Debian :: Load On Idle System
Nov 2, 2015
I had noticed that my workstation (running debian testing) is having a constant load of about 0.9 (+/-0.1), even while the system is completly idle.The system starts with a normal load and then goes up to about 0.9 within a few minutes and then will stay there forever (well it can get higher, but never lower). This is the load graph after the system runs some time: URL....
I have tried everything I know to find the cultprint but there is no cpu usage and no io usage. I even have disabled the desktop and still have this problem.Also I have tried booting an older Kernel (4.1 and 3.16) with no difference in the load.Here is some information about my system:
Code: Select all» uname -a
Linux localhorst 4.2.0-1-amd64 #1 SMP Debian 4.2.3-2 (2015-10-14) x86_64 GNU/Linux.
View 7 Replies
ADVERTISEMENT
Jan 12, 2011
I keep noticing disk activity every roughly 1 to 3 seconds even though there is "nothing" going on. Of course, I run a number of "system" and "user" application packages - Apache2, MySQL, Browsers (Opera, IceWeasel), an SMB client and server, OpenOffice 3.0RC8 being the most prominent ones. I wonder what might be the cause for this constant disk activity which happens even when none of the applications do any noticeable work at all. Is there a way to determine the process that does those disk read/writes?
View 6 Replies
View Related
May 5, 2010
Since upgrading from 9.10 to 10.04, my system is noticeably less responsive and exhibits halting behavior for at times 10s of seconds. There is nothing obvious in the various logs that I can find. The only objective indication I can find that demonstrates that something is seriously wrong is that my load average never drops below 0.5 and is often over 1.5, even at idle. In this situation, top/ps/whatever shows very few processes running (usually just top). This suggests to me that either the new kernel scheduler is horrible or that something new is resulting in blocking I/O or other uninterruptable sleeps.Typical top output:
Quote:
top - 12:18:01 up 1 day, 49 min, 5 users, load average: 1.42, 0.86, 0.71
Tasks: 262 total, 1 running, 261 sleeping, 0 stopped, 0 zombie
Cpu(s): 0.9%us, 0.8%sy, 0.0%ni, 97.6%id, 0.0%wa, 0.0%hi, 0.7%si, 0.0%st
[code]....
View 9 Replies
View Related
Oct 27, 2010
Can anyone explain the difference between IOWAIT%/IDLE%/LOAD AVG? We have a 3 servers (oracle rac) attached to a SAN. When we added another CPU to our 3rd server, the IOWAIT across the oracle rac dropped a lot. We used to get pretty high IOWAIT % before. So I don't really understand how the extra CPU could do this. I thought the IOWAIT % is high because the server is waiting for the SAN, so I thought the SAN was the bottleneck. So I don't really understand the difference between the 3 things (iowait, idle and load avg).
View 1 Replies
View Related
Dec 7, 2010
I recently upgraded from Fedora 11 to Fedora 14 on my Dell Latitude E6400 notebook PC. It's a Dual core processor, as seen in the uname provided below:
uname -a:
Linux COMPUTERNAME 2.6.35.6-48.fc14.i686 #1 SMP Fri Oct 22 15:34:36 UTC 2010 i686 i686 i386 GNU/Linux
redhat-release:
Fedora release 14 (Laughlin)
Since the upgrade, I've noticed some unexplainable behavior: The load average is consistently 0.5 - 1.75 when my PC is completely idle (99% according to top). No processes are in the D (I/O) state, and I have no Zombie processes. This happens on a fresh boot, every time. It gets worse and less worse, and bounces from unusable (cursor stops moving as I type in the terminal, to actually losing keystrokes at times). I'm wondering if anybody else is experiencing similar issues, or knows of a (the) kernel bug which is causing this behavior? Actively researching the issue. I've come across the following: Tens of wakes per second in "[kernel scheduler] Load balancing tick" on Core 2 Duo even with only 1 core enabled
[Code]....
View 3 Replies
View Related
Nov 26, 2010
I am having a problem with the server that I use to host my personal site. The load average quite often spikes to exceed 1.00 for the 1 and 5 minute intervals, and the 15 minute interval gets above .5. This occurs while the server is idle, serving very few or no requests and with the CPU 99% idle with <1% IOWAIT usage. I have checked top and vmstat, but neither one provides any useful info. Top continues to say the CPU is 99% idle, and vmstat says that there are 0 runnable and 0 blocking tasks. Occasionally, vmstat will say that there is 1 runnable task, but this doesn't even coincide with the load average spikes. I have already searched for other solutions to this problem, but everything I have seen says to use top and/or vmstat, but those aren't showing anything out of the ordinary. Can anyone recommend anything else I might do?
My server has a Pentium 4 HT 3gHz processor, 2GB RAM, and runs Kubuntu 10.10. (The reason it runs Kubuntu instead of Ubuntu Server is that it needs an X environment so that the Nvidia driver can initialize and put its graphics card into a power saving mode.)
View 8 Replies
View Related
Oct 15, 2015
I upgraded the distro (Strecht - Testing) and the result was almost the same mentioned by mittgreen, when I boot the system it fails to load the X, ending in the "oh no something has gone wrong" screen.Now, the only possible way to use the GUI is to start it manually by startx command. Reading the Xorg.log I saw a "No screens found" error.
View 1 Replies
View Related
Apr 8, 2011
Torrents client kills my Internet connectivity so bad I can't even use a web-browser whilst it's on -- pages take like five minutes to load -- I often forget to turn on my torrent client. Which led me to wonder if there's a way I can launch a script on system idle?
View 1 Replies
View Related
Apr 5, 2010
I want to get the system idle time till a mouse move or a key press. How is it possible to get it from a char terminal running through ssh/telnet as well as a from an X-terminal session?
View 1 Replies
View Related
Mar 15, 2015
I really don't like GADMIN-SAMBA, and want to load the graphical tools I used previously on my homebrew Samba box I have at home (used to have Squeeze on it).
Have amd64 Debian 7.8 installed on a slimline HP Compaq PC ...
View 1 Replies
View Related
Jun 11, 2010
I had a dual boot on my dell mini inspiron for win xp and linux debian. Due to some issue with windows, I needed to reinstall it and remove debian. From within debian's inbuilt GParted, I deleted the partition containing windows, and now my system will not load any bootable CD (whether winXp or Gparted live cd). Everytime I restart the system with a bootable Cd, it still takes me into debian automatically.how to reformat my hard drive by deleting linux partitions and re-install winxp from bootable cd.
View 1 Replies
View Related
Mar 22, 2010
I was messing around with Compiz today and it got me to wondering if I can create a custom command when my system goes to idle, instead of launching the screen saver. I want to start the Compiz Rain effect on system idle. is this possible?
View 2 Replies
View Related
Aug 5, 2010
I'm trying to write a script to run motion when the computer is idle but for some reason the script I found online doesn't work. I tried to write a simple command to put some echo in a file when the screen server starts and stops but this doesn't work also. this is the script I'm using -
Code:
#!/usr/bin/perl
#open (IN, "$cmd |");
my $cmd = "dbus-monitor --session "type='signal',interface='org.gnome.ScreenSaver',member='SessionIdleChanged'"";
[code]....
View 1 Replies
View Related
Jun 18, 2010
GNU/linux kernel 2.6, Slackware 12.0
Every now and then, say with a period of one hour, the system begins accessing the hdd and doesn't stop accessing for at least 5 minutes. What can be the reason? Can it have something to do with the swap partition?
View 2 Replies
View Related
Mar 22, 2011
When I run top d 0.5 on my machine and I press 1 to enable the SMP View, I notice that all of the CPUs keep toggling between 100%idle and 0% idle.
The odd part is that when a CPU goes to 0.0% idle, I would expect to see one or more of the other columns peek, but they are not.
What is causing this?
Code:
View 8 Replies
View Related
Feb 17, 2011
i used to download files using transmission bit torrent client. I download the torrent and once the download starts i will leave the system and check only after 4 or 5 hours later.But when i check the system again, the network connections were automatically disconnected.The download is getting stopped naturally. why my wired network connection is getting disconnected automatically if the system is idle?(ubuntu 10.10)
View 1 Replies
View Related
Oct 3, 2010
I'm writing a post-install script to run on the computers I'm working with. Most of it is written, but I'm a noob when it comes down to it. I'd like to know how to disable the system from showing the lockscreen after being idle. Could someone show me how to do this from the command-line? Ubuntu 10.10 Maverick Meerkat
View 3 Replies
View Related
Dec 1, 2009
My Gnome screensaver doesn't work, although it once did.
I have searched for a solution to this problem but no luck. I am running FC 11 and out-of-the-box gnome. At first the screensaver worked normally, shutting off the screen after 5 mins. Now it does not do so. I found the following command line suggestion in the forums, and it looks like it may point to a problem -- the screensaver is inactive, but how to make it active? I may be misunderstanding the term inactive, of course. Logically, the screensaver would have to be inactive if I am typing a command.
In any case, the query command shows:
Just in case the screensaver really was not running, I tried this command (which I found in another post):
But the query returns the same thing as before.
The only thing I can think of that might be an issue is that using the "appearances" background facility I added a couple dozen pictures that I thought I might use as screen background. Not long after that I discovered that my screen did not go black after 5 mins as expected. Not sure this correlation has any causal meaning, however. I then tried various things, finally returning to the plain (blue) default. That seemed to fix it for a short while, then after a couple of days, the bad or non-behavior returned -- the screensaver does not work.
(update -- I removed all the extra background pics and it makes no difference.)
My system runs all the time, but I don't want the screen to be on all the time.
View 4 Replies
View Related
Jun 14, 2011
How to make the system boot faster by removing the idle time between 5s to 10s? bootchart attached. It is Ubuntu10.04LTS by the way. One more hint, the screen black out for ~4s after "Begin: Running /scripts/init-bottom... Done." I don't know what is going on during that 4s, but my best guess is there is a way we can get rid of it.
Bootchart can be found here:
View 9 Replies
View Related
Apr 3, 2011
My hard drive all of a sudden starts to read and write all on its own for around 15 seconds at a time while at idle or while I am just browsing the net. At first I thought it was from cron running but I have that disabled.
View 3 Replies
View Related
Apr 14, 2010
I boot it and let him stay alone without even log-in,then thru my local LAN I access the server with SSH or FTP, everything just works fine,but if I just let the server idle for a while, I stop being able to login to the server again.I get no response, and when I go check it , monitor is black, like its sleeping,Then I just press a key on the keyboard, it wakes, and I can login from the server itself.so it does not crash.But login from another computer still doesn´t work,I have to reboot the Linux server to work, and all this idle thing starts over again.
View 3 Replies
View Related
May 17, 2011
This is my first day with Debian, I have used other distros, and am a long time linux user. My HP D 1600 series is recognized, but when I try to print a test msg. it says sent, but the printer remains idle. I have tried everything I know. When I run the trouble shooter I get this. /// /usr/lib/cups/backend/hp failed////
In the past when having a printer problem I have installed HPLIP-gui and removed the printer then re-installed it. That has not worked and I cannot even remove the printer.
View 10 Replies
View Related
Jul 29, 2011
I am a newbie when it comes to linux, but know a little (the little bit of dangerous stuff).I have set up a home web server for when I am testing website using PHP, mysql and other funky stuff. This is a reflection of my production server as far as I can with my limited knowledge.I am also using this box to learn more about the Linux operating system and I doing this slowly. Before I installed the GUI (Gnome) I was using a text based server, this was working fine and running absolutey fine and never disconnecting. This has been fine and working 24/7 for around a month.
At the weekend (just gone) I ran the following at terminal
# apt-get install gnome
This gave me a GUI so I could try some other things.
When the computer is idle the network card seems to drop the connection, Im trying to see after how long it does this. I have seen this work fine after an hour, but after a night, the network has been dropped. This is a hard wired connection to the router.first time I thought the PC had froze so rebooted the PC, but the second time, I plugged a mouse into it and noticed the the network icon had changed, after right clicking on it, i noticed that It had dropped the connection. After clicking the "reconnect" option it is back up and running.
View 6 Replies
View Related
Apr 13, 2011
I just installed Debian 6.0 IA64 on my HP zx6000 and it pegs the CPU's when doing absolutely nothing but sitting at the desktop. I searched around on Google and found that there is a bug report: 537572. I was just wondering what the status was on that. Is there currently a fix or workaround?
zx6000 specs: 2 x 1.50GHz Intel Itanium 2 (Madison 6MB), 8GB of PC2100 ECC, 73GB 10kRPM SCSI, NVIDIA Quadro4 900 XGL 128MB.
View 8 Replies
View Related
Dec 28, 2015
I am trying to switch over my NAS from Win7 x64 to Debian 8.x Jessie. I have run into a few issues with the power management. When Idle my NAS should be consuming 25W, however it was consuming much more. The more hard disks I mounted, the higher the wattage.
I have followed a few tutorials but that has only been a partial succes.
Code: Select all # hdparm -C /dev/sd[b-y]
/dev/sdb:
 drive state is: active/idle
/dev/sdc:
 drive state is: active/idle
/dev/sdd:
 drive state is: standby
/dev/sde:
 drive state is: active/idle
/dev/sdf:
 drive state is: standby
All the drives can spindown but they are not doing that now that they are mounted.
hdparm:
Code: Select all/dev/disk/by-id/ata-SAMSUNG_HD103UJ_S13PJ9AQC12015 {
apm = 127
keep_features_over_reset = on
spindown_time = 60
[Code]....
Now there are two suggestions I found but both I was unable to implement.
The first suggestion was to mount using "noatime". However I do not know how to rewrite fstab because I am using ntfs for now (at least untill I get it working).
Code: Select all# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
#
/dev/mapper/bugattidebian--vg-root / ext4 errors=remount-ro 0 1
[Code] .....
Not sure where to add the noatime there...
Also I am using samba on all those drives. This guide suggested a code change but the example does not line up with my configuration script.
View 6 Replies
View Related
Apr 20, 2011
i've just installed squeeze on my lenovo t61 laptop. i've noticed one of my cpu's running at 100% (even in idle) from time to time.
View 3 Replies
View Related
Jul 11, 2015
I'm having some problems with banshee that started about 6 months ago. Banshee remains idle and does not play any type of music file. I've tried installing and selectively installing Gstreamer codecs with no success. I'm running stretch.
View 8 Replies
View Related
May 29, 2010
i've gotten my fedora 12 to the point where i can run python3 scripts from command line and can call up python 2.6.2 idle with the command 'idle' from command line. what command will call up python3 (3.1.2 to be exact) idle?
View 5 Replies
View Related
Oct 30, 2010
I restored my laptop to an image created the 1st time I used the laptop. Since restoring the system won't load. After the initial boot screen and check to boot from cd it just resets. It never makes GRUB menu were I can choose the OS I want. I'm dual booting Vista and ubuntu but can't get into either.
View 9 Replies
View Related
Oct 16, 2010
I want to upgrade to 11.3 but save my desktop and settings from 11.0. How can I do that?
View 3 Replies
View Related
