CentOS 5 Server :: Postfix And Hosts File - The Mail Server Could Not Deliver Mail
Mar 20, 2011
I've setup my server by following a ton of goods, and it seems to work ok, but I need to start using my server for email in order to receive orders placed via my website. I've followed this guide - [URL] I followed the steps above, and tested the mail server via telnet, and all seemed to be ok. I tried sending an email via Squirrelmail, from cs@thinclientwarehouse.co.uk TO my working email simon@c1systems.co.uk, but the server returned with the following message:
<simon@c1systems.co.uk>: host mail.c1systems.co.uk[95.128.128.129] said: 550-Verification failed for <cs@localhost.thinclientwarehouse.co.uk> 550-The mail server could not deliver mail to cs@localhost.thinclientwarehouse.co.uk. The account or domain may not exist, they may be blacklisted, or missing the proper dns entries. 550 Sender verify failed (in reply to RCPT TO command)
View 14 Replies
ADVERTISEMENT
Jan 21, 2011
Can this be done? A company is currently running a postfix mail server. They got a new server and, while the users are migrated, they need to have the messages delivered on BOTH servers.
I thought it could be easily done in postfix: deliver locally AND forward mail to new server, but all solutions I found would deliver the messages in just ONE place.
View 1 Replies
View Related
Oct 6, 2009
I would like to setup postfix to act as a relay for the outgoing mails of a couple of servers each serving it's own domain.The mails we are talking about are standard administrative emails like user registration, password reset request. The volume of those mails will naturally grow as the site grows. Which for me poses the problem that depending on the growth of the site you will sooner or later hit the quotas imposed by (my otherwise preferred) providers like GMail or smtp.com.
So what I need is a mail relay that will only accept mails from authenticated clients from hosts in its access list and relay their mail without restrictions. Is that possible with postfix? What has to be changed in the config and what are the pitfalls?
View 1 Replies
View Related
Nov 3, 2010
I have a problem relate to posttfix.I want to mirgare postfix mail server to exchange 2010 mail server but I can't do it,u can help me.You can show me have to do configure postfix and exchange how to?
View 1 Replies
View Related
Oct 4, 2010
so i set out to change the default smtp port the server uses because my ISP blocks port 25 and i need the email to work in outlook. this morning i could receive email, but not send it. so i did some research and thought that i needed to edit the master.cf file in /etc/postfix/ by commenting out this line: smtp inet n - n - - smtpd -oand replace it with587 inet n - n - - smtpd (587 being the port i want to use)somewhere along the lines postfix server stopped running and now i cannot get it to start.if i try using SSH it crashes immediately and if i restart it in simple control panel nothing happens
View 7 Replies
View Related
Jul 27, 2010
I have setup a postfix mailserver and it seems to be working ok, we are only using this to relay mail to our forum users. Its not being used to recieve any email only send them out to the internet.
What is the difference between the mail.log and mail.info files? Can I turn one or both off? I see alot of messages like...
Just wondering what this string of log entries means? Also I am getting duplicates in the syslog file as well.
View 2 Replies
View Related
Aug 6, 2010
Two exchange servers internally. One is setup for example.com (192.168.1.10) and the other is setup for example2.com (192.168.1.20) Both are behind a single public IP.
I want to use postfix to sit in front of the two exchange servers. Postfix will accept mail for both domains and relay to the appropriate server. I have postfix installed with only defaults at this point.
View 2 Replies
View Related
Nov 19, 2010
I'm running SUSE linux Server version 11. I want to configure mail server with postfix & cyrus-imap. For that, i have read many documents in Internet by i met issues. I'm running DNS in this server & it's ok Now I cannont send mail through command line.
[Code]....
View 9 Replies
View Related
Mar 17, 2011
I am researching the CentOS Cluster Setup. Does anyone know of a guide on this or have a thread linked that I can look at? I want to build a small cluster and then be able to add to it as it grows. Mainly I want to have web hosts, data, and mail behind it. The DNS will probably be on there own.
View 5 Replies
View Related
Oct 31, 2010
i was asking how to build a CentOS Exim mail server, & gaurantee that all mail messages will be delivered to hotmail inbox ??hotmail said that it will only accept 500 simultanuos connections (=500 messages) to its mail servers from only one IP address, so is there an exim options that i can use to limit messages that sent through the mail server to hotmail to be sent as 500 messages then send another 500 & so on
View 2 Replies
View Related
Oct 2, 2010
Having my Diploma Final Project on setting up a virtual mail server within Local Area Network (LAN) only.I had follow this how-to http://www.linuxmail.info/squirrelma...o-in-centos-5/ and complete up to squirrealmail web mail. I added two new user to try on sending and receiving mail. It works.I run CentOS on VMplayer. I using my laptop to do all the stuff, the laptop default OS is windows 7, i install VM player on it and run CentOS inside the VM Player.I want to do testing on Windows 7 side by installing Thunderbird email client program, i want to connect to mail server with SMTP, IMAP/POP3 using the email service. I have problem while setting up user account on Thunderbird, Thunderbird seems like cannot detect my CentOS mail server. How ?
Do i have to do any other configuration on CentOS ? any DNS ? port number for IMAP,POP3 or SMTP ?
View 1 Replies
View Related
May 31, 2010
I'm running a Debian LAMP server and I am adding postfix. The initial config is working and I can send and receive mail both locally and over the WAN. The problem is that I cannot get mail delivered to the user's home directory using Maildir/. I have set the:home_mailbox = Maildir/ parameter in main.cf but mail still goes to /var/mail after Postfix reload. The system is now using Maildir/ instead of mbox but in /var/mail. I really want to get mail into the user's home directory.
View 6 Replies
View Related
Jul 15, 2009
I tried to setup a Postfix system as VM Guest, in a single file image. So I want to store the mails on another hosts throught NFS mount. I got various errors when Postfix try to write to the NFS share. Anyone knows what's the correct setup for this? like file permission on the NFS?
View 1 Replies
View Related
Jan 7, 2010
One of my mailservers running postfix has suddenly stopped sending mail and has been generating the following errors:
Jan 7 12:03:08 postfix/sendmail[3560]: warning: premature end-of-input on /usr/sbin/postdrop -r while reading input attribute name
Jan 7 12:03:08 postfix/sendmail[3560]: fatal: root(0): unable to execute /usr/sbin/postdrop -r: Success
[Code].....
Things I have tried to fix this problem, but didn't work.
1) Stopped postfix, uninstalled and reinstalled.
2) Did a complete filesystem relabel with a touch /.autorelabel and reboot.
3) Did a restorecon -F -R on /etc/postfix, /var/spool/postfix and /usr/sbin/post*
Nothing above has worked and have no idea why with selinux disabled postfix works and with it on it fails.
View 6 Replies
View Related
Mar 16, 2011
I am a first timer in setting up a mail server. As I heard that Postfix is a very simple mail server to configure I decided to use it on the same server where we have our squid. It seems that it is really simple enough because immediately after configuring,I can send and receive internal e-mails and send external emails. As I replied to the external emails that I received myself I found out that all of them just landed on the mail queue and this is where my problem starts. I cannot make Postfix deliver the messages to my outlook mailbox. By the way, I am sending the emails the through outlook also.
View 109 Replies
View Related
Apr 16, 2011
I'm new here and I'm sure this question has been thrown around a lot but I just couldn't find a solution. I have a networking website I've setup and we need to send notification mails to our members depending on activity related to their profiles(messages, comments etc).We are hosting the site on Centos5.6 with VirtualMin and are using Postfix as our MTA. We also use google apps for email on the site. Heres the problem, the mails go through for some gmail users but more often than not, they end up in gmail,hotmail and yahoo spam.We've setup the appropriate SPF codes on the server, DKIM and rDNS works fine.v=spf1 ip4:xx.xx.xx.xx a mx include:_spf.google.com ~all Below is a sample email that goes directly into gmail spam. I've replaced the actual values with dummy text (Ip, Domain etc)
Delivered-To: my.email@gmail.com
Received: by 10.143.165.5 with SMTP id s5cs223598wfo;
Fri, 15 Apr 2011 08:38:22 -0700 (PDT)
[code]...
View 1 Replies
View Related
Jul 31, 2009
i currently installed centos 5.3 with postfix. My old server is centos 4.5 final / new 5.3 final. Old server has sendmail / new has postfix. how can i transfer all the mail and settings from the old to the new? also, the old mail server is mail.xxx.xxx and for testing purposes i named the new mail server mail2.xxx.xxx.
when i an ready to put it into production, the new server will need to be mail.xxx.xxx and the old removed from the system. How do i go about changing the name and making sure everything comes out correct?
View 1 Replies
View Related
Jan 29, 2010
I have postfix setup right now and it's relying mail to our Exchange server fine. What i would like to do though is have postfix save the email that gets passed through so that if a manager deletes an email, it's easy to look through by date and find the email he's looking for. Well, I'm thinking it would be a lot easier then having to need to pull out the backup tape and try to recover one email. Does anyone know whether I would be able to accomplish this?
View 3 Replies
View Related
Jan 18, 2011
I have configured mail server with postfix with dovecot with no encryption:
When connecting with Thunderbird imap is working fine. When sending email from another domain to this domain again it is fine. But when I want to send mail from my domain to another it gives me error and this is /var/log/maillog:
Quote:Jan 18 18:23:09 srv1 postfix/smtpd[3991]: NOQUEUE: reject: RCPT from unknown[95.81.67.120]: 554 5.7.1 <Recipient email>: Relay access denied; from=<Sender> to=<Recipient email> proto=ESMTP helo=<[127.0.0.1]>
View 1 Replies
View Related
Aug 31, 2011
Is there an open source application that can download e-mails from a generic POP mail server, keep a copy of the mails locally and then deliver copies to multiple accounts on a LAN? I have a friend who uses a group e-mail account, and more than one person is always hooked onto that account. The problem is they cannot leave e-mail on the server, as it eats out their webhosting space, but if someone downloads a message in Outlook, the other users do not see that message.
View 1 Replies
View Related
Jan 28, 2010
I cannot get exim4 to actually deliver any "local delivery only; not on a network".But whatever I do in the config, all mail gets frozen with entries in the log file like:"root@empty R=nonlocal: Mailing to remote domains not supported"Maybe the problem is that there is no fqdn for the computer (and will never be). How can I enable local mail delivery?
View 14 Replies
View Related
Oct 12, 2010
I have to administer a few mail servers, a mail log server, 4 nameservers and a web server -all running on Centos 5 server distributions. Now I have a task: to avoid accidental crashes on the production servers while installing updates, my boss asked me to do clones (these clones will all be VMware virtual machines) of the servers (EXCLUDING the actual e-mails and mail log contents) and then to run those clones on VMWare Server. This way, first I will install and test updates on the clones and - if they will be running without crashes - I will apply the updates on the real production servers themselves. I have already installed VMWare Server 2.0 I have a few questions:
- How do I build the virtual machines to exclude the actual mail files and mail logs? Can I use VMware Converter for this purpose, or do I have to use another program?
- How do I actually do this cloning? Is there a tutorial on how to do this?
View 3 Replies
View Related
Apr 21, 2010
i'm trying to send a mail with "mail" on my cent os console , but without success. In Suse it's quite simple with "mail": mail -r sendersaddress@domain -s "subject" targetaddress@domain </tmp/filewithcontent
View 6 Replies
View Related
Dec 26, 2010
I am trying to set up a Mail Server -- Virtual Users with Postfix, PostfixAdmin, Courier, Mailscanner, ClamAV On CentOS 5.5 using this guide. These are the version and softwares I have used till now:-
[Code]....
View 4 Replies
View Related
Jan 15, 2010
Ok I have 5 virtual hosts on one IP but only 1 domain (forwardconference.org) will be sending emails out to people....confirmations and such. The other sites may send out some emails...like back to my personal email address not hosted on this server. That works. But to people on like aol or yahoo or hotmail....it doesnt
Problem is, most people are not getting the emails. Mailq reports them being deffered for some reason. I'm having our ISP setup a PTR to forwardconference.org....does this mean all my emails from either of the sites....even if I put a different FROM: address in the php mail script...will come from [URL]? Or should I just setup my server as its own SMTP server?
View 3 Replies
View Related
Jul 27, 2011
I am using postfix as spam Mailscanner to protect my mail server running sendmail. The problem is that when I forward an email from MailScanner mail me back with the following error:
<postmaster@localhost.@mydomain.com.>... Real domain name required for sender address (in reply to MAIL FROM command))
Jul 27 13:15:59 smtp postfix/local[28465]: C68AC1000001: to=<root@smtp.mydomain.com>,
[code]....
View 1 Replies
View Related
Nov 26, 2010
my postfix to send and recive external emails, but many recive in trash folder.Other programer say me that is need some configurations in postfix with and dovecot to work, but i dont know what!This is my first time configuring a linux server at this week.
my main.conf
sample_directory = /usr/share/doc/postfix-2.3.3/samples
readme_directory = /usr/share/doc/postfix-2.3.3/README_FILES
[code]...
View 3 Replies
View Related
Sep 16, 2009
I did a a basic install of postfix and dovecot instead of using courier-pop and courier-imap. This is only send and receiving e-mail locally within the test network 10.7.0.X and 10.0.0.X. I used:
[URL]
my postfix.conf is;
PHP Code:
[code]....
This is the error when I send an email from a local machine on the 10.0.0.X network.
PHP Code:
Jan 20 17:05:48 testbox postfix/smtpd[2491]: warning: Illegal address syntax from unknown[10.0.0.111] in MAIL command: <test@10.0.0.112>
View 8 Replies
View Related
Sep 29, 2010
I am running Fedora 10, Postfix and Dovecot I recently changed the password of a user using the 'passwd' command. The problem is that the user can no longer receive their email messages in Thunderbird (Authentication Error). However, they can still login using SquirrelMail and get their mail.
View 2 Replies
View Related
Dec 25, 2010
I recently had the need to relay SMTP mail through our organizations hosted MS Exchange server. I had to do a little troubleshooting, so I wrote a concise summary of the procedure I followed.
View 1 Replies
View Related
