I have a live cd of debian for powerpc and I am trying to install it on my old eMac that runs Mac OSX version 10.4. So how do I boot from the cd with or without using open firmware?
View 9 RepliesI have downloaded Debian/PowerPC_lenny from http://www.debian.org/distrib/netinst. The netinst CD or the minimal CD for some reason doesn't boot. When I put it in the CD-ROM it doesn't begin whatever it has to do. Do I need to do anything? I restart my iBook G4 (1.33 GHz PowerPC G4) several times and held the "c" button (for CD-ROM) but nothing has happened. I wonder if someone can help me begin the installation process.
FYI, I have partitioned my hard drive into two volumes. I would like to install Debian in one of them. I *do not* want my Mac OS X to get disappeared in the Debian installation process. So please help me if you would as to how I can (1) boot Debian minimal CD and (2) install Debian on one of the two volumes I have on my iBook.
I have an emac powerpc that runs Mac OSX version 10.4. I am having trouble booting from a live cd. Holding down C does not work an I have tried different commands in open firmware and none of them work.
View 7 Replies View RelatedI am thinking to turn a pretty old Mac Mini with 1.42Ghz PowerPC to Debian. Any thing I should be aware of?
View 1 Replies View RelatedDebian Squeeze freezes with blurred image and no access to other terminals after installation or internet upgrade from Lenny. Lenny works fine.So how could Debian Squeeze be installed or be upgraded from Lenny on PPC without this problem?
View 2 Replies View RelatedI installed the powerpc version of Debian Squeeze 6.0.1a on an eMac. According to the Wikipedia article, these systems had an nVidia geforce2 MX graphics card, and the system is using the Debian open nVidia drivers from install. I've gotten everything working on it, except the graphics are off. It's acting like either it can't handle the resolution or all the colors and looks a little like it wants to run in 256 colors. It's not unusable, just annoying. I know that it can handle a normal resolution because it was doing fine under Mac OS X puma before I wiped it and installed debian (I put debian on it because I needed a modern web browser, and the ones available under that version of Mac OS X weren't doing the job). I went to the nVidia website, but they only have the driver for x86 Linux. I need it for the G4 powerpc. Any ideas? I'm used to running Ubuntu on x86 machines, so the powerpc thing is throwing me a bit.
View 4 Replies View RelatedI've tried to compile it by myself, but since I do not know all libraries / compiler programs and assistant programs to be installed beforhand, great frustration has appeared ("g++ not available" etc. ...)Is anybody here who can publish a simple and perfectly understandable tutorial of how to compile Truecrypt for PowerPC architecture from source?
View 1 Replies View RelatedCurrently this PC has Ubuntu installed on it and it barely boots from HDD but crashes at logon, and just loops back to the boot device select screen when CD is selected.
I'm wondering if there is anyway to install a version of Debian on the G5 using my windows 7 tower PC and a spare SATA HDD?
Specs:
CPU : 2x PowerPC 970fx 2.0GHz (x64)
RAM : 2GB DDR
GPU : GeForce FX 5200 Ultra 64MB
I am new using linux and don't have too much experience in terminal, however I am curious and work hard. I have an imac G5 powerpc with 2g processor, 768 mb ram and 232.7g hard disk. I recentrly installed debian 8.0.0 (jessie) with xfce environement. I have three other computers (two with xununtu runing and one with windows) using dropbox to sync all my work in differents places, so I use dropbox to get all synchronized. I don't want to change all the pc's to other cloud service, I would like to install dropbox in this machine.
I installed libnet-dropbox-api-perl, pear-channels and pho-dropbox packages from the synptic package manager with the hope to use dropbox...but I dind't even find something colled dropbox in the pc.
My question is: is it possible to install and use dropbox in this powerpc machine ? if yes, is there a tuto (for dumps) to get it ?
Just wondering if there were any NES, SNES, etc emulators compatable with PowerPC Debian?
Not entirely sure if they will run well, but can't hurt to give it a try.
Looking for the binutils for powerpc in squeeze.
Found a reference here: [URL] ....
But the file [URL] ... is missing, has this been removed or what?
I have just installed Squeeze on my 5+ year old iBook G4 and it runs quite nicely and quite fast! I am very happy with it overall. Finally I have been able toinstall Debian on a piece of hardware. Dual boot is generally hopeless on Macs. So this is a single boot setup and I am quite happy with it. I have two major issues right now:1. There's something wrong with the sound system. I get the following error message when I clickon the small x to the right of Volume Control (on the upper right corner of my screen). See attached screen shot.
View 3 Replies View RelatedI am wanting to get be able to upload and get stuff from dropbox on my powerpc install of wheezy. Debian does not have the app for powerpc machine in stable or testing. There is a thunar extension in sid but i do not want to risk breaking my system so I decided to grab the wheezy source and compile myself. I am sure I have all the dependencies however I am I am getting this error. See below
rican-linux@debian-ppc:~/Build/source/nautilus-dropbox-1.4.0$ debuild -us -uc
dpkg-buildpackage -rfakeroot -D -us -uc
dpkg-buildpackage: source package nautilus-dropbox
dpkg-buildpackage: source version 1.4.0-3
dpkg-buildpackage: source changed by Raphaël Hertzog <hertzog@debian.org>
[Code] .....
is there a possibility to install nspluginwrapper (to use for flash-plugin from adobe) on Lenny on a PowerPc (IBook G4)?
View 2 Replies View RelatedI've been trying to set up MintPPC on my girlfriend's old iBook. I started with the debian squeeze installation from a burned cd. Everything went fine and i booted into the new system.
No matter what I try to install I get that error, with different sectors each time. I can install .debs using dpkg just fine, I can compile source code. apt-get just won't work.I've been reading about this for hours, and the machine is currently running e2fsck -c on the main filesystem. It is a more or less never ending stream of those errors with a few that reference task_pio_intr rather than dma_intr thrown in for good measure.I've been reading for hours but I haven't found anything on the google or forums that matches my problem(or atleast not that I could understand).
From my research I've tried hdparm to change the DMA mode, slower and faster and no luck, removing the .bins in one of the apt folders, and reinstalling debian.I've read the posts I could find on here, and mostly the problem seemed to be intermittent for them. For me it is only when I use apt-get, and now apparently e2fsck(badblocks). It happens every single time with apt, I can't use it to install anything. But i've done plenty of other file operations without a bump.Any suggestions would be most welcome! Especially an in depth explanation of what that message means. I'm happy to do my own research and work, I just have no idea what's going on!
I have a first gen mac mini g4 with a non-functioning cdrom drive and no mac os installation in place. I'm attempting to install natty (really any ubuntu OS that will work) through an external usb drive. The only functional machine at my disposal for preparing and partitioning the external usb drive is a seperate intel ubuntu box. I understand that I need to create an Apple_Bootstrap partition with yaboot installed inside so openfirmware can recognize the usb drive as bootable.
how do I create an Apple_Bootstrap partition on my external usb drive through a regular x86 ubuntu box? is "mac-disk" or pdisk commands available for x86 machines if not how or where could I find software to do the job?
I need help finding some software / or anything to make an installable image or live CD of my Debian OS on a PowerPC iBook. I've tried a few options, but i can't seem to get any of them working because of the PowerPC.
View 14 Replies View RelatedI am planning to do a full install of Ubuntu 10.04 on my eMac G4 Power PC (PPC). It has 512 MB of RAM, 40 GB of space, and its running Mac 10.4.11 Tiger.
I need help booting off the DVD. Can anyone Give me a guide on how to install Ubuntu 10.04 on a old eMac G4 Power PC?
I plan to install this instead of the Mac OS because it is very slow and buggy.
This problem of mounting usb-sticks has cropped up after installing debian-5.0.4 anew. Whenever I am attaching the usb the lower panel shows JetFlash TS2GJFV30 (not mounted). When I am clicking on 'Mount device' a red warning sign is appering telling 'Error'. If I run terminal command 'mount /dev/disk' then error message is 'mount: can't find /dev/disk in /etc/ or /etc/mtab'.
View 6 Replies View RelatedI want to install Debian 5.06 64 bit on squeeze repo. Where can I find its netinstall ISO?
View 6 Replies View Relatedi am trying to get starting installing debian on my virtual server what is supported for IA64 and i have try'd this few different version(se bellow) and the img fail isin't boting?
debian-503-ia64-businesscard(notice diffrent version tryed to)
debian-503-ia64-CD-1(notice diffrent version tryed to)
debian-503-ia64-netinst(notice diffrent version tryed to)
I have used before virutal server and booted successfully a img file and installed a operating system sow what is wrong?
Is there stability advantages to installing the mint-meta-debian package from the repo below??? I have read that LMDE is safer than running Testing because there is less chance for breakage with LMDE. Less risky overall. Is that true?
# Linux Mint Debian Edition (I get Firefox from here)
# get the mint-keyring from the repo
deb http://packages.linuxmint.com/ debian main upstream import
I have been trying to install a command line Debian Squeeze system on n Eee PC 701., but have run into a number of problems:
1) All install info I can find assumes that the person wants to install a GUI system of some sort.
2) The Eee PC has a unique 2 MB. partition that needs to be preserved, so no guided install.
3) The Eee PC has an SSD instead of an HD. Most postings I have seen recommend an install without a swap partition, but the install (both live and text) seems to choke and despite a fresh formatting of the existing partition, claims to be overwriting existing files.
4) I can understand from the wiki that the Eee PC wireless driver (Atheros) should be included in Squeeze, but when the wireless connection and password is added, the installer claims that the password is not correct, despite me having checked it a number of times.
I hope someone can help me out. I just want to use the Eee PC for low resource stuff done on the cli like using a text based web browser to access the net through a wireless router and to hook it up to an external USB HD and to my stereo, to play my music collection.
I have installed Windows 7 on my laptop . Now, it directly boot from Windows 7 . I think the MBR overwrote my grub . I have found two methods by google , but still does work .
1: boot from debian install CD, Alt +F2 switch to the console. "grub " "root (hd0,0)" "setup (hd0,0)".
2:boot from CD, mount /dev/scsi/host0/bus0/target0/lun0/part1 /mnt ; chroot /mnt ; grub-install /dev/sda.
I installed Debian Squeeze with no issues. I went to install latest Nvidia driver as done previously with Lenny. Used instructions that worked on lenny from "the trooper" [url]
Downloaded th latest driver for my GeForce 7300 GS vidio card, driver package NVIDIA-Linux-x86-260.19.12.run
Used "method # 2 as described in HOW TO,as it worked perfectly in the past on Lenny. Only syntax I changed was instead of gdm I typed gdm3 as it appears that is the new name for gnome in Squeeze.
Did as folows:
Now the trouble showed up, Unfortunatly I can only go off my memory. A question was asked stating that something did not match, it needed a 3 and the driver had a 4 version or somethng of this sort. then it asked if I new what I was doing (and I lied) and selected yes. And whammo, it didn't work. (This question was asked when i did in Lenny and it is working perfectly still on that system). I now can not boot to GUI, I notice when system boots it starts in "S" mode although I select normal boot from grub2.
Not too bad if I got to reinstall as little is on the system. I just want to know what I am missing on the instalation deal or should I be going about this difrently with Squeeze.
Now that Etch is on archive.debian.org - how do I get the Debian installer to install it (via. net)?Before everyone shouts "upgrade to Lenny" - I need Etch for a reason.Simply putting archive.debian.org as the install mirror doesn't work either.
View 10 Replies View Relatedso a friend of mine that really liked the Debian Linux I had, had me install it it on his hard drive. I stupidly believed him when he said that he wasn't going to go back to windows, but now he wants to. This was almost a year ago and now that his entire hard drive is formatted to linux (with more than 40 gigs in programs and files) I was wondering if I could install windows XP on the second hard drive (currently not being used) then re-run grub from an install CD to recognize both the WIndows and Linux installations.
View 6 Replies View RelatedI've been using Ubuntu since 8.04 and I'm getting tired of it. Every time I update to the latest version, even if I wait awhile, something always breaks. I want an OS that I can update without having to worry about something breaking and I hear that Debian is great for that. I'll be installing it in a few hours when I get back from Iron Man 2. I just created this thread because I know I'm going to have questions. Don't worry, I'll try to solve any problems I come across myself before asking here. I'll be installing Debian Stable because I figure that'll be good enough for me.
View 14 Replies View RelatedI was wondering. Up till now whenever I installed Linux I've either dual booted with Windows off 1 HDD, or installed straight Linux by itself. However, I recently purchased a second HDD for my computer, and was wondering how I could go about installing Debian on the second drive without messing with the windows drive? Right now I have Windows 7 installed on my 1TB drive, and would like to try and install Debian on my second (750GB) drive. Would it be possible to install Debian on the second drive, install grub on that drive's MBR so I could choose between Debian and Win7 without touching the MBR on the 1TB Windows drive?
I'm paranoid about messing up my Seven installation, but really want to be able to load into Debian as well.
After installing Debian Testing from the business card ISO via unetbootin, without a DE or WM, I log into root and get an error. The error is INIT: ID "co" respawning too fast: disabled for 5 minutes. I see the "co" line in /etc/inittab but I don't know what to do. How do I fix this error?
View 6 Replies View Related