After installing Debian Testing from the business card ISO via unetbootin, without a DE or WM, I log into root and get an error. The error is INIT: ID "co" respawning too fast: disabled for 5 minutes. I see the "co" line in /etc/inittab but I don't know what to do. How do I fix this error?
View 6 RepliesI am a ubuntu user but I want to go to the next level to use debian because what I heard of it, but I get confused to what to install on my computer do I install debian testing or debain stable with testing repositories.
- I want to use this system to the home use only.
- I want to use the newest packages because the stable packages is too old to use.
- What about using more than one repository i.e stable with testing with unstable at the same time (the same sourcelist)
- Is the testing and unstable sid packages good enough for the home use?
Could someone give me the steps to installing/enabling the newest Flash 10 in Debian Testing/Squeeze?I want to install via the steps one would do from Adobe's website.IT DOES NOT WORK.IT DIDN'T WORK FOR ME.I just want to install the routine way that is usually done in Linux but when I downloaded it, I was asked to extract it and I have no idea where it got extracted to.Can anyone help?I don't mind starting from scratch.I don't remember how to do this method.I'm used to the 'non-free' package in the repo but Flash 10 is no longer working so I want to use the 'sure' method.
View 5 Replies View RelatedI just installed Squeeze on an older PC. Installation seemed to go fine. But when it booted up on the installed system for the first time, I could not login - username/password failure. I tried every possible typing error and CAP LOCK error I could have made - still nothing.
I brought up a console window and tried logging in as root - same problem.
I booted into single user mode and entered passwd command to set new root password - I got a SYSTEM ERROR message from the passwd command.
I booted to a Live CD, went to /etc/shadow and deleted the encrypted password. Rebooted on the hard drive, went to console window and logged in as root, with no password required. So far so good. I entered passwd command to set new password and got the same SYSTEM ERROR message.
The machine seems fine when running on the Live CD, and the install seemed to go fine.
I'm trying to boot into the Live CD (64bit version) and it dies with an error "nouveau .... 0x8DF6 Init table command not found: 0xA9". Get the same error after I install and try to boot into Debian, it starts booting but errors out later.
Running Intel 4770K on Gigabyte Z97X-UD5H with 8G ram, Nvidia graphics card and several SSDs ...
I tend to stay on for long time. My machine is a Fujitsu T4310 tablet. I have got all tablet features previously working properly when I was on Isadora Mint. After installing LMDE to my surprise basic features of the tablet simply worked out of the box but I'm missing a few important features like multitouch, screen rotate and buttons in tablet mode.
As far as my experience with Isadora, it needed a driver called "fjbtndrv", but I couldn't find it in the repos, moreover, I think it might need some tweeks to get it behaving properly. I found some refferences but it refers to other ubuntu based distros, which I can't use of course.
p.s. prefere a solution other than compiling it myself, it looks scary and has lots of dependencies.
I have an harddisk which is old, since many years >10 years, and I recall I crashed few clusters using windows programs which were old and harddisk stuffs doing. So the pc lives with bad clusters, this pc lives very well since many years.Question, the pc has woody debian, which let us to install and exclude bad sectors during install. Bad clusters was an usual thing in the past, but today not anymore.Unfortunately debian squeeze installer coders had the good idea to remove the " bad cluster checking " before installing debian, during install (cdrom netinst).
View 1 Replies View RelatedI'm a Debian testing user (not an experienced one) on laptop Dell Latitude D531 and has encountered a problem: I've often got my laptop slowed down very much and the message appears in a console: Disabling IRQ #19 I've searched for the solution, but failed finding the answer.
dmesg showed:
Code:
[ 21.064461] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 21.067790] cfg80211: Calling CRDA for country: GB
[ 21.160654] padlock: VIA PadLock not detected.
[ 23.545837] fuse init (API version 7.13)
[ 24.354533] tun: Universal TUN/TAP device driver, 1.6
[Code]...
I'm running Debian Testing and since some time ago I'm getting the following messages:Any ideas how to solve this warnings?
(gtk-update-icon-cache:9204): GdkPixbuf-WARNING **: Cannot open pixbuf loader module file '/usr/lib/x86_64-linux-gnu/gdk-pixbuf-2.0/2.10.0/loaders.cache': No such file or directory
Processing triggers for gconf2 ...
[code]....
I just installed the Debian testing release(with LXDE) from this week. Everything works great except the network card. I know the network card works because Windows and the Parted Magic Live cd recognize it. Also "lspci" seems to list the card, but when I fire "ifconfig -a" it is not listed there.
View 12 Replies View RelatedI'm trying to boot Emdebian lenny on my compact flash and it shows the following errors during boot time :
Code:
Mounting local filesystems ... done .
/etc/rc.d/S35mountall.sh : line 45 : uname : command not found .
[code]...
The strangest thing happened. I installed Debian testing with the "squeeze Alpha1" netinstall cd. All seemed to go well and the installer made me pick a root password and create a normal user account. However, after the first boot my user account did not work and I could also not login as root, it looked liked I forgot the passwords for both accounts. When rebooted in recovery mode, I got Code: sulogin: root account is locked and I was automatically logged in as root without being asked for a password. Then I found out that the normal user account does not exist. I created a user acount and logged into it. I did passwd to set a password, but I got Code: passwd: Authentication token manipulation error Also, there was no home directory for the new user.
View 6 Replies View RelatedI have renamed two services by replacing S with K in rc2 and then tried to # update-rc.d script defaults and i get update-rc.d: using dependency based boot sequencingupdate-rc.d: error: unable to read /etc/init.d/script Obviously my command syntax is wrong. I have read the manpage but still do not understand what i have to type.
View 1 Replies View RelatedI'm suddenly getting GPG errors on Debian testing:
BADSIG AED4B06F473041FA Debian Archive Automatic Signing Key. I tried reinstalling the keyring but no change.
I am encountering the following error during installation of NIS on Debian 8
Code: Select alldpkg: error processing package nis (--configure):
subprocess installed post-installation script returned error exit status 1
Code: Select allroot@periferralvm1:~# apt-get install portmap nis
Reading package lists... Done
Building dependency tree
Reading state information... Done
Note, selecting 'rpcbind' instead of 'portmap'
rpcbind is already the newest version.
[Code] ...
Tried:
Purging and reinstalling
reinstalling dpkg
rebooted server
touch /etc/init.d/nis and reinstall nis
Ubuntu 9.10 will not boot! System froze this morning, I restarted and it is now failing to boot. Starts loading grub and I get this message:
mount: mounting /dev/disk/by-uuid/04aa3697-7bc0-45b5-b86a-77a1e6534bd5 on /root failed: invalid argument
mount: mounting /sys on /root/sys failed: no such file or directory
mount: mounting /dev on /root/sys failed: no such file or directory
[code]....
I booted with 9.04 LiveCD discovered the drive could not be mounted-ran fsck -ln and it told me the drive has no valid partition table. I have had intermittent problems mounting flash drives before this, so I'm kind of worried it might be a hardware issue.Also have files on that drive I would rather not lose, so reinstalling is hopefully a last resort.
I am trying to debug the installation. One of the sub-processes that does not install correctly is dsub-x11, which gives me following error:
E: Internal Error, No file name for dbus-x11:i386
When I try to install new packages I get following errors
Code: Select allE: cups: subprocess installed post-installation script returned error exit status 1
E: ntp: subprocess installed post-installation script returned error exit status 1
E: rsyslog: subprocess installed post-installation script returned error exit status 1
E: at: subprocess installed post-installation script returned error exit status 1
E: exim4-base: subprocess installed post-installation script returned error exit status 1
[Code] ....
Here is some detail
Code: Select allSetting up cups (1.5.3-5+deb7u6) ...
insserv: warning: script 'S99pcloudd_init' missing LSB tags and overrides
insserv: warning: script 'pcloudd_init' missing LSB tags and overrides
insserv: script pcloudd_init: service pcloudd_init already provided!
insserv: warning: script 'pcloudd_init_start' missing LSB tags and overrides
insserv: There is a loop at service minissdpd if started
[Code] .....
I tried to install Debian-Squeeze 64-bit from CD [URL] as I thought mistakenly my cpu has 64 bit support. Ofcurse proccess stoped as the kernel wasn't compatible, but only when I removed the 'quiet' parameter I could see the error, when the 'quiet' parameter was passed, process gave no visible error,just stop in the start screen of debian-installer.
View 1 Replies View RelatedI've been trying to install a few programs with the basic Debian repositories on my Jessie edition, but I keep getting a "broken packages" error and "cannot be installed" error, and the programs won't install.
I went to other repositories, e.g. Mint and Ubuntu, and with these included in my sources.list file, I was able to install the desired programs.
If the programs are listed in Debian and the dependecies as well, why would they not install?
I downloaded skype 2.2 .deb package on the skype website and tried to install it via sudo dpkg -i skype-debian_2.2.0.25-1_i386.deb and got the following errors:
[code]...
What does the error mean? I am guessing I have a faulty package. old skype can't be used due to segmentation fault error, so I am really hoping for the new upgrade to solve my skype problem.
What is this Dependency Problem. I got the following Error while installing yahoo messanger. What could be the solution or the alternatives for this.
[code]...
I am installing Wheeze using netinstall.
After the partition step, the installation gives me the following error: Debootsrap Error.
Invalid Release file: no entry for main/binary-amd64/Packages
I have tried several iso's with several cd's but nothing is working.
I tried to install skype: apt-get install skype but I got the following error: Failed to fetch cdrom:[Debian GNU/Linux 6.0.1a _Squeeze_ - Official i386 DVD Binary-1 20110322-15:11]/pool/main/q/qt4-x11/libqtgui4_4.6.3-4_i386.deb Hash Sum mismatch
View 2 Replies View RelatedI've heard a lot of talk about people running 'Testing' as a rolling release version of Debian. As I have a spare box to play with, I wanted to see what this was like. I've done a minimal install of Squeeze and had a look at /etc/apt/sources.list. As I would expect, the file refers to Squeeze and not 'testing' (I think Woody used to go for stable/ testing etc, but this then got changed). In order to run 'Testing', can I just replace the Squeeze references and do:
View 6 Replies View RelatedI revived my old desktop (failed psu), and installed debian squeeze using netinst. It has a nvidia geForce 7600GT card. The driver in squeeze does not work very well, so I downloaded nvidia driver-installer. When I run it, it comes back with an error saying the kernel (I assume the nvidia graphics kernel) is compiled with gcc4.3, but the system is using gcc4.4. Using synaptic manager, I installed gcc3.3, but same error.
Next I tried to uninstall gcc4.4 and it gave a warning the system might not be usable. I did not understand it, but I went ahead and uninstalled gcc4.4 and guess what, the system is not usable, and I have to re-install squeeze. Not a big loss, since I do not have much in it. How to install this nvidia driver, specifically, how do I get switch to gcc4.3 from gcc4.3? Also, the squeeze install gave me 2.6.33-trunk-amd64, and 2.6.33-3-amd64. How do I get rid of ...trunk-amd64? Do I just delete it from grub?
Is there any way other than building the source for 1.1.42 and manually installing it to actually get the latest version on my Debian Testing? How long does it normally take for new versions of Wine to get into the repo's?
View 2 Replies View RelatedIs there any program for GNU to calculate CPU's performace in marks (should support multi-core CPUs)? So it will be possible to compare performance of different CPUs.
View 4 Replies View RelatedI installed debian testing (wheezy) in virtualbox as I plan on installing it on a laptop. I thought it would come with gnome 3 but that appear to not be the case. [url] Is unstable running gnome 3? Is there a way to run gnome 3 with testing or would that be a bad way to go about it?
View 2 Replies View RelatedI'm new to Debian, but because I'm used to Ubuntu and Mint, I searched in Gnome menu for a link to Synaptic, and there isn't one, so I opened synaptic from Terminal, using "synapric" command as root. I don't know if this is the proper way to open Synaptic, but when I try to install VLC, Synaptic returns the following message in a pop-up dialog box:
Please insert the disk labeled:
Debian GNU/Linux testing _Wheezy_ - Official Snapshot
i386 CD Binary-1 20110711-03:22
in drive /media/cdrom/