Debian :: VM Unable To Connect Outside World?
May 3, 2010host - Ubuntu 9.10VM - Debian 5.04Sun vbox$ cat /etc/network/interfacesauto loiface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet manual
[code]....
host - Ubuntu 9.10VM - Debian 5.04Sun vbox$ cat /etc/network/interfacesauto loiface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet manual
[code]....
one is whats the best way to connect to my home pc from another pc out there in the world? be on a windows or linux machine and remote into my home pc. Im using ubuntu 10.10. the other question is, i got a big family who aren't computer savvy at all. Is there a way to remotely assist them if they are on windows or mac. im looking for something similar to the windows remote assistance. With both users being able to see and control the desktop. with the hosts permission. something simple enough so it wont be a whole process to walk them threw to even get connected to in the first place.
View 2 Replies View RelatedI have installed LAMP Server and I'm using it but now I want to connect it to the Internet. I haven't static IP but it isn't problem for me to change my address when I reset my router. I have already forwarded a port(81) and inserted `listen 81` and a public site that may use it but when I type my IP address it gets Time Out Error. When I set Listen address and VirtualHost to my public ip address it got this error while starting:
`(99)Cannot assign requested address: make_sock: could not bind to address 109.110.170.200:81`.
I am using Ubunto 10-04 LTS and trying to connect to Western Digital (World Book) network drive. By signing into Mionet I am able to reach this drive on my network and remotely. Trying to run the executable resulted in the following error:
"The file '/media/Disc 1 290909/WDAnywhereAccess_3_6_0.exe' is not marked as executable. If this was downloaded or copied form an untrusted source, it may be dangerous to run. For more details, read about the executable bit."
I couldn't connect my Micromax 300G modem in Debian Linux. From internet (in Windows Vista), I came across the information of USB_ModeSwitch and then I downloaded it. While going to install it, I came across the problem that TCL-interpreter is not available in Debian Linux. Then again I restarted my laptop in Windows Vista and connected my Micromax modem and from internet downloaded TCL8.5.10-src.tar.gz. But while going to install it, I came across the problem that " configure: error: no acceptable C compiler found in $PATH " . Also as presently, I am unable to connect my modem therefore I am unable to issue the code:" apt-get update ".
View 16 Replies View RelatedI'm currently using Ubuntu and have installed debian using dual boot. In debian neither my wifi card appers nor LAN interface appears. I think during installation I'm not able to install the drivers. Can anyone help me to download the driver packages for debian (than I can download in ubuntu and then use pen drive to install in debian).onsider that I'm completely new to debian and have been using ubuntu for 2 months now and is familiar with packaging.
View 12 Replies View RelatedI'm trying to run Debian server in our network. We have SSG5 Juniper Firewall set up to route traffic from our trusted network 192.168.50.0/24 to our DMZ 93.153.125.224/28I can connect / ping all Windows servers which are in DMZ. When I try to connect my Debian server instead of one of the server's static IP I'm unable to connect or ping to it. The server itself is able to connect to internet resolve DNS if I allow connection to our trusted network I'm able to ping or connect to any computer in trusted network but still unable to ping from trusted to DMZ. The SSG5 policy is set up to allow any connection from trust to DMZ and interface is set up to route all traffic.I have tried to trace the ping It'll go through firewall right to the interface needed but then it'll time out as like the server is not connected at all.
View 1 Replies View Relatedi would like to be able to display/type all the characters/letters in my browser, character map and any other place you could think of. right now most of the languages in my character map are displayed as hex codes.
View 2 Replies View RelatedI have installed Xen on Debian. I am trying to create a virtual machine with "virtual machine manager" And it shows the following message: "Virtual machine manager Localhost (XEN) - not connected" And when i try to create a machine from command line i get the same error message:
root@debian:~# virt-install
ERROR unable to connect to 'localhost:8000': Connection refused
Traceback (most recent call last):
File "/usr/bin/virt-install", line 1033, in <module>
main()
[Code]...
I am trying to access my Debian system from a MB Pro. I believe I have all the necessary packages installed,but I unable to figure out how to actually connect, because I don't know what my hostname should be.On the Debian system, my username is jack and the hostname is aceraspire. jack@aceraspire:~$ hostnameaceraspireOn the mac terminal, I type ssh jack@aceraspire but it says ssh: Could not resolve hostname aceraspire: nodename nor servname provided, or not known.I feel like I'm missing the .edu or .com portion, but what is it supposed to be/how can I set it or find it?
View 3 Replies View RelatedI've been having a problem with Bluetooth on Debian 8 Jessie i just can't connect to any bluetooth device, i have only tested my smartphone and my bluetooth headphones, i am using blueman manager.After attempting to connect to my bluetooth headphones/smartphone it just disconnects and says "Connection Failed: No such file or directory",i don't know if i have to create a config file or something, the error message doesn't say anything but the error previously mentioned.
View 7 Replies View RelatedRecently upgraded my PC and my WiFi Hotspot connection is refusing to connect. Running a dmesg returns this
Code: Select all[66529.184299] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[66530.762594] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
And the IPv6 configuration in the Hotspot is Ignore
I am using Empathy IM client to access to gadu gadu and to message with my friends. The strange thing that is happening is that I keep on being connected and then disconnected and then connected again even if I am continuously connected to my internet connection (no problem when surfing or using skype for example)It also seems to come only from me because when my girlfriend is using the same gadu gadu on her windows laptop simultaneously, she doesn´t get disconnected (whether when she is at home and using the same connection as I am or when she is outside, meaning that it doesn´t seem to come from the whole gadu gadu network)maybe it has something to do with the ports that gadu gadu is using but it is strange that sometimes it is working for a period of time and then not and then again.
View 1 Replies View RelatedI installed wheezy on my Acer Aspire One netbook and am unable to connect to wireless networks.Output of lspci shows this as my wireless card:
Quote:
02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) I installed the firmware-atheros package to get the card up and running. Output of iwconfig shows I have a working interface:Quote:
root@netbook:/home/eric/Desktop# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bgn ESSIDff/any
[Code]...
I've been looking through the Debian wiki, searching past topics in the forum, and generally googling, but all to no avail. I'm unable to connect to the internet through any wireless connections, nor through an ethernet cable. I installed the latest weekly image of Debian squeeze. After installation, I found myself on the command line. I installed gnome with
apt-get install gnome-desktop-environment I also tried installing gnome-applets, gnome-netstatus-applet, and gnome-nettool, but I guess they were already installed. When I open System > Administration > Network in Gnome, there's no connections tab in the Network Settings application.
Here's what I think is the relevant portion of lspci -v
07:00.0 Ethernet Controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
Subsystem: Hewlett-Packard Company Device 137a
Flags: bus master, fast devsel, latency 0, IRQ23
Memory at c2000000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 2
[Code]...
I'm one of those people migrating from Ubuntu and in Ubuntu I had to add a 'rfkill -unblock all' command to my rc.local file for this laptop. Not sure if that's relevant, but thought more info couldn't hurt.
What I am trying to do is the following:
1/ I have a server (at gandi.net),
2/ I have a domain name: domain.org,
3/ I would like to be able to send/receive mail with an own mail server.
For the point 3 above, I would like to be able to do:
a/ Send from user1@domain.org to user2@domain.org
b/ Send from user@domain.org to anybody@anywhere.tld
c/ Receive from anybody@anywhere.tld
Actions a/ and c/ are working, but I am unable to send mail to the "outside world" from my mail server.
In my research on forums and google, one of the thread stated that postfix, SMTP, ... installation is extremely complex and necessitate months of reading to start to get some knowledge.
Is it true that it is so complex and that a mail server installation is nearly impossible for a newbie ?
By the way, Web server, FTP server installation was rather easy to perform.
Is do you know an easy, nicely explained, step by step and working tutorial permitting to install a mail server on Ubuntu 9.10.
I have a Dell 1505E with Debian 3.16.7 which is unable to connect to channels 12 and 13 even after changing wifi regional settings to different countries (using iw reg set).12 and 13 are legal to use in the UK. What should I do?
Code: Select allsudo lspci | grep -i wireless
02:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
Code: Select alllspci -vv -s 02:00.0
02:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01)
  Subsystem: AzureWave Device 2047
 Â
[code]....
I'm trying to do a net install with the latest release of debian - but my ethernet card is not recognized/the drivers are not available because I have a card that requires a linux kernel version of 2.6.35. This is obviously a problem because I can't download any additional packages, and I can't update the version because I'm not able to connect to the internet. I have installed it, but it's only text (which I assume is because I could not install the graphical interface, correct me if I'm blaringly wrong here). So what can I do to install debian on my laptop and be able to use my Intel Centrino Advanced-N 620 network card?
View 14 Replies View RelatedI tried to install vsftpd on my server and while the installation went fine, I can't run
Code:
restart vsftpd
As I the get error
Code:
restart: Unable to connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory Though I'm able to restart the service with
sudo /etc/init.d/vsftpd restart with a warning telling me to use the service utility. Not only that, but despite the port being open it won't allow me to log in, it just hangs, and I have local users enabled (I've used the default .conf file). Does dbus not come installed in 10.04, and if I did install it would it make a difference for restarting the service? Are there further steps needed not available in the tutorial on the Ubuntu Server Guide for 10.04 to enabling local user authentication? -edit- Figured it out, dbus wasn't installed, vsftpd is working fine now.
I install and configure the vncserver following and reading 1000papers, but all of this present the same problem; when i try to connect to my vncserver,recive this mesage: unable connect to socket: No route to host (113) The OS version is Fedora Core 14 and tigervnc-server i try different solutions including:Allow TCP connection modifing files /etc/gdm/custom.conf and /usr/share/gdm/gdm.chemas Disable SELinux removing iptables Here follow the vncserver configuration:
[code].....
The ip address of the vncserver is correct because i can do ssh on it. Where or what can i do?
I'm trying to setup PS3 media server on my new OpenSuse 11.2 and I'm being unable to connect to the PS3. The multimedia server seems to being working ok, only it has not appear on XMB.
I've been searching on PS3 Media Server forums and try a couple of solutions regarding /etc/hosts and adding full qualified domain name of server to it, but it doesn't seems to work.
I am unable to connect to wireless network in ubuntu 10.10.i have noticed that the iwlagn driver isnt been used by anything.
View 9 Replies View RelatedI am trying to setup a dhcp server for my internal network. I have two NICs, a modem, and a wireless router. I have my server connected directly to my modem which is providing me with Internet access on eth1 and is working fine. I have dhcp and dns setup on eth0 which is connected to my router. The router shows that it is connected to the Internet but when the router gives a client computer an IP address, the client is unable to connect to the Internet but can connect to the router. I will post my configuration files below with my current configuration.
[Code]....
Is it possible to prevent "unable to connect" messages from appearing instead of blocked web-content? I am using a huge hosts file to block unwanted web content from appearing. The attachment illustrates what I am referring to.
View 3 Replies View Relatedhow to install "world of padman"?
View 7 Replies View RelatedI just switched from Ubuntu to Fedora 13 because I was unable to get Ubuntu to connect to wireless networks. I tried everything suggested in help and forums, and kept getting "Bad Password" with WICD and Network Manager. Now, with Fedora...I still can't connect.
Problem #1: The guide says to "...make sure that the relevant wireless interface (usually eth0 or eth1) is controlled by NetworkManager," and that I do this via: System>Administration>Network
However, there is no Network option under System>Administration.
Problem #2: I open Network Manager, which displays a list of networks. I click on mine, configure it with WPA and the right password, and it fails to connect: "The network connection has been disconnected."
I'm a new debian user. I install a Debian in Virtualbox, and try to connect to the source list to update, but it can't connect to the server, while network and internet connection works. This is my sources.list
deb http://ftp.rediris.es/debian/ squeeze main
deb-src http://ftp.rediris.es/debian/ squeeze main
deb http://security.debian.org/ squeeze/updates main
deb-src http://security.debian.org/ squeeze/updates main
deb http://ftp.rediris.es/debian/ squeeze-updates main
deb-src http://ftp.rediris.es/debian/ squeeze-updates main
I am using Squeeze and all appears OK at first... I have a DHCP lease, PING to router works, apache servering fine in and outside the network, Epiphany seems to connects to default debian.org only, BUT I cannot connect to any other websites and apt will not connect to any servers. I installed once, tried to fix problem, gave up and reinstalled and still have the same problem.
I unistalled Network Manager thinking that was the problem, but still the same issue. Is there a default firewall blocking certain connections or am I missing something I'm supposed to know about? I installed some non-free firmware in the beginning of install and all worked... and I connected fine when downloading packages during install.
I'm trying to connect to the internet on ubuntu, but what ever i do fails. I've tried every thing i possibly can, and when all else failed, i had to come and ask. When i try to connect to the internet, it always says "unable to connect". I have no clue why. I'm choosing the default wired setting. To the side of it, it says never, so that might be the problem?
View 3 Replies View RelatedIn my lan environment i've configured a server with rhel5 and a desktop with fc12.I was unable to ssh between rhel5 & fc12. when i'm trying to login through ssh i was getting following error
[code]...