behaviour. I swapped my GeForce 7950 out for a GeForce 7300 that I scrounged up. The spots and changing letters disappeared, so I knew that at least part of the issue was the graphics and not something else (e.g. motherboard or memory). I still got the "Ooops" screen, so I knew that wasn't caused by a bad response from the graphics card or anything.
I've since nuked the install (which started out as 11.4 RC1 with GNOME3:STABLE) and re-installed from a new download of the 11.4 DVD plus GNOME3:STABLE (in accordance with these instructions) with all of the updates. I can now log in without the "Ooops", but if I am using the proprietary nVidia drivers then the display won't repaint after a few seconds (long enough for Gnome Do to appear, but not long long enough for me to do anything else) - clicking on Activities or on the menu in the top-right doesn't seem to do anything. If I Ctrl+Alt+F1 then Ctrl+Alt+F7 to skip to a terminal and back then the cursor is still there, but the screen is blank.
If I swap to the Nouveau drivers then I can log in to Gnome Shell and it continues to render, but even simple things like dialogs folding down from the top of their parent window can grind along and take a few seconds to finish painting. That is on the 7300 rather than the 7950, but I haven't swapped the cards back as I'm still suspicious of how healthy the 7950 is. I've not seen anything that appears relevant in the XOrg log, but given that X will reboot and isn't completely hung then it could be a repaint bug more than an error. I've tried all of this with clean accounts with the same results, so it wouldn't seem to be any of the standard .gconf/.dconf etc folders.
View 2 Replies
View Related
Nov 13, 2010
I just installed GS following the instructions here:[URL]... and the classic way of getting GS to start at login (adding gnome-shell --replace in start up applications) doesnt work.
To start GS now we have to use the command "~/gnome-shell/source/gnome-shell/src/gnome-shell --replace" via the terminal adding that to start up doesnt work either, does anyone know how to get GS to start at login?
View 6 Replies
View Related
Mar 3, 2011
I've seen lots of posts all over the Internet that advise users to check the "Run command as a login shell" checkbox in GNOME Terminal under Edit->Profile Preferences->Title and Command.
This makes gnome-terminal run bash/csh/tcsh/ksh as a login shell, which it does not do by default. In turn, running gnome-terminal as a login shell sources the system and user login scripts. This sets up things like colored ls etc.
It seems like gnome-terminal should be a login shell by default. Why isn't it? I've never seen a good explanation of why gnome-terminal isn't a login shell. The "Run command as a login shell" checkbox must be unchecked by default for some good reason, right?
View 1 Replies
View Related
Feb 3, 2011
I just bought an LG E2250V Monitor that I'm connecting to my laptop with the VGA port, my laptop is equipped with the cardCode:01:00.0 VGA compatible controller: nVidia Corporation G96 [GeForce 9600M GT] (rev a1)However nvidia-setting is able to detect resolution only up to 1024x768, I can't get higher than that, and it doesn't even display the monitors name.Information:
Operating System: Linux 2.6.35.10-74.fc14.x86_64
NVIDIA Driver Version: 260.19.29
Server Version Number: 11.0
[code]....
View 4 Replies
View Related
Mar 14, 2011
I installed 11.3 last week and eventually got nvidia drivers working. I was quite happy how most things were progressing, then the temptation to upgrade to 11.4 got too much I upgraded today (online, not dvd) and everything went well. On rebooting the desktop came up as normal and all was good. I installed nvidia and got that working ok. I then installed Gnome-Shell and couldn't figure out how to get it working. I've been using Fedora recently and the Gnome-Shell option is available at Login. I then discovered the gnome-shell --replace terminal command and I tried it. It seemed to load ok, but as I had used the terminal, when I closed the terminal it seems like compiz crashed. I lost all windows borders and nothing was usable. I REISUB'd and started again. On reboot I got a CLI login prompt. After logging in I tried startx, to no avail. I then tried gdm start and got to the desktop again (not gnome-shell). I Alt+F2'd and ran gnome-shell --replace again and all was good - except no network I rebooted again, and got the CLI again. Went through it all again and tried to configure network (wireless) no good. I then connected an ethernet cable and tried again. That worked, but I'm not sure why - I didn't think anything was downloaded. Anyway wireless now works ok - even on reboot. However I'm still getting dumped to the CLI login on restarts.
View 9 Replies
View Related
Feb 11, 2009
There I had legacy driver from nVidia but resolution was degraded to 640x320 and in their version 8.10 I cannot edit xorg.config (there was not anythig about resolution) I hoped in fedora i`ll fix this.
View 6 Replies
View Related
Aug 11, 2010
When trying to install Fedora 13 64 bit, I get no X windows but do get text.Video is nVidia Geforce GT 8 360M with 1gb vram. the Live DVD I get a checker board display.
View 7 Replies
View Related
May 13, 2010
First off, let me say: I'm a long time Linux hobbyist and recently installed Fedora 12. I've been looking (some say "lurking") around these forums for a bit after I loaded it up and let me say: Leigh, You're an amazing young man! Keep up the great work! I've a question: I've just put together a hobby computer: Pentuim 4, with 1 Gig of RAM and a Nvidia Geforce5700LE. When I install Fedora from a fresh install, everything works great: nice screen resolution, good graphics, etc. but no 3d or acceleration, so I'm very limited on my programs.
So I decided I need to upgrade my Nvidia driver. I followed Leigh's Nvidia setup guide after installing Fedora 12 (all four steps!) everything seemed to go fine, but when I reboot, I quickly see the Nvidia splash screen, but the screen then goes blank. Well, not really blank, I can see what appears to be a kind of cross-hatch pattern, plus I can see what should be my mouse cursor on screen (it also is a square shaped pattern). I suspect it may be at a screen resolution that my monitor doesn't support. Once there, the computer pretty much doesn't do anything else. Usually I can break into the x driver loading and go to the command prompt, but this latest time I can't even do that.
View 10 Replies
View Related
Dec 5, 2009
I have a Compaq Presario 8000 with an Nvidia Geforce FX 5950 Ultra on which a year ago I upgraded from Fedora 6 to Fedora 9, and this broke the Nvidia driver, since Fedora 9 was shipped with an X server incompatible with Nvidia. I went back to the 2d driver to get X working, and it sat that way for the past year. But recently I wanted to do some 3D work and decided to install Fedora 12, which hopefully has an X server that works with Nvidia.
I decided to do a cold install, re-partitioning my 80G hard drive at the same time. I backed up my data, ran the install CDs with no errors, and booted the system, with an immediate kernel panic: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
Doing a Google search, I found over 8,000 hits for that message combined with the keyword Fedora. Several of the hits were on Bugzilla: [URL] I then booted the install disk, chose rescue mode and did - chroot /mnt/sysimage
[Code]....
View 7 Replies
View Related
Jun 3, 2011
yesterday I updated my fedora 13 to fedora 14 (on laptop) and today i cannot log in on user. It just go blank for a sec and is back to login.
At text console (alt+ctr+f2/f3) i enter my username and pass it give this for a sec and resets (clean) console
username: Name
password:
last used: [date]
login: no shell permission denied
i used unetbootin (fedora 14 netinstall to update) and later i updated 1,5G before reboot (did update that fix, forgot its name tho :s)
I would most likely reinstall everything, but i have some work at laptop and as death-line is near, i would prefer to fix it if possible.
edited:
i have installed F13 on unused space, is there a way for me to access and fix it? or at least get some files from there?
View 1 Replies
View Related