Ive just installed Debian Lenny and then fglrx and kde, but if i try to login to kde, i get an error message because of invalid user. Do I have to enable my user first to login to kde or something?
View 4 Replies
I have just installed the newest Debian Stable 7.8 release on my new notebook. Before installation I had to free some disk space from the preinstalled Windows7 with ntfsresize and fdisk. In addition to the existing three primary partitions I created an extended one with three logical partitions for /(root) /home and swap, see the output of 'fdisk -lu'
Code: Select allDisk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x196585ba
[Code] ....
Partition table entries are not in disk order
For some reason I put a bootable flag on sda7, and the only small concern during installation was that some BIOS systems might not work with boot-flag no logical drives. Now, every time I boot I get this "Invalid partition table!' message which I must 'enter" away before I get to the GRUB menu.
I was installing opensuse 11.2 in parallel with windows xp.but during installation suddenly power has gone and after that opensuse is giving me the error message corrupt partition.i am also not able to login in xp. so I decide to reinstall windows, I got the error saying "invalid partition table" after the first restart of windows xp installation.
I tried to use windows system recovery console and committing fixmbr and fixboot commands, but didn't work.
i have 2 window partition(1 for windows and 1 for data).i do,nt want to format 2,nd partition.
How can I installed windows?My plan was first to install windows xp, then opensuse again.
I have upgraded from Fedora 9 to Fedora 13. When I try to install or update software I always get an error message "invalid GPG KEY" I checked my etc/pki/rpm-gpg directory and it appears I have all the keys. How do I know if they are valid? And if not how do I get the right stuff?
View 1 Replies View RelatedI am running OpenSuse 11.2 i586 on a HP Laptop
I am trying to update, but It keeps giving me these error messages, How can I fix these?
It also gives me an error message saying Installation Aborted By User when i haven't...
Subprocess failed. Error: RPM failed: rpmdb: PANIC: Invalid argument
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30977) from dbcursor->c_put: DB_RUNRECOVERY: Fatal error, run database recovery
error: error(-30977) storing record into Provideversion
[Code].....
Installed rhel 5.3 on dell r710 with md1000 as das.
After creating raid 0 + 1 and rebooting, received an error message below:
During installation of ssh I get an error message regarding dependency problems.
Dependency problems prevent configuring of ssh.
Greetings from Greece. I tried to install opensuse 11.3 in an empty disk . Unfortunately the installation progress stops in 88% and the message error says "error copy live image to the disk". I have burn two different cd but the result is always the same.Is it a hardware problem or the cd is not correct?I had the 11.2 version in the same pc without any problem for a long time.
View 9 Replies View RelatedI'm a new user for oracle,tried to install oracle 10g on redhat linux 5 but gettinh the same error message.response/ runInstaller[oracle2@localhost database_10201]$ sh runInstaller _runInstaller: line 54:/tmp/database_10201/install/.oui: Permission denied_Doany one plz help me how to give full set of permisions to an user in linux to access a folder??
View 2 Replies View RelatedIP address malformed error message Should be in form x.x.x.x. Where each x is no longer then 255.
View 2 Replies View RelatedI tried many times to install Ubuntu 10.04 but I keep getting the following error message:
Can't be the CD or the CD drive because I get the same thing with a bootable USB flash drive.
HDD in SATA 1 port
DVD burner on SATA 0 port
HDD formated
Vice versa does not work neither.
Mobo: Intel D945GNT
I am just now starting to go deeper than the surface of my computer so I am very much a beginner. I have downloaded Ubuntu 10.10 and have tried to install it by mounting the image and installing "inside windows." Next, upon reboot and selecting Ubuntu from the windows loader it eventually went to a colorful screen but stayed there... the first time I let it sit there for 20 minutes or so then restarted, uninstalled/reinstalled tried again... then I let it sit there for 3 hours, nothing. Next I tried to mount image and install "demo and full installation." This time upon reboot I choose Ubuntu from the windows loader menu and an error message came up. I will type it out below exactly as I see it because this is the same message that came up when a friend suggested I boot from a USB drive.
Busybox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell (ash)
Enter 'help' for a list of built-in commands.
(initramfs) unable to find a medium containing a live file system
I just installed Debian Jessie (3.16.0-4-amd64) on a desktop box I intend to use as a server in our home office. During installation I included the web server and SSH server options. I have a user account, 'mitchell' set up in addition to root. Everything is working great except that I am unable to log in via SSH from other machines, such as a Windows desktop also on the office LAN (using PuTTY). From the PuTTY terminal it looks like the user name is accepted because the password is requested, but after entering the password it says "Access denied".
Back on the Debian box in I see:
Code: Select allNov 26 14:12:02 DebianDevP6TSE sshd[2278]: Invalid user mitchell from 192.168.1.96
Nov 26 14:12:02 DebianDevP6TSE sshd[2278]: input_userauth_request: invalid user mitchell [preauth]
Nov 26 14:12:07 DebianDevP6TSE sshd[2278]: pam_unix(sshd:auth): check pass; user unknown
Nov 26 14:12:07 DebianDevP6TSE sshd[2278]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=rmbiserv.attlocal.net
Nov 26 14:12:10 DebianDevP6TSE sshd[2278]: Failed password for invalid user mitchell from 192.168.1.96 port 60010 ssh2
So I am guessing I need to set up either the SSHD server, or maybe something in PAM, to authorized users for SSH access?
As a note, "mitchell" is the user name I use to log on to Debian, and I am entering the same user name and password when trying to log in via SSH.
If I try to log in via SSH as "root" I get the following in the log:
Code: Select allNov 26 14:17:01 DebianDevP6TSE CRON[2329]: pam_unix(cron:session): session opened for user root by (uid=0)
Nov 26 14:17:02 DebianDevP6TSE CRON[2329]: pam_unix(cron:session): session closed for user root
Nov 26 14:29:59 DebianDevP6TSE sshd[2383]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=rmbiserv.attlocal.net user=root
Nov 26 14:30:01 DebianDevP6TSE sshd[2383]: Failed password for root from 192.168.1.96 port 60132 ssh2
I was trying to install Ubuntu 10.04 LTS on my windows xp. dowloaded and installed wubi. All worked well and system asked me to restart. After restart ubuntu was showing on multi boot screen, selected it. Then the system asked me to ESC installation or not, i didn't Esc. The Ubuntu screen was showing, but all of a sudden an error message saying INSTALLATION FAILED occurred.
My system
Processor: Intel pentium IV
Ram 1 GB
Harddisk:- 160 gb
i'v installed ubuntu 10.04 on 3 different desktops and 1 laptop. It has gone flawlessly on all 4. i a want to install it on my hp to dual boot(the others i just wiped the drives) but when i tell it to boot from the cd at first it looks like it might work, with the purple page, but after a few minutes, before i get to the install options i get an error message. my current operating systime is windows and i have an hp pavilion. with 2.5 gigs of ram and a descent graphics card.
View 3 Replies View Related10.04 new isnstall from cd goes for a minute then I get this error message:
old p3 800 machine, will this distro work on an old machine like this:
BusyBox v1.13.3(Ubuntu 1:1.113.3-1ubuntu11) built-in shell(ash)
Enter "help for a list of built-in commands.
(initramfs) mount: mounting /dev/loop0 on //filesystem.squashfs failed: input/o-put error
Cannot mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs
(initramfs)
Im trying to instal Sun Virtualbox but when download completes and I click on install I get the following error>>Message did not receive a reply (timeout by message bus) I wont even bother with this software if there are others out there that are as easy to use. I used it on Windows and thought it was great ! (thats how I eventually switched to Linux, by using it virtually at first)
View 5 Replies View RelatedTrying simply to insert into table. Have succeeded in doing this but now want to correct user use of invalid characters. If I'm understanding correctly, Real-escape-string seems to correct these, so I've been trying to figure out how to use it. A short, test code version gives me a syntax error at INSERT VALUES, which--because it still has the single quotes in the text--tells me the real-escape-string didn't work. The code below gives me a parseing error with invalid $END at </body>.
Insert Error: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near ' VALUES (UTC_TIMESTAMP,'What's happen' bra?')' at line 1 Parse error: syntax error, unexpected $end in /home/powere15/public_html/DB/exercises_insert_record.php on line 94
<html><head><title>Exercise Catalog Insert Record</title></head>
<body>
<?
/* Change db and connect values if using online */
[Code]....
I have just installed Debian 8 with Gnome desktop and trying to add my username to sudoers list.
When I open terminal and enter visudo I get the following error message...
Code: Select allfracmo2000@debian:~$ su
Password:
root@debian:/home/fracmo2000# visudo
bash: visudo: command not found
root@debian:/home/fracmo2000#
Although I am quite new to debian, I have done this successfully in the past so not sure why this is happening?
I try to setup a HPC cluster with CentOS 5.5. But now there is no Internet connection available in the room where the hardware is located so I set up ntpd server using synchronization with local clock (maybe I do something wrong). Here is my ntp.conf file on a master node (the master node has IP 10.0.1.1, a file server has IP 10.0.1.2 and compute nodes are 10.0.1.3..10.0.1.11, comments are omitted):
Code:
restrict 127.0.0.1
restrict -6 ::1
restrict 10.0.1.1 mask 255.255.255.255 notrust
restrict 10.0.1.0 mask 255.255.255.0 nomodify notrap
code....
Any time I try to install software building it from source when I run make I get a waring "Clock skew detected. Your build may be incomplete". Some software build successfully and run normally after install but some build tasks are failed for example when I try to build RPM's via 'make rpms' for BLCR I get an error message about invalid date in changelog. But the system date seems to be right. I suppose I have invalid settings of NTP.
I just installed Squeeze on an older PC. Installation seemed to go fine. But when it booted up on the installed system for the first time, I could not login - username/password failure. I tried every possible typing error and CAP LOCK error I could have made - still nothing.
I brought up a console window and tried logging in as root - same problem.
I booted into single user mode and entered passwd command to set new root password - I got a SYSTEM ERROR message from the passwd command.
I booted to a Live CD, went to /etc/shadow and deleted the encrypted password. Rebooted on the hard drive, went to console window and logged in as root, with no password required. So far so good. I entered passwd command to set new password and got the same SYSTEM ERROR message.
The machine seems fine when running on the Live CD, and the install seemed to go fine.
I was trying to install ubuntu 9.10 as a dual boot system with windows and I recieved this error message: The Grub package failed to install into /target/. Without the Grub boot loader, the installed system will not boot
This Error comes up after 94% of the install. I also cannot seem to get the side by side install option to work (sometimes this option appears sometimes it does not) I am not sure but I beleive seome of the install files have been placed on the hard drive because I only get the option now to install on the hard drive and totally wipe clean or the emptiest hard drive. So how would I get the possible Ubuntu install off the Hard drive. I have used this CD to Install before it has no scratches therefore should work. Also If I have Win Xp on a Raid 0 will the Ubuntu 9.10 install ?
Bottom Line: Dvd Drive died in my toshiba laptop and it was replaced (not before tech for some reason reformatted the Win7 partition... which was 100% un-needed, but thats beside the point now. I redid win7 (the tech installed vista) and am TRYING to "redo grub". Facts: The Slackware AND Ubuntu Partitions ARE STILL THERE and when i use SuperGrub Boot CD (which doesn't restore my grub by itself) to boot into slackware, i can see ALL THE CONTENT of both Linuxes still there including grub on ubuntu partition
(Tri-Boot: Ubuntu, Slackware, and WIn7) I had it working for two years or so, SO i know this "setup" works fine. I am A) Trying to do this as simply as possible. B) Trying to avoid the need to download a 800MB ISO (as seen for this issue on this forum) and trying not to have to reformat Ubuntu Partition (though I have the .Debs I have downloaded for it backed up ... all 1.7GB of them) I have /dev/sda1 as win7, /dev/sda2 as Slack and /dev/sda3 as Ubuntu (which contains Grub Legacy).. Every command I do seems to result in an error like "invalid command" or "invalid Execution format " (i think that second one is right) type errors. I compiled (awhile back) a few kernels for Slackware, but feel goofy that I cant figure what i this out (what i thought was going to be a "2 minute" fix)
I have a laptop with dual boot system, opensuse 11.2 and windows xp in the same hard disk.
I tried to remove suse doing the following :
Ι loaded windows xp cd and get in recovery console. After that i did Fixmbr and fixboot.
After that, after the bios screen, i get a black sceen with the message "invalid partition table"
If i type a "dir" command i can see my files, so the disks partiotions are not corrupted i guess. Just the MBR is damaged.
I installed the FC8.0 by hard disk! The system in (hd0,0) is windows xp! THEN i copy vmlinuz and initrd.img to c: Using GRUB like this:
title Install Fedora 8
kernel (hd0,0)/vmlinuz
initrd (hd0,0)/initrd.img
when finished to choose the keyborad the installing started but it said:
ImportError:/user/lib/libdhcp6client-0.10.so.0:Invalid ELF header
how can I continue to install?why this happens?
I switched over from Ubuntu because I realized Ubuntu sucks now (lol), but anyways... Now I'm trying to get Grub2 to boot up properly, but this "xputs" error pops up and drops me to the recovery prompt. I tried the grub-install dev/sda and all it did was recognize my Windows 7 OS (as Vista) and added it to the bootloader list and didn't fix the "xputs" issue.
I heard that doing a chroot is the most effective solution. Forgive me, but I don't know what "chroot" means or how effective it is. I can specify more information about where the OS is if needed. I have the boot flag set to the Debian OS at the hd(0,5) or sda5 I think, and Windows is at sda1 (I think). I just want to make sure I can fix this without damaging Windows, and I'll try to get more information.
Right now, I can only get into Windows or Debian with UBCD and Grub2 Super Disk and I know that sometimes Parted Magic could orderly mount the disks differently, so I don't know if it was sdaX or sdbX, but probably sdaX. I'll check again.
Let's say there are machines A and B. user1 is on machine A, and has access to machine B through ssh (also as user1). user2 is sitting at machine B (let's say in Gnome session). And user1 has sudo access on machine B. How can user1 send a message to user2 (so it should appear on user2's desktop) with notify-send? code...
This doesn't work. I get in result:
(notify-send:28676): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
What else should be done to make it work? (trying it on current Debian testing).
Today I installed suse 11.1 on my computer. After some time i was able to connect to the internet and the auto update program prompted for updates. after the updates were installed more updates were prompted. but now i get an error when i try to install them. edit: the error is "PackageKit Error internal-error: Installation aborted by user " if i try it manually i get an message "access denied to ......" how can i make my system update normal?
View 8 Replies View RelatedI have two Debian machines running Squeeze x86 and x86_64.
I am having difficulties to untar a file in x86_64, although it is working in x86.
I made sure file is the same and the md5 match in both machines.
It seems like something special in x86_64 is causing it to fail.
See below:
Just installed Debian 8 last night and trying to run one a few of my scripts that use easygui (a front-end for python-tk basically) and I keep getting alloc: invalid block any time a file or folder selection dialog is presented. I'm able to select a file/folder with no issues, but once the dialog closes I get a variation of what appears to be a memory error followed by alloc: invalid block.
Here's one of my scripts that does it. This one pops up a file selection dialog pretty early on to ask for a file to check, and as soon as I select any file the dialog closes and that error appears in the terminal. It happens whether I run it with Python 2 or Python 3. You will need to install python3-easygui for this script to run properly if you want to check for yourself what happens. This is a first time encountering this error for me.
