This application is made available for Fedora and gentoo, but not for Debian. Is there someone looking for maintaining it?
http://ytm.bossstation.dnsalias.org/html/kydpdict.html
Here please find the packages to install it on debian testing:
libqt3-mt_3%3a3.3.8b-7_i386.deb http://packages.debian.org/squeeze/libqt3-mt
kydpdict_0.9.3-1_i386.deb http://download.ubuntu.pl/_Dapper_Drake/kydpdict/
Added the following line to sources.list:
deb [URL] squeeze main non-free
After that I did an update and upgrade.
The following packages were kept back : ffmpeg libavcodec52 libavdevice52 libavformat52 libcairo2 libpostproc51 libswscale0 mplayer ( libcairo2 is on hold ).
To overcome this I did: apt-get install mplayer
The following extra packages will be installed:
liba52-0.7.4 libartsc0 libbs2b0 libdirac-decoder0 libfaac0 libggi2 libggiwmh0 libgii1
libmp3lame0 libopencore-amrnb0 libopencore-amrwb0 libvdpau1 libx264-104 libxvidcore4
It ends like: Unpacking replacement mplayer ...
dpkg: error processing /var/cache/apt/archives/mplayer_2%3a1.0~rc3++svn20100804-0.0_amd64.deb (--unpack):
trying to overwrite '/usr/share/pixmaps/mplayer.xpm', which is also in package mplayer-gui 2:1.0~rc3++final.dfsg1-1
dpkg-deb: subprocess paste killed by signal (Broken pipe)
Processing triggers for man-db ...
Processing triggers for menu ...
Errors were encountered while processing:
/var/cache/apt/archives/mplayer_2%3a1.0~rc3++svn20100804-0.0_amd64.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
Next thing I tried : apt-get dist-upgrade:
The following packages will be REMOVED:
libavfilter0
The following NEW packages will be installed:
libavcore0 libavfilter1 libavutil50 libva1
The following packages have been kept back:
libcairo2
The following packages will be upgraded:
ffmpeg libavcodec52 libavdevice52 libavformat52 libpostproc51 libswscale0 mplayer
Preparing to replace mplayer 2:1.0~rc3++final.dfsg1-1 (using .../mplayer_2%3a1.0~rc3++svn20100804-0.0_amd64.deb) ...
Unpacking replacement mplayer ...
dpkg: error processing /var/cache/apt/archives/mplayer_2%3a1.0~rc3++svn20100804-0.0_amd64.deb (--unpack):
trying to overwrite '/usr/share/pixmaps/mplayer.xpm', which is also in package mplayer-gui 2:1.0~rc3++final.dfsg1-1
dpkg-deb: subprocess paste killed by signal (Broken pipe)
Processing triggers for menu ...
warning, in file '/var/lib/dpkg/updates/0006' near line 5 package 'libavcore0':
missing description
warning, in file '/var/lib/dpkg/updates/0006' near line 5 package 'libavcore0':
missing maintainer
warning, in file '/var/lib/dpkg/updates/0015' near line 5 package 'libavfilter1':
missing description
warning, in file '/var/lib/dpkg/updates/0015' near line 5 package 'libavfilter1':
missing maintainer
Errors were encountered while processing:
/var/cache/apt/archives/mplayer_2%3a1.0~rc3++svn20100804-0.0_amd64.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
root@debian:/home/chevy# aptitude full-upgrade
The following packages will be upgraded: libldap-2.4-2 time 2 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 243kB of archives. After unpacking 53.2kB will be freed. Do you want to continue? [Y/n/?]
[code]...
I Installed Cinelerra on my 13.37 64 machine , compiled OK with all dependencies Here is the deal breaker its totally dodgy crashes on any file and is just basically unusable
Or someone give me a working slackbuild that's less flacky Now is this normal for Cinelerra or is this Slackware related or is the build just old Tried to contact the slackbuild maintainer but have yet to receive a reply
I chose the local version of grub when prompted on the last update. However, after doing a bit of reading, it looks like I should have selected the "package maintainer's version" .
I've looked at the release notes [URL] related to grub and changing the menu.lst. However, when I open the menu.lst per the instructions, it is blank (the file opens but there is no text in it). I also ran the sudo update-grub command but was never prompted to choose a the local version or maintainer's version.
Is there a way to go back and get back to the prompt to select the ""package maintainer's version"?
Happens on Jessie AMD64 with mate, I can't go to a tty to kill mate system monitor, mouse stop working, keyboard stop working. I tried changing the theme, and now it freeze opening mate system monitor.
View 0 Replies View RelatedI have been trying to install a command line Debian Squeeze system on n Eee PC 701., but have run into a number of problems:
1) All install info I can find assumes that the person wants to install a GUI system of some sort.
2) The Eee PC has a unique 2 MB. partition that needs to be preserved, so no guided install.
3) The Eee PC has an SSD instead of an HD. Most postings I have seen recommend an install without a swap partition, but the install (both live and text) seems to choke and despite a fresh formatting of the existing partition, claims to be overwriting existing files.
4) I can understand from the wiki that the Eee PC wireless driver (Atheros) should be included in Squeeze, but when the wireless connection and password is added, the installer claims that the password is not correct, despite me having checked it a number of times.
I hope someone can help me out. I just want to use the Eee PC for low resource stuff done on the cli like using a text based web browser to access the net through a wireless router and to hook it up to an external USB HD and to my stereo, to play my music collection.
I am thinking about creating a Debian Live CD with only the base system. I would like to know how to make the CD bootable so that it can load the kernel and continue with the booting sequence.
View 12 Replies View RelatedI have been learning Debian by using a virtual machine. After fine-tuning my installation procedure, I decided to copy that installation to my physical system. The hard drive already has another Linux based system installed. I plan to dual boot.After copying files I updated fstab and menu.lst.
The partition scheme between the virtual and physical environments are similar, but the partitions are not mapped exactly the same.Thus the Debian system on the physical hard drive fails to boot. I think the initrd created in the virtual machine is looking for the root file system on /dev/hda1 whereas on my physical drive the new location is /dev/sda7.How can I rebuild the initrd on the physical system? Or how can I build an initrd in the virtual system that will function on the physical system.I started to use the installation DVD in rescue mode, but I did not get too far.
Once in kde, after an undefined time (can be minutes or hours), mouse cursor start to have a fixed shape (if i am in iceweasel on a link, the mouse can get locked with the hand shape). In this state, the mouse cursor can still be moved, but no program can be launched or closed (X) in kde. I still can launch a new console now (ctrl+atl+F2), "ps" don't show any process consuming cpu (all processes are near 0). "sensors" shows 55*C. Other commands as "kill" going to lock, they don't work and at the same time they don't return the cursor to the shell.
View 14 Replies View RelatedHow does the 'testing' version of Debian stabilize? I mean, the updates from upstream are very frequent, so if the Debian maintainers upgrade a package till the very end (for e.g if they just upgrade to 2.6.36), when will they get time to test it (so as to freeze it)?
View 7 Replies View Relatedi install debian 8.2 on my laptop(ASUS G751jy) it install perfectly without any error on dual boot with windows 8.1 but debian not boot show some line and then nothing ! (attached image )it seems can't load driver of wifi Bluetooth and trackpad but kernel driver (iwlwifi) support my wifi/bluetooth card
wifi/bluetooth model: intel dual band 7260.
Gnome is my preferred desktop but would also like to use KDE. My question is:
If I install both Gnome and KDE on the same system, when using Gnome I suppose I'd get all the KDE stuff and vice versa making for an overcrowded desktop. Is it possible to have both environments on the same system without this happening?
Put another way, if a computer has two users and one uses KDE and the other Gnome, is there no way to separate the two environments?
After upgrading the kernel to 2.6.38-2, my system can't boot up. It hangs after "Waiting for /dev to be fully populated."Hhave to revert to the last version before upgrade which is 2.6.32-5.
View 2 Replies View RelatedI have been using Ubuntu 10.04 for some time but as its no longer supported, I need to consider my options. One of the things I really liked was the panel shortcuts to Applications, Places and System.
I am considering installing latest Debian but see that "System" is not included in the panel. So my question is can this be added?
I just installed debian and I need to know where I can find information about my current installation is it x32 or x64. I an sure that my current hardware is x64 but I'd like to know the current OS type.
View 1 Replies View RelatedI am install torrentflux and i can login from debian but i cant login from another system (ip), i just get blank page when i type URL...
View 3 Replies View Relatedbut I tried to resolve all forms and failed. Want to add some aliases to my system, I put the snippet below in my /etc/profile but nothing happened. Also tried to put in ~/.profile and ~/.bashrc but nothing worked.
What am I doing wrong?
## /etc/profile
# Section my own aliases
alias cp="cp -ip"
alias mv="mv -i"
alias rm="rm -i"
alias grep="grep --color -i"
With my windows pc, system restore made regular back up points. i could revert to a point in time or restore the whole system from scratch. the only prob was if thoes files got a virus you lost everything anyway. Not so good ill admit.With linux, ive spent several hours setting up wireless, sound and games. i dont want to loose all that time if something happens. being new to linux i dont see a back up feature or a way to save the current configuration i have. id hate as a new user to make a stupid mistake and blow the system and loose all my hard work any suggestions? id like to back up the system as it is so i can restore /copy back this set up if possible. whats the tool to use? does it exist in linux?
View 8 Replies View RelatedI want to install nfs,ssh and then mpi on the debian
how i has to do that?
because i want to run mpi programs on a cluster
I have upgraded my server to Debian 6.0 Squeeze but it looks like some of my sites are not compatible with PHP 5.3.x so I would like to revert to previous 5.2.6 version.So my question is what to do?a) Remove PHP 5.3.x from system via apt-get and install my old 5.2.6 from old archives at /var/cache/apt/archivesb) just try to update from archives PHP to 5.2.6?
Code:
-rw-r--r--. 1 root root 2413316 May 11 2008 libapache2-mod-php5_5.2.0-8+etch11_i386.deb
-rw-r--r--. 1 root root 2413290 Oct 6 2008 libapache2-mod-php5_5.2.0-8+etch13_i386.deb
[code]....
I want run 32 bit software on 64 bit linux debian.
I install ia-32lib but my 32 bit software not work?
what do i do?
ow Debian init system is organized actually (btw i am using stretch) ? I see systemd installed, with some services run from it (systemctl shows a small list), but at the same, i still see /etc/init.d full of traditional init scripts.
View 3 Replies View RelatedI'm trying to install zoneminder on my system (Debian 8 Jessie). I was trying to follow a guide on puccinellidigital, since I use nginx on my machine.
everything is OK, but I can't get the xinet to work
Code: Select allservice xinetd status
Code: Select all...
Oct 09 14:24:39 donnager xinetd[1102]: service/protocol combination not in /etc/services: zms/tcp
...
But if I check
Code: Select allcat /etc/services |grep zms
Code: Select allzms-inetd 85/tcp
# Zoneminder ZMS inetd-wrapper
I had noticed that my workstation (running debian testing) is having a constant load of about 0.9 (+/-0.1), even while the system is completly idle.The system starts with a normal load and then goes up to about 0.9 within a few minutes and then will stay there forever (well it can get higher, but never lower). This is the load graph after the system runs some time: URL....
I have tried everything I know to find the cultprint but there is no cpu usage and no io usage. I even have disabled the desktop and still have this problem.Also I have tried booting an older Kernel (4.1 and 3.16) with no difference in the load.Here is some information about my system:
Code: Select all» uname -a
Linux localhorst 4.2.0-1-amd64 #1 SMP Debian 4.2.3-2 (2015-10-14) x86_64 GNU/Linux.
I've got a bit of a problem. I'm looking for a English wordpower dictionary, which is up to date. I am already using Stardict (CZ-EN, CZ-RU, acronyms).
I have tried google, but he didn't show anything specific.
I have enrolled some certificates from my own ca, to use to a couple of different services, like FTP, WEB, Mail etc. All these certificates comes from the same CA (my own), and I have created a root CA. But is it possible to import this root CA to the whole system, so I do not have to import the certificate or root CA to the different applications like iceweasel/firefox, chrome, icedove, filezilla etc.
View 2 Replies View RelatedThere is a package in Linuxmint called mintbackup. What this tool
does is somebody can use that, make a backup of his packages and use
it on some other machine to make an identical copy as the first one.
Does anybody know :-
a. How to install mintbackup on Debian ?
b. If not, does anybody know of a similar tool to mintbackup in the
Debian Universe ?
http://www.ubuntuhq.com/content/install ... ubuntu-ppa
Also saw a fork/rewrite of the same tool on linuxmint forums. http://forums.linuxmint.com/viewtopic.p ... 18b600ac50
I've got a Lenny system on a quad core system with 4GB of ram. Currently Linux www 2.6.26-2-amd64 #1 SMP Thu Nov 25 02:05:44 UTC 2010 x86_64
I've had it for a couple of years, and its been fine, very fast and reliable.
Lately, its got a problem: after its been running for a day or two, access using SSH, or TLS/HTTPS gets really slow. Painfully slow. A reboot returns the system to normal fast operation.
I can't think of anything that has changed, other than I got a new SSL cert and installed it.
The system is mostly a vanity domain server, with Apache HTTPD running a half dozen very low volume services. Its running bind9, mysql, and a few other things, nothing big, nothing that would load down a quad core with lots of ram. The disk is only 14% used.
I supposed to install a server (mail,dns,dhcp etc) but we need to record all the steps that we're doing, thats why i decided to setup a virtual machine and record everything with Xvidcap (which works great by the way).
The problem:
Now we need to test this server at school which means i have to take my computer to school and setup up a network overthere, whats the big deal about this? my computer case is a huge xclio a380 which weights about 35lbs (not kidding) so taking this thing to school riding a bus 3 hours to get there every weekend is not a good idea.
Is it possible to make a copy of the entire system and put it on a laptop?