I have a problem relate to posttfix.I want to mirgare postfix mail server to exchange 2010 mail server but I can't do it,u can help me.You can show me have to do configure postfix and exchange how to?
View 1 RepliesThe scenario: We have an external server that runs HTTP/DB servers for out shop system. Then, there's our local, in-house infrastructure that runs a.. yeah... Exchange 2010. The shop system on the external server needs to send mails to customers (order confirmations, invoices, etc.). seing as sending them directly through the local MTA (Postfix) would cause mail delivery problems because of reverse DNS issues, i've set the Postfix MTA to act as a satellite to our in-house Exchange Server, so the Exchange sends the mail instead, giving recipient mail servers a valid reverse DNS lookup.
Now, mails sent by the (proprietary, uneditable) shop system are relayed correctly and sent to the target e-mail address. My problem is: Mails not sent by the shop system, but by our own PHP scripts which run on that same external servers, are NOT relayed properly. So the Exchange is fine with the mails sent by the shop system, but not the mails sent by our scripts. This is what i get in the mail.log: The successfully relayed mail sent by the shop system:
[Code]....
I recently had the need to relay SMTP mail through our organizations hosted MS Exchange server. I had to do a little troubleshooting, so I wrote a concise summary of the procedure I followed.
View 1 Replies View RelatedI have an issue in my organisation that a particular user X's mail not able to forward from my linux server MTA postfix to my second windows exchange (HUB)mail server. We use linux mail server as SMTP Gateway we have implemented fetchmail for doing this job. and its MTA is postfix OS is SUSE. Rest users mail are able to come in exchange HUB server via linux mail server. When I see that purticular user X mail in linux I am able see its spool file in /var/spool/mail and also via mail or mutt command. My question is why postix not able to forward that user X mail to our exchange HUB server.
View 120 Replies View RelatedTwo exchange servers internally. One is setup for example.com (192.168.1.10) and the other is setup for example2.com (192.168.1.20) Both are behind a single public IP.
I want to use postfix to sit in front of the two exchange servers. Postfix will accept mail for both domains and relay to the appropriate server. I have postfix installed with only defaults at this point.
I'm using Ubuntu Server 10.04 and I can successfully relay mail generated by php scripts through an Exchange server.What I want to do is accept incoming mail from the Internet through postfix and relay it to the Exchange server but I want all mail that is not addressed to ...@mydomain.edu to be discarded.
View 3 Replies View RelatedI have postfix setup right now and it's relying mail to our Exchange server fine. What i would like to do though is have postfix save the email that gets passed through so that if a manager deletes an email, it's easy to look through by date and find the email he's looking for. Well, I'm thinking it would be a lot easier then having to need to pull out the backup tape and try to recover one email. Does anyone know whether I would be able to accomplish this?
View 3 Replies View RelatedI've setup my server by following a ton of goods, and it seems to work ok, but I need to start using my server for email in order to receive orders placed via my website. I've followed this guide - [URL] I followed the steps above, and tested the mail server via telnet, and all seemed to be ok. I tried sending an email via Squirrelmail, from cs@thinclientwarehouse.co.uk TO my working email simon@c1systems.co.uk, but the server returned with the following message:
<simon@c1systems.co.uk>: host mail.c1systems.co.uk[95.128.128.129] said: 550-Verification failed for <cs@localhost.thinclientwarehouse.co.uk> 550-The mail server could not deliver mail to cs@localhost.thinclientwarehouse.co.uk. The account or domain may not exist, they may be blacklisted, or missing the proper dns entries. 550 Sender verify failed (in reply to RCPT TO command)
i have configure exchange server 2010 in evolution Ubuntu 11.04 64 Bit during configuration no Error message, and also i got message "authentication finished successfully" after completed no folder in my account please find my screen short same step i flowed in fedora its working fine all the folder i can able to view
View 1 Replies View RelatedI have setup a postfix mailserver and it seems to be working ok, we are only using this to relay mail to our forum users. Its not being used to recieve any email only send them out to the internet.
What is the difference between the mail.log and mail.info files? Can I turn one or both off? I see alot of messages like...
Just wondering what this string of log entries means? Also I am getting duplicates in the syslog file as well.
I'm running SUSE linux Server version 11. I want to configure mail server with postfix & cyrus-imap. For that, i have read many documents in Internet by i met issues. I'm running DNS in this server & it's ok Now I cannont send mail through command line.
[Code]....
I'm running a Debian LAMP server and I am adding postfix. The initial config is working and I can send and receive mail both locally and over the WAN. The problem is that I cannot get mail delivered to the user's home directory using Maildir/. I have set the:home_mailbox = Maildir/ parameter in main.cf but mail still goes to /var/mail after Postfix reload. The system is now using Maildir/ instead of mbox but in /var/mail. I really want to get mail into the user's home directory.
View 6 Replies View RelatedHow do I make a local mail server that itself is a client to a WAN mail server.I want the local mail server to query new mail every 30 minutes from the WAN server.
View 6 Replies View RelatedSetup my postfix mail server and courier-imap/pop. My postfix server now is working with tls and saslauthd, I can send/receive email inside my domain as well as outside. However, I need two separate smtp and imap/pop3 server, I mean two machine - one with smtp function and one with imap/pop3 function working together.
View 4 Replies View RelatedI set up my mail server using the guide here: [URL] I am able to receive mail, I can send mail locally, but I can't send to external addresses. This is in my mail.log: Quote: Jun 30 14:40:43 Server postfix/smtp[10725]: 2FD9322015BF: to=<myemail@gmail.com>, relay=none, delay=1634, delays=1484/0.02/150/0, dsn=4.4.1, status=deferred (connect to alt4.gmail-smtp-in.l.google.com[74.125.65.27]:25: Connection timed out)
This is my main.cf:
[Code]...
Our primary mail server is Exchange 2003 Standard on Windows Server 2003 Standard - don't shout at me; I inherited it already set up this way.I have a couple of hardware identical redundant servers (HP ML350 boxes), all with very fast 2 or 4 disk arrays, multiple core CPUs and plenty of memory, and I am looking at two potential new additions to the infrastructure.
A secondary mail server is high on my list of priories. I've been well and truly bitten by Exchange in the past and given that this particular box has been running four years straight and that it's mail store is dangerously large, having a secondary mail server in place suddenly makes a lot of sense.
A new Exchange 2010 box is currently being set up, but the secondary mail server will remain in place even when the new Exchange server is brought online, so this won't be a wasted exercise.... I also want a gateway box in place to filter and relay mail to the primary server, or to the secondary server if the primary is unavailable. Currently our outer perimeter is:
ISP supplied CISCO router
Draytek VigorPro 5510 UTM
Untangle running in bridged mode (primarily used for SPAM filtering, URL blacklisting, and very little else) Exchange 2003 sits behind the Untangle box. This is how I want to end up:
CISCO >> Draytek >> Ubuntu gateway >> Exchange/secondary mail server
I know I could replace/remove the Draytek but I want it to remain for several reasons, including lots of VPN dial-in users already configured and that it offers us an additional layer of email antivirus scanning before things hit the Exchange box. No point switching all of our remote workers over to new tunnels unnecessarily...
I have done some research and have started testing a pilot secondary mail server using Ubuntu/postfix DNS is properly set up and MX records and reverse PTR records are all present and correct, and things are looking encouraging so far. Before I go out over deep waters and start to flounder, has anyone who has done something like this got any obvious howlers I should be looking to avoid ?
I have set up ubuntu server V9 with squid, dansguardian and clam. I have fetchmail wroking to bring in mail from our externally hosted website and delivering it to users mailboxes in exchange server. That was easy following guides on the internet. However my brain is failing me now. How do I reverse the process and send mail to the outside world. I need to be able to do this without authentication. At the moment i am using a windows environment with exchangepop3 which uses smarthost to connect to the ISP smtp server. Please help or point to a simple guide. If i cannot solve this soon i will have to revert to microsoft solution for the proxy server.
View 7 Replies View RelatedI have a RHEL 4.5 with Postfix 2.2.10 configured as a smart host for an Exchange 2003 server. Its been running well for three years like this. We have some users that are configured with alternate SMTP addresses for a secondary email domain in Exchange. One user is not getting his email for the secondary SMTP. All the others are. After some digging, the maillog indicates Postfix is not relaying his email to Exchange but to the Postfix local mail folder under /var/spool/mail. What in the configuration would cause this? His email is in the relay_recipients file as the others are.
View 1 Replies View RelatedSeems quite a lot out there are finding it simple enough getting Thunderbird/Davmail to work, yet I've been at it for days now and still no luck. I've finally given up altogether with Evolution last week, as it seems from weeks of reading and trying, there just isn't a solution for it to work with Exchange Server mail. Yes I tried brutus and its web sites are down so to get additions such as Brutus Keyring is impossible. (its all a long story for another day)Evolution is now uninstalled and in the bin.So now Im into the 5th day trying with Davmail and Thunderbird to get emails from my company mail exchange server.I am sure Im going to have better luck with Thunderbird from what Ive read so far, but it still eludes me how to set it up with Devmail and the information Ive found so far is not very clear. I am sure I am just missing the most simplest step somewhere along the line.
Can someone please post a detailed instruction on how to configure both Thunderbird and Devmail to work together and also how to test if Davmails is working?I can easily access my company emails via OWA with URl... from my home internet, so no issue there.From the efforts of trying to get Evol to work where it came up with the error. "Evolution connector is not compatible with Exchange 5.5", I assume our company server is running an MS exchange server version 2003 or older.
I cannot receive mail from my POP server; I used the same settings as I previously did with Thunderbird but I keep recieving an error message "La lecture de salutations valides du serveur POP pop.videotron.ca a �chou�" (roughly: exchange with the POP server failed).I am able to connect to the Internet and to other mail accounts with Evolution.
View 1 Replies View RelatedI have ticket tracking software that mails ticket to groups. Right now the software is on an exchange server. After moving it to a dedicated linux server (debian lenny) I cant get it to email any of the internal domain addresses. I have tried to setup sendmail to relay it to the exchange server. Logs indicate that it was sent by the ticket tracking software but the message never hits the mailbox. It also wont get to any other mail address. Is there a better way to do this? The crm software will utilize either a smtp server or any mail server on the localhost. The problem is that with the dedicated server on the same network as the exchange server, it fails to send the mail even if I assign an external smtp server. But if the dedicated server is on a different network then it works using any smtp server in its configuration. I need something that can "pass the email" to the exchange server. Or just be able to send the mail to internal email account and still be on the same network.
View 2 Replies View RelatedEvolution won't connect to our Exchange Server 2003. I have the Evolution-Exchange plugin installed and the Evolution vsn is 2.28.3. The Ubuntu vsn is 10.04 lucid. In the setup of the mail account I enter the user name in the form domainusername; in the OWA URL I enter the URL in the form - URL... and then I click the authenticate button (can't progress without authenticating). When requested I enter the password. Then comes the error message - could not connect to the server. Make sure the url is correct and try again.
I can connect to OWA using a browser. However I have to negotiate past the browser warning me that the server has a self generated certificate and not from a trusted authority. Maybe this is the problem, I don't know. The fact that I can get to OWA by means of a browser means that the firewall in our router is configured correctly, as is port forwarding to the server.The domain/exchange server is in our office and I have administrator rights.
so i set out to change the default smtp port the server uses because my ISP blocks port 25 and i need the email to work in outlook. this morning i could receive email, but not send it. so i did some research and thought that i needed to edit the master.cf file in /etc/postfix/ by commenting out this line: smtp inet n - n - - smtpd -oand replace it with587 inet n - n - - smtpd (587 being the port i want to use)somewhere along the lines postfix server stopped running and now i cannot get it to start.if i try using SSH it crashes immediately and if i restart it in simple control panel nothing happens
View 7 Replies View Relatedhow to setup sendmail ( Centos 5.2 ) as mail relay for Microsoft exchange. I will put the mail relay in DMZ and Mail server in Local Network.
View 3 Replies View RelatedI am using postfix as spam Mailscanner to protect my mail server running sendmail. The problem is that when I forward an email from MailScanner mail me back with the following error:
<postmaster@localhost.@mydomain.com.>... Real domain name required for sender address (in reply to MAIL FROM command))
Jul 27 13:15:59 smtp postfix/local[28465]: C68AC1000001: to=<root@smtp.mydomain.com>,
[code]....
my postfix to send and recive external emails, but many recive in trash folder.Other programer say me that is need some configurations in postfix with and dovecot to work, but i dont know what!This is my first time configuring a linux server at this week.
my main.conf
sample_directory = /usr/share/doc/postfix-2.3.3/samples
readme_directory = /usr/share/doc/postfix-2.3.3/README_FILES
[code]...
I did a a basic install of postfix and dovecot instead of using courier-pop and courier-imap. This is only send and receiving e-mail locally within the test network 10.7.0.X and 10.0.0.X. I used:
[URL]
my postfix.conf is;
PHP Code:
[code]....
This is the error when I send an email from a local machine on the 10.0.0.X network.
PHP Code:
Jan 20 17:05:48 testbox postfix/smtpd[2491]: warning: Illegal address syntax from unknown[10.0.0.111] in MAIL command: <test@10.0.0.112>
I am running Fedora 10, Postfix and Dovecot I recently changed the password of a user using the 'passwd' command. The problem is that the user can no longer receive their email messages in Thunderbird (Authentication Error). However, they can still login using SquirrelMail and get their mail.
View 2 Replies View RelatedHaving my Diploma Final Project on setting up a virtual mail server within Local Area Network (LAN) only.I had follow this how-to http://www.linuxmail.info/squirrelma...o-in-centos-5/ and complete up to squirrealmail web mail. I added two new user to try on sending and receiving mail. It works.I run CentOS on VMplayer. I using my laptop to do all the stuff, the laptop default OS is windows 7, i install VM player on it and run CentOS inside the VM Player.I want to do testing on Windows 7 side by installing Thunderbird email client program, i want to connect to mail server with SMTP, IMAP/POP3 using the email service. I have problem while setting up user account on Thunderbird, Thunderbird seems like cannot detect my CentOS mail server. How ?
Do i have to do any other configuration on CentOS ? any DNS ? port number for IMAP,POP3 or SMTP ?
I'm trying to get my server back up to snuff. I'm using Debian Squeeze right now and I'm up and atom with apache, mysql, php, pureftpd, ssh, and I have squirrelmail installed.
My dilemma comes with the mail part of the whole ordeal, Postfix and Courier are installed, have their keys made, and for what I assume, are configured correctly. HOW do I make new virtual users? My domain points to this machine as well as my MX record for mail.mydomain.com.
I need IMAP and POP working. And upon the creation of new email users, will SquirrelMail interface with Postfix and Courier? When I installed SM I set it up for use with Courier.