I have an emac powerpc that runs Mac OSX version 10.4. I am having trouble booting from a live cd. Holding down C does not work an I have tried different commands in open firmware and none of them work.
View 7 Replies
I have a live cd of debian for powerpc and I am trying to install it on my old eMac that runs Mac OSX version 10.4. So how do I boot from the cd with or without using open firmware?
View 9 Replies View RelatedI've just tried installing Ubuntu 10.04 on my powerpc. It installed fine, and booted first time ok, but since restarting it just seems to boot into a black screen. My monitor says 'going to sleep mode'
I don't think it's hanging on anything, as I can hear sounds if I play around with the keyboard. Could this be something to do with the resolution being too high? If so, can anyone tell me how I go about changing this?
How can I resume a stopped job in Linux? I was using emacs and accidentally hit ctrl-z which blasted me back to the console. I can see it when I type 'jobs'
[*****]$ jobs
[1]+ Stopped
emacs test_queue.cpp
I have a linux source (linux-2.4.1) which is for intel. I am using powerpc compiler and I need to compile this linux source for powerpc. I did cross compilation, but it dint workout well. How to do it.
View 5 Replies View RelatedI have downloaded the debian package of libXcomposite for powerpc. In the package I find -rw-r--r-- 1 root root 7222 2008-05-30 18:22 libXcomposite.a lrwxrwxrwx 1 root root 22 2010-05-11 14:24 libXcomposite.so -> libXcomposite.so.1.0.0 drwxr-xr-x 2 root root 4096 2010-05-11 18:05 pkgconfig but no libXcomposite.so.1.0.0 file. Can you tell me how to get this file for powerpc. I have tried several debian package and all have same.
View 1 Replies View RelatedI'm trying to build the glibc-2.3.6 (with debug symbols) for a powerpc system. I need to compile this libraries with gcc 4.1.1 and binutils 2.16.1.
All my tentatives fails and I don't know how to start with the process of building.
I read that AMANDA is only for Intel processors, but I have a PowerPC processor and I want to install AMANDA.Someone said that I have to find the distro of my RH and there should be AMANDA packages available.
My distro is: Red Hat Enterprise Linux AS release 4 (Nahant Update 7)Where can i find AMANDA for my distro??
i got an old imac powerpc g3 that i want to put into use again:
[url]
it is currently running the mac os (tiger) and still seem to be very slow...
so i am wondering if there is a small and fast ppc linux distro and would run on it? nothing too fancy i don't need the 3d cube but it would be great if it can stream videos videos, use pidgin and firefox... just an internet terminal for guests... which the mac os just doesn't cut it as of now, it is just too slow...
I've been trying to set up MintPPC on my girlfriend's old iBook. I started with the debian squeeze installation from a burned cd. Everything went fine and i booted into the new system.
No matter what I try to install I get that error, with different sectors each time. I can install .debs using dpkg just fine, I can compile source code. apt-get just won't work.I've been reading about this for hours, and the machine is currently running e2fsck -c on the main filesystem. It is a more or less never ending stream of those errors with a few that reference task_pio_intr rather than dma_intr thrown in for good measure.I've been reading for hours but I haven't found anything on the google or forums that matches my problem(or atleast not that I could understand).
From my research I've tried hdparm to change the DMA mode, slower and faster and no luck, removing the .bins in one of the apt folders, and reinstalling debian.I've read the posts I could find on here, and mostly the problem seemed to be intermittent for them. For me it is only when I use apt-get, and now apparently e2fsck(badblocks). It happens every single time with apt, I can't use it to install anything. But i've done plenty of other file operations without a bump.Any suggestions would be most welcome! Especially an in depth explanation of what that message means. I'm happy to do my own research and work, I just have no idea what's going on!
I have downloaded the Ubuntu 10.04 alternate PPC to install on my old emac.
It starts fine the installation process, and I want to have only Ubuntu on this machine so I erased all the mac partitions and create 3 new partitions
/ = root
swap
and /home
Everything goes well until I get the message that there is not a partition called Apple_bootstrap and I get stuck there.
I snagged the 10.10 alternate install ISO for PPC and got it up and running on a 1ghz G4 eMac with 1gb of RAM and a 60gb HDD. It runs... OK. It could be a lot better. I'm planning to shut off the bluetooth and CUPS services since neither apply to this system; are there any other services I can shut down, or any other tricks I could do to make it run a bit more smoothly?
What about alternate window managers? I realise that the PPC platform kinda limits me, but what about TWM or FVWM?
emac is new to me and I want to create a panel launcher ie. icon shortcut but there are 4 choices and I don't know the difference in function or usage between them: emacs, emacs-23.2-no-x11, emacs-23.2-with-x11, emacsclient.I want to learn how to use emacs so which one of these versions do i choose?
View 11 Replies View RelatedHow can I make Compiz work on this eMac? It's the original, 700 MHz, 1 GB RAM, Ubuntu 10.04. It was enough trying to get the xorg.conf file to show any video, but now I want to be able to use compiz so I can have a faster experience.
View 4 Replies View RelatedWith my ubuntu iso in the dvd drive, I do not get any boot from options for it to be used as boot drive within the boot order from the boot control panel. On startup with the alt key pressed I only get the Mac drive but when I change the boot to the other option (network) and press the alt key on startup, I get the boot order screen with the Mac HD and also the Ubuntu iso but cannot get the Ubuntu to highlight and use, just the Mac remains highlighted. On the same screen I get a very small wrist watch to the left of the screen that the mouse can move up and down but not to the side.
I am using a windows usb keyboard and usb mouse, I have used all manner of keyboard combinations to get the Ubuntu disc to highlight but nothing seems to work. Within the drive section, the "My Mac" drive is locked and cannot partition it or change anything about it. Has anyone any ideas that I can try? I did not want to get a Mac keyboard and Mouse as yet seeing as I wish to change the operating system to ubuntu.
I recently came into (temp) possession of two Original, white, 700 MHz eMacs. I have only started to play on one of these so far. Installed Ubuntu 10.04 PPC from Alternate Install CD - two times actually (because I thought I may have screwed something up the first time), but both times it seemed to go without a hitch.
After install and restart, I cannot drop into a shell, all I get is the black screen. I'm probably forgetting something really obvious, but I've tried Holding "Shift" and "F1" and control+alt+F1 (and F2, F3, F4, F5, F6), tried the esc key; with two different Apple USB keyboards. I'm really just wanting to load an xorg.conf file and reboot.
Should I have been trying to do this just after install, but before restarting? I can get into Open Firmware just fine, but have no idea what I'd do from OF except start off the CD again. I should mention I installed Debian just fine and am pretty confident MintPPC would work flawlessly, but I am trying to get Ubuntu 10.04 on here.
I installed the powerpc version of Debian Squeeze 6.0.1a on an eMac. According to the Wikipedia article, these systems had an nVidia geforce2 MX graphics card, and the system is using the Debian open nVidia drivers from install. I've gotten everything working on it, except the graphics are off. It's acting like either it can't handle the resolution or all the colors and looks a little like it wants to run in 256 colors. It's not unusable, just annoying. I know that it can handle a normal resolution because it was doing fine under Mac OS X puma before I wiped it and installed debian (I put debian on it because I needed a modern web browser, and the ones available under that version of Mac OS X weren't doing the job). I went to the nVidia website, but they only have the driver for x86 Linux. I need it for the G4 powerpc. Any ideas? I'm used to running Ubuntu on x86 machines, so the powerpc thing is throwing me a bit.
View 4 Replies View RelatedI am in a situation to boot fedora 15 live cd in to command line mode, not graphical mode, for some testing purpose. how to change argument during booting mode
View 4 Replies View RelatedI have tried eject /dev/cdrom, sudo eject, pressing the eject button but whenever i do , it just opens for like 1 second then closes right back. is this fixable within Xubuntu, or is this a physical problem with the cd drive?
View 4 Replies View RelatedI am using a linux kernel 2.6.36 using mips architecture. I have succesfully booted the machine through Flash memory, but it is not booting through nfs. It is getting stuck at the stage where the image starts loading. In short the vmlinux.img file is being copied properly to nfsroot but the image is not loading.
View 5 Replies View RelatedI've tried to compile it by myself, but since I do not know all libraries / compiler programs and assistant programs to be installed beforhand, great frustration has appeared ("g++ not available" etc. ...)Is anybody here who can publish a simple and perfectly understandable tutorial of how to compile Truecrypt for PowerPC architecture from source?
View 1 Replies View RelatedCurrently this PC has Ubuntu installed on it and it barely boots from HDD but crashes at logon, and just loops back to the boot device select screen when CD is selected.
I'm wondering if there is anyway to install a version of Debian on the G5 using my windows 7 tower PC and a spare SATA HDD?
Specs:
CPU : 2x PowerPC 970fx 2.0GHz (x64)
RAM : 2GB DDR
GPU : GeForce FX 5200 Ultra 64MB
I cant' compile apache for PowerPC.t says size of "void *" is less than sizeof of "long".
View 2 Replies View RelatedI'm trying to execute a C++ program on PowerPC. But I am facing an error saying: "error while loading shared libraries: libstdc++.so.6: cannot open shared object file: No such file or directory". But a C program gets executed successfully. The programs are cross compiled using PowerPC cross compiler.
View 1 Replies View Relatedhow I could file share, or make the whole Hard Drive (HDD) accessible to another computer. The two other computers I have are a Toshiba Laptop with Ethernet and USB, and a iMac Intel with Firewire, USB, and Ethernet. Putting these to use along with:
Three Ethernet Cables
Two Printer Peripheral USB Cables
The Two Computers
A 2GB Flash Drive
That is all I can think of right now. I do not want to use CDs. In a way, I would like to do a network boot. So, how do I get the whole HDD visible to the others computers (either/both) and be able to write to it? I want to put Xubuntu on it, and earse the rest of the Hard Drive. The computers getting this are the iMac G3s and the eMac G4. The eMac has 256MB RAM, 40GB HDD, and a 700MHz processor. Two iMacs have 128MB RAM, 40GB HDD, and a 600MHz Processor. The other iMac is the same as the rest but has a 500MHz processor.
I am new using linux and don't have too much experience in terminal, however I am curious and work hard. I have an imac G5 powerpc with 2g processor, 768 mb ram and 232.7g hard disk. I recentrly installed debian 8.0.0 (jessie) with xfce environement. I have three other computers (two with xununtu runing and one with windows) using dropbox to sync all my work in differents places, so I use dropbox to get all synchronized. I don't want to change all the pc's to other cloud service, I would like to install dropbox in this machine.
I installed libnet-dropbox-api-perl, pear-channels and pho-dropbox packages from the synptic package manager with the hope to use dropbox...but I dind't even find something colled dropbox in the pc.
My question is: is it possible to install and use dropbox in this powerpc machine ? if yes, is there a tuto (for dumps) to get it ?
Just wondering if there were any NES, SNES, etc emulators compatable with PowerPC Debian?
Not entirely sure if they will run well, but can't hurt to give it a try.
I need a cross compiler for C/C++.
Unfortunately, I can't find the GCC cross compiler in the repositories.
There is only a package with the binutils: cross-ppc-binutils
But nothing like: cross-ppc-gcc
I am using Ubuntu 9.10 on my iMac G4 powerpc.
Is it true that I cant use flash on this machine?
If so, is there an alternative to flash player?
I have a tray-loading iMac G3 that, after installing Ubuntu 9.10 (Karmic Koala) using the alternate installation cd, will go to a blank screen after booting. I know there is a way to fix it so that the horizontal and vertical refresh rates are correct to display what I need, but once it boots to a blank screen, and i go ctrl-alt-f1, it prompts me for a user name and password. I am 100% sure that I am typing in both correctly as i set them during the alternate install process, as I've done it twice so far, and caps wasn't on and I typed and retyped them to make sure they were correct. No matter what I try (even username: root, password: root, or username: admin, password: admin) it says login incorrect.
I saw that you can check the current user names and reset passwords by going into recovery mode, which I read you can get into by pressing shift or esc on boot, but on separate runs i tapped each key all the way from turn-on to the blank screen and no such option to go into recovery mode came up. Also, I try booting from the Live Installation CD, and when it boots to the blank screen, and i type ctrl-alt-f1, it gives me a neverending shower of Authentification failure's (as in they keep appearing down the screen, I can't type anything because it becomes interrupted by more Authentication errors). I'm at the end of my chain here. Any help would be appreciated. Either by getting me into recovery mode to fiddle with the passwords, getting it so that it takes the user name and password I set to it, or figuring out why the Live CD machine-guns me with Identification errors.
