so a friend of mine that really liked the Debian Linux I had, had me install it it on his hard drive. I stupidly believed him when he said that he wasn't going to go back to windows, but now he wants to. This was almost a year ago and now that his entire hard drive is formatted to linux (with more than 40 gigs in programs and files) I was wondering if I could install windows XP on the second hard drive (currently not being used) then re-run grub from an install CD to recognize both the WIndows and Linux installations.
This problem of mounting usb-sticks has cropped up after installing debian-5.0.4 anew. Whenever I am attaching the usb the lower panel shows JetFlash TS2GJFV30 (not mounted). When I am clicking on 'Mount device' a red warning sign is appering telling 'Error'. If I run terminal command 'mount /dev/disk' then error message is 'mount: can't find /dev/disk in /etc/ or /etc/mtab'.
i am trying to get starting installing debian on my virtual server what is supported for IA64 and i have try'd this few different version(se bellow) and the img fail isin't boting?
debian-503-ia64-businesscard(notice diffrent version tryed to) debian-503-ia64-CD-1(notice diffrent version tryed to) debian-503-ia64-netinst(notice diffrent version tryed to)
I have used before virutal server and booted successfully a img file and installed a operating system sow what is wrong?
Is there stability advantages to installing the mint-meta-debian package from the repo below??? I have read that LMDE is safer than running Testing because there is less chance for breakage with LMDE. Less risky overall. Is that true?
# Linux Mint Debian Edition (I get Firefox from here) # get the mint-keyring from the repo deb http://packages.linuxmint.com/ debian main upstream import
I have been trying to install a command line Debian Squeeze system on n Eee PC 701., but have run into a number of problems:
1) All install info I can find assumes that the person wants to install a GUI system of some sort. 2) The Eee PC has a unique 2 MB. partition that needs to be preserved, so no guided install. 3) The Eee PC has an SSD instead of an HD. Most postings I have seen recommend an install without a swap partition, but the install (both live and text) seems to choke and despite a fresh formatting of the existing partition, claims to be overwriting existing files. 4) I can understand from the wiki that the Eee PC wireless driver (Atheros) should be included in Squeeze, but when the wireless connection and password is added, the installer claims that the password is not correct, despite me having checked it a number of times.
I hope someone can help me out. I just want to use the Eee PC for low resource stuff done on the cli like using a text based web browser to access the net through a wireless router and to hook it up to an external USB HD and to my stereo, to play my music collection.
I have installed Windows 7 on my laptop . Now, it directly boot from Windows 7 . I think the MBR overwrote my grub . I have found two methods by google , but still does work . 1: boot from debian install CD, Alt +F2 switch to the console. "grub " "root (hd0,0)" "setup (hd0,0)". 2:boot from CD, mount /dev/scsi/host0/bus0/target0/lun0/part1 /mnt ; chroot /mnt ; grub-install /dev/sda.
I installed Debian Squeeze with no issues. I went to install latest Nvidia driver as done previously with Lenny. Used instructions that worked on lenny from "the trooper" [url]
Downloaded th latest driver for my GeForce 7300 GS vidio card, driver package NVIDIA-Linux-x86-260.19.12.run
Used "method # 2 as described in HOW TO,as it worked perfectly in the past on Lenny. Only syntax I changed was instead of gdm I typed gdm3 as it appears that is the new name for gnome in Squeeze.
Did as folows:
Now the trouble showed up, Unfortunatly I can only go off my memory. A question was asked stating that something did not match, it needed a 3 and the driver had a 4 version or somethng of this sort. then it asked if I new what I was doing (and I lied) and selected yes. And whammo, it didn't work. (This question was asked when i did in Lenny and it is working perfectly still on that system). I now can not boot to GUI, I notice when system boots it starts in "S" mode although I select normal boot from grub2.
Not too bad if I got to reinstall as little is on the system. I just want to know what I am missing on the instalation deal or should I be going about this difrently with Squeeze.
I have downloaded Debian/PowerPC_lenny from http://www.debian.org/distrib/netinst. The netinst CD or the minimal CD for some reason doesn't boot. When I put it in the CD-ROM it doesn't begin whatever it has to do. Do I need to do anything? I restart my iBook G4 (1.33 GHz PowerPC G4) several times and held the "c" button (for CD-ROM) but nothing has happened. I wonder if someone can help me begin the installation process.
FYI, I have partitioned my hard drive into two volumes. I would like to install Debian in one of them. I *do not* want my Mac OS X to get disappeared in the Debian installation process. So please help me if you would as to how I can (1) boot Debian minimal CD and (2) install Debian on one of the two volumes I have on my iBook.
I'm just wondering if it's possible to install "fedora"'s gnome-packagekit with it's GUI (gpk-application) in debian squeeze rather than installing "ubuntu" software center? Are there packages availabe in .deb file format in any repository?
I have a live cd of debian for powerpc and I am trying to install it on my old eMac that runs Mac OSX version 10.4. So how do I boot from the cd with or without using open firmware?
Now that Etch is on archive.debian.org - how do I get the Debian installer to install it (via. net)?Before everyone shouts "upgrade to Lenny" - I need Etch for a reason.Simply putting archive.debian.org as the install mirror doesn't work either.
I've been using Ubuntu since 8.04 and I'm getting tired of it. Every time I update to the latest version, even if I wait awhile, something always breaks. I want an OS that I can update without having to worry about something breaking and I hear that Debian is great for that. I'll be installing it in a few hours when I get back from Iron Man 2. I just created this thread because I know I'm going to have questions. Don't worry, I'll try to solve any problems I come across myself before asking here. I'll be installing Debian Stable because I figure that'll be good enough for me.
I was wondering. Up till now whenever I installed Linux I've either dual booted with Windows off 1 HDD, or installed straight Linux by itself. However, I recently purchased a second HDD for my computer, and was wondering how I could go about installing Debian on the second drive without messing with the windows drive? Right now I have Windows 7 installed on my 1TB drive, and would like to try and install Debian on my second (750GB) drive. Would it be possible to install Debian on the second drive, install grub on that drive's MBR so I could choose between Debian and Win7 without touching the MBR on the 1TB Windows drive?
I'm paranoid about messing up my Seven installation, but really want to be able to load into Debian as well.
After installing Debian Testing from the business card ISO via unetbootin, without a DE or WM, I log into root and get an error. The error is INIT: ID "co" respawning too fast: disabled for 5 minutes. I see the "co" line in /etc/inittab but I don't know what to do. How do I fix this error?
I got two harddisks, sda and sdb. Is it possible to install Debian root into software raid partitions sda2 and sdb1 leaving all other partitions 'normal' (not-raid)? do partitions sda2 and sdb1 need to be exact same size and position?
I have rtl8187se linux driver, during installation in debian linux it tells that "the kernel is not a generic". How can i install this driver in default debian kernel (without generic)?
I have been learning Debian by using a virtual machine. After fine-tuning my installation procedure, I decided to copy that installation to my physical system. The hard drive already has another Linux based system installed. I plan to dual boot.After copying files I updated fstab and menu.lst.The partition scheme between the virtual and physical environments are similar, but the partitions are not mapped exactly the same.Thus the Debian system on the physical hard drive fails to boot simply because the initrd is created for the root partition location on the virtual machine. The initrd created in the virtual machine is looking for the root file system on /dev/hda1 whereas on my physical drive the new location is /dev/sda7.How can I rebuild the initrd on the physical system? I started to use the installation DVD in rescue mode, but I did not get too far.
I down loaded Debian 5.0.4 and burned it to CD (several times I might add till it was right) and now the computer I'm putting it on wont acknowledge it as a boot disk and load. It does not have a problem with my windows cd, which has a crack and the start of all my problems, But not the Debian CD-1 disk. what now? The computer is an IBM thinkpad a22p. Everything works as far as I can tell. But I was going to reinstall Windows and failed in that because of a small crack on the edge of the disk that stopped the install and any hope of accessing the file on the laptop. Microsoft does not support windows xp any longer, you must buy windows 7, but the ibm will not run it due to processor speed and ram limitations. But it will run linux and I'm willing to try it just to get out of microsoft control.
Idon't know what else to do. This is the link to where I downloaded the software ( [URL] ). The others five that i downloaded were on the same page that I got this one. Are there bad files here? Is there a missing file in the disc?
How to best manage partitioning when install programs not from debian repositories?I just discovered that Debian installs applications not from repositories to /opt and /lib. Both directories or folders reside in root (/) partition.Having made my root (/) partition (which is only around 500MB) -- more than sufficient for holding a couple of linux images but NOT good for holding application.What is the best solution for resolving this? It's annoying and worrying that my system always reminds of a close to full capacity root partition.
how to install Dropbox for Debian Squeeze from source.Please read everything before you begin. I prepared it as I installed Dropbox for my own system. Please Note: I use sudo, you may have to use root or 'su' from the command line. If you don't know the difference between sudo and su, then you shouldn't try this until you know. At the time I did this, the lastest dropbox version was 0.6.7.
I have an harddisk which is old, since many years >10 years, and I recall I crashed few clusters using windows programs which were old and harddisk stuffs doing. So the pc lives with bad clusters, this pc lives very well since many years.Question, the pc has woody debian, which let us to install and exclude bad sectors during install. Bad clusters was an usual thing in the past, but today not anymore.Unfortunately debian squeeze installer coders had the good idea to remove the " bad cluster checking " before installing debian, during install (cdrom netinst).
I'm somewhat familiar with Ubuntu (familiar but not sharp!) but have never tried Debian OS until now. I've installed Debian 5 64bit as a guest on a Mac host. I'm impressed how smooth the install went; even installing VB Guest Additions went smoothly. But, I get a "Your system had a kernel failure" error after booting. I have searched the forum & didn't find this error. Everything seems to work okay but is there an update that isn't showing in the Update Manager? Could this have something to do with VirtualBox 3.1.4?
I am running Debian testing on my box and iceweasel 5 with several addons. My question is the following: is there a way to export above all my addons settings to a file? I would like to be able to install on another debian machine the same iceweasel 5 and have the same addons installed (if I could have even the same toolbar it would be dream) automatically.
I don't think it is, as the scenario is slightly weird, and the chances of something going wrong probably too high to make it appealing, but since I have the eternal noob complex I decided to ask. So this is the situation. I had debian in a hdd on a laptop, removed the hdd, put a new one, installed windows (I didn't want, but I had to) and left the space of the old hdd + 20GB to put debian again.
I want my debian back, but I don't want to cause any problem with the windows installation because it can be extremely painful to go through it again. I have my old debian in a hdd and will soon get a hdd case to connect it with usb, that would let me even to boot using the usb. So far I thought of having a list of installed packages in the old debian, reinstall them all, copy the home folders and some configuration files, like cups and some stuff, maybe the whole /etc (I'd have to check the contents of /etc I don't know at this moment if something should be kept in the new installation)
I am installing debian onto my external usb hdd, through sun virtual box. The problem is that every time i reboot my hdd the instalation disappears and i need to go through it all again, am i doing something wrong ? or is it not meant to be on an external hdd ?
After installing debian 5.0.4 basic from first dvd, I extracted all other dvd images to hard disk and pointed /etc/apt/sources.list point to all these directories. after refreshing using synaptic package manager, I got list of all 20,000+ packages, and did a "apt-get -y install ......(all 20,000 names)". It failed due to some conflicts. So I used "--force-yes -f " option as well.
It went on for nearly two days to install everything. (in between due to power failure, something was done half way and was able to login to KDE boot option and see lots of software installed.) After complete install - it shows a startup screen of Debian EDu - but fails to boot up.
Is there a way to install all softwares + all XWindow systems simultaneously?
I have installed Windows 7 Ultimate 7600 on my HP500 Laptop, but I want to try other linux distro such as Debian. I have installed Debian 5.0.3 with VMware Workstation 7.0.1 on my machine instead of really installed it. Details is as follows: 1.Download vmware 7.0.1 and Debian Lenny 5.0.3 seperately.
2.Host Win 7 Ultimate 7600: configure the local connection to "internet connection share",choose "VMware Network Adapter VMnet1" Guest Debian 5.0.3: NAT + DHCP 3. Configurate /etc/apt/source.lists Add these lines on /etc/apt/sources.list:
