General :: Tar Error: "gzip: Stdout: Cannot Allocate Memory"

Aug 18, 2009

-bash-3.2# tar -xzvf lzo-2.03.tar.gz
gzip: stdout: Cannot allocate memory
lzo-2.03/
lzo-2.03/src/

[code]....

This is on a VPS with 256mb memory. vmstat and /prov/meminfo both show that over 200mb is free.

View 1 Replies


ADVERTISEMENT

Ubuntu :: Memory Error When Installing Python - Cannot Allocate Memory

Apr 19, 2010

I get this error when I run "sudo apt-get install python-software-properties"

Preconfiguring packages ...
dpkg: unrecoverable fatal error, aborting:
fork failed: Cannot allocate memory
E: Sub-process /usr/bin/dpkg returned an error code (2)

I'm trying to install deluge via ssh and my vps has 512mb ram and is only using 11% of it prior to running the code.

View 2 Replies View Related

Server :: Error - Unable To Fork: Cannot Allocate Memory

Feb 6, 2011

While Apache is off, then everything is OK, but if I start apache server after some time I get messages "Unable to fork: Cannot allocate memory" when trying to do some commands with ssh(dir,rm,top and so on).

P.S. There is free RAM when I get that message.

View 2 Replies View Related

General :: "error=12, Cannot Allocate Memory"

Apr 23, 2011

I am hosted on a VPS (OpenVZ) with:
Memory: 3gb
Burst: 3gb
OS: Cent OS 5 32 bit
Java Version:

Quote:

java version "1.6.0_17"
OpenJDK Runtime Environment (IcedTea6 1.7.10) (rhel-1.20.b17.el5-i386)
OpenJDK Server VM (build 14.0-b16, mixed mode)

I am receiving an error when I start bukkit (a minecraft server software). I have properly installed java. And I am in the correct directories.

Code:
java -Xms512m -Xmx2600m -jar craftbukkit.jar nogui

After doing that command I get the following:

Quote:

[root@server1 Minecraft]# java -Xms2600m -Xmx2600m -jar craftbukkit.jar nogui
[Lnet.minecraft.server.Statistic;@1319c
146 recipes
[Lnet.minecraft.server.Statistic;@1319c
16 achievements

[Code].....

Do notice the line in the above quote ""sh": java.io.IOException: error=12, Cannot allocate memory."

The server will generate a world, but you can not connect to it using the MC client. Does anyone know what the problem is? I have googled for this problem for literally the past 4 hours and I am getting no where.

View 1 Replies View Related

General :: Allocate The Use Of The Memory?

May 4, 2011

I'm running a quite complex model, and it's taking me around a week to complete the run, and one of my colleagues says that he can run it in one-two days. After looking to several forums to know how does it work, I've seen how the memory is used (using the command ps -A --sort -rss -o comm,pme), and the model run just takes 0,3% of the memory. I bought a 4 cores and 8gb of RAM laptop to be able to run the model fast, but I don't know how to allocate the use of the memory to concentrate it in developing that task. Is that possible?

View 2 Replies View Related

General :: Unable To Allocate Enough Memory

Jun 20, 2011

On SunOS 10 get an error when starting a large Java process with over 2Gb memory.

View 4 Replies View Related

Networking :: Error: "SIOCSIFADDR: Cannot Allocate Memory" Adding Virtual IPv6 Addresses

Apr 30, 2010

I get errors trying to virtual IPv6 Addresses i a lab environment. It works fine up to 2033 (?) adrressses, but when I try to add more i get "Cannot allocate memory" error:

# ifconfig eth0 add 2001:1b70:8282:2021:18:0:20:1
SIOCSIFADDR: Cannot allocate memory

This is on Ubuntu Server 9.10 (64-bit).

View 6 Replies View Related

Ubuntu :: Error: Allowed Memory Size Of 20971520 Bytes Exhausted (tried To Allocate 7680 Bytes) In /var/www/index.php On Line 2

Jan 9, 2011

I recently had to move to a new machine, everything went well except for one thing. I did fresh installation of LAMP server all with default configs. Every time I'm using PHP script to that invokes include, require or require_once I get the following error:

Code: Fatal error: Allowed memory size of 20971520 bytes exhausted (tried to allocate 7680 bytes) in /var/www/index.php on line 2 index.php file: PHP Code:
<?php    include "index.php";?>
icukapi.php file:
PHP Code:
<?php    echo "test";?>

My memory_limit in php.ini is set to 20M. I tried to increase that however it didn't quite work. PHP seems to allocate all possible space and return that message every time i try. If somebody has an idea of how to fix it I would be more than grateful. I spend quite a long time searching for an answer however the all things i found suggested increating memory_limit which in this case doesn't work.

View 1 Replies View Related

General :: Error - Gzip :stdin:input /output Error /bin /gstar :unexpected EOF In Archive

Mar 28, 2011

when iam opening my dec_backup folder the folling error is appering :

the error is gzip :stdin:input /output error
/bin /gstar :unexpected EOF in archive
/bin /gstar: error is not recoverable :exesting now

View 1 Replies View Related

Ubuntu :: How To Allocate More Memory

May 16, 2010

i just recently installed ubuntu 10.04 onto my laptop. its running as a dual boot. i only allocated about 10gb of memory and have already run out. is it possible to allocate more memory afterwards

and another bug that i am having is my shift key is not functioning properly. if anyone happens to know this issue too. so i can't do exclamations of periods, capitalizations, etc... how would you remap your keyboard

View 7 Replies View Related

Ubuntu :: Getting Cannot Allocate Memory

Feb 22, 2011

I have mounter ubuntu karmic 9.10 on a XP sp3 using vmware,i wanted to move some files through share.everything went well for 2 hours then i keep getting Cannot allocate memory.

View 2 Replies View Related

Software :: Cannot Allocate Memory

May 3, 2011

when I try to execute busybox on Redhat Linux 4 I am getting the following error. Any idea why ?

View 1 Replies View Related

Ubuntu :: How To Allocate Memory To Program?

Nov 24, 2010

I am running BWA (burrow-wheeler alignment) and, keep getting an error that there isn't enough memory allocated. How do I change the memory allocation? I'm working on a good quality desktop only a little over a year old, so having the memory shouldn't be the problem.

View 9 Replies View Related

Software :: How To Allocate More Than 2GB Memory For An Application On 32 Bit?

Oct 6, 2010

Can anyone tell me is there a way to add more than 2GB memory application in a 32 bit server? I found on many threads that it is not possible to set memory limit of a particular application to more than 2GB. I am using Fedora release 8 and trying to add more than 2GB memory to tomcat. If I modify the variable CATALINA_OPTS in /opt/bobcat/bin/catalina.sh (Startup script of tomcat) and add a value greater than 2GB for memory, tomcat wont start.Is there any work around / Kernel Patches available? Suggestions??

View 10 Replies View Related

Debian Multimedia :: ATI Driver: Can't Allocate Memory?

Oct 24, 2010

This is a clean install of Debian Lenny, using KDE3.5.10 desktopHave followed these instructions:http://wiki.debian.org/ATIProprietary

Using kernel 2.6.26-2-686, I think the fglrx module has been built correctly.
orac:~# modinfo fglrx
filename: /lib/modules/2.6.26-2-686/nonfree/fglrx/fglrx.ko

[code]....

View 2 Replies View Related

OpenSUSE Hardware :: Rt2860sta.ko - Cannot Allocate Memory

Jun 9, 2011

I just switched over to openSUSE about a week ago from Ubuntu and I just purchased an Asus N13 PCI-E wireless network adapter which uses an RALink 2860 chipset. I plugged it in and openSUSE was able to detect it and everything but when I went to go configure it using YaST, it wouldn't be able to scan for networks.

So, I reinstalled my old adapter, downloaded the latest source from RALink and compiled the drivers. When I tried to use insmod on the new .ko that was compiled, I got the "Could not allocate memory" error.

If you need dmsg logs or anything else, I can reinstall the card and get those.

View 4 Replies View Related

Programming :: Allocate Memory To A Program Before Execution?

Jan 3, 2011

I went to an interview last week and there was this guy who asked a simple question that i have been trying to solve for a couple of days. I tried google but i just cant get the search keywords right. The result were just useless. Well, the question is : "How can we allocate a limited memory to a process before we start its execution" well, the question is related to an X11 system so may be some flags must be set to limit its memory.

View 9 Replies View Related

Programming :: Malloc Fails To Allocate Memory

May 7, 2011

I am developing a code where I need to store the planes of an object in a tree & also i need to store it in a list for further processing ... when I try to allocate using malloc the memory allocation when i checked this in internet , I came to know that it may because the memory that I am trying to allocate may be more than the size_t variable.

View 9 Replies View Related

OpenSUSE Install :: Unable To Allocate And Lock Memory?

Jan 20, 2010

On my windows console, i have installed sun virtualbox. I only have 768MB ram and so i downloaded a trial version of eboostr. I thought it would work, but when i tried an install of 11.2, also, i tried a debian install, it did the same thing, it froze up in the middle of the install with the error Code: unable to allocate and lock memory. I guess that eboostr doesn't work, but is there a way to use a flash drive as ram in virtual box?

View 5 Replies View Related

General :: 'File Is Not In Gzip Format' - Error Exit Delayed From Previous Errors

Oct 23, 2010

I am trying to upload an IOS in the cisco NAC Appliance. The IOS version has to be updated as 4.8. I am getting the below error when i tried. File is not in gzip format Child return status 1 Error exit delayed from previous errors. I am using the below command to unzip the IOS file. tar xzvf ccca_upgrade-4.8.0-from-4.6.x.tar.gz.

View 3 Replies View Related

OpenSUSE Network :: 11.3 - No Ethernet After Sleep (Suspend To RAM) - Cannot Allocate Memory

Oct 17, 2010

After updating to openSUSE 11.3, and restarting my computer, I placed my computer in sleep(suspend to RAM) mode, and I lost my internet connectivity. I noticed that my computer was only connected through ethernet. After entering "dhclient eth0" in a terminal, I received the following output.

Code:

RTNETLINK answers: Cannot allocate memory

This is the first time that I have had issues with connecting to the Internet using Ethernet.

View 6 Replies View Related

CentOS 5 :: Mail Server Stopped Working - Cannot Allocate Memory

Jan 21, 2011

My mail server stopped working this weekend, when I got in today I restarted and all the emails came through. The panic_log shows: daemon: accept process fork failed: Cannot allocate memory several times over the course of a few minutes. Can anyone give me advice on troubleshooting this one?

View 1 Replies View Related

Programming :: Memory Allocate In Function And Call It By Reference For Array Structure?

Jul 2, 2011

I am writing a function(in C language in Linux) to initialize an array of a structure from a mysql table by calling a function by reference but I have a problem with call this function by reference . this is my program:PHP Code:

#include <stdio.h>
#include <stdlib.h>
#include <string.h>

[code]...

View 4 Replies View Related

Programming :: Vuse The Capacity Feature To Allocate All Memory At Beginning Of Program?

Jan 7, 2010

I have a vector that I do not want to call new on during operation so I use the Capacity Feature to allocate all memory at beginning of program

Code:
struct chartype
{
public:
unsigned char value[MAXCHARTYPE_SIZE];
};

[Code].....

View 2 Replies View Related

Debian :: Gzip - Stdin - Invalid Compressed Data - Crc Error

Jun 18, 2011

I have two Debian machines running Squeeze x86 and x86_64.

I am having difficulties to untar a file in x86_64, although it is working in x86.

I made sure file is the same and the md5 match in both machines.

It seems like something special in x86_64 is causing it to fail.

See below:

View 9 Replies View Related

General :: Getting Out Of Memory Error?

Feb 20, 2010

I am getting "out of memory" error when i am trying to format 8GB pen drive in ntfs format .So, i added two swap partition 64MB (as my device has 32MB RAM)to increase mem.but swap space used is max 1000Kb.

View 3 Replies View Related

Server :: SFTP Memory Error / Getting An Out Of Memory?

Jan 8, 2011

I have been setting up a vps I got out with bhost.net, with CentOS installed. I've been learning and have set up everying I need with the exception of ftp/sftp.

Using yum I installed vsftpd and ran into problems, thinking it was something I might of done I did a fresh install of CentOS and I still recieve the same problem on a fresh install so it is nothing I have done to the server.

The problem is when connecting via a sftp client I get an out of memory error. This error is listed in the putty faq ( url ) under A.7.5, there is a brief explaintion of the cure under A.7.6.

there is mention of a login script but I don't know where this is located. I'm a novice at Linux but by no means incompotent when it comes to computing.

View 5 Replies View Related

Fedora Installation :: Error: Could Not Allocate Requested Partitions - Not Enough Free Space On Disks

Jul 11, 2010

I'm trying to install Fedora 13 on my HP dv6 laptop and when I try to use the Use Free Space installation type, I receive a Partitioning Error: Could not allocate requested partitions - not enough free space on disks. Before I started the install, I used the Disk Management utility in Windows 7 to shrink the volume of the C: drive down to 242 GB and leaving 210 GB Unallocated. Here is what the screen looks like when I select Create Custom Layout (also receive the not enough free space error):

Device (sda) Size Type
sda1 199 ntfs
sda2 248,018 ntfs
Free 215,175
sda3 13,443 ntfs
sda4 103 vfat

View 5 Replies View Related

General :: Log Rotation Of Stdout?

Jun 1, 2011

I have a Linux program which can write information to stdout and stderr.

I have a shell script which redirects that output to a file in /var/log. (Via >> and 2>&1.)

Is there a way to make that log file rotate? (max size, then switch to a different file, keep only a limited number of files)

I've seen a few answers which talk about the logrotate program, which sounds good, but they also seem to be focused on programs which are generating log files internally and handle HUP signals. Is there a way to make this work with a basic output redirection script?

View 3 Replies View Related

General :: How To Know Gzip Compression Level

Apr 12, 2011

Given a gzip compressed file, how do I know what compression level (1-9) was used for it?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved