I am trying to build a chroot to have 32bits application on a amd64 arch. but when I try the debootstrap command i get this error that I am unable to get through; here it is: debootstrap --verbose --arch=i386 sid /var/chroot/sid-ia32 I: Retrieving Release E: Invalid Release file, no entry for main/binary-i386/Packages
then i tried this solution: [URL] and i progressed but stopped again at one error: E: can't find checksum for packages file.
I keep getting this error whenever I try to update or reload. Does anyone know how to get rid of this or fix it?
GPG error: http://repository.cairo-dock.org karmic Release: The following signatures were invalid: NODATA 1 NODATA 2Failed to fetch http://repository.cairo-dock.org/ubu...6/Packages.bz2 Sub-process /bin/bzip2 returned an error code (2)
I keep getting this error on my debian server (Buffalo Linkstation so there is no GUI):
Debian Linux Version 2.6.12.6-arm1 W: Failed to fetch http://ftp.us.debian.org/debian/dists/squeeze/Release Unable to find expected entry main/binary-arm/Packages in Meta-index file (malformed Release file?) W: Failed to fetch http://security.debian.org/dists/squeeze/updates/Release Unable to find expected entry main/binary-arm/Packages in Meta-index file (malformed Release file?)
E: Some index files failed to download, they have been ignored, or old ones used instead.Ive tried and tried changing the source.list to different repos but keep getting the same error over and over. Im really not sure what to do and I have no idea how to fix it. Its been working fine for the longest time.
source.list #### Debian Main Repos #deb http://http.us.debian.org/debian/ stable main contrib non-free #deb-src http://http.us.debian.org/debian stable main contrib non-free #deb http://security.debian.org stable/updates main contrib non-free #deb-src http://security.debian.org stable/updates main contrib non-free
I am trying to install Wheezy testing i386 using netinstall .iso disk.
After the disk partition stage and while in the 'Install the base system' stage I get the message;
Debootstrap error:
The following error occurred: The bzcat is not available on the system Check /var/log/syslog or see virtual console 4 the details.
I have over the past couple of months downloaded three daily builds of testing and the md5sums are good on all of them yet I have the same problem with each disk.
This has really thrown me. I have been using Ubuntu for a few years now and have just decided to upgrade my home server with a bigger hard drive. I have opted for a fresh install of Ubuntu 9.10 x64 server edition and have plugged my new SATA hard drive and existing IDE CDRom drive into my box.
The install disk burns fine and verifys itself. I have also checked that it is ok as part of the install and again it shows as all ok. The install starts fine and I can partition the drive (either mannually or guided) abd the base system starts to install but then at around 50% (roughly) I get a pop up box saying:
"Please insert the disc labeled: 'Ubuntu-Server 9.10 _Karmic Koala_ - Release amd64 (20091027.2)' in the drive /cdrom/' and press enter. Pressing enter does nothing. I can't eject the CD any way and obvioulsy have no second disk! I have burnt a fresh downloaded iso but again have the same problem.
And I added umask 022 to the user login script problem I have: I login with user and password that exists as a local user on my suse machine. I can read and download from my homedirectory, but I cannot upload with filezilla. Then I get the error: 550 permission denied critical file transfer error
In 10.04 I was using the following commands to mount an encrypted disk image:
Code: sudo losetup -f Which tells what loop back device block is available Then I'd type:
Code: sudo losetup -e aes /dev/loop0 /home/user/crypt.img and then enter the device's password
Code: sudo mount -t ext4 /dev/loop0 /media/crypt I've tried this in 10.10 and it hasn't been working (I can't remember if I did anything in 10.04 to make it work). I've installed the loop-aes-utils package and restarted my machine. Every time I try the 2nd step, after entering the password I get: Code: ioctl: LOOP_SET_STATUS: Invalid argument, requested cipher or key length (128 bits) not supported by kernel
I tried to install nvidia drivers & when I tried aptitude update it says that 'backports.debian .org' Release file has expired ignoring......How long does it normally take to update?
I have a dual boot computer. I seem to be having a bit of a problem with Grub lately. Every time I do any kind of update in Debian Lenny AMD 64 it borks my Grub. The first time I had to change a few lines in menu.lst (hd1,1 to hd0,1), no problem. The second time, things went downhill fast and G-Parted was giving me errors on my NTFS partitions. I had to do an XP repair, fixboot, and I had to reinstall Grub completely to the MBR.
Now, I having a "Grub Loading stage1.5. Grub loading, please wait.... Error 22". All I did was update Debian Linux and shut down. From my initial searches this is an error relating to not finding the correct partition. I have booted with a G-Part CD and it shows all my partitions. I do have a Windows XP Home boot cd if I need it. Here is my partition outline if you need it:
/dev/sda1 NTFS (Windows) flags--boot /dev/sda2 Ext3 (Linux) /dev/sda3 FAT32 (shared space between Windows and Linux) /dev/sda4 extended /dev/sda5 linux-swap
first time with debootstrap, i followed: [URL] the error i get on boot looks like this:
Code: Select all [URL]
they did not mention lvm speficically so i just installed lvm2 inside the chroot and created my fstab like this:
Code: Select all/dev/mapper/debian--unstable-root / ext4  errors=remount-ro 0    1 /dev/mapper/debian--unstable-home /home ext4  defaults    0    2 /dev/mapper/debian--unstable-tmp /tmp    ext4  defaults    0    2 /dev/mapper/debian--unstable-var /var  ext4  defaults    0    2
Having one mounted from jessie looks like this:
Code: Select all/dev/mapper/debian--unstable-root on /home/julius/other-systems/debian-unstable type ext4 (rw,relatime,data=ordered)
So I guess the fstab is correct
I already tried to "refresh" the inittab with:
Code: Select allupdate-initramfs -u command ran ok, but no change at boot.
Im currently installing debian on my old server, its a 64bit computer, so i've downloaded the amd64 for this project. But under the Basis Installation, of this cd image, im getting a debootstrap warning every time i want to continue the installation, the last warning i remember was something coreutils_6.10-6_amd64.deb (Something like that, not totaly sure), and im lost, can't find anything closely related to the subject.
For my dissertation I created a debootstrap install of Lenny. When I boot this system I just can login with root without a password. When I want to ssh this machine with the debootstrap install I can't just login with root. I'm asked for a password which I don't have.
So I created one with passwd root and after that I can connect to the machine with ssh and the given password. But the machine still logs in with without a password.
I have a set of two amd64 machines with Debian Lenny. Machine 2 reads all the users' information from the Machine 1 through LDAP. Also, in Machine 2 I set up a dchroot environment for 32 bits compatibility ( following [URL]
In addition to the above instructions, on this Machine 2, I set up /etc/libnss*, /etc/ldap/*, and /etc/nsswitch.conf both for the amd64 and for the i386 environments. I have no problems if I'm in the native amd64 mode. However, once I enter the i386 dchroot, some strange things happen:
1) For users from uid=1000 to uid=1031, I get an error if running 'whoami' (Cannot find name for user ID XXXX) and if I run 'id' , I get all the correct group numbers but no translation to group names in parenthesis as it should be. 'ls -l' also only lists group numbers but no names.
2) for user 1032 I cannot even change into the dchroot, I get the error "E: Group '1,031' not found"
When I want to update with synaptic I get this error:Ophalen van ts/Release is mislukt Unable to find expected entry 'iceweasel-5.0/source/Sources' in Release file (Wrong sources.list entry or malformed file)Some index files failed to download. They have been ignored, or old ones used instead.
I have a weird problem with one of my servers (normal PC hardware). I was connected remotely using Putty, doing some stuff, and all of the sudden some commands, like "ls" stopped working, giving a "file or command not found" type of message. I restarted the ssh session, only to find out I couldn't log on any more (access denied). When I got home and rebooted the system, I was greeted with this:Booting 'CentOS (2.6.18-194.el5xen)'root (hd0,0)Filesystem type is ext2fs, partition type 0x83kernel /boot/xen.gz-2.6. 18-194.el5Error 15: File not foundPress any key to continue...Then I searched about this, found out that the files in /boot/grub/menu.lst did not exist at the specified location (/boot/xen.gz-2.6. 18-194.el5). Somehow I managed to find them in another place, copied them in place, and now I get:Error 13: Invalid or unsupported executable format
Just installed Debian 8 last night and trying to run one a few of my scripts that use easygui (a front-end for python-tk basically) and I keep getting alloc: invalid block any time a file or folder selection dialog is presented. I'm able to select a file/folder with no issues, but once the dialog closes I get a variation of what appears to be a memory error followed by alloc: invalid block.
Here's one of my scripts that does it. This one pops up a file selection dialog pretty early on to ask for a file to check, and as soon as I select any file the dialog closes and that error appears in the terminal. It happens whether I run it with Python 2 or Python 3. You will need to install python3-easygui for this script to run properly if you want to check for yourself what happens. This is a first time encountering this error for me.
A few days ago I booted up my computer as normal and loaded vista. It loaded fine, but then froze at the login window. I restarted my computer but this time when I tried to load vista I got the "Error 13" message. Ubuntu still loads up fine however.
I'm fairly certain that I'm using Grub - Legacy, and since most posts that I see post the contents of the menu.lst file, I will too Code: # menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8), # grub-md5-crypt, /usr/share/doc/grub # and /usr/share/doc/grub-doc/. ## default num # Set the default entry to the entry number NUM. Numbering starts from 0, and code....
I installed Debian 5.03 Lenny successfully on my machine. I got this error during boot: ACPI : invalid PBLK length [5]. After that the Operating System boots properly and starts normally. What does this error statement mean? Is it safe to work with this installation despite this error?
Ive just installed Debian Lenny and then fglrx and kde, but if i try to login to kde, i get an error message because of invalid user. Do I have to enable my user first to login to kde or something?
Every time I try to set to standard.(cautious|medium|advanced) I get Apr 26 17:20:59.960 7f7faff15700 Fatal error: can't load actions file '/etc/privoxy/match-all.action': invalid line (9): { +standard.Cautious } /
or something similar. No additional help is available in the docs. So i try to use http://p.p (i.e. config.privoxy.org), and click on [URL]... expecting to get the three mode buttons. It just returns to p.p.
I already set the three edit vars to allow remote editing etc.So I looked in the top 15 Google hits for "Privoxy standard.Cautious". Apparently, nobody else knows how to do this either even tried launching firefox in root. but I'm getting kind-of frustrated with the writers/maintainers of Privoxy 3.
when I reformat ubuntu, I use AptonCD to save packages and then restore them without downloading anything over again. what I want to know is: I have the 32 bits ubuntu installed and then I downloaded the 64 bits version. If i reformat to the 64 bits one, would the DVD saved aptoncd packages from the 32 bits work on the 64 bits installation?
I am wondering if I can install a 32 bits guest Windows XP in VirtualBox in my 64 bits Ubuntu Natty host? I need a 32 bits Windows to run some programs.
I'm quite new to linux and I recently (and courageously) upgraded the computer of my work from opensuse 11.0 32bits to opensuse 11.2 64bits.
Well, everything would be quite fine except that I still have some softwares 32 bits that have the 64 bits version available. I know that because, using YaST, I can see by the Installed software section that there are 'choices' of versions for some programs; these versions are 'i586' and 'x86_64', and many of them have the i586 version installed.
So, I wonder if there is some type of auto upgrade all programs which are i586 and have the matching x86_64 avaliable...
I recently started having this odd behaviour while using and loading cpufrequtils on boot, I don't know if it is happening to someone else.During boot I'm getting( when /etc/init.d/cpufrequtils invokes /etc/init.d/loadcpufreq to load the proper module):
Loading cpufreq kernel modules...FATAL: Error inserting speedstep_centrino (/lib/modules/3.0.0-1-amd64/kernel/drivers/cpufreq/speedstep-centrino.ko): No such device FATAL: Error inserting pcc_cpufreq (/lib/modules/3.0.0-1-amd64/kernel/drivers/cpufreq/pcc-cpufreq.ko): No such device
I am trying to install debian on my windows PC but am receiving some errors with it. I have downloaded "debian-506-amd64-DVD-1.iso" from debian website and am seeing that the md5 sum is correct. I am getting following error when I choose Graphical Install or install.
[ 1.480788] crc error [ 1.569788] kernel panic -not syncing:VFS: Unable to mount root fs on unknown block(253, 52)
Description of my PC: I have 2 hard disks
1. IDE hard disk (80 GB) -> windows is on this drive 2. SATA hard disk(250GB) -> I intend to install debian on this drive. 3. MSI motherboard & AMD 64 processor with 1 GB RAM. 4. NVidia external graphics card based on AGP slot(256 MB)
EDIT:: This time I got one more error message prior to the 2 shown above [some number] PCI:Cannot allocate resource region 0 of device 0000:00:00.0
