Debian :: Cannot Ping Or Connect To Samba
May 31, 2010
Strange things are happening today to my pc with debian squeeze 2.6.32-3-amd64 kernel.
It can connect to internet via my wirelss rt2870 driver (Ralink, Belkin usb wireless). But I cannot ping any of my other computers in the home network (served by a Belkin N+ wireless router). Other computers can ping it.
I am also connected via ethernet directly to another desktop. Last night I can access the shared file (samba windows share) in this other computer, using ethernet (disabling wireless). Today I cannot. I cannot even ping it or any computer, or itself.
I am using network manager with this interface:
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet dhcp
View 14 Replies
ADVERTISEMENT
Apr 8, 2011
I'm trying to run Debian server in our network. We have SSG5 Juniper Firewall set up to route traffic from our trusted network 192.168.50.0/24 to our DMZ 93.153.125.224/28I can connect / ping all Windows servers which are in DMZ. When I try to connect my Debian server instead of one of the server's static IP I'm unable to connect or ping to it. The server itself is able to connect to internet resolve DNS if I allow connection to our trusted network I'm able to ping or connect to any computer in trusted network but still unable to ping from trusted to DMZ. The SSG5 policy is set up to allow any connection from trust to DMZ and interface is set up to route all traffic.I have tried to trace the ping It'll go through firewall right to the interface needed but then it'll time out as like the server is not connected at all.
View 1 Replies
View Related
Jun 9, 2011
I'm trying to set up Samba on a virtual Server.
When I connect to it from itself it works fine (smbclient -L localhost). But when I try to connect to it from the outside I get rejected.
Connection to AAA.BBB.CCC.DDD failed (Error NT_STATUS_UNSUCCESSFUL)
I'm guessing this is a ports issue? That's kinda weird since I thought Debian didnt come with an firewall. And port 80 and 22 works fine.
View 3 Replies
View Related
Jul 9, 2010
Ive got a problem on my server ....installed Debian 5 , Webmin and than syscp settung up syscp ready ....
I try to ping "localhost" ansver ping: unknown host
I try to ping "localhost." there is a host with IP 127.0.0.1
I need it to change it in "localhost"
Is that the bind9 maybe?
View 1 Replies
View Related
Apr 27, 2010
I've reinstalled my debian file server - was running 4.0 and went for a clean 5.04 install.
Everything worked out well, system is running even more smoothly but I cannot connect to the shares.
I had backed up my smb.conf and put that one in place, the users are created + smbpasswd's are set.
Samba is running and yesterday (day of reinstall) I was able to connect without any problem but today I get a Quote:
Smbstatus shows that there has been a connection, the username is listed in /etc/passwd and I entered the password once again but no difference.
At first, I thought there was a problem with file/directory permissions but I have restored the data with rsync so those permissions are like before.
I have read quite some about setting up/configuring Samba and I guess it must have something to do with credentials but no clue to where to look anymore.
View 5 Replies
View Related
Apr 6, 2011
I have a debian server installed with a static ip. Now i am able to ping my ip, but when i try to configure a domain name with the nameserver as my ip, i am not able to ping the domain name
eg:
View 7 Replies
View Related
Jul 15, 2011
I am using an virtual machine. where I need to ping from one machine to another. earlier I was able to ping. But after going to google.com once, I cannot ping back to this machine.
But if I gave ping -I eth1 <IP> then I can ping.
I cannot install any package, so tell me solution which includes not installing any package.
View 2 Replies
View Related
Jul 8, 2011
I try to use the "ping -a" command for getting an audible ping. But there is just silence The command "beep" works fine, so everything should be ok with the speaker (in the konsole).
View 3 Replies
View Related
Jul 29, 2011
I have installed openvpn on an ubuntu 10.04 server. I run 11.04 on my desktop. It can connect to my VPN server. The problem is, I have ZERO internet access. I cannot even ping an IP address.
View 5 Replies
View Related
Nov 11, 2010
i'm running some virtual Fedora installations on a windows server 2008 with hyper-v. Most of them are Fedora 12 and 13. Everything works fine for some years. Yesterday i want to upgrade a F13 machine to F14 by netistall. The upgrade ran without any problems. After the reebot the machine was off the network. All the networkconfigs by DHCP are OK, IP address, gateways, DNS settings and so on. But the machine can't ping or connect to other hosts. I tried an VM from scratch with both F14 i386 and x86_64 - same ****. This is the first time i had such a problem by upgrading Fedora machines.
View 3 Replies
View Related
Mar 30, 2010
I have set up UEC on a single machine 64 bit blade. I have followed the steps as per the documentation.I am using Managed NOVlan mode. I have installed the Karmic kola image. When I try to run the instance, I get an error "no resources available. Try --addressing private". When I try addressing private, an ip address 172.19.1.2 is assigned and the instance was running.
a) When trying to ping the ip, error displayed that the host is unreachableb) I am also unable to connect to ubuntu@172.19.1.2 using ssh. Error message is displayed that " No route to host".I have searched the forums but couldnt find any solutionPS: I suppose everyone is very busy. I see very limited responses to posts. Sharing your experience and expertise will be helpful for all and will reiterate the meaning of ubuntu
View 1 Replies
View Related
Apr 20, 2010
I posted the same problem before but did not get answers, I guess due to the unattractive title. I have two Ubuntu machines, both desktop version with a server installed on top. They are both on the same network. It seems that when I restart the remote computer, I can ssh to it fine for a while but then I get the following:
Read from remote host: Connection reset by peer lost connection.
View 3 Replies
View Related
May 2, 2010
I have an Acer Aspire One that worked fine with version 9.* of Ubuntu, then I upgraded to v10.1. Now Thunderbird, Evolution, and Firefox (Namoroku?) can't connect, either wirelessly or by Ethernet cable, to my ISP. I get error messages like "connection timed out" or "cannot find {link}". I can PING my ISP from Terminal, though, and I have the machine set up for dual boot with Windows 7 and Firefox works fine under Windows.
I have no idea what to look for or where to start. Any help would be greatly appreciated.
Here's the output from sudo lshw -c net
*-network
description: Ethernet interface
product: Atheros AR8132 / L1c Gigabit Ethernet Adapter
vendor: Atheros Communications
[Code]....
View 2 Replies
View Related
Apr 22, 2010
I have a box that I installed Elastix on as I'm trying my hand at Voip and Linux. I'm basically very green when it comes to Linux and the console. As I was following a guide @ engineertim.com to securing the box, it asked me to: wget [URL], But I get: Resolving engineertim.com... failed: Temporary failure in name resolution. I searched around and tried configuring resolv.conf to no resolve - :) unintended pun
I changed /etc/sysconfig/network to include GATEWAY=192.168.1.1 From the internet I have a modem-192.168.2.1, a telecom voip box-192.168.15.1, and then my router 192.168.1.1 I'm able to ping machines attached to the router but nothing beyond that. I tried to get the results for ifconfig via putty on this machine but it says command not found. I can get it when I log in at the box in question though.
View 10 Replies
View Related
Jun 4, 2010
Tried turning firewall off, i tried port forwarding tcp port 22, but it still doesn't work. Also am unable to ping modem over WAN, i can ping the modem locally though. Tech support claims pinging and ssh is not part of the internet so they wont support it in any way.
View 6 Replies
View Related
Feb 26, 2011
I just setup a new LAMP server (CentOS 5.5 x86_64) box with channel bonding on NetXtreme II BCM5709 Gigabit Ethernet (IBM x3650 M3). The problem is I wasn't able to connect to this server when I'm in different VLAN's. This server also unable to ping different VLAN's. But everything works fine when I transact in the same VLAN.Here's the config:
Datacenter VLAN = 9
Firewall = Disabled
SELinux = Disabled
[code]...
View 10 Replies
View Related
Jan 31, 2010
I've only been using linux for a few days so I don't know all the tricks. I'm pretty savy configuring windows networks however.My adapter is (according to windows) a: CNet PRO200WL PCI fast ethernet adapterLinux says it is a: 21x4x DEC-tulip compatible 10/100 EthernetI do seem to be getting an ip address from the DHCP router, but I cannout ping any other ips or connect to the internet.I've tried a bunch of different options, switching things back and forth, but it still doesn't work, and honestly i don't even know what some of the options mean.
ALSO, if this helps:
paladin:~ # ifconfig eth0
Eth0 Link encap:Ethernet HWaddr 00:08:A1:03:3C:99
[code]....
View 14 Replies
View Related
Oct 15, 2009
As the title suggest, I have downlaoded the latest copy of Ubuntu Server from the ubuntu website.Everything installed fine. DHCP configured ok as far as I can tell. I can ping other machines on my network (which are running Windows) and they can ping the Ubuntu machine and conenct to Apache which is running on it.If I try to ping google.com or any other domain, it gives the correct IP address but gives no response to any pings, dont telnet on port 80 (or any toher potr for that matter) on any machine on the internet. I checked the settings using ifconfig to see what DHCP had assigned, and they matched the windows machines configuration (other than the IP address obvisouly). I tried assigning a static IP, even reserving a particular IP for my NIC.
Whatever I do, i cant connect to any machine outside the network via IP or domain.I have searched everywhere and tried everything i can find on the net but still to no avail.The Windows machines are part of a domain called alcom-uk.local and run off of a Windows Small Business 2003 Server. Not sure if i need to manually setup Ubuntu to connect using a domain or anything.
View 14 Replies
View Related
Jan 21, 2010
I know this is not a win-doze forum but i always ask my questions here so here goes.I am having what appears to be a DNS problem on a friends laptop. He is running windows XP. I CAN connect to networks and even ping websites but i CANNOT browse in Internet Explorer or FIrefox.
View 1 Replies
View Related
Aug 8, 2010
I have 2 10.04 computers and one win 7 and one vista computer: The win computers can see each other and the ubuntu computers, but the ubuntu computers cannot see each other or the win machines. The ubuntu computers connect to the internet fine and can ping each other. I cannot find settings to correct.
View 3 Replies
View Related
Feb 23, 2011
This applies to my 2 opensuse PC's, my Windows PC is fine.I can ping a hostname, say "PC1" but I can not ping PC1.domain.local (even the host PC can not ping it's own FQDN). When I ping just the hostname the ping stats even list the FQDN.Onto the next issue, since all my PC's, have the domain prefix domain.local, my Synology can not. I can ping it's IP and that is it. I can resolve it's name with nmblookup just fine tho and that is what is killing me. How is this not resolving.Even weirder, I can browse to "Synology" in Network Servers under places on the slab.
View 3 Replies
View Related
May 13, 2011
Even ping google's ip address doesn't work. unknown host error using backtrack4 able to browse net with these settings.
My network settings:
What's the problem with these settings...
View 10 Replies
View Related
Jul 24, 2010
I have two machines on this network, one running Ubuntu and the other running Fedora.
When I'm using the Wireless network on the Ubuntu machine, I cannot ping the Fedora machine. Everything else works. I can browse the net fine.
If I switch over to the Wired Network then I can ping the other machine.
I don't understand why ping doesn't work only over the Wireless. I can ping the router so I'm guessing it's getting blocked by the router but I didn't block ICMP traffic.
I tried asking on IRC and they ran out of ideas too to find out where the problem is.
View 7 Replies
View Related
Aug 9, 2011
I recently bought a HP laptop which is showing some issues. To make it precise:
1. I can connect to ethernet & wireless when i am at my university, which are quite good connections.
2. At my home, i share the internet with another guy. The connection is not very stable, in the sense that, sometimes the download speed is 1MiB/s, and sometime 250 KiB/s. I have a old laptop which can connect to it without any problem.
3. My new laptop can connect to it when the connection is better with download seed ~1MiB/s, but could not connect to it when the download speed goes down.
4. "could not connect" means even ping to router takes long time with 90% packet loss. But I can always get connection and ip address from dhcp although i can not ping thereafter. This is true for wired & wireless connection both. Is that a router issue? but then, why can i connect through the other laptop.
[Code]....
View 9 Replies
View Related
May 20, 2009
I recently have just started using linux and downloaded Fedora 10 and I'm trying to figure out how to fileshare and print share with my windows vista machine.I edited the registry file on my Vista machine HKEY_ LOCAL_ MACHINESystemCurrentControlSetContro lLsaLMCompatibilityLevel and changed the level from 3 to 1.I've also gone through a lot of tutorials on editing the smb.conf file and set my workgroup name, netbios, and changed permissions on my linux machine (a Lenovo netbook) etc but thats about as far as I can get. This may sound like a dumb question but I can't even get samba to connect on my linux machine so how do I do that?
I was wondering if any of you guys can provide a solution as to how to connect or direct me to a good howto for setting up and using Samba seeing how I'm a noob.I've been on Samba.org already and I'm more confused than ever.
View 2 Replies
View Related
Dec 5, 2010
I just installed UNE v10.10 on a new netbook and I guess I've become too spoiled using the Desktop's PLACES->Connect to Server because I can't find where this is in UNE. I'd also like to "bookmark" it so I can single click to connect to "crunch20/netshare2" (I have added ip for crunch20 in /etc/hosts).
View 1 Replies
View Related
Sep 13, 2010
I've done all this config [URL] This config for the "foo" folder:
("pruebas" its a user)
Code:
[foo]
path = /home/pruebas
ready only = no
guest ok = yes
[code]....
I have the [HOME] code too, its everything fine with it, and I cant connect with another user ("alfredo") from Red Hat to Windows XP with no problem... but as soon as I double click in "foo" directory, appears this:
[URL]
Already tried to disconnect from windows the directories with "net use" but it doesn't work
View 2 Replies
View Related
Apr 6, 2010
I am using my Red Hat Linux 9 box for samba server. I want to connect samba dir with two different permissions.
View 2 Replies
View Related
May 25, 2011
I have migrated a client's server from Ubuntu 8.04 to 11.04 (they wanted that instead of debian 6 or ubuntu server, despite my best efforts)
The only service still hanging in the balance is samba. It refuses any connections to it and I can not figure out why.
Here is my conf file: (i noticed the interface line is commented out - eth0 is what the machine uses, it was commented out on the old machine and worked though)
Code:
[global]
workgroup = WORKGROUP
server string = %h server (Samba, Ubuntu)
wins support = no
; wins server = w.x.y.z
[Code]....
View 3 Replies
View Related
Jan 9, 2010
I've setup a samba server on a centos 5 machine and am trying to connect to it via a windows 7. The problem I'm encountering is that the only share I am able to connect to is the tmp share. It doesn't matter if it is a protected share or not, I always get a "network path could not be found error" when trying to open the share from windows.
View 5 Replies
View Related
