I am planning to do a full install of Ubuntu 10.04 on my eMac G4 Power PC (PPC). It has 512 MB of RAM, 40 GB of space, and its running Mac 10.4.11 Tiger.
I need help booting off the DVD. Can anyone Give me a guide on how to install Ubuntu 10.04 on a old eMac G4 Power PC?
I plan to install this instead of the Mac OS because it is very slow and buggy.
I have downloaded the Ubuntu 10.04 alternate PPC to install on my old emac.
It starts fine the installation process, and I want to have only Ubuntu on this machine so I erased all the mac partitions and create 3 new partitions
/ = root
swap
and /home
Everything goes well until I get the message that there is not a partition called Apple_bootstrap and I get stuck there.
I snagged the 10.10 alternate install ISO for PPC and got it up and running on a 1ghz G4 eMac with 1gb of RAM and a 60gb HDD. It runs... OK. It could be a lot better. I'm planning to shut off the bluetooth and CUPS services since neither apply to this system; are there any other services I can shut down, or any other tricks I could do to make it run a bit more smoothly?
What about alternate window managers? I realise that the PPC platform kinda limits me, but what about TWM or FVWM?
How can I make Compiz work on this eMac? It's the original, 700 MHz, 1 GB RAM, Ubuntu 10.04. It was enough trying to get the xorg.conf file to show any video, but now I want to be able to use compiz so I can have a faster experience.
View 4 Replies View RelatedWith my ubuntu iso in the dvd drive, I do not get any boot from options for it to be used as boot drive within the boot order from the boot control panel. On startup with the alt key pressed I only get the Mac drive but when I change the boot to the other option (network) and press the alt key on startup, I get the boot order screen with the Mac HD and also the Ubuntu iso but cannot get the Ubuntu to highlight and use, just the Mac remains highlighted. On the same screen I get a very small wrist watch to the left of the screen that the mouse can move up and down but not to the side.
I am using a windows usb keyboard and usb mouse, I have used all manner of keyboard combinations to get the Ubuntu disc to highlight but nothing seems to work. Within the drive section, the "My Mac" drive is locked and cannot partition it or change anything about it. Has anyone any ideas that I can try? I did not want to get a Mac keyboard and Mouse as yet seeing as I wish to change the operating system to ubuntu.
I recently came into (temp) possession of two Original, white, 700 MHz eMacs. I have only started to play on one of these so far. Installed Ubuntu 10.04 PPC from Alternate Install CD - two times actually (because I thought I may have screwed something up the first time), but both times it seemed to go without a hitch.
After install and restart, I cannot drop into a shell, all I get is the black screen. I'm probably forgetting something really obvious, but I've tried Holding "Shift" and "F1" and control+alt+F1 (and F2, F3, F4, F5, F6), tried the esc key; with two different Apple USB keyboards. I'm really just wanting to load an xorg.conf file and reboot.
Should I have been trying to do this just after install, but before restarting? I can get into Open Firmware just fine, but have no idea what I'd do from OF except start off the CD again. I should mention I installed Debian just fine and am pretty confident MintPPC would work flawlessly, but I am trying to get Ubuntu 10.04 on here.
I have tried eject /dev/cdrom, sudo eject, pressing the eject button but whenever i do , it just opens for like 1 second then closes right back. is this fixable within Xubuntu, or is this a physical problem with the cd drive?
View 4 Replies View RelatedI am putting ubuntu onto a ppc (emac 1.25Ghz) and I was wondering weather to go with the last officially supported release (6.10) or to try the newest (10.10)?
The machine will only be used to play music and brows the web, nothing heavy but it MUST play flash content (primarily from .....). I have had varying degrees of success on an older G4 ppc (700 Mhz) but never got it to play flash. are the open source alternatives to flash any good on the machine?
how I could file share, or make the whole Hard Drive (HDD) accessible to another computer. The two other computers I have are a Toshiba Laptop with Ethernet and USB, and a iMac Intel with Firewire, USB, and Ethernet. Putting these to use along with:
Three Ethernet Cables
Two Printer Peripheral USB Cables
The Two Computers
A 2GB Flash Drive
That is all I can think of right now. I do not want to use CDs. In a way, I would like to do a network boot. So, how do I get the whole HDD visible to the others computers (either/both) and be able to write to it? I want to put Xubuntu on it, and earse the rest of the Hard Drive. The computers getting this are the iMac G3s and the eMac G4. The eMac has 256MB RAM, 40GB HDD, and a 700MHz processor. Two iMacs have 128MB RAM, 40GB HDD, and a 600MHz Processor. The other iMac is the same as the rest but has a 500MHz processor.
I installed Ubuntu on my G4 I tried it on my G3. it booted off the Live CD fine but when I launched the installer it would crash. I'm not planing to install it on there but I'm wondering why it did that?
View 3 Replies View RelatedI'm just about to be given a Power Mac G5 (Late 2005) Dual 2.0GHz. I think this was the last G5 produced.I plan on using it as file server/NAS and will probably run 10.04 LTS (or maybe 8.04 LTS). I would install a SATA RAID controller and run 4 1TB drives in a RAID 5 configuration. The only thing I'm unsure about is choosing a compatible RAID controller. I need to find a RAID controller that
- Is PCIe
- Is compatible with both the Power Mac and Ubuntu PPC
- Does true hardware RAID
- Doesn't cost a fortune!
Am I right in thinking that the card might need to be open firmware compatible? If it makes any difference, I plan on running the OS from a separate 5th drive. I've found this on eBay. I asked the seller and he claims it supports true hardware RAID and says the chipset is a Silicon Image SIL3124. I does seem suspiciously cheap though...
I have a live cd of debian for powerpc and I am trying to install it on my old eMac that runs Mac OSX version 10.4. So how do I boot from the cd with or without using open firmware?
View 9 Replies View RelatedI am having several problems with what i believe to be gnome-power-management. Power management will randomly say that either i do, or don't have a battery. This means that the icon in the notification area does not appear, and I can not access the settings for on battery power. also, when i tell Ubuntu to suspend, it just goes to the screensaver and nothing happens. conky is still able to read the battery just fine, its power management thats having problems.
View 9 Replies View RelatedI'm running 2.6.35 on a macbook Air. Since Hal is being deprecated I got rid of it but now I cannot control brightness with the keyboard.Looking at the code on gnome-power-manager, if it doesn't find hal it defaults to xrandr, but I couldn't find a way of controlling brightness with xrandr. Also, I don't see any keybindings on XF86MonBrightness{Down,UP} with gnome-keybindings-properties.I'm loading mactel's nvidia_bl module which creates /sys/class/backlight/nvidia_backlight and from there I can just adjust brightness by editing the corresponding file.
View 1 Replies View RelatedA MacBook Pro here (1151A, 1,2?, anyway a 2006 model). Ubuntu 8.04
When the power cable comes out, the laptop blacks out. I mean, it kind of goes into sleep mode, but only with the screen going dark. Anything running keeps running.
I know it is a bug, and I did my homework. I researched it. It usually comes to the point where you need to disable an "event" on "power cable out" in the power management settings of gnome. I did that, but the problem is still there.
I was turning off the computer before, loosing all my work, because there is no way to bring the display back. However recently I discovered two work arounds:
1) Restart X server: CTRL+ALT+BACKSPACE (you loose stuff)
2) FN+CTRL+ALT+F7 which takes you back to your desktop, you do not loose anything.
I've just installed Ubuntu 9.10 on an old PowerBook G4 I have, and when I go to Power Management, it doesn't provide the tab for battery-related settings (nor do I get the little battery/charge icon in the upper-right panel). I'm comparing this to the version of Ubuntu 9.10 I installed on my EeePC netbook, where those things are present. Is there anything I can do to get the Power Management preferences to recognize that the machine has a battery?
If it helps: the PowerBook had Ubuntu installed on it using the 9.10 "alternate" .iso, as I was having trouble burning the "desktop" .iso to a CD.
haven't been around here in a while, seems that the other OS section is completely gone, so I assume this would be the most appropriate place to ask this, since Debian and Ubuntu are similar enough. Okay, so I installed Debian Lenny on my Power Mac G3. 450MHz, 1GB RAM, and an ATI Rage128, the stock video card. It also has a Linksys WMP54G Wireless card which I got working effortlessly enough.
My issue is with the screen resolution. The driver for the graphics card is installed, but I'm only getting a 800x600 resolution. My Monitor is a 1440x900 screen, so everything's quite out of proportion. I assume I may have to go into xorg.conf to tweak things, but I wouldn't know what to tweak. This is the only thing I need to do to make this my full time OS on this machine.
im installing ubuntu onto a friends ibook, but am first running it live off the disk. it runs well, except for one thing, the display has a problem,i guess it seems like its tiled on the monitor, instead of fullscreen, it has a full desktop taking about 2/3 of the monitor, a sliver of the same desktop right below it, and a line of black to the right.
View 6 Replies View Relatedeven after applying the patch from this thread [URL] my battery is still not displaying an icon and a tab is not present on the power manager. I use an ibook g3 dual usb. though i didn't restart after applying the patch as it was not mentioned to do so.
View 1 Replies View RelatedI am running OSX Tiger (10.4.11) here on my trusty old G4 MDD with a "giga" 1.4gig CPU accelerator and doing quite well with it actually.I have discovered Gimp and Inkscape and love the open source concept.I registered only a few days ago, and have been lurking around to see if I can get a look at Ubuntu in action.Would it be possible to install some version of Ubuntu on a partition of one of my internal hard drives and be able to boot it, using the option key at power-up time?I guess this would be called a "dual-boot" situation.If so, can someone provide a link as to what to download.
View 5 Replies View RelatedI've had a Apple Powerbook G4 for a while now, but being mostly a Windows user I've never used it. I remember when it ran it's native OSX (Which I can't for the life remember) Probably Tiger? Anyways... I tried installing Ubuntu on it about a year and a half ago, the installation was botched and I left it sitting there with no purpose in life. :O
So I've decided to dust the laptop and give it another go. I've progressed a little further with my Linux experience, having installed and tested a few distros and even switching over to Ubuntu 9.10 for about 4 months. Enough of my life story and more to the point.Has anyone installed Ubuntu, or any distro for that matter on the Apple Powerbook G4? I know there are different versions of the G4 and I'm not entirely sure what my version is, It's the 1.6Ghz version with The Nvidia card (Err I think) and extra Wireless card installed. I am not very capable with Mac - After checking Apples website I believe it's the 15inch.
I've read the FAQ thread and will begin trying to install Ubuntu tonight at home, I just wanted some suggestion and some pointers in the right direction. What distro would be most suitable for my hardware? and What is easiest to set up?
Well currently I am having a problem on the installation, when it goes to step 3 "keyboard layout" and I press forward it just stays there loading and does not proceed. It does not freezes or anything but stays there forever and does no proceed to next step. Burned another live-cd thinking it may be the disk itself but still no luck.
View 3 Replies View RelatedOk my girlfriend has mac and she wants to play games and we will be useing the wineHQ. I've already looked up games thatwork for it and its good. Well is there away to install ubuntu through bootcamp?
her specs is-
Could i get some instructions? We were currently gonna install windows but it wouldn't work cuz we didnt have the original cd. Bootcamp already has a partition setaside already. Her mac is a Macbook pro
I would like to know, how could I install ubuntu on Mac. I've gone through the following guide, but there is no option for my machine MacBook Pro 6.2.
Code:
[URL].. BTW, i would like to have dual-boot option with Mac OSX pre-installed.
I have an old PowerMac G4 without the original harddrive or OS. What is the best way to install ubuntu 10.04 onto this machine?
View 3 Replies View RelatedI'm stuck with a problem trying to boot an Ubuntu Desktop 10.10 x64 CD into a white Macbook (2.1 gen, Core2Duo ) I've installed rEFIt, and synchronized GPT with MBR - all ok.
But when I insert the cd (works ok, the same CD on a DELL laptop ) and boot it via rEFIt, the computer hangs with this console message
Code:
1.
2.
Boot from Ubuntu CD-ROM:_
And I can't go further... anyone knows ?
I have an ibook g3 that I'm trying to resurrect with Ubuntu 10.04. However, booting into live CD always freezes it at some point in the installation process. I got it installed but everything takes five minutes to open. any way to make it faster?
View 4 Replies View RelatedI've been trying to install 11.04 on my MacBook Pro for the past couple weeks, and I'm getting pretty frustrated with it. When I try to boot from a DVD, I either get a blank screen with just a flashing cursor, or it will ask me if I want to try, install, or verify the disc, after which I will get a bunch of different-colored blocks all around the screen.
I have installed past versions of Ubuntu on this computer with no problems, so I'm pretty stumped now on why I'm having this problem. Also, I've tried the Ubuntu Wiki and sticky thread on this forum, but nothing in either seems to help. Additionally, I have installed Mac OS X 10.7 Lion. I don't think it'd effect anything, but I thought it was worth mentioning.
I'm trying to install Ubuntu 10.04 PPC on to an Western Digital External USB 1TB drive to run on a:
eMac G4
1ghz
1GB RAM
I would like to only use like 40GB of the 1TB External. I get to the part where I can Manual edit partition tables and am lost on how to do this.
I want to install Ubuntu 10.04 PPC along side my mac OS on a partition on the inter hard drive that I created with 10.5 disk utility. When I get to the part in the Ubuntu installer where it ask where to install I only see the whole hard drive and not the partition I made, and when I go into the partition menu I click on it there but it won't let me install it.
View 8 Replies View Related
