I have this happening on my vaio laptop and FC11- top shows /usr/share/scripts/shared/onlyservice or /usr/share/logwatch/scripts/shared/onlyservice running %100 of one core of my CPU. It takes 30 to 40 min to stop. Same thing happens when I go to a GUI log-viewer. This, of course wouldn't matter on a desktop, but with a laptop it's kinda expensive. On boot up after the grub I get error: Invalid TSD data!
View 11 Replies
Like the title says. Suddenly, for no apparent reason KDE jumps to 100% cpu usage. I've tried tracking this down and it's frustrating. Sometimes I have to reboot 2 or 3 times to get it back down.
View 9 Replies View RelatedMy memory usage keeps building up and up as time goes by, when it hits 100% it logs me out. I have a tad over 9 Gib in swap, that is how it was set up when I did auto install and let it do the partitions. I have 4Gib memory. When I first log in it shows about about 800+ MB being used and starts adding more from there. I can run applications for about 6-8 hours before it hits the 100% marker. At first I was blaming this on the video player, but when I put on a play list each song seems like it gets stuck in memory also adding about .02% per song to max memory.
This seems to pertain to each application I do. Uploaded with ImageShack.us. This pic shows my Computer setting and usage through system monitor and conky script. In another note, I never see my Swap partition being used at all. I am real green to linux and not sure if I was suppose to turn something on. In the partitioner it shows it being mounted and as swap.
Nagios had alerted me that the server had a very high load average exceeding the critical level (17+), when logging onto the server I found that all 4GB of the swap was in use despite the fact that there was 15GB+ of free memory (and that's not even including memory from cache and buffers!) Because it seems all heavily used pages were being stored in swap, the I/O wait on the server became very high, and 4 kswapd daemons were taking up nearly 100% available CPU. This did coincide with an error reported by Bacula during a backup job while changing to a bad tape...
From /var/log/bacula.log:
Code:
10-Dec 02:11 bacula-sd JobId 1898: End of medium on Volume "4097" Bytes=434,170,000,000 Blocks=217,084 at 10-Dec-2010 02:11.
10-Dec 02:11 bacula-sd JobId 1898: 3307 Issuing autochanger "unload slot 4097, drive 0" command.
10-Dec 02:12 bacula-sd JobId 1898: 3301 Issuing autochanger "loaded? drive 0" command.
10-Dec 02:12 bacula-sd JobId 1898: 3302 Autochanger "loaded? drive 0", result: nothing loaded.
10-Dec 02:12 bacula-sd JobId 1898: 3304 Issuing autochanger "load slot 4096, drive 0" command.
10-Dec 02:13 bacula-sd JobId 1898: 3305 Autochanger "load slot 4096, drive 0", status is OK.
10-Dec 02:13 bacula-sd JobId 1898: Volume "4096" previously written, moving to end of data.
10-Dec 03:51 bacula-sd JobId 1898: Error: Unable to position to end of data on device "Tape-1" (/dev/IBMtape0n): ERR=dev.c:1384 read e
rror on "Tape-1" (/dev/IBMtape0n). ERR=Input/output error.
10-Dec 03:51 bacula-sd JobId 1898: Marking Volume "4096" in Error in Catalog.
10-Dec 03:51 bacula-sd JobId 1898: 3307 Issuing autochanger "unload slot 4096, drive 0" command.
10-Dec 03:58 bacula-sd JobId 1898: 3301 Issuing autochanger "loaded? drive 0" command.
10-Dec 03:58 bacula-sd JobId 1898: 3302 Autochanger "loaded? drive 0", result: nothing loaded.
10-Dec 03:58 bacula-sd JobId 1898: 3304 Issuing autochanger "load slot 4098, drive 0" command.
10-Dec 03:58 bacula-sd JobId 1898: 3305 Autochanger "load slot 4098, drive 0", status is OK.
10-Dec 03:59 bacula-sd JobId 1898: Wrote label to prelabeled Volume "4098" on device "Tape-1" (/dev/IBMtape0n)
10-Dec 03:59 bacula-sd JobId 1898: New volume "4098" mounted on device "Tape-1" (/dev/IBMtape0n) at 10-Dec-2010 03:59.
At the same time, these messages starting occuring in /var/log/messages:
Code:
Dec 10 03:51:47 07 kernel: Mem-info:
Dec 10 03:51:47 07 kernel: Node 0 DMA per-cpu:
Dec 10 03:51:47 07 kernel: cpu 0 hot: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 0 cold: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 1 hot: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 1 cold: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 2 hot: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 2 cold: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 3 hot: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 3 cold: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 4 hot: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 4 cold: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 5 hot: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 5 cold: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 6 hot: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 6 cold: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 7 hot: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: cpu 7 cold: high 0, batch 1 used:0
Dec 10 03:51:47 07 kernel: Node 0 DMA32 per-cpu:
Dec 10 03:51:47 07 kernel: cpu 0 hot: high 186, batch 31 used:162
Dec 10 03:51:47 07 kernel: cpu 0 cold: high 62, batch 15 used:48
Dec 10 03:51:47 07 kernel: cpu 1 hot: high 186, batch 31 used:0
Dec 10 03:51:47 07 kernel: cpu 1 cold: high 62, batch 15 used:0
Dec 10 03:51:47 07 kernel: cpu 2 hot: high 186, batch 31 used:0
Dec 10 03:51:47 07 kernel: cpu 2 cold: high 62, batch 15 used:0
Dec 10 03:51:47 07 kernel: cpu 3 hot: high 186, batch 31 used:18
Dec 10 03:51:47 07 kernel: cpu 3 cold: high 62, batch 15 used:0
Dec 10 03:51:47 07 kernel: cpu 4 hot: high 186, batch 31 used:159
Dec 10 03:51:47 07 kernel: cpu 4 cold: high 62, batch 15 used:56
...
Dec 10 03:51:47 07 kernel: Node 3 HighMem per-cpu: empty
Dec 10 03:51:47 07 kernel: Free pages: 732052kB (0kB HighMem)
Dec 10 03:51:47 07 kernel: Active:4232128 inactive:3071288 dirty:158210 writeback:0 unstable:0 free:183320 slab:256840 mapped-file:289545 mapped-anon:3805487 pagetables:13063
Dec 10 03:51:47 07 kernel: Node 0 DMA free:10796kB min:4kB low:4kB high:4kB active:0kB inactive:0kB present:10356kB pages_scanned:0 all_unreclaimable? yes
Dec 10 03:51:47 07 kernel: lowmem_reserve[]: 0 3512 9067 9067
Dec 10 03:51:47 07 kernel: Node 0 DMA32 free:213332kB min:2500kB low:3124kB high:3748kB active:1794108kB inactive:1463220kB present:3596296kB pages_scanned:64 all_unreclaimable? no
Dec 10 03:51:47 07 kernel: lowmem_reserve[]: 0 0 5555 5555
Dec 10 03:51:47 07 kernel: Node 0 Normal free:41028kB min:3952kB low:4940kB high:5928kB active:3409444kB inactive:1471120kB present:5688320kB pages_scanned:0 all_unreclaimable? no
Dec 10 03:51:47 07 kernel: lowmem_reserve[]: 0 0 0 0
Dec 10 03:51:47 07 kernel: Node 0 HighMem free:0kB min:128kB low:128kB high:128kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no
Dec 10 03:51:47 07 kernel: lowmem_reserve[]: 0 0 0 0
Dec 10 03:51:47 07 kernel: Node 1 DMA free:0kB min:0kB low:0kB high:0kB active:0kB inactive:0kB present:0kB pages_scanned:0 all_unreclaimable? no
...
Well to cut a long story short, I fixed the problem by disabling the swap partition with 'swapoff'. After about 30 mins all the swap was freed and the server went back to normal. I don't dare reactivate the swap partition and unfortunately as this is a live server which currently has no fail over, I can't reboot either
Server Spec:
4 * Dual-Core AMD Opteron(tm) Processor 8214
32GB DDR2 ECC RAM
RHEL 5.5, 2.6.18-194.11.3.el5 SMP x86_64
Running many KVM VMs (All CentOS x64) and kksmd is used.
bacula-dir Version: 5.0.0
IBM Tape Drive using lin_tape module version 1.34.0 according to modinfo
And before anybody asks
# sysctl vm.swappiness
vm.swappiness = 10
I am running a HP dc5750 dual core computer with a 512MB Nvidia 7200/7300 graphics card my operating system is Ubuntu 10.10. Both my processors are operating at 98-104% cpu usage, it appears that gnome-appearance-properties is the culprit and the only way to return to normal is to end these processes. I have been setting up the desktop cube to my liking and the processor appears to rise up to 100% again. Would getting a 1GB graphics card correct this or is this a bug in maverick meerkat. Any advice would be appreciated. Please keep it simply as I am a Newbie to Linux and find things over-whelming at times. Also would running at 100% on both processors at indefinite periods of time harm my computer.
View 3 Replies View RelatedI have a something.gz file. When I type gunzip -c something.gz this commend open the file but at the end of the file I get an error message invalid compressed data--length error. Also if I type more at the and of this commend like gunzip -c something.gz | more, file would not open. It gives some meaningless characters.I want to open this file with more.
View 1 Replies View RelatedI am working in a office where only one internet connection available. I have configured 5 other client machines to use internet through squid proxy server. Now I want to restrict the total data usage/transfer (upload+download) to say 1 GB during a calender month. How can I achieve this setting.
View 1 Replies View RelatedI am working in a office where only one internet connection available. I have configured 5 other client machines to use internet through squid proxy server. Now I want to restrict the total data usage/transfer (upload+download) to say 1 GB during a calender month. How can I achieve this setting.
View 1 Replies View RelatedI'm running into a problem where my system is running out of disk space on the root partition, but I can't figure out where the runaway usage is. I've had a stable system for a couple of years now, and it just ran out of space. I cleaned some files up to get the system workable again, but can't find the big usage area, and I'm getting conflicting results.For example, when I do a df it says I'm using 44GB out of 58 GB:
Code:
[root@Zion ~]# df -h
Filesystem Size Used Avail Use% Mounted on
[code]....
I have two Debian machines running Squeeze x86 and x86_64.
I am having difficulties to untar a file in x86_64, although it is working in x86.
I made sure file is the same and the md5 match in both machines.
It seems like something special in x86_64 is causing it to fail.
See below:
Has anyone tried to download 11.4 via Torrent? I use Ktorrent and I'm getting Invalid data from tracker error.
DVD and CD versions
Straight download seems to be working
I have been using Wheezy for two years, and everything was OK, so I decided to upgrade to Jessie. In fact i decided to perform a clean install of jessie, so I formatted the partition where Wheezy was installed, and the /boot partition, and I installed jessie in those partitions.
As I had done with Wheezy, I installed jessie in an encrypted LVM, and the installation was ok (well, almost everything was OK, because grub and plymouth were not working, but I will open another topic about it).
First thing I did after installing Jessie was editting sources.list in order to download a few programs (plymouth, firmware linux non free, libdvdcss2, gufw, menulibre). Moreover, I downloaded a few progrmas from the Debian install DVD (flashplugin, VLC, chromium, clamav). i did not perform a dist upgrade because i was not at home, and where I was I did not have a Wifi connection (so I was using my mobile connecion -USB ethernet with an android phone-. BTW I had just performed a hard reset I had not installed any apps after that, so that mobile phone was "clean").
After that, I created a desktop user account, and I rebooted the laptop . When i rebooted, I started to tweak my user account: I edited dconf, and the gnome shell theme; and I started my mobile connection to download three extensions for gnome shell (window list, simple dock and activities configurator. I had used those extensions with Wheezy, and I had never had any problems). Ten minutes after I started the mentioned mobile connection, I reveived a SMS as I had used over 300 MB. Gnome monitor showed that I have downloaded 300 MB, and the android native data usage app showed the same. I did not download any video or music neither watch any videos on youtube, dailymotion..., I did not visit any suspicious web
I had a look at the apt logs and I din not find anything significant (I was using a no sudo user account, so i was not able to perform a dist.upgrade), I had a look at the download, video, music, picture folders and i din not find anything. I tried to check the iceweasel cache folder, but there were so many subfolders I could not check everything.
Is there something which can act as a fully fledged proxy (exactly like squid) but which can also monitor data usage?
At the moment what I do is I log data usage of IP addresses (allocated by DHCP) by using IPFM. Obviously getting a new IP address from a DHCP server isn't hard and this could be abused.
So I was thinking if I require proxy authentication and log usage that way, there is no way for anyone to abuse the system.
Does anyone know of a proxy server capable of logging data usage?
Is there any tool similar to NetMonitor for Ubuntu, which can be used to monitor the data usage.
View 1 Replies View RelatedI want to know my DSL bandwidth usage in the last 15 days.I have no network monitoring software installed.I have the default installation and my distribution is Opensuse 11.2.Is there a way I can get that information from the vanilla system?
View 2 Replies View RelatedI've set up a transparrent squid box with two nics. Eth1 = Internet eth0= LAN +Dchp my question is, can I log the data usage of a skype call. My proxy server already records all http an https requests but doesn't record some programs like skype. I know that it is not http traffic, but can I tell my system to record data use by an ip address over a nic with the help of iptables for example?
View 1 Replies View RelatedI am using Fedora 12. Prior to this I was using Ubuntu 9.10. In Fedora 12, I am facing a problem with battery power. Sometimes when it is fully charged I remove the power cord, battery power comes down to 40%-41%. It never happened with Ubuntu, which gave quite a good battery performance. My question is when it is showing Laptop Battery 100% i.e. fully charged, if I remove the cord why it comes down to 40%-41% (and always in this range).
View 8 Replies View RelatedI'm new to fedora 13 and I have been through a few installs already with a 12TB raid. Fedora is installed on a separate 250GB drive. I've mounted the 12TB drive as a single share and I'm capturing large video files (12-90GB each) to the raid in a Samba Share across the network. The system runs great for about three days and then I start getting warning messages that "the volume filesystem root has only 1.9GB of disk space remaining" then another later 205MB etc until it eventually fills to 100% and then locks the machine. If I reboot I get a Gnome error and can't login. The only solution has been to reinstall fedora again from scratch.
Each time I allocate more space for root. My current partition is 65G in size. The raid shows only 5.1TB of space used and it shows 7.2TB of free space. The raid share shows as being mounted in /media. Root shows that it will be full at 5.2TB, and I'm almost there, so I'm probably looking at another install in just a short while when it freezes again. I've read reinstall and make a larger root partition, but I'm not sure how big that must be to avoid this problem in the future. Also, is there a limitation on the size that root can be? my question stems from the fact that I have over 7TB of free space but somehow the root is reporting as 100% full at only to 5.1TB.
the data usage information from the carrier is often several hours old and is accessed in some arcane ways (logging into their website, sending a specific SMS message at best). Here's my idea: single-session data usage is perfectly reported by ifconfig ppp0. The problem is, how tokeep track of previous sessions accumulate the numbers rollover to zero at specified date To be able to do this across computers means that one needs to store it on the modem/SIM card itself. (As a specially crafted SMS message, or a contact).
View 2 Replies View RelatedI need applet which shows the total data usage (In+out) (of the current session or since the uptime) on the panel.I searched a lot, but everytime I had to click somewhere to see my data usage. I don't want that. I want my data usage displayed regularly on the panel.
View 9 Replies View RelatedI am sure that all of us know the result of top command in linux. i want to get the value that the top command return as CPU usage, memory usage. so how do i do(programming relation)?
View 3 Replies View RelatedI installed Debian 5.03 Lenny successfully on my machine. I got this error during boot: ACPI : invalid PBLK length [5]. After that the Operating System boots properly and starts normally. What does this error statement mean? Is it safe to work with this installation despite this error?
View 1 Replies View RelatedTrying simply to insert into table. Have succeeded in doing this but now want to correct user use of invalid characters. If I'm understanding correctly, Real-escape-string seems to correct these, so I've been trying to figure out how to use it. A short, test code version gives me a syntax error at INSERT VALUES, which--because it still has the single quotes in the text--tells me the real-escape-string didn't work. The code below gives me a parseing error with invalid $END at </body>.
Insert Error: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near ' VALUES (UTC_TIMESTAMP,'What's happen' bra?')' at line 1 Parse error: syntax error, unexpected $end in /home/powere15/public_html/DB/exercises_insert_record.php on line 94
<html><head><title>Exercise Catalog Insert Record</title></head>
<body>
<?
/* Change db and connect values if using online */
[Code]....
I was trying to get the status of memory usage and disk usage using sigar in windows and ubuntu. done this in windows by just copying the sigar library into jdk library. But i was unable to do so in ubuntu. I've copied the library to java-6-sun library but still can't run the program.
View 14 Replies View RelatedIs there any way to monitor one process' CPU usage and RAM usage over time on Linux? I am trying to change to a cheaper VPS and need to work out what level of CPU and RAM I need!
View 2 Replies View RelatedStarting this week I am finding that my computer will randomly start to run high CPU and using TOP. I find that its the apt-get process thats running it up at 100% (please note that top will show processes up to 800% i7quad with turbo-boost show as 8 cores). Whenever I catch this I do let it run for a reasonable amount of time 10-15 mins to allow for updates or whatever its trying.
However, I do end up having to kill -9 it as just don't understand why its running so hot. I realize this is a really early bump but its not intended as so, I was browsing the forums and realized I left the title as apt-get.... and would be better if I gave a more descriptive title. hense the edit. I really hope I am not breaking any forum rules here as I really am not intent on bumping so soon.
After about 14 hours of running constantly, top shows that MyDNS is using 99 to 100% CPU. This is insane. There isn't any hints of why this is happening in the deamon logs.
Code:
my:/home/dingle# ps aux |grep mydns
nobody 24157 0.0 0.0 27364 1596 ? Ss Apr15 0:00 /usr/local/sbin/mydns -b
nobody 24158 83.1 0.1 29120 3344 ? R Apr15 1146:34 /usr/local/sbin/mydns -b
root 25565 0.0 0.0 5160 784 pts/0 R+ 17:25 0:00 grep mydns
my:/home/dingle#
Code:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
24158 nobody 20 0 29120 3344 788 R 99 0.2 1148:24 mydns
Heck, it only has 11 domains to handle.
I wanted to run some really heavy programs on my virtual Windows (32 bit installation). Thats why I have allocated 2GB of my 3GB ram to the virtual OS on Virtual Box.
the VirtualBox is warning me that the setting is non-optimal. What do you think is the optimal setting? Is it VB:UBUNTU::1.5GB:1.5GB? Please explain the reason if you know.
I've just installed the Netbook Edition of Lucid on my MacBook, and it works great, with two issues:
First, each time I start, the computer is extraordinarily laggy (pretty much unusable), until I run System Testing for video, and go through the whole process. Then it seems to work great. Also, I'm having a 100% CPU issue, which switches between my two CPUs. There was nothing under "my processes" that showed any kind of heavy use. But, under "all processes" was something called Backend. I killed the process and now everything seems to be working just fine.
One year ago I decided to give it a try with Ubuntu. I used the 9.04 Live CD, but it didn't perform as expected - it gave randomly errors on boot up, the interface was disappearing and reappearing, applications closed themselves randomly and in the end it usually froze and I had to do the magic SysRQ or hard restart. I installed it then through Wubi - and it was somewhat more stable. It behaved sometimes excellent all the time until I restart, but sometimes it just crashed with an error when I boot up. When 10.04 came out, I wanted to try it out, so I burned the CD.
It was the same as the 9.04 when using the Live CD and when installing it using Wubi it just fails on 25%. I don't have any problems with Windows 7 and another distribution like Knoppix (6.2) runs just fine and smooth from the Live CD. No problems what-so-ever. I haven't did any clean installation on my hard drive because I don't know if this would persist and leave me with a not working system. I still would like to address the problem from a Wubi installation or the Live CD before going for a full installation.
Here is my machine:
AMD Sempron 3300+ @2.0GHz
NVidia GeForce 7300LE 384MB
1 GB RAM DDR1 (2x512MB)
A31G PCCHIPS Mobo
