I installed LaMp 2 days ago. First everything works; But until yesterday, I can't start anymore mysql server : it failed each time.
When I look at the status :
Code: Select allsystemctl status mysql
Failed to get D-Bus connection: Erreur inconnue -1
It's like it can't generate mysqld.sock
Code: Select all/usr/bin/mysqladmin: connect to server at 'localhost' failed
error: 'Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)'
Check that mysqld is running and that the socket: '/var/run/mysqld/mysqld.sock' exists!
I keep reading man and trying to find something I didn't configure correctly, but I can't find nothing.
I need to create a sandbox environment on my LAMP server for PHP/MySql development. Anyone who could point me in the right direction or share their insight?
Good tutorial, using images for a lamp server that has, MySQL,PHP, Apache, FTP with all the fruit for running a server that will host a Gallery, forum and main site
I know there's heaps around for Ubuntu 9.10, but its not quiet what I'm looking for as in Gd, ImageMagick and some extras for Apache mods
Since upgrading from Wheezy to Jessie I have not been able to start the MySQL-server. When I do a "systemctl start mysql" I get the following answer on the console:
Job for mysql.service failed. See 'systemctl status mysql.service' and 'journalctl -xn' for details. Entering 'systemctl status mysql.service' the answer is: ● mysql.service - LSB: Start and stop the mysql database server daemon Loaded: loaded (/etc/init.d/mysql) Active: failed (Result: exit-code) since Don 2015-06-18 18:35:41 CEST; 4min 1s ago Process: 11272 ExecStart=/etc/init.d/mysql start (code=exited, status=1/FAILURE)
syslog and hostname.err don't show any pertinent messages.
I started over combining the first parts of this guide: [URL]..ubuntu8.04 (Only the first few parts in terms of configuration and naming). Then I used this guide: [URL]..Surprisingly enough all steps worked.
1. Now I need to set up LAMP servers with MySQL master/slave replication and Apache rsync.
2. Next i need to add BIND to both my Load Balancers with master/slave backup and replication...
Are there any guides to look at to follow on these? Can tou point me to the right direction for BIND with replication.
I am getting the following error when starting mysql using 'sudo /etc/init.d/mysql start':
Mar 15 16:33:56 MoodFishDev /etc/init.d/mysql[18317]: 0 processes alive and '/usr/bin/mysqladmin --defaults-file=/etc/mysql/debian.cnf ping' resulted in Mar 15 16:33:56 MoodFishDev /etc/init.d/mysql[18317]: ^G/usr/bin/mysqladmin: connect to
I am completely new to Debian . My aim is to get one of my machines to run this system as the intranet server including www server, mailing server, intranet server and LAMP at the same time on the small network. I have found some resources including how-to's how to install Debian as the normal operative OS not as the intranet server. I have also found this: [url].However that is applicable for the 'Mandrake' distribution (Mandriva). Now, I would like to ask few questions that will be applicable not only for me but for more users and if someone could answer them .
1.What installation source shall I choose, CD/DVD/Network Install CD? 2.I have found this: [url] ... troduction is that applicable? 3.How to install web server, mail server, LAMP and configure them, link above describes mail server installation not configuration itself. 4.How to configure intranet on Debian to work as the server serving the Windows clients (using Samba?)
If someone could propose a set of the sources or the instructions how to achieve all of the steps I would really appreciate that. Also, if sources will be given by the users I shall try to achieve what I want and write up 'how-to' for this problem. Therefore, me and other users would benefit from that.
I'm trying to move a mysql 5.1.50-community InnoDB database from one location to another.When starting the service I get:Starting MySQL.Manager of pid-file quit without updating file [FAILED]I've searched for a way to do this but I can only find people who describe what I've just done.
im in the process of installing LAMP. im presently installing mysql and that's where i got into trouble...
im following the this tutorial [URL]
i tried the following :
Step 3. This is where things may start to get tricky. Begin by typing the following into Terminal:
mysql -u root
and i got this output:
root@konlah-laptop:/home/konlah# mysql -u root ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
obviously my question is why can't i connect to local mysql?
I cant start mysql of my server after the update. my operating system is centos. I get this error. MySQL Daemon failed to start. Starting MySQL: [FAILED]
it seems i have successfully installed LAMP.. i have a very basic page below that works when invoking "data()" but when i try to connect to mysql server (by removing the comments "//") it would just return a blank page.
i am using putty to connect to my server and wanted to restart mysql server. searched the internet and found thatcommand is /etc/init.d/mysqld start or stopbut it did not worked.then tried /etc/init.d/mysql stop or startthis also did not worked.
On a newly installed centos I updated mysql-* & php-* files using RPM repository, and I installed phpmyadmin. After that i tried restarting mysql and it just said: failed
Code: service mysqld start MySQL Daemon failed to start. Starting mysqld: [FAILED]
XAMPP: Couldn't start MySQL! I have Ubuntu 11.4. After downloading XAMPP, I went to my Downloads. I then went to the Folder (xampp-linux-1.7.4.tar.gz) and right clicked on it. The options window opened, and I selected "Extract Here"! after doing so a Folder called lampp appeared. The next step I did was open my Terminal and typed ( sudo nautilus / ). I pressed Enter and a window with a bunch Folders opened up. I selected, and opened the opt Folder. I then dragged the lampp Folder to the opt Folder.
The lampp Folder is now in the opt Folder. I right clicked on the lampp Folder and selected Properties, and then the Permissions tap. I set all 3 Folder access: -to- Create delete files and all 3 File access: -to- Read and write. I checked Allow executing file as program, and Apply Permissions to Enclosed Files button, then closed. I went back to Terminal and typed (sudo /opt/lampp/lampp start) and pressed Enter. Everything is working fine execpt MySQL!
Starting XAMPP for Linux 1.7.4... XAMPP: Starting Apache with SSL (and PHP5)... XAMPP: Starting MySQL... XAMPP: Couldn't start MySQL! XAMPP: Starting ProFTPD... XAMPP for Linux started.
I don't know if it makes any difference but I do have Netbeans IDE 7.0 php installed and I've only worked on html and CSS on it.
I'm trying to install ispCP and i need to start mysqld but it won't seem to start. I'm somewhat of a nooblet to linux (have a year of VPS 'experience', but nothing too fance) so bear with me.
When i run "service mysqld start" it fails with the error: "MySQL Daemon failed to start."
I ran: "tail -n 30 /var/log/mysqld.log" and this is the output;
[root@dragon575 mysql]# tail -n 30 /var/log/mysqld.log 110726 16:03:10 InnoDB: Completed initialization of buffer pool 110726 16:03:10 InnoDB: highest supported file format is Barracuda. 110726 16:03:10 InnoDB: 1.1.8 started; log sequence number 1588761 110726 16:03:10 [ERROR] Aborting
i am trying to set up LAMP on an old pc i have installed linux, apache, mySQL and PHP following this guide Installing Apache2 With PHP5 And MySQL Support On OpenSUSE 11.3 (LAMP) | HowtoForge - Linux Howtos and Tutorials. i have installed phpMyAdmin but when i try and acess it i get this error
Error MySQL said: Cannot connect: invalid settings.
phpMyAdmin tried to connect to the MySQL server, and the server rejected the connection. You should check the host, username and password in your configuration and make sure that they correspond to the information given by the administrator of the MySQL server.
Trying to take a UK formatted date (30/12/2010) and insert it into Mysql (2010-12-30) is just not going to plan. I have a feeling I'm getting close, however it's just not working out.
I am trying to install Koha on centos5.5. Afte installing myqsl it starts normally. But when i add following lines into my.cnf and trying to restart mysql again it says that restart is failed.
here is the lines that i add into [mysqld] section
i'm new to Debian os and currently want to install php5 apache2 and mysql 5.1. But ive got problem to start the mysql services.The error on command prompt as belows:
When i try to open a connection to start querying i get this message:
Cannot Connect to Database Server Cannot start SSH tunnel manager
1 Check that mysql is running on server 127.0.0.1
2 Check that mysql is running on port 3306 (note: 3306 is the default, but this can be changed)
3 Check the root has rights to connect to 127.0.0.1 from your address (mysql rights define what clients can connect to the server and from which machines)
4 Make sure you are both providing a password if needed and using the correct password for 127.0.0.1 connecting from the host address you're connecting from
I have a VPS running on centos-5-x86 and mysql server went down two days ago this is my mysql server log
110602 18:28:09 mysqld started InnoDB: The log sequence number in ibdata files does not match InnoDB: the log sequence number in the ib_logfiles! 110602 18:28:14 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery.
I think this goes here, but I'm not sure. I decided that XAMPP had been troublesome enough. MySQL never worked. So I decided to instal the LAMP stack offered by YaST. I went about installing it thinking that it would all work. But it seems that I was wrong. So I try to start mysql, and here's what I get:
Code: the-matrix:~ # mysql start ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/mysql/mysql.sock' (2) or Code: the-matrix:~ # rcmysql start Starting service MySQL warning: /var/mysql/mysql.sock didn't appear within 30 seconds chmod: cannot access `/var/run/mysql/mysqld.pid': No such file or directory