I can't select default refreshing rate and resolution of my screen. Believe me, 50 Hz hurts eyes and causes headache. Ubuntu doesn't recognize my screen I used to work on 1280x1024 resolution with 80 Hz refreshing rate. 1152x864 60Hz is max I can select in Nvidia X Server and Ubuntu Screen Properties. I have tried changing options in Nvidia X Server, Ubuntu Screen Properties and tried xrandr commands (these ended with xrandr: Failed to get size of gamma for output default. or Can't open display).
# nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 270.29 (buildd@allspice) Fri Feb 25 14:42:07 UTC 2011 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection .....
Btw, I'm using Ubuntu 11.04. My graphic card is GeForce 430 GT, screen - Acer AL1916.
Some month ago I installed openSUSE 11.1. It worked not bad, but I wanted to get the newes release of Firefox. So I did an upgrade to 11.2. Yast2 refused to work with an error message: unknown option -s (or similar). The regular updates didn't work also. Then I decided to do a new installation. Now I'm having a new problem: Display settings (Anzeige-Einstellungen) reports: Monitor unknown (Monitor unbekannt).
Possible resolution settings are: 800 x 600; 640 x 480; 400 x 300; 320 x 240; Possible refresh rates are: 60 Hz or 56 Hz @ 800 x 600 I need 1024 x 768 @ 76 Hz. In the previous installation it worked well. How I can teach openSUSE to run 1024 x 768 @ 76 Hz?
YAST2 Hardware information shows me in Monitor > Monitor > Resources > Resolution: High: 768; Vertical frequency: 76; Wide: 1024 The VGA controller is also correct shown in Display > 3d Blaster Savage 4
I am having trouble setting my refresh rate higher than 85 hz. Any Way to get it to 100 hz?
Tried so far: - a lot of googling - added a modeline to xorg.conf - reinstalled nvidia driver - tried the screen on a windows desktop, this worked so the monitor is fine
Specs: onitor: Iiyama Vision master pro 510 (should be capable of doing 104 hz at 1600 x 1200, max resolution 2048 x 1536) graphics card: Geforce 9800gt motherboard: p5ql-e Os: Fedora 13
The modeline I tried, tried it both in screen section as well as in a seperate "Modes" section: Code: Modeline "1600x1200_100.00" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync After restarting X the screen only does 1024x768 max because of the modeline
xorg.conf: Code: # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 256.35 (buildmeister@builder97.nvidia.com) Wed Jun 16 19:15:05 PDT 2010 # Xorg configuration created by livna-config-display
I have three monitors, two Dells and an older LG all native at 1920x1080@60Hz and only recently installed Debian on this setup.
The LG is detected as running at 59.93Hz instead of 60Hz and this discrepancy appears to drive up the temperatures in my GPU constantly, even on idle, and introduces severe stuttering in any kind of graphical application.
I had the exact same issue with Windows 7 as well, but was able to fix it by changing the display settings of said monitor to 60Hz refresh, thereby returning the idle temps to normal and removing the stuttering.
My problem now is that I can't seem to change the refresh rate of this screen at all under debian.
xrandr -q returns that the monitor is running at 59.93Hz, but also shows 60Hz as available. xrandr --output DVI-I-1 --rate 60 appears to have absolutely no effect, it doesn't error but it also doesn't change the refresh rate.
Trying to add a new mode with 60hz and modeline obtained from cvt results in the following:
Code: Select allxrandr --newmode "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync xrandr --addmode DVI-I-1 "1920x1080_60.00"X Error of failed request:Â BadMatch (invalid parameter attributes) Major opcode of failed request:Â 140 (RANDR) Minor opcode of failed request:Â 18 (RRAddOutputMode) Serial number of failed request:Â 41 Current serial number in output stream:Â 42
I've also tried to set the refresh rate through the proprietary nvidia driver and manually through xorg.conf, both to no effect;
Here's my current xorg.conf:
Code: Select allSection "ServerLayout"   Identifier   "Layout0"   Screen   0 "Screen0" 0 0   InputDevice  "Keyboard0" "CoreKeyboard"   InputDevice  "Mouse0" "CorePointer"   Option     "Xinerama" "0" EndSection
[Code] ....
The driver settings will show 60Hz but the listing for the monitor in the driver and xrandr will still show 59.93Hz. Saving the settings of nvidia-settings to .nvidia-settings-rc was equally fruitless.
The settings on the monitor itself also show it running at 60Hz, without an option to go down to 59.93Hz so I got no clue where that is even coming from.
What else to try, besides buying a new monitor, which I'm not quite prepared to do yet.
Is there any way to change the resolution and refresh rate of the graphical log on screen in Lenny? I have the right resolution and refresh rates set for after I log in but I don't know which file to edit to make Lenny use the right settings for the log on screen.
I just installed Ubuntu 9.10 I have ATi HD5700 and its Catalyst drivers downloaded from http://ati.amd.com
The monitor is Hanns-G HH251 (25", 1920x1080@60 max) I cannot make either "Display Settings" or "ATI Configuration" to show the refresh rate of 60 Hz as available. When I change the resolution to 1440x900 then I can pick 60 (but obviously I don't want that resolution). However, if I pick 1920x1080, the only two refresh rates available are 25 and 30 Hz, causing the image to flicker and whatnot.
Iam facing difficulty with smaller text size in the latest release 10.10(owing to default Screen Resolution of 1440X900{16:10}).
Surprisingly, Iam not able to choose any other 'Resolution' & 'Refresh Rate'from the corresponding drop-down menus!?(Click on the drop-downs do not provoke any action!?)
Default 'Refresh Rate' is also set to 0Hz.'Rotation' as well is fixed to NORMAL only?
every since I installed natty in march my refresh rate has been wrong this makes it where I can not see the boot screen, this was not a big problem until I installed the developmental version of ubuntu to test for bugs and I can not see the boot screen, I went to the page that tells how to change the rate but I get this error when I ran xrandr Failed to get size of gamma for output default. This showing my monitor as default it does not show a name, I manually set it up in x server and it shows the correct rate and the correct monitor, but not in monitor preferences.
I cannot get my desired resolution and refresh rate in Ubuntu (10.04, Lucid). I want to run at the best my poor monitor can, which in Windows (XP through 7) is 1152*864 with a refresh rate of 72Hz.
I want these setting in Ubuntu, and many grey hairs have been produced in trying to make it happen. I can get the correct resolution, but not the refresh rate.
I'm using the proprietary Nvidia drivers, which are up to date.
System info:
I have a CRT Monitor connected to a laptop via the VGA connector. The monitor is a 16" AOC brand (this is all I know, and for all my efforts I cannot find the manual for it from just this information). The graphics card is a GeForce 9600M GS
Things I've tried:
Using the regular default drivers Editing Xorg.conf in all manner of ways (seems to always be ignored upon reboot. I don't get that). 3 days of googling Asking at the Ubuntu forums.
How can I do this, if I can?
how all of this works, how xorg.conf and the Nvidia program interact and such.
Is it possible to have gnome's display settings recognise higher refresh rates than 56hz, as my nvidia is set to 85hz, but gnome display still thinks its 56hz, and I believe this is causing many programs I'm using to refresh at 56hz. Compiz works beautifully after overriding the refresh rate inside it, as it too thought I was using 56hz instead of 85 but many games aswell as CairoDock as jerky, which makes me think it is a refresh issue.
I'm trying to use an external monitor to watch movies on my linux box (kubuntu maverick) but it results always out of sync. TV-out refresh rate is locked as you can see on the image i've attached right here. This is the output of the nvidia-settings query about the variable RefreshRate:
Code: Attribute 'RefreshRate' (DeepBlue:0.0; display device: CRT-0): 60.02 Hz. 'RefreshRate' is an integer attribute. 'RefreshRate' is a read-only attribute. 'RefreshRate' is display device specific.
i am still new with linux and debian i have some issues setting up a correct refresh rate on my monitor i want a 75hz or 80hz however i can only get 60hz a also get some weird frequencies like 59 , 61hz on the screen resolution tool via the gnome dockbar here is my xorg.conf
# xorg.conf (X.Org X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database.
The screen resolution defaulted to 1024 x 768 with a refresh rate of 60hz.
As this made the screen too flickery I changed the refresh rate to 87hz.
This improved the ficker but had some side effects. Firstly the computer now 'thinks' that my monitor is bigger than it really is. For example a maximised application is now off the screen. I have to manually resize the applications to fit the screen. The virtual desktop in the bottom right hand corner is now off the screen, as is the clock on the top right hand corner.
The other side effect is that I now have problems logging on to my computer. It now takes several attempts to log onto my computer.
I'm currently running an up-to-date copy of Ubuntu 11.04, but I'm noticing some strange behavior with the monitor settings. First of all, I started investigating this because I'm seeing a lot of screen tearing while watching videos full screen as well as while the screensaver (lattice) is running. On Ubuntu 10.10 I was able to simply set the refresh rate of my monitor to 60Hz through the Nvidia tool and everything worked great. Now, this is no longer the case. I'm using a Samsung Syncmaster 205BW monitor with an Nvidia 8600 GT video card. They are connected with a DVI cable.The strange thing is, the default tool, Monitors, claims my monitor is "unknown" and will only allow me to select 50Hz, 51Hz, and sometimes 52Hz for the refresh rate.
The Nvidia tool claims that my monitor has been detected as a Samsung Syncmaster and is configured to run at 60Hz.However, another area of the Nvidia tool claims that my monitor is using a refresh rate of 59.95Hz. none of these solutions had any effect. I'm still seeing video tearing. I let the Nvidia tool re-write my xorg.conf file after trying these solutions.
I just upgraded from a 1280x1024 17" to a 1920x1200 24".However, at 1920x1200, I do not have an option to change the refresh rate to anything but 60Hz, but Id like to run 70 or 75Hz.My monitor is an Asus PA246Q. Digital Signal Frequency : 30~83 KHz(H)/ 50~76 Hz(V).I am running Debian 6.Video card is an ATI Radeon 4850/1GB, and I am using the fglrx driver.
I just got a CRT monitor today, used of course, and plugged it in, pleased with many things. However, the screen is blinking subtly as a result of low refresh rate. This monitor is supposed to be 1024x768 @87 hz and 1280x1024 @66hz (here are the specs [URL]. I only get the following from Xrandr:
Code: Select allfoo@debian:~$ xrandr Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096 VGA1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm   1024x768    60.0*   800x600    60.3   56.2   848x480    60.0   640x480    59.9
Is there anyway I can get my desired resolution? I can't find the xorg.config which I read about.
I have installed the Nvidia drivers on my desktop using [URL] according to the Debian way. Everything seems to be fine except the resolution. The best it will let me choose is something like 600x480. I have searched and most of what is suggested around the web is to change xorg.conf. I have tried this using different setting suggested but nothing is working. I did not have a xorg.conf file so I created one with the setting suggested on the Debian wiki.
I am having problems with the refresh rate if the screen. In the refresh mode of the monitor in the monitor options have only one option 60Hz. I have LG 24 + ATI Radon 3870, and have already installed the ATI driver via Ubuntu download center.
I'm running Debian squeeze on an old IBM laptop with Radeon Mobility 7500 graphic card.In the kernel 2.6.32-5 there is always a little white line at the bottom of the screen.It begins to appear after the font size changes during the boot process.It does not appear in older kernels.
What it does is, if you do something to change anything on the screen, for example, highlighting text, or switching from one tab/menu in an application to another. The screen doesn't show the change. The only way to SEE the change is to do something else to the screen, like grabbing and moving the application around, or scrolling the page of a website, etc. If you don't do that, you won't see what's really on the screen, but rather what WAS on the screen.
Another example:
*) say you have an application open with 3 tabs: tab1, tab2, and tab3. *) Switch from tab1 to tab2 and you see no change on the screen. *) Switch from tab2 to tab3 and you see tab 2 on the screen, NOT tab 3. *) Switch from tab3 to tab 2 and you see tab3 on the screen, and NOT tab2.
Or, if you're typing in this box to make a post, and you hit ctrl+a to select all, you see no change. If you click in the box to deselect all, then it looks like you've selected all text still. The only way to see what's currently on the screen is to scroll the text box or page just a bit, or, if you're using an application, then you'd have to move it around on the screen a bit.
As i've said, the nVidia drivers are installed and working, as well as compiz, etc.
Code: [=v=]$ lspci 00:00.0 Host bridge: ATI Technologies Inc RD890 Northbridge only single slot PCI-e GFX Hydra part (rev 02) 00:02.0 PCI bridge: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port B)
[Code]....
Also, i did BOTH the dracut thing, and the extra kernel paramter in the grub.conf. So, nouveau is blacklisted. Oddly enough though, i do NOT have this problem when using the nouveau driver...
Also, fwiw, i think that i should mention that i'm not using the "Desktop Settings > Enable Desktop Effects" method, because i always seem to have problems with getting certain features to work, like the background for the cube skydome, etc. How i do it is that i install a package called compiz-manager, and i have it set to run at session start. This makes all of the compiz features work fine. One thing that i've noticed though, is that on my other workstation, i haven't set that up yet, and it seems that is is NOT having the same issue. While compiz-manager was running, i tried to use the "desktop settings" method, and it crapped out and reverted back to the old school desktop. I then tried it again, and it reloaded compiz, and there is no screen update issues now. So it seems that you have to have both of them running in order to get all of the compiz options to work, and not have the screen refresh issue?
i have just installed ubuntu 11.04.The thing is my screen is flickering but i cant find how o set my refresh rate o 75Hz to stop it.In the monitors panel it says monitor is unknown and i can only set the refresh rate as 50,51 and 52 Hz. how to set it to 75
I just did a fresh install of natty on my desktop and at first I had a box bouncing around my screen saying input not supported. I changed my refresh rate from 50 to 52 and it got rid of it, but I still have the bouncing box on the login screen. How can I adjust the refresh rate for that?
This morning I was looking around and went to the display settings and such. And I noticed refresh rate was at 75Hz. I changed it to 85Hz and the screen went black. I tryed to reboot but after I got passed the Login the screen went black again. Now I want to change it back to 75Hz because the monitor wont allow it. How do I change it back to 75Hz from the login screen?
First off I am dual booting Windows 7. While in Win7 I have absolutely NO monitor issues. Since installing 10.04 I get a shaky unreadable display. To remedy the situation temporarily I have adjusted the resolution to 1200/800 but this is not a fix just a band aid. I should be able to run 1920/1080. As soon as I do this I get the shaky screen. I cannot change the refresh rate from 60 mhz. Again I am apprehensive by posting this because I have been flamed in other forums simply for being a noob and not knowing what to do but I would love to tap into the resources of you more experienced members.
I installed openSUSE last night thinking I'd give it a try after once using Ubuntu for a couple months and giving up on Windows completely. When I used Windows and Ubuntu I never had much trouble setting the resolution or refresh rates and ran my monitor at 1280x960 72Hz, openSUSE will let me select 1280x960, but the only refresh rate I can select is 60Hz...I've tried the default Nvidia driver that installed with the OS and I tried the one from the website, it's a Geforce FX 5200, is there some way to force the refresh rate to what I want it to be?
Just got a spare computer running ubuntu. The monitor it has atm has a problem where the screen goes crazy,the colours flicker and there are lines all over. I'm pretty sure its the refresh rate as the monitor can only support 55hz and 60hz. However, Xserver wont allow me to go below 75hz.Specs (very low I know ;D)nVidia 7600GS AMD 32002 gig ramAMW M199D
