I have a something.gz file. When I type gunzip -c something.gz this commend open the file but at the end of the file I get an error message invalid compressed data--length error. Also if I type more at the and of this commend like gunzip -c something.gz | more, file would not open. It gives some meaningless characters.I want to open this file with more.
View 1 RepliesI have two Debian machines running Squeeze x86 and x86_64.
I am having difficulties to untar a file in x86_64, although it is working in x86.
I made sure file is the same and the md5 match in both machines.
It seems like something special in x86_64 is causing it to fail.
See below:
I installed Debian 5.03 Lenny successfully on my machine. I got this error during boot: ACPI : invalid PBLK length [5]. After that the Operating System boots properly and starts normally. What does this error statement mean? Is it safe to work with this installation despite this error?
View 1 Replies View RelatedOn my FC14 in /var/log/message i have a lot of erroe about rt_ioctl ..
[Code]....
I was following this tutorial on How install the rpmfusion nvidia drivers in Fedora 13Here's the tutorial:Quote:Originally Posted by leigh123linuxF13 Howto for the rpmfusion nvidia drivers This is a Three-Step Process. If you don't follow all three steps, your install will fail!1. Install the nvidia driver. ( if you have 4Gb of RAM or more you will probably have a PAE kernel [32bit only] so follow the PAE part )For GeForce 6, 7, 8, 9, 200 & 300 series cards
Code:
su
rpm -Uvh http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-
[code]...
Has anyone tried to download 11.4 via Torrent? I use Ktorrent and I'm getting Invalid data from tracker error.
DVD and CD versions
Straight download seems to be working
During boot (and in dmesg) I get the following message:
[6.782835] ACPI: Invalid PBLK length [7]
Also possibly related, whenever I close my laptop lid, kacpi_notify and kacpid eat up the cpu, and the screen doesn't actually blank.
I have this happening on my vaio laptop and FC11- top shows /usr/share/scripts/shared/onlyservice or /usr/share/logwatch/scripts/shared/onlyservice running %100 of one core of my CPU. It takes 30 to 40 min to stop. Same thing happens when I go to a GUI log-viewer. This, of course wouldn't matter on a desktop, but with a laptop it's kinda expensive. On boot up after the grub I get error: Invalid TSD data!
View 11 Replies View RelatedIn 10.04 I was using the following commands to mount an encrypted disk image:
Code: sudo losetup -f Which tells what loop back device block is available Then I'd type:
Code: sudo losetup -e aes /dev/loop0 /home/user/crypt.img and then enter the device's password
Code: sudo mount -t ext4 /dev/loop0 /media/crypt I've tried this in 10.10 and it hasn't been working (I can't remember if I did anything in 10.04 to make it work). I've installed the loop-aes-utils package and restarted my machine. Every time I try the 2nd step, after entering the password I get: Code: ioctl: LOOP_SET_STATUS: Invalid argument, requested cipher or key length (128 bits) not supported by kernel
I've written a usb device driver and a program that sends and receives data over the bulk pipe. The read function sometimes returnsI'm reading an unknown amount of data. However, using a usb tracker I can see that the correct data is being sent.The error only occurs sometimes.I expect that the read function is told to read more data that it receives it would fail and return -1, however if this was the case then every read call would fail.
View 4 Replies View RelatedI'm trying to get M-Dist v0.1 to work but I'm having problems booting up the iso. This version is based on Slackware 9.1.From what I can see before the error is this output:
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 3107k freed
EXT2-fs warning: checktime reached, running e2fsck is recommended
[code]....
I have installed Windows 7 followed by Fedora 11. Everytime I install Fedora 11 with Win 7, the first to boot, I get BOOTMGR missing. Later I used "df -h" command to see the disk file usage fdisk -l" to see the info regarding Disk Partitions. Went into the /boot/grub/menu.lst and modified the order. I set the partition where I find the bootmgr.exe.mui, there was another file named "memtest.exe.mui in the same file.
I navigated to the above said through Fedora 11. Located inside the Win 7 installed directory /boot/en-US/
When I changed the menu.lst file, I get a new error Error 12: Invalid device requested when I tried to boot Win 7. Does that mean that Fedora 11 GRUB is not getting the bootmgr.exe.mui since its 2 levels inside the boot directory ??
My organization just moved to using a zscaler proxy system. Basically, I have to use a .pac file in Firefox to get onto the proxy, which directs me to a series of two Flash pages, one to input my username, one for the password. After reading through the .pac file, I was able to get some command-line things to work by specifying the proxy given at the end. However, this server uses an SSL certificate that is not emitted by an authority, but rather directly by our organization. In Firefox, I had to import this certificate to enable https:// browsing.
Is there any way to "import" this certificate so that yum can use it? Because yum freezes with the error:
Code:
Could not get metalink [URL] error was
14: Peer cert cannot be verified or peer cert invalid
I'm trying to install Fedora 13 VM on my CentOS 5.5 64 bit install following the below link. I used this same process to install a CentOS 5.5 VM just to test the process. Now when I try to follow it making changes for Fedora Im getting an error.[URL] config file:
kernel = "/install/vm/fedora/vmlinuz"
ramdisk = "/install/vm/fedora/initrd.img"
name = "fedora13"
[code]...
In the CentOS link I posted it said to use kernel from the xen directory.Ive found out that the last fedora version that shipped with xen was fedora 8. Does anyone know where I can find a fedora 12/13 xen kernel? Ive searched google for hours and can not find a xen kernel. Actually I'm to the point where I would even use ubuntu or any similar distro if I could find a xen kernel.
Here's my problem: While choosing to compress certain folders from within Windows 7, I marked the boot manager as 'compressed'. Now, when I try to boot, I'm not able to boot into Windows 7, or any other OS (I get an error: bootmgr is compressed, press Ctrl+Alt+Del to continue, which restarts the system and the same cycle continues.
I have a Windows 7 + open SUSE + Ubuntu 10.04 LTS wubi install boot setup. To complicate things, its a laptop, and the DVD drive is conked. Is there any way I can boot into any of my OS's? If not using a live boot, can I, perhaps make a bootable USB flash drive, boot into it and uncompress the boot manager ? Note: I'm typing this from another desktop, and I do not have Windows installed on this.
/ed:
Used this: [URL]..questions/137877/decompressing-files-on-an-ntfs-volume-from-linux/137906#137906 Still no go, getting the same error message.
i followed the install method in the g95.org as follows.Installation Notes Unix (Linux/OSX/Solaris/Irix/etc.): Open a console, and go to the directory in which you want to install g95. To download and install g95, run the following commands:
wget -O - http://ftp.g95.org/g95-x86-linux.tgz | tar xvfz -
ln -s $PWD/g95-install/bin/i686-pc-linux-gnu-g95 /usr/bin/g95
everything seemed to work fine. the g95 command in terminal prompted a "no input files" so it seemed to work. i made a quick hello program to test and i get these errors.
/tmp/cc3Ugii1.s: Assembler messages:
/tmp/cc3Ugii1.s:11: Error: suffix or operands invalid for `push'
tested the program with gfortran and it worked fine. i googled around a little and it appears that the error have something to do with a 64 bit 32bit problem. i mean like the compiler is expecting 64 bit, but libraries are 32 bit. or somthing like that.
I am using fedora 13. when i restart network service then following error.
View 3 Replies View RelatedI successfully built the sources for 64 bit linux drivers from [URL].... on the 64 bit F14 machine: Linux localhost.localdomain 2.6.35.6-45.fc14.x86_64 #1 SMP Mon Oct 18 23:57:44 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux and got wl.ko:
[Code]...
We are using LPC3250 ARM9 and LTIB for building the Linux 2.6.27.8 We have written some code to access GPIO and was working earlier with opensuse 9.0 We now have fedora 11 32 bit 2.6.30.10-105.2.23.fc11.i686.PAE When we make the program we get following errors we are using GCC3.4.5
#make -C /lib/modules/`uname -r`/build M=`pwd` modules
make -C /home/shekhar/lpc3250/ltib/rpm/BUILD/linux-2.6.27.8 M=`pwd` modules
make[1]: Entering directory
`/home/shekhar/lpc3250/ltib/rpm/BUILD/linux-2.6.27.8'
CC [M] /home/shekhar/samsung_lcd/gpio/char.o
cc1: error: invalid option `64'
[code]....
I have installed a fresh copy of FC14 and when I logged in locally for the first time I was getting the error messages below. Now these same messages are filling up my messages log and it's running non stop in the background. Has anyone seen anything on this error? I have searched through Google looking for help and I'm not finding much.
This box is a simple file/web server with no monitor hooked up and no GUI. I have also included the lspci ouput below if that might help. Really looking for any suggestions or input on how I might stop the error reporting since is filling up my log files quickly.
[Code]....
Downloaded the stable kernel 2.6.36.4 from kernel.org/ (Current Kernel:2.6.18-92.el5) However i have extracted the source code .ran make mrproper copied the old configuration file and selected it by using make menuconfig .However after selecting it and clicking ok i m getting following error.
Code: .
config:656:warning: symbol value 'm' invalid for IP_DCCP_CCID3
.config:657:warning: symbol value 'm' invalid for IP_DCCP_TFRC_LIB
#config:1353:warning: symbol value 'm' invalid for FIXED_PHY
# configuration written to .config 'm' invalid for IWL4965
[code]....
[code]...
How do I fix this?
I updated my system from FC13 2.6.34.7-66 to 2.6.34.8-68 for both the kernel and the kmod-wl RPM's. After doing so, iwconfig wlan0 key 1234567890 no longer works. I get an error indicating 'invalid argument'. If I reboot using the previous kernel/wl.ko module, it works The size of the wl.ko module increased in size by almost 30%. Did I somehow get the wrong RPM?
View 2 Replies View RelatedI am trying to update Fedora 12 but I always get this error.
Error Type: <class 'yum.Errors.RepoError'>Error Value: Error getting repository data for installed, repository not found File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module> main() File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3122, in main
[Code]...
I have an error like this : You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near ''bla..bla..' at line 1. while call my function below:
function InsertSQL(strSQL: AnsiString; CS: TCriticalSection; var ErrMsg: AnsiString): boolean;
var
td: TDBCfg;
SockMySQL: PMySQL;
SQL: PChar;
begin
CS.Acquire;
[Code]...
The function always got this error while length of my strSQL contains more than 256 chars.
Bottom Line: Dvd Drive died in my toshiba laptop and it was replaced (not before tech for some reason reformatted the Win7 partition... which was 100% un-needed, but thats beside the point now. I redid win7 (the tech installed vista) and am TRYING to "redo grub". Facts: The Slackware AND Ubuntu Partitions ARE STILL THERE and when i use SuperGrub Boot CD (which doesn't restore my grub by itself) to boot into slackware, i can see ALL THE CONTENT of both Linuxes still there including grub on ubuntu partition
(Tri-Boot: Ubuntu, Slackware, and WIn7) I had it working for two years or so, SO i know this "setup" works fine. I am A) Trying to do this as simply as possible. B) Trying to avoid the need to download a 800MB ISO (as seen for this issue on this forum) and trying not to have to reformat Ubuntu Partition (though I have the .Debs I have downloaded for it backed up ... all 1.7GB of them) I have /dev/sda1 as win7, /dev/sda2 as Slack and /dev/sda3 as Ubuntu (which contains Grub Legacy).. Every command I do seems to result in an error like "invalid command" or "invalid Execution format " (i think that second one is right) type errors. I compiled (awhile back) a few kernels for Slackware, but feel goofy that I cant figure what i this out (what i thought was going to be a "2 minute" fix)
I'm wondering if there is any application being able to handle compressed SWF files. If I try it with mencoder (mplayer), it tells me:[swf @ 0x91a0a30]Compressed SWF format not supported No way in Fedora Core 11?
View 3 Replies View RelatedWhat i am trying to acheive with my minimal knowledge is to set up a linux system that will backup windows based computers to a couple of terabyte hard drives installed in this system. The backups cannot be zipped or compressed in anyway as the backups have to be able to be di-sected and only parts of them restored to their respective computers. Backing up over a network would be a great bonus but not necessary. Does anyone know a program that would fulfil my needs whilst still being simple so i can install and configure it?
View 2 Replies View RelatedI used sg_sata_ident to get the IDENTIFY_DEVICE output on my SATA drive. The output shows the drive as being able to support READ_BUFFER/WRITE_BUFFER. However, when I issue sg_read_buffer /dev/sda, I get an error - DRIVER_SENSE - Invalid command operation supported.
View 2 Replies View RelatedIf I try to do a software update, I get an error message. It is:
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module> main()
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3122, in main
backend.dispatcher(sys.argv[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 710, in dispatcher
self.dispatch_command(args[0], args[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 657, in dispatch_command
self.update_packages(only_trusted, package_ids)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1948, in update_packages
signed = self._is_package_repo_signed(pkg)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1437, in _is_package_repo_signed
repo = self.yumbase.repos.getRepo(pkg.repoid)
File : /usr/lib/python2.6/site-packages/yum/repos.py, line 121, in getRepo
'Error getting repository data for $s, repository not found' $ (repoid)
Why I can't update? Everything else works fine compiz, codecs, flash, java etc.