Ubuntu Networking :: Recognize Intranet Host Server Name?
Feb 19, 2010
I am using Ubuntu on a Windows network.
One of the computers have apache server (working), it has 192.168.1.6 IP, and the name of the computer on the network is "servidor"
I can't access from ubuntu, if I type http://servidor or 192.168.1.6, it goes to [URL], but I can access shared folders, just the host intranet server I can't
I have vmware with windows xp, and I can access http://servidor from there, but not from Firefox in Ubuntu.
View 4 Replies
ADVERTISEMENT
Jun 16, 2011
I plan to host a Server. I want to know which is the best for Visualization.
Cent OS = > Xen
VMware = > open source.
i need to host a intranet in my company. they r going use java web based.which way is the best solution improve the I/0 request speed.
View 4 Replies
View Related
Feb 24, 2010
I have a printer configured on my Ubuntu server using CUPS amd made it available to the local network. The printer is recognized on my other Ubuntu machine without any problems.
But on my Suse laptop, the printer is not recognized. Using the YaST printer Configuations, I choose the option "Recieve Printer Information from Remote CUPS servers. But no printer is found.But... when I choose Do All Yout Printing Directly via One Remote CUPS server and enter the correct IP address (192.168.1.100), the printer is found andI am sure the printer info is broadcasted because it shows up on my second Ubuntu PC. But why is it not recognized by default on my Suse machine
View 2 Replies
View Related
May 14, 2010
Both server (web01), in DMZ, and client (app01), intranet, are Linux OEL5.5.
A few hints follows:
1- I ssh to web01, in DMZ, from a intranet machine on my desktop, export my DISPLAY, and try to bring up xclock; nothing happens.
2- traceroute from web01 to app01 fails.
3- NFS mount from web01, nfs server, to nfs client, app01, fails.
How should my network configuration on web01 or app01 be to make this NFS mount from web01 to app01 work?Each server has 4 NICs, I've only used eth0.
View 2 Replies
View Related
Aug 23, 2011
I am completely new to Debian . My aim is to get one of my machines to run this system as the intranet server including www server, mailing server, intranet server and LAMP at the same time on the small network. I have found some resources including how-to's how to install Debian as the normal operative OS not as the intranet server. I have also found this: [url].However that is applicable for the 'Mandrake' distribution (Mandriva). Now, I would like to ask few questions that will be applicable not only for me but for more users and if someone could answer them .
1.What installation source shall I choose, CD/DVD/Network Install CD?
2.I have found this: [url] ... troduction is that applicable?
3.How to install web server, mail server, LAMP and configure them, link above describes mail server installation not configuration itself.
4.How to configure intranet on Debian to work as the server serving the Windows clients (using Samba?)
If someone could propose a set of the sources or the instructions how to achieve all of the steps I would really appreciate that. Also, if sources will be given by the users I shall try to achieve what I want and write up 'how-to' for this problem. Therefore, me and other users would benefit from that.
View 1 Replies
View Related
Sep 8, 2009
Many of mails sent from my mail server that are in Queue;The main reason is deffered by domains like yahoo,aol,etc.but there is one more error that i keep getting and that is Host Unknown,Below is an example from mail log,The catch is,test mail sent on the same email id sent from my personal mail from the same server i.e. url was deliveredHowever,another mail containing client information sent from customercare@mycompanysdomain ended up in queue.
There are more examples of the same,around 20 domain have the same problem.
Sep 7 14:33:46 server2 sendmail[24591]: n8793jiC024589: to=<abc@xyz.fi>, delay=00:00:00, xdelay=00:00:00, mailer=esmtp, pri=163672, relay=xyz.fi., dsn=5.1.2, stat=Host unknown (Name server: xyz.fi.: host not found)
Sep 7 22:09:42 server2 sendmail[6407]: n87Gdffa006403: to=<abc@def-fgh.com>, delay=00:00:00, xdelay=00:00:00, mailer=esmtp, pri=152474, relay=def-fgh.com., dsn=5.1.2, stat=Host unknown (Name server: def-fgh.com.: host not found)
View 2 Replies
View Related
Aug 17, 2011
I work for an organization with a few hundred employees. We need a very simple CMS for posting basic organizational documentation such has step-by-step instructions, as well as pdf and MS Office documents.We would prefer something that would organize content hierarchically, so we can structure the info into departments and functional areas. A MySQL or similar database is preferred, but flat file is okay as long as it does not limit content/structure too much.We would probably have about 15 to 20 content authors/editors. No workflow, authentication (except authors/editors) or secure content areas are required.
The only limitation would be that the content could only be accessed from a particular range of IPs. (I assume that would be set in Apache.)
View 1 Replies
View Related
Jul 7, 2010
I want to do is make an old computer of mine that I use for web development be accessible to anyone within my LAN only.
so in a nutshell i don't want the world wide web to be able to access this server since I use it for development work only and i do most of my actual development work on another system since most of the applications i use requires windows.
I know you can block incoming traffic to all IPs or add individual IPs to allow in, but how can i make the firewall only accept incoming traffic from those within my LAN network?
if you wish to know what I'm using to configure my firewall, I'm using firestarter on this server
View 5 Replies
View Related
Jul 15, 2011
i've installed a PPTP VPN and have it configured under webmin. fine.i've connected from a remote laptop to the VPN and can access the local netowrk with it. greati really want to be able to access the outside world whilst tunneled through the VPN but clearly i need to do something else?
View 1 Replies
View Related
Jul 19, 2009
Just something that struck me while working on our virtual servers today.
I have bonded 3 NICs at the host in Ubuntu Server 8.04 LTS. They are using mode 0 for Round-robin. Point is to increase the speed/performance of all the servers, but mainly the fileserver. The fileserver is a virtual server running Ubuntu Server 8.04 LTS on VMware Server 2.0.
1) I noticed the NIC in the slave OS reported link speed as 1000 and Im unable to change it as the NIC (virtual one) doesnt support it. Does this not really matter, as the NIC doesnt exist, and it will run at higher speeds anyway? Or do I have to remove the bond on the host, bridge all 3 interfaces from the host to the slave OS, and then make a bond in the slave OS?
2) While at it, does mode 0 only increase performance on data being sent from the host or does it also increase the available incoming bandwidth?
View 1 Replies
View Related
Mar 14, 2011
I want to setup an intranet mail server as a project. I tried to go through various forums but could not get a satisfactory model. My sceme of things is as follows:The server a virtual machine is after a router which has a built in dhcp server. Prefer to use sendmail but postfix ok client machines should be able to access the mail on evolution/thunderbird or web access using squirrelmail.Mail will not be relayed to anybody outside the intranet.
View 1 Replies
View Related
Jun 4, 2010
I have been trying to set up an old pIII 700Mhz PC as a local intranet server to run some PHP code.
I have got debian installed setup ssh since it is a headless computer mounted a usb hard drive to store the web page remapped apache2 to use the /mnt/sda1/html/ folder and tested that php scripts are running
now what i can't seem to get working is the following:
ftp access to /mnt/sda1/html so I can upload files from my pc on the network and
phpmyadmin so i can easily manipulat mySQL databases.
after reading [URL] I typed in #apt-get install phpmyadmin
it downloads a bunch of stuff and says it is installing it but when i do the next step in the instructions go to
http://192.168.0.100/phpmyadmin/
I get a 404 Not Found error.
View 3 Replies
View Related
May 12, 2011
what is the best configuration in httpd.conf to set up an intranet with Apache on Windows server?
View 1 Replies
View Related
Apr 13, 2010
We have one squid proxy server running on CentOS 5.3 64 bit with Squid 2.6. it works well for me.
but my problem/question is :
Is it possible to skip proxy for all Internet addresses? and only allow proxy if clients are accessing external addresses?
right now users have to explicitly say in the browsers .. BYPASS PROXY SERVER for local addresses after check the use proxy server
and address has to be mentioned. most users are non technical so they don't use this option or put wrong setting in bypass proxy option
View 2 Replies
View Related
Mar 11, 2011
(ubuntu10.10)i want to use use the Intranet and Extranet at the sanme time at school,how to set ?my Intranet ipv4 :10.62.14.79 255.255.255.0 gw 10.62.14.1my Extranet is DSL(use DHCP)my problem is when i use one of them,i must break the other.
View 3 Replies
View Related
May 1, 2009
I am using Fedora 10. I have a network design like that:
WinServer --- (r1)router(r0) --- (eth1)LinuxPC(eth0) --- intranetPC
All netmask is 255.255.255.0
WinServer network is 192.168.1.0/24
intranetPC network is 10.10.0.0/24, gateway is IP of the LinuxPC(eth0): 10.10.0.2
Router:
r1 -IP: 192.168.1.253
r2 -IP: 10.10.0.253
LinuxPC
eth0 -IP: 10.10.0.2
eth1
-IP: 10.10.0.40
-GW: 10.10.0.253
I search in Internet several days to find how to configure the LinuxPC to a gateway. The LinuxPC can ping and connect the WinServer and intranetPC correctly, but the intranetPC cannot ping and connect the WinServer network.
I used the webmin to configure the Gateway.
I used the iptables to set allow all connect, than
iptables -t nat -A POSTROUTING -eth1 -j MASQUERADE
iptables -A FORWARD -i eth0 -j ACCEPT
echo 1 > /proc/sys/net/ipv4/ip_forward
In "/etc/sysconfig/network" add "FORWARD_IPV4=true"
View 11 Replies
View Related
Jul 28, 2010
There are a lot of boxes in this network and we have intranet site. If I connect computer directly to the network with everything set to automatic. I can see this intranet site. But I've installed a switch. One box has two net adapters and it takes internet, intranet and all from one adapter, the other adapter is connected to switch. Now, I have connected to this switch two computers. Internet is working fine. But I cannot get to this intranet site from these boxes. I can get into shares of other computers in the network but they cannot see me. Everything is hidden behind the gateway. But that's not the problem for me. All I want is to get to this intranet website. How can I do it?.
View 2 Replies
View Related
Jun 16, 2010
I have a windows PC and a fedora 13 linux box. When connecting to the linux from windows, I'd like to type the hostname instead of the ip address. Apart from setting the hostname, what do I have to do to publish my hostname on the intranet. (set up a nameserver?)
Though hostname works on the linux box, even this fails: nslookup myhostname Also I'm a newbie. I've tried installing some packages like samba and dhcp, using yum...;service chkconfig... and then checking whether nslookup or nmblookup work with my hostname. But it's just guesswork. Under system -> Administration there is no network option. but it is not clear what package is needed to install it, or whether such a thing is supported in fedora 13. I did try system-config-network, but it has few options none of which pertain to hostname resolution. The fedora manuals dont seem to cover it, at least in recognizable plainspeak to me.
View 14 Replies
View Related
Nov 29, 2010
I have client workstations on separate intra-net LANs. Both intra-nets use network address translation (NAT) or masquerading on the LAN. The private network IP address should not matter (unless it does). When LAN-1 connects with an exterior web site, it will leave a record of the ISP public IP address. A LAN-2 connection could read this record, but how would it know how to reach into LAN-1? How can a network application running on a LAN-1 workstation find and connect with a network application running on a LAN-2 workstation? There is a utility called "woof" where one workstation presents a limited feature web browser for access by other hosts on the same LAN.
View 2 Replies
View Related
Jul 1, 2010
I didn't know where to turn as a linux nooby. If you want to hear my story, continue. I wanted to host a TF2 server for my clan, and started reading up. So, I throw Linux on my laptop (ubuntu) and after about 3 hours I FINALLY have a WORKING CONFIGURED server that my friend was able to join and I was admin on. However, I wanted a Downloadurl for my bz2 files. My question is, how do I host a website where I can upload files and put it as my downloadurl for my tf2 server on linux, and if you can,
View 3 Replies
View Related
Oct 13, 2010
I've set up ubuntu server 10.04 x64 with kvm and bridged networking and installed win server 2008 as a guest os. The guest os has full access to the network including lan/wan but the host os can only reach my lan and not the wan. This is true even when the guest machine is powered off?I have to admit that my knowledge of networking, particularly with respect to linux is very flakey but surely if the guest has internet access this should also apply to the host? My only suggestion is an issue with mac addresses but i don't know where to start. Has anybody ran into this problem before?
View 3 Replies
View Related
Jun 3, 2011
All I want is to be able to access files on one Ubuntu computer from another Ubuntu computer via a home wireless network. I have been at this for a week now. Scouring the web for answers and so far I have come up with this: Port 22 is open. I have both computers IP addr's via right clicking on the network icon-> Connection Information. ssh is installed and running. Both computers are listening on port22. But when I try Places->Connect to server, I get "no route to host". I'm not a networking guru and I'm at a complete loss on this.
View 9 Replies
View Related
Sep 5, 2009
I am trying to set up a nfs server on my Fedora 11 host machine so that my virtual machines on the same host can access files on the host.The ip address of my host machine is 192.168.1.132The ip address of my virtual machine is 192.168.122.180I can ping successfully from host to virtual machine and vice versa.On the host machine, I have the following :1) Edited /etc/exports to add this one line./home/stardust496/files 192.168.122.180(rw,nohide)2) service rpcbind restart3) service nfs startOn the irtual machine, I do the following:1) mkdir /mnt/files2) mount 192.168.1.132:/home/startdust496/files /mnt/filesBut the mount call does not succeed. (It hangs for a while and then returns saying that it did not succeed)
View 3 Replies
View Related
Feb 1, 2011
I'm setting up apache on centOS 5.5 and administering it from another host on my LAN(this web server has no Xorg). I can ping from the config host to the web server but not the other way. My network is quite a way from being set up so i'm just configuring the web server at the moment, the simplest way i can. It's just trying to get two LAN hosts both with 192.168.1.0/24 I.Ps to talk to each other using a router to connect them.
Here are the outputs of ifconfig and netstat -rn for the web server, the config host and the router:
The ifconfig -a and netstat -rn of the config host are:
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
[code]....
View 5 Replies
View Related
Oct 30, 2009
Bit of an odd one, this. I've migrated a website from my old server to a new machine. Both servers run Ubuntu + Apache2. Both only serve a single site, apart from the default site.I've flipped the domain name to the new IP address.The trouble is that after moving the virtual host config over into sites-available, with the necessary link in sites-enabled, Apache attempts to serve from the default web root (/var/www) rather than the actual site content (in /var/www/technology). So for example, an attempt to browse.
View 1 Replies
View Related
Mar 4, 2010
I am working on a cluster for a molecular dynamics class and I have to edit my FORTRAN code (only the newest and best for me!). In order to get through to the cluster I have to ssh in. The network on which the cluster resides is behind a firewall, so I have to ssh through the firewall into the network first.
this is fine, I can login and move files and folders as needed, including sftp-ing into host 1, then into the cluster so I can transfer files from cluster to host and then host to me. This gets rather tiresome, so it would be nice to edit the files in place.
The problem is that when I access my code with emacs it launches the emacs client on Host 1, with no mouse support. I know the purists will howl about how I should be using keyboard shortcuts, but I am a chemist and not a programmer, so the mouse is very nice for me. Is there any way I can perhaps mount the cluster using sshfs so that when I open my code it launches a local instance of emacs? Sorry if this is the wrong forum, but I thought it was network related.
View 3 Replies
View Related
Apr 17, 2010
I want to learn how to build a Linux network from scratch that includes file and printer sharing, intranet. I have an intermediate-level knowledge of Windows networking. Can anyone suggest a book or online tutorial that I can learn from? Now let me be clear: I am finding no shortage of tutorials on the web. However, too many are old or incomplete.
A little extra info: I am a teacher/network admin for a small private school with about 50 student computers (that I wish to become Linux machines in the future) and about 10 staff computers (mostly Windows laptops--I do not expect the staff to convert to Linux as readily), I currently do not have an intranet implemented.
View 1 Replies
View Related
Jun 8, 2010
i have a problem with my internet connection in ubuntu 8.04 server edition. if i ping to: [URL]... i get: Destination Host Unreachable but when i ping to my gateway or other pc's in my network no problems occur.
View 9 Replies
View Related
Jun 22, 2011
I am trying to access a DVD mounted on a machine running Fedora12 (192.168.0.105). I thought this should be possible with NFS, but the above error message is what I keep getting, no matter what I try.
Here is my mount command:
Code:
mount 192.168.0.105:/mnt/dvd -t nfs /tmp/scaleo
The Fedora 12 machine has the NFS server running, and the corresponding entry in /etc/exports is
Code:
/mnt/dvd *(ro)
I thought this might be a firewall problem, but it persists even if I turn firewalls off on both machines (client as well as server.) Also, doing
Code:
ssh 192.168.0.105
is OK, so what is wrong with the route?
I am trying to access a DVD mounted on a machine running Fedora12 (192.168.0.105). I thought this should be possible with NFS, but the above error message is what I keep getting, no matter what I try. Here is my mount command:
Code:
mount 192.168.0.105:/mnt/dvd -t nfs /tmp/scaleo
I now tried
Code:
mount 192.168.0.105:/mnt/dvd -t nfs4 /tmp/scaleo
and it seems the mount succeeded. So, instead of nfs, one must write nfs4?
View 9 Replies
View Related
Jan 11, 2011
I am trying to host a local website(an wiki application) within a network. Is it necessary that all the files I need to upload should be in the var/www?
View 8 Replies
View Related
