I have two Debian machines running Squeeze x86 and x86_64.
I am having difficulties to untar a file in x86_64, although it is working in x86.
I made sure file is the same and the md5 match in both machines.
It seems like something special in x86_64 is causing it to fail.
See below:
I have a something.gz file. When I type gunzip -c something.gz this commend open the file but at the end of the file I get an error message invalid compressed data--length error. Also if I type more at the and of this commend like gunzip -c something.gz | more, file would not open. It gives some meaningless characters.I want to open this file with more.
View 1 Replies View Relatedwhen iam opening my dec_backup folder the folling error is appering :
the error is gzip :stdin:input /output error
/bin /gstar :unexpected EOF in archive
/bin /gstar: error is not recoverable :exesting now
I am going crazy with a gzip file. I can decompress the file in Windows using WinRAR but it is impossible on any UNIX operating system. the file seems to be ok. If I do file the_name_of_the_file.gz
I get: the_name_of_the_file.gz: gzip compressed data, from Unix, last modified: Sun Jan 30 14:10:21 2011
But if I do gunzip -f the_name_of_the_file.gz I alsways get: gzip: the_name_of_the_file.gz: unexpected end of file The same problem happens when I try to extract the file using the GUI tool in Ubuntu or MacOSX,
whenever I tried to boot into V1 in the following, it hang.
# uname -a
Linux tadpole 2.6.32.12-0.7.1.1381.1.PTF-default #1 SMP 2010-05-20 11:14:20 +0200 x86_64 x86_64 x86_64 GNU/Linux
# cat /etc/*release*
[code]....
After using yast2 and install "xen" hypervisor, the bootloader show "V1" as label for Xen kernel, if I choose to boot into V1, it will just hang with very little message on screen:
ELILO boot: ...
V1
SLES11_SP1
Failsafe
[code]....
My printer has stopped working.
1. I am unsure if any system changes have occured. I am sure I must have changed something, but apparently did not document it.
2. Printer does work from other computers
3 Computer was originally wireless connected, but switched to USB. This had no affect. Well I can scan now so great.
4, Printer is HP 6500a.
5. Printer has worked from this computer before
6 This is from cups error log:
D [05/Jan/2015:11:47:48 -0500] [Job 147] Set job-printer-state-message to "Can't copy stdin to temporary file", current level=ERROR
D [05/Jan/2015:11:47:48 -0500] [Job 147] prnt/hpcups/HPCupsFilter.cpp 536: cupsRasterOpen failed, fd = 0
Has anyone tried to download 11.4 via Torrent? I use Ktorrent and I'm getting Invalid data from tracker error.
DVD and CD versions
Straight download seems to be working
I was following this tutorial on How install the rpmfusion nvidia drivers in Fedora 13Here's the tutorial:Quote:Originally Posted by leigh123linuxF13 Howto for the rpmfusion nvidia drivers This is a Three-Step Process. If you don't follow all three steps, your install will fail!1. Install the nvidia driver. ( if you have 4Gb of RAM or more you will probably have a PAE kernel [32bit only] so follow the PAE part )For GeForce 6, 7, 8, 9, 200 & 300 series cards
Code:
su
rpm -Uvh http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-
[code]...
i've tryed to get rid of the ugly plymouth splash screen and this outpout at boot now:
stdin: error 0
and so on... It also appears in my /var/log/boot.log and /var/log/casper.log. But the OS works, just like before. I would like to know how can i get rid of this error. Or how can i hide it? Can i redirect the output to dev null at boot time?
Here is boot.log
Code:
stdin: error 0
Generating locales...
sl_SI.UTF-8... up-to-date
Generation complete.
[Code]....
Because it is really annoying to see an "error" when your computer boots, even if it is not really an error
Just installed Debian 8 last night and trying to run one a few of my scripts that use easygui (a front-end for python-tk basically) and I keep getting alloc: invalid block any time a file or folder selection dialog is presented. I'm able to select a file/folder with no issues, but once the dialog closes I get a variation of what appears to be a memory error followed by alloc: invalid block.
Here's one of my scripts that does it. This one pops up a file selection dialog pretty early on to ask for a file to check, and as soon as I select any file the dialog closes and that error appears in the terminal. It happens whether I run it with Python 2 or Python 3. You will need to install python3-easygui for this script to run properly if you want to check for yourself what happens. This is a first time encountering this error for me.
A few days ago I booted up my computer as normal and loaded vista. It loaded fine, but then froze at the login window. I restarted my computer but this time when I tried to load vista I got the "Error 13" message. Ubuntu still loads up fine however.
I'm fairly certain that I'm using Grub - Legacy, and since most posts that I see post the contents of the menu.lst file, I will too Code: # menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
code....
I installed Debian 5.03 Lenny successfully on my machine. I got this error during boot: ACPI : invalid PBLK length [5]. After that the Operating System boots properly and starts normally. What does this error statement mean? Is it safe to work with this installation despite this error?
View 1 Replies View RelatedIve just installed Debian Lenny and then fglrx and kde, but if i try to login to kde, i get an error message because of invalid user. Do I have to enable my user first to login to kde or something?
View 4 Replies View RelatedMade sure kernel was 2.6.26+ Changed sources. apt-get update Then it all goes to hell at util-linux... When attempting to
Code:
[root@WdoACnbF01:pts/0][18:42][28.331mb][~]
[===>uname -a
Linux WdoACnbF01 2.6.26-2-686 #1 SMP Thu Sep 16 19:35:51 UTC 2010 i686 GNU/Linux
[root@WdoACnbF01:pts/0][18:44][28.331mb][~]
[code]....
update-alternatives: error: readlink(/etc/alternatives/automake) failed: Invalid argument
I'm trying to get M-Dist v0.1 to work but I'm having problems booting up the iso. This version is based on Slackware 9.1.From what I can see before the error is this output:
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 3107k freed
EXT2-fs warning: checktime reached, running e2fsck is recommended
[code]....
I want to take my Debian server's file system home to scan with a chkrootkit and I want to copy all the files and folders to my flash drive which is only 2 gigs and the file system is 3 gigs.
So should I use gzip or tar or what? I am still looking around google but nothing is super clear. Also I am currently making a tar.gz archive of everything, but I used the GUI so I don't know if I did it right or not yet. Its taking a long time tho.
I am trying to upload an IOS in the cisco NAC Appliance. The IOS version has to be updated as 4.8. I am getting the below error when i tried. File is not in gzip format Child return status 1 Error exit delayed from previous errors. I am using the below command to unzip the IOS file. tar xzvf ccca_upgrade-4.8.0-from-4.6.x.tar.gz.
View 3 Replies View RelatedHere's my problem: While choosing to compress certain folders from within Windows 7, I marked the boot manager as 'compressed'. Now, when I try to boot, I'm not able to boot into Windows 7, or any other OS (I get an error: bootmgr is compressed, press Ctrl+Alt+Del to continue, which restarts the system and the same cycle continues.
I have a Windows 7 + open SUSE + Ubuntu 10.04 LTS wubi install boot setup. To complicate things, its a laptop, and the DVD drive is conked. Is there any way I can boot into any of my OS's? If not using a live boot, can I, perhaps make a bootable USB flash drive, boot into it and uncompress the boot manager ? Note: I'm typing this from another desktop, and I do not have Windows installed on this.
/ed:
Used this: [URL]..questions/137877/decompressing-files-on-an-ntfs-volume-from-linux/137906#137906 Still no go, getting the same error message.
I have installed debian on my dell latitude d630 laptop and am currently making a derivative for others to use. however I can't get the wireless to work. I downloaded it from the broadcom site but it comes as a gzip file instead of a deb file. if I extract the gzip file I don't get any installable (deb) files. I need the wireless to work because now a bridged network from my windows laptop isn't working.
View 3 Replies View RelatedI have a limited bandwidth and I want to download all 4 DVDs of debian 4.0r6 in a compressed format (something like bzip2, tar, ...) that contains the ISO files? Any site that distributes debian in this way?
View 1 Replies View RelatedI have this happening on my vaio laptop and FC11- top shows /usr/share/scripts/shared/onlyservice or /usr/share/logwatch/scripts/shared/onlyservice running %100 of one core of my CPU. It takes 30 to 40 min to stop. Same thing happens when I go to a GUI log-viewer. This, of course wouldn't matter on a desktop, but with a laptop it's kinda expensive. On boot up after the grub I get error: Invalid TSD data!
View 11 Replies View RelatedI am trying to build a chroot to have 32bits application on a amd64 arch. but when I try the debootstrap command i get this error that I am unable to get through; here it is: debootstrap --verbose --arch=i386 sid /var/chroot/sid-ia32 I: Retrieving Release E: Invalid Release file, no entry for main/binary-i386/Packages
then i tried this solution: [URL] and i progressed but stopped again at one error: E: can't find checksum for packages file.
I'm working on a custom Ubuntu Live CD and i have some problem with "stdin error 0" appearing before the splash screen... How can i prevent this? Or hide|redirect the output from stdin?
View 2 Replies View RelatedBottom Line: Dvd Drive died in my toshiba laptop and it was replaced (not before tech for some reason reformatted the Win7 partition... which was 100% un-needed, but thats beside the point now. I redid win7 (the tech installed vista) and am TRYING to "redo grub". Facts: The Slackware AND Ubuntu Partitions ARE STILL THERE and when i use SuperGrub Boot CD (which doesn't restore my grub by itself) to boot into slackware, i can see ALL THE CONTENT of both Linuxes still there including grub on ubuntu partition
(Tri-Boot: Ubuntu, Slackware, and WIn7) I had it working for two years or so, SO i know this "setup" works fine. I am A) Trying to do this as simply as possible. B) Trying to avoid the need to download a 800MB ISO (as seen for this issue on this forum) and trying not to have to reformat Ubuntu Partition (though I have the .Debs I have downloaded for it backed up ... all 1.7GB of them) I have /dev/sda1 as win7, /dev/sda2 as Slack and /dev/sda3 as Ubuntu (which contains Grub Legacy).. Every command I do seems to result in an error like "invalid command" or "invalid Execution format " (i think that second one is right) type errors. I compiled (awhile back) a few kernels for Slackware, but feel goofy that I cant figure what i this out (what i thought was going to be a "2 minute" fix)
-bash-3.2# tar -xzvf lzo-2.03.tar.gz
gzip: stdout: Cannot allocate memory
lzo-2.03/
lzo-2.03/src/
[code]....
This is on a VPS with 256mb memory. vmstat and /prov/meminfo both show that over 200mb is free.
I'm trying to connect to the VPN of my employer; after fix various minor issues I reach this point in which the DNS entries and the default gateway of the VPN are overwritten with the values of the eth0 device that appears by default. Therefore the vpn is not useful.
View 1 Replies View RelatedI am running Red Hat with 2.6.18-194.8.1.el5PAE kernel version. I am trying to run encryptfs to encrypt a partition on my hard drive. One of the kernel modules necessary is the md5.ko. I noticed it wasn't loaded in when doing an lsmod. I tried running modprobe md5 and it fails to load:
[root@ ~]# /sbin/modprobe -v md5
insmod /lib/modules/2.6.18-194.8.1.el5PAE/kernel/crypto/md5.ko
FATAL: Error inserting md5 (/lib/modules/2.6.18-194.8.1.el5PAE/kernel/crypto/md5.ko): Invalid argument
I ran dmesg and grepped for md5, but I didn't see anything in there.
I have installed Windows 7 followed by Fedora 11. Everytime I install Fedora 11 with Win 7, the first to boot, I get BOOTMGR missing. Later I used "df -h" command to see the disk file usage fdisk -l" to see the info regarding Disk Partitions. Went into the /boot/grub/menu.lst and modified the order. I set the partition where I find the bootmgr.exe.mui, there was another file named "memtest.exe.mui in the same file.
I navigated to the above said through Fedora 11. Located inside the Win 7 installed directory /boot/en-US/
When I changed the menu.lst file, I get a new error Error 12: Invalid device requested when I tried to boot Win 7. Does that mean that Fedora 11 GRUB is not getting the bootmgr.exe.mui since its 2 levels inside the boot directory ??
After updating from 11.3 to 11.4 the networkmanager stopped working for me. When I hover over the KDE NetworkManager icon it says Error: Invalid state. If I click it, it says Network Management disabled and checkboxes (Enable networking and enable wireless - both checked). I already tried removing /var/lib/NetworkManager/NetworkManager.state and restarting the network management (/etc/init.d/network restart). Also reinstalling the NetworkManager package.
View 1 Replies View Relatedi downloaded baldurs gate II shadows of amn iso's, because i lost one of the CD's to the box, but anyways, I went to mount the third .ISO for installation, and BAM! my computer froze, so i waited five minutes, came back, and still frozen. shut it down for 20 minutes, pulled it back up, and it's got this error as follows; "Mount: mounting /dev/disk/by-uuid/65b0a6a-a366-435a-a086-58428cfe2bd1 on /root Failed: invalid argument
[code]...