Debian Configuration :: Nvidia Driver Resolution Setting Not Working
Jun 5, 2011
I have installed the Nvidia drivers on my desktop using [URL] according to the Debian way. Everything seems to be fine except the resolution. The best it will let me choose is something like 600x480. I have searched and most of what is suggested around the web is to change xorg.conf. I have tried this using different setting suggested but nothing is working. I did not have a xorg.conf file so I created one with the setting suggested on the Debian wiki.
View 12 Replies
ADVERTISEMENT
Dec 21, 2010
I need to set my resolution to 1280x1024. Problem is, that the NVIDIA X Server Settings does not display such a resolution and I want to use that! My monitor is an LCD capable of upto 1280x1024 75HZ resolution. I'm using Ubuntu 10.10. I did the xrandr command to check what resolutions are available and its output was:
Failed to get size of gamma for output default
Screen 0: minimum 320 x 240, current 1024 x 768, maximum 1024 x 768
default connected 1024x768+0+0 0mm x 0mm
1024x768 50.0 60.0*
800x600 51.0 52.0 53.0
680x384 54.0 55.0
640x480 56.0
512x384 57.0
400x300 58.0
320x240 59.0
In NVIDIA X Server Settings, the list of available resolutions are:
(all of the above)
1152x864
1360x768
I have NVIDIA GeForce 9500GT.
View 9 Replies
View Related
May 30, 2010
Just installed Ubuntu, have no idea what I'm doing. This message appears and don't know how to do it. "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server."
View 2 Replies
View Related
Dec 18, 2010
The nouvea drivers work with some xrandr magic, but the closed-source drivers won't. They fail to detect a possible resolution over 640x480. My monitor has a native resolution of 1440x900 @ 60hz. I've tried to modify my xorg.conf, but to no avail. I installed the latest nvidia drivers from the site instead of the repo drivers, version: 260.19.29, this is my xorg.conf, basically a standard xorg file:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 260.19.29 (buildmeister@swio-display-x86-rhel47-04.nvidia.com) Wed Dec 8 12:27:39 PST 2010
Section "ServerLayout"
[code]....
View 4 Replies
View Related
Jan 20, 2011
hHey i recently installed Debian Squeeze 64bit over my Ubuntu & Windows, i got everything installed and running including all programs i need without a single problem The one thing i havent been able to do yet is install the Nvidia Driver for Geforce 8800gt, ive searched a few sites but one site is telling you to do this way and the the is telling you to do it another way then people are saying about having errors when xorg updates and stuff.
So i was wanting to know whats the easiest and best way to install the Nvidia Driver package (from nvidia website) onto Squeeze 64bit, i've done it on lenny but cant remember ow
If i get this working then il probaly use Debian as my main OS from now on.
View 14 Replies
View Related
Apr 8, 2011
I have install squeeze, wheezy. I understand there a glitch in nvidia-setting. So how can I change screen resolution and refresh rate in xorg.conf?
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (pbuilder@windlord) Sun Jun 13 06:03:17 UTC 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection .....
View 4 Replies
View Related
Sep 4, 2015
i've installed debian 8 on this laptop but can't use the nvidia card from nvidia-detect can't find the card but it work 'cause i can see it in the list of hardware, 3d controller the driver from nvidia don't work, and i had a problem with force installation and xorg.conf file.. how i can make it work ? the card it's nvidia 820m
View 3 Replies
View Related
Jun 7, 2010
I recently installed Squeeze. I had sound with the video driver that came with the install. Then I installed the Nvidia driver from Nvidia website. The sound dissappeared. When I uninstalled the Nvidia driver and removed xorg.conf and rebooted again, the sound came back. Then I installed the Nvidia driver from (nvidia-glx, dev and settings) from Debian with Synaptic. The sound went away again. If I uninstall the nvidia driver and xorg.conf the sound will probably come back again. The sound driver is the one that came with the install.
The volumes are unmuted in the alsamixer. Somehow alsaconf command does not work.
My mother board is a ASUS M4N78 Pro with Nvidia IGP.
What can I do to have sound with the nvidia driver?
View 14 Replies
View Related
Apr 2, 2010
I follow a french tutorial to install the nvidia pilots. So, i did :
$ su
# apt-get install module-assistant
# m-a prepare
# m-a clean nvidia-kernel
# m-a a-i -i nvidia-kernel-source
[Code]....
View 6 Replies
View Related
May 10, 2011
I'm encountering a problem running X and Gnome from a Xen-enabled Kernel with NVIDIA Binary driver compiled with IGNORE_XEN_PRESENCE=y on debian squeeze
Hardware:
NVIDIA NVS 5100M
Kernel:
Debian Squeeze : 2.6.32-5-xen-amd64
NVIDIA Kernel from the official package
Boot and module loading are successful, but when X starts, I only get a black screen. I attached here my Xorg.0.log, however it doesn't seems to have any problem.
View 5 Replies
View Related
Jul 14, 2011
I get plymouth and install it success, but it only support nouveau(nvidia) mode.
When I update my driver with [URL] , plymouth gone.
Is there any other way to do boot-image with the driver from [URL] ?
I find super-image-manager(buc), but I can not install it.
Addition: What is buc ?
View 3 Replies
View Related
Jul 30, 2011
I've posted here before (viewtopic.php?f=5&t=66322) about problems arising from my attempts to get an nVidia driver to work with my custom kernel. Now those problems are all fixed, and I'm back to where I was: the built kernel boots fine, but the nVidia driver fails.
The custom kernel is as near to the stock one as I can make it, I'm just trying to find a working build process at present, before trying to build a later-version kernel.
I used sgfxi with "-! 40" to build the nVidia driver for my custom kernel; it reported that everything was fine.
With stock kernel - 2.6.32-5-amd64 ...
Extracts from /var/log/Xorg.0.log:
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
code....
View 6 Replies
View Related
Aug 17, 2011
After I've installed nvidia-vdpau-driver 280.13-1 from debian testing repositories, all the colors on the screen became too bright, except dark colors.
I've tried to change the values from Brightness, Contrast and Gamma, in NVIDIA X Server Settings -> X Server Color Correction, but it doesn't bring everything back to normal.
Either the nvidia driver has problems, or I don't know how to calibrate. But before I installed nvidia-vdpau-driver, I had the nouveau display driver (experimental), and all colors were displayed normally, the same as in Windows 7 and XP.
View 1 Replies
View Related
Apr 28, 2010
I revived my old desktop (failed psu), and installed debian squeeze using netinst. It has a nvidia geForce 7600GT card. The driver in squeeze does not work very well, so I downloaded nvidia driver-installer. When I run it, it comes back with an error saying the kernel (I assume the nvidia graphics kernel) is compiled with gcc4.3, but the system is using gcc4.4. Using synaptic manager, I installed gcc3.3, but same error.
Next I tried to uninstall gcc4.4 and it gave a warning the system might not be usable. I did not understand it, but I went ahead and uninstalled gcc4.4 and guess what, the system is not usable, and I have to re-install squeeze. Not a big loss, since I do not have much in it. How to install this nvidia driver, specifically, how do I get switch to gcc4.3 from gcc4.3? Also, the squeeze install gave me 2.6.33-trunk-amd64, and 2.6.33-3-amd64. How do I get rid of ...trunk-amd64? Do I just delete it from grub?
View 10 Replies
View Related
May 19, 2010
I've built a new kernel (2.6.34) on our workstation at work. It boots and runs beautifully, but there is one minor problem. I created the kernel as a Debian package along with the kernel headers. Upon installing both and attempting to build the nVidia driver for said kernel, the installer tells me that it cannot determine the version and quits. This happens even if I manually specify the path to the headers. What's going on here, did I miss something during my compilation of the new kernel?
View 14 Replies
View Related
Dec 17, 2010
I'm running succesfully Debian 6.0 after first trying Debian 5.0 and ran into missing partitions. This is solved by using Debian 6.0 (Beta 2).
Now it's NVidia's turn: Under Ubuntu (yes...i know it by now...) you had to install a proprietary driver for NVidia to ensure that 3D was supported. What about Debian? There's nothing like this under Debian? How do i know if 3D is supported?
View 14 Replies
View Related
Mar 23, 2011
I have 64bit debian 6 squeeze installed on my 64bit pc. I have an NVIDIA gpu which I have installed the drivers for and they work just fine. I also have a 32 bit chroot located at /32 which was created using debootstrap. The NVIDIA 64bit driver gives the option to install compatability driver libraries into the 32bit chroot. Whenever I run any application that uses opengl rendering within the chroot, they segfault. When I uninstalled and reinstalled the NVIDIA driver without installing the libraries to the chroot, and instead replaced them with mesa gl libraries, the programs complain about framebuffer missing. They do not segfault, and some programs that can use sdl instead will work fine. I have xhost + set to allow any programs in the chroot to use the host's xorg. I have the host's proc mounted to the chroot proc directory, and i also have dev mount --bind 'ed to the chroot.
View 11 Replies
View Related
May 17, 2010
Using squeeze with a GeForce4 MX 440 video card (NVIDIA) I have a monitor (4/3 aspect ratio, 1024x768 usually), and a TV connected via S-video After installing the NVIDIA driver using the NVIDIA binaries I managed to have a cloned twin screen configuration working.
However, the monitor is (wrongly) detected as having size 1824x768 (aspect ratio is widescreen) Using system monitor, I can set the correct size, but only for one session; besides, the login screen too is messed up the xorg.conf file seems right: proper resolution modes are set; xorg.0.log too
View 2 Replies
View Related
Mar 15, 2010
I have a Dell XPS M1330, which has a GeForce 8400M GS GPU. The binary (sigh) nVidia driver installed is version 190.53 (installed by sgfxi). This is working well: glxgears gives me about 2600 FPS and compiz is happy.An old Philips 170B is attached by VGA cable. I was looking to set up a method of switching resolution upon connecting to the monitor when working at the desk, since I don't like the 1280x800 resolution of the laptop.
nfortunately, I can't get any output on the external monitor. It does work under Ubuntu, which installed the 180 series binary driver. (Going to an earlier driver is an option, but I want to understand the problem.) Bottom line, I want to work under Debian.As far as I know, nVidia's proprietary driver doesn't support xrandr. At any rate, with he external 170B monitor attached and turned on, I get the following:$ xrandr -qScreen 0: minimum 320 x 175, current 1280 x 800, maximum 1280 x 800default connected 1280x800+0+0 0mm x 0mm
1280x800 50.0*
1024x768 51.0 52.0
960x540 53.0
[code]...
View 2 Replies
View Related
Dec 6, 2010
I have what I think is a pretty eay question. I'm trying to set the screen resolution of my new 10.10 installation to 1920x1080. The monitor only supports up to 1024x768, but i would like more area. I've done this before but I forgot how i did it. In the end the screen spilled off to the sides and when I ran my cursor over to that section it would disply it. I have a feeling that i need to edit my xorg.conf file, but my nvidia drive has some new mode types and i figured I'd ask before making random changes.
below is my xorg.conf file.
UTC 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
[Code]...
View 2 Replies
View Related
Mar 21, 2010
i need drivers for monitor 17' adi nh 776 for linux bt4.because i cant change resolution at nvidia xserver setting...
View 6 Replies
View Related
Apr 5, 2011
My GNOME system stopped using the proprietary NVIDIA drivers after the recent dist-upgrade to v6.0.1. It was working perferctly before that.
My inxi output:
inxi -F
System: Host thirra-ws1 Kernel 2.6.32-5-686 i686 (32 bit) Distro Debian GNU/Linux squeeze/sid
CPU: Dual core Intel Core2 Duo E7500 (SMP) cache 3072 KB flags (sse3 nx lm vmx) bmips 11703.9
[Code].....
When I tried to configure the screen resolution using NVIDIA X server settings, I was told to run 'nvidia-xconfig'. I ran it, restarted X but my resolution is still stuck at the maximum of 1024x768. I've tried running the above many times with the same results. I even tried aptitude reinstalling but still the same.
View 11 Replies
View Related
Jun 11, 2010
Ubuntu 10.04, nVidia GeForce 9400, driver ver 195.36.15.When I log in, the system always comes up in 800x600 mode. I went into the NVIDIA X Server Settings page and changed it to my preferred setting of 1152x864. I hit Apply, then Save to X Configuration File (with correct root password).All is well until restarting. Then it reverts back. The update doesn't stick. How can I make this the permenant setting?
View 3 Replies
View Related
Feb 1, 2010
i got nvidia 6150se nforce 430 i install it's drivers from the hardware drivers but the max resolution it gets its 1360x768 which are not enough what should i do to fix it?
View 8 Replies
View Related
Mar 15, 2010
I'm trying to install the nvidia drivers but it is not working.
lspci | grep VGA
02:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX - nForce GPU] (rev a3)
My xorg.conf looks like this:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
[code]...
And after that my X is not working. And when i try sudo modprobe nvidia I get this:
FATAL: Error inserting nvidia (/lib/modules/2.6.26-2-686/nvidia/nvidia.ko): No such device
View 2 Replies
View Related
Jun 30, 2010
My monitor's dvi jack is damaged so my nvidia geforce 210 does not recognise the supported resolutions correctly.
result: while it actually can support upto 1440x900, the highest available resolution is 1360x768.
While on windows, i used the nvidia utility to add the custom resolution and everything was nice.
On ubuntu 10.04, i haven't found a way to do that yet. yes, i searched forums, tried a couple of things with the xorg.conf file and lxrandr, etc. but to no avail.
I did manage to get the resolution listed in ubuntu's own display manager, and it shows 1440x900, but it doesn't apply when i hit 'apply'.
The nvidia settings manager does not show the resolution.
View 2 Replies
View Related
Aug 1, 2010
My native resolution is 1366x768.
View 8 Replies
View Related
Nov 15, 2010
I am running Fedora 14 on a Dell Lat D630 laptop.
When originally installing my resolution was a perfect 1440x900.
I then installed the Nvidia drivers with:
YUM install kmod-nvidia
This worked fine, I tried out Super Tux 2 to test it and I do indeed have 3D acceleration now. The only problem is my resolution has gone way down. The Nvidia software states its still 1440x900 but it definitely is not... And my monitor is down as (Not in front of it right now so can�t remember exactly) Generic or not detected... Is that what's causing the issue?
So to summarize, I have 3D hardware acceleration, the appropriate Nvidia drivers, it's just my resolution and the fact the Nvidia software is lying about it...
View 2 Replies
View Related
Apr 19, 2010
New pooter, just installed SuSE 11.1. Would appreciate some insight into which Nvidia driver is right for my system, and what is the maximum resolution I can use without potentially causing any damage (if that's even a real concern).Here are the specifics.
[Code]...
So, now the questions.
a) Should I leave both sets of drivers installed, or should I delete one of them?
b) If delete, which should be taken off?
c) If neither of these drivers is the right one, which do you suggest I get instead?
d) I currently have the resolution set at 1920X1440. Is there any reason to worry that I might be overdriving anything and potentially causing damage to the system?
View 9 Replies
View Related
Jan 27, 2010
Since I upgraded to 9.04 a while back I have had this annoying screen resolution issue. Every time I log into my Ubuntu system the screen resolution defaults to 1280x1024. My preferred desktop resolution is normally set at 1680x1050. So each time I log in I have to open the Nvidia control panel and manually set the screen resolution to 1680x1050. Even after logging out it will still go right back to 1280x1024 when I log back in.
But the funny this is I am almost positive the login screen resolution is 1680x1050 because the picture is crisp unlike the blurry and distorted picture at 1028x1024. I have tried everything from manually editing the x.org conf file to running the Nvidia control panel as root. Nothing saves my preferred resolution of 1680x1050. My Nvidia driver is version 190.42 and Ubuntu version is 9.04. The monitor is an ASUS VW192T+ which is detected by the Nvidia driver.
View 2 Replies
View Related
