Debian Squeeze freezes with blurred image and no access to other terminals after installation or internet upgrade from Lenny. Lenny works fine.So how could Debian Squeeze be installed or be upgraded from Lenny on PPC without this problem?
View 2 RepliesI've tried to compile it by myself, but since I do not know all libraries / compiler programs and assistant programs to be installed beforhand, great frustration has appeared ("g++ not available" etc. ...)Is anybody here who can publish a simple and perfectly understandable tutorial of how to compile Truecrypt for PowerPC architecture from source?
View 1 Replies View RelatedLooking for the binutils for powerpc in squeeze.
Found a reference here: [URL] ....
But the file [URL] ... is missing, has this been removed or what?
I've been trying to set up MintPPC on my girlfriend's old iBook. I started with the debian squeeze installation from a burned cd. Everything went fine and i booted into the new system.
No matter what I try to install I get that error, with different sectors each time. I can install .debs using dpkg just fine, I can compile source code. apt-get just won't work.I've been reading about this for hours, and the machine is currently running e2fsck -c on the main filesystem. It is a more or less never ending stream of those errors with a few that reference task_pio_intr rather than dma_intr thrown in for good measure.I've been reading for hours but I haven't found anything on the google or forums that matches my problem(or atleast not that I could understand).
From my research I've tried hdparm to change the DMA mode, slower and faster and no luck, removing the .bins in one of the apt folders, and reinstalling debian.I've read the posts I could find on here, and mostly the problem seemed to be intermittent for them. For me it is only when I use apt-get, and now apparently e2fsck(badblocks). It happens every single time with apt, I can't use it to install anything. But i've done plenty of other file operations without a bump.Any suggestions would be most welcome! Especially an in depth explanation of what that message means. I'm happy to do my own research and work, I just have no idea what's going on!
I have downloaded Debian/PowerPC_lenny from http://www.debian.org/distrib/netinst. The netinst CD or the minimal CD for some reason doesn't boot. When I put it in the CD-ROM it doesn't begin whatever it has to do. Do I need to do anything? I restart my iBook G4 (1.33 GHz PowerPC G4) several times and held the "c" button (for CD-ROM) but nothing has happened. I wonder if someone can help me begin the installation process.
FYI, I have partitioned my hard drive into two volumes. I would like to install Debian in one of them. I *do not* want my Mac OS X to get disappeared in the Debian installation process. So please help me if you would as to how I can (1) boot Debian minimal CD and (2) install Debian on one of the two volumes I have on my iBook.
I am thinking to turn a pretty old Mac Mini with 1.42Ghz PowerPC to Debian. Any thing I should be aware of?
View 1 Replies View RelatedI have a live cd of debian for powerpc and I am trying to install it on my old eMac that runs Mac OSX version 10.4. So how do I boot from the cd with or without using open firmware?
View 9 Replies View RelatedCurrently this PC has Ubuntu installed on it and it barely boots from HDD but crashes at logon, and just loops back to the boot device select screen when CD is selected.
I'm wondering if there is anyway to install a version of Debian on the G5 using my windows 7 tower PC and a spare SATA HDD?
Specs:
CPU : 2x PowerPC 970fx 2.0GHz (x64)
RAM : 2GB DDR
GPU : GeForce FX 5200 Ultra 64MB
I am new using linux and don't have too much experience in terminal, however I am curious and work hard. I have an imac G5 powerpc with 2g processor, 768 mb ram and 232.7g hard disk. I recentrly installed debian 8.0.0 (jessie) with xfce environement. I have three other computers (two with xununtu runing and one with windows) using dropbox to sync all my work in differents places, so I use dropbox to get all synchronized. I don't want to change all the pc's to other cloud service, I would like to install dropbox in this machine.
I installed libnet-dropbox-api-perl, pear-channels and pho-dropbox packages from the synptic package manager with the hope to use dropbox...but I dind't even find something colled dropbox in the pc.
My question is: is it possible to install and use dropbox in this powerpc machine ? if yes, is there a tuto (for dumps) to get it ?
Just wondering if there were any NES, SNES, etc emulators compatable with PowerPC Debian?
Not entirely sure if they will run well, but can't hurt to give it a try.
I have just installed Squeeze on my 5+ year old iBook G4 and it runs quite nicely and quite fast! I am very happy with it overall. Finally I have been able toinstall Debian on a piece of hardware. Dual boot is generally hopeless on Macs. So this is a single boot setup and I am quite happy with it. I have two major issues right now:1. There's something wrong with the sound system. I get the following error message when I clickon the small x to the right of Volume Control (on the upper right corner of my screen). See attached screen shot.
View 3 Replies View RelatedI am wanting to get be able to upload and get stuff from dropbox on my powerpc install of wheezy. Debian does not have the app for powerpc machine in stable or testing. There is a thunar extension in sid but i do not want to risk breaking my system so I decided to grab the wheezy source and compile myself. I am sure I have all the dependencies however I am I am getting this error. See below
rican-linux@debian-ppc:~/Build/source/nautilus-dropbox-1.4.0$ debuild -us -uc
dpkg-buildpackage -rfakeroot -D -us -uc
dpkg-buildpackage: source package nautilus-dropbox
dpkg-buildpackage: source version 1.4.0-3
dpkg-buildpackage: source changed by Raphaël Hertzog <hertzog@debian.org>
[Code] .....
is there a possibility to install nspluginwrapper (to use for flash-plugin from adobe) on Lenny on a PowerPc (IBook G4)?
View 2 Replies View Relatedhow to install Dropbox for Debian Squeeze from source.Please read everything before you begin. I prepared it as I installed Dropbox for my own system. Please Note: I use sudo, you may have to use root or 'su' from the command line. If you don't know the difference between sudo and su, then you shouldn't try this until you know. At the time I did this, the lastest dropbox version was 0.6.7.
View 7 Replies View RelatedBelow is the recipe I've used to compile dwm from source on Squeeze
su
apt-get install devscripts debian-keyring
apt-get build-dep dwm
exit
It all seems to work, however debuild gave an error about secret keys. Is this a sensible procedure? What happens in the (probably unlikely) event there is another source patch?I've gone to a tiling window manager as the result of the purchase of a wide screen LCD monitor. I like to have some stuff down the right hand side when running Firefox and OpenOffice in the main panes. Any configuration tricks welcome. Modern screens are the wrong shape!
I've just install debian squeeze version, or the testing one, but I am not really happy with it. Is not listening me all the time. If I install the debian stable I don't have internet connection. Is it possible to update the kernel somehow using the testing version?
View 12 Replies View RelatedI installed Debian Squeeze with Gnome today. I'm unable to change from the default icon theme. I can change themes, but the icon theme remains default.Things I've tried:
- I've made a new user account.
- .gtkrc-2.0 in my home is auto-generated, .gtkrc.mine does not exist.
# -- THEME AUTO-WRITTEN DO NOT EDIT include "/usr/share/themes/Darklooks/gtk-2.0/gtkrc" include "/home/haunted/.gtkrc.mine"
# -- THEME AUTO-WRITTEN DO NOT EDIT
- I've tried installing a theme into my /home/.themes.
- I've reinstalled gnome-settings-daemon.
- Tried changing themes then doing a full reboot.
- Cursed it periodically.
I want to install Debian 5.06 64 bit on squeeze repo. Where can I find its netinstall ISO?
View 6 Replies View RelatedI have been trying to install a command line Debian Squeeze system on n Eee PC 701., but have run into a number of problems:
1) All install info I can find assumes that the person wants to install a GUI system of some sort.
2) The Eee PC has a unique 2 MB. partition that needs to be preserved, so no guided install.
3) The Eee PC has an SSD instead of an HD. Most postings I have seen recommend an install without a swap partition, but the install (both live and text) seems to choke and despite a fresh formatting of the existing partition, claims to be overwriting existing files.
4) I can understand from the wiki that the Eee PC wireless driver (Atheros) should be included in Squeeze, but when the wireless connection and password is added, the installer claims that the password is not correct, despite me having checked it a number of times.
I hope someone can help me out. I just want to use the Eee PC for low resource stuff done on the cli like using a text based web browser to access the net through a wireless router and to hook it up to an external USB HD and to my stereo, to play my music collection.
I installed Firestarter firewall on debian Squeeze.Now i note there is a gui available in System->Administration which apparently does not need to be running all the time - its not set up to start on boot.When I boot I notice the boot message has a line saying "Starting Firestarter firewall .... failed"When I am logged in and type "/etc/init.d/firestarter status" as the Firestarter FAQs say, I get"Firestarter is running... ... (warning)"I can run the gui manually and still same message.
View 2 Replies View RelatedI just a newbie.i want to try customize my desktop.i found a website shown linux desktop very greatfull, like this :but i don't know how to start it.any expert guys please let me know the guiding for me to start this.
View 1 Replies View RelatedFound this 'Startup Disk Creator' in Ubuntu,it is useful,how we get it install in Debian Squeeze? There's a Unetbootin for Debian,but it pull in lots of qt stuff,I don't like it.
View 2 Replies View RelatedI have installed Debian Squeeze 6.0.2.1 amd64 from DVD-1.iso (4.4 GB) and I cannot install Synaptic Package Manager or Wine because they are not in the repos.
[Code]...
Fresh install of Debian 6.0 (squeeze) and the memory shows 3.8 GB. I have 6 sticks of 2 gb on the board.
Pertinent dmesg lines: AMI BIOS detected: BIOS may corrupt low RAM, working around it.
3083MB HIGHMEM available.
883MB LOWMEM available.
Bios tests 12 gb of ram fine.
After dist-upgrade a few days ago, X refuses to kick in.
Xorg.0.log reads
Code:
Fatal server error:
no screens found
Please consult the The X.Org Foundation support at http://wiki.x.org
Please also check the log file at "/var/log/Xorg.0.log" for additional information. lshw reads that Xpress 200M is claimed by radeonfb driver.
At this moment, no fglrx packages are installed.
System is Toshiba laptop.
I do not think ATI dropped support, however, even without fglrx, nothing works.
I installed Debian Squeeze with no issues. I went to install latest Nvidia driver as done previously with Lenny. Used instructions that worked on lenny from "the trooper" [url]
Downloaded th latest driver for my GeForce 7300 GS vidio card, driver package NVIDIA-Linux-x86-260.19.12.run
Used "method # 2 as described in HOW TO,as it worked perfectly in the past on Lenny. Only syntax I changed was instead of gdm I typed gdm3 as it appears that is the new name for gnome in Squeeze.
Did as folows:
Now the trouble showed up, Unfortunatly I can only go off my memory. A question was asked stating that something did not match, it needed a 3 and the driver had a 4 version or somethng of this sort. then it asked if I new what I was doing (and I lied) and selected yes. And whammo, it didn't work. (This question was asked when i did in Lenny and it is working perfectly still on that system). I now can not boot to GUI, I notice when system boots it starts in "S" mode although I select normal boot from grub2.
Not too bad if I got to reinstall as little is on the system. I just want to know what I am missing on the instalation deal or should I be going about this difrently with Squeeze.
This topic began in the Debian Development forum here I have successfully completed both the install and the after installation configuration. I have a fully functional system on this little baby, inspite of the fact that wireless (Broadcom bcm4312), ethernet (Realtek) and sound were initially broken.
There is a lot of assistance out there on the web. In the previous thread, I was having trouble installing any debian on a usb stick. The issues that needed resolving were 1. Bad stick
2. Incompatible kernels between boot.img and .iso
3. The method of copying .iso to the stick that finally worked was wget My first successful usb install was Lenny. Even though I upgraded the stock system with lenny-backports, I could not get wireless, ethernet or sound working the only connection I could get to the internet was through my 3g stick and that was not performing up to it's capability. I manually configured wvdial to get that working.
I attempted an upgrade to squeeze several times and each time the upgrade trashed the system. I finally found squeeze boot.img and .iso files from an eee pc blog. This allowed a fresh install of Squeeze and I was making progress. The little atom processor would not handle the b43-fwcutter driver, so I compiled one from the Broadcom site written especially for the atom processor. Now I had cable broadband supplied wireless. I got my ethernet working with help from the Gnome site technical specs on Network Manager. Simply changing ifupdown=false to ifupdown=true in the network manager config file.
Sound was activated by help from a blog entitled "Debian on the Dell Mini 9" My head is spinning now or I would be more specific and instructive on all I did to get this baby up and running. If anyone asks, I may do a how-to.
PS: Posted from that Dell Mini 9 running Debian Squeeze.
EDITED: Correction of typing errors.
Debian Lenny worked just great. That was my first experience of Debian. The installer recognised all my hardware and the system was soon up and running brilliantly with a few tweaks. Confident of Debian's reliability, I decided to move to Debian 6 and did a fresh install, with downloads of the new operating system rather than a distribution upgrade. The installation routines have not worked for the same computer system. I don't know if its hardware not being recognised by Debian 6 that were recognised without a problem by Debian 5??
At first, the boot-up flipped at "Waiting for /dev to be fully populated," there was a kernal panic then Debian disappeared. No signal was sent to the monitor and I had to switch off the computer manually
I was able to look into the Debian 6 OS from Arch Linux, installed on different partitions of the same hard-drive. I am able to overwrite the Debian files as root from Arch.
My i686 machine has PATA IDE drives.
Why are 2) dbus and the 3) avahi-demon failing? I need to get them started first so that I can get an internet connection and try and correct the problem with X and the wrong Nvidia driver. Is there some configuration I can do either from Arch, where I am now, or the bash prompt on Debian? Thanks in advance.
I want to install VGA driver on debian squeeze. my VGA is "Intel Corporation 82G33/G31 Express Integrated Graphics Controller".I do not know which driver I must install for this VGA.Does Linux recognize related driver ?
View 3 Replies View RelatedI am still running the linux-image-2.6.32-5-686 kernel a computer with squeeze. I installed squeeze on it when it was unstable. I would like to bring up to the new stable state.Should I do apt-get install linux-image-2.6.32-5-686or should Iapt-get dist-upgrade
View 1 Replies View Related