Debian Installation :: Installing Debian On IBook G4 / PowerPC
Jul 17, 2010
I have downloaded Debian/PowerPC_lenny from http://www.debian.org/distrib/netinst. The netinst CD or the minimal CD for some reason doesn't boot. When I put it in the CD-ROM it doesn't begin whatever it has to do. Do I need to do anything? I restart my iBook G4 (1.33 GHz PowerPC G4) several times and held the "c" button (for CD-ROM) but nothing has happened. I wonder if someone can help me begin the installation process.
FYI, I have partitioned my hard drive into two volumes. I would like to install Debian in one of them. I *do not* want my Mac OS X to get disappeared in the Debian installation process. So please help me if you would as to how I can (1) boot Debian minimal CD and (2) install Debian on one of the two volumes I have on my iBook.
View 4 Replies
ADVERTISEMENT
Jan 28, 2011
I've been trying to set up MintPPC on my girlfriend's old iBook. I started with the debian squeeze installation from a burned cd. Everything went fine and i booted into the new system.
No matter what I try to install I get that error, with different sectors each time. I can install .debs using dpkg just fine, I can compile source code. apt-get just won't work.I've been reading about this for hours, and the machine is currently running e2fsck -c on the main filesystem. It is a more or less never ending stream of those errors with a few that reference task_pio_intr rather than dma_intr thrown in for good measure.I've been reading for hours but I haven't found anything on the google or forums that matches my problem(or atleast not that I could understand).
From my research I've tried hdparm to change the DMA mode, slower and faster and no luck, removing the .bins in one of the apt folders, and reinstalling debian.I've read the posts I could find on here, and mostly the problem seemed to be intermittent for them. For me it is only when I use apt-get, and now apparently e2fsck(badblocks). It happens every single time with apt, I can't use it to install anything. But i've done plenty of other file operations without a bump.Any suggestions would be most welcome! Especially an in depth explanation of what that message means. I'm happy to do my own research and work, I just have no idea what's going on!
View 4 Replies
View Related
Aug 3, 2010
I have a live cd of debian for powerpc and I am trying to install it on my old eMac that runs Mac OSX version 10.4. So how do I boot from the cd with or without using open firmware?
View 9 Replies
View Related
May 3, 2010
I'm trying to install Debian/Lenny on a iBook clamshell. I couldn't seem to burn an install CD that the iBook would recognize, so I eventually copied the contents of the CD onto a self-powered USB drive and I can now get the iBook to boot off of that thru open firmware. However, when I get to the Debian installer main menu, it still won't read the CD, and apparently it does not have network drivers to install over Ethernet. Is there any way I can supply a driver for the ethernet interface (lspci reports that its a sun GEM ethernet interface) or somehow convince the installer to install from the content of the USB drive (which is a duplicate of what's on the installer CD)? Heck, if it'd be easier to get the Airport interface running to reach the Internet I'd be up for that too.
View 1 Replies
View Related
Oct 17, 2015
Currently this PC has Ubuntu installed on it and it barely boots from HDD but crashes at logon, and just loops back to the boot device select screen when CD is selected.
I'm wondering if there is anyway to install a version of Debian on the G5 using my windows 7 tower PC and a spare SATA HDD?
Specs:
CPU : 2x PowerPC 970fx 2.0GHz (x64)
RAM : 2GB DDR
GPU : GeForce FX 5200 Ultra 64MB
View 2 Replies
View Related
Aug 28, 2010
I am trying to install the PPC kernel on an iBook G3. The CDs boot up, however both the net-install and the regular install cd both freeze up after it looks for harddisks. The screen is blue. The box title says
"Loading additional components"
"0%"
"Retrieving lvm2-udeb"
I have no clue what to do. I am trying to get an error readout, but nothing but the power button works. It shuts it off. I check the system clock and it was wrong, but I got it set to the correct time. I don't have and OSX disks. I am wanting a full Linux HD. Please let me know how to trouble shoot. (I have seen that many people have no problem installing this on there macs. The os is still working on the os side, but I want to switch it to Linux.)
View 9 Replies
View Related
Jul 17, 2011
since a whole week now i am trying to set up a Debian System on an old Ibook G4, with 1.2 GHz and 768 MB RAM. My Install Media is the Wheezy 8-CD-Set. I am not going to have anything besides Debian on the Notebook.
The Install process works fine until the Installation of the Core System. At the end of this process a window pops up and tells me that the CD with the title Wheezy-CD-1 or something like that is inserted and asks me to insert another CD or DVD now. Up to this point everything seems fine to me, but when i hit the "OK" Button the CD won“t come out of the Notebook, and besides that the Installer freezes. A progress bar, entitled with "executing cdset", is shown at a progress of 25% and does not move, also nothing happens when i try to cancel the process.
Whats the problem with my Installation? I already downloaded a second copy of the first Image and burned it again in case something was wrong with Installation Media, but the problem is still the same.
View 5 Replies
View Related
Feb 8, 2016
Looking for the binutils for powerpc in squeeze.
Found a reference here: [URL] ....
But the file [URL] ... is missing, has this been removed or what?
View 6 Replies
View Related
Apr 21, 2010
I was going to try out Squeeze on my ibook so I downloaded one of the weekly snapshots of the netinstall image and booted the installer. The installer was unable to recognize the ethernet card of my ibook which I found odd since I have used Lenny in the past without having any problems. Does anyone know if this is a bug in the installer or has firmware for my ethernet card been dropped from Squeeze? I searched around and couldn't find any bugs that were specific to PPC with this installer. It is not a deal breaker as I can just install Lenny and then dist upgrade to Squeeze,
View 4 Replies
View Related
Jul 21, 2011
I am thinking to turn a pretty old Mac Mini with 1.42Ghz PowerPC to Debian. Any thing I should be aware of?
View 1 Replies
View Related
May 16, 2011
Debian Squeeze freezes with blurred image and no access to other terminals after installation or internet upgrade from Lenny. Lenny works fine.So how could Debian Squeeze be installed or be upgraded from Lenny on PPC without this problem?
View 2 Replies
View Related
Feb 8, 2011
I've tried to compile it by myself, but since I do not know all libraries / compiler programs and assistant programs to be installed beforhand, great frustration has appeared ("g++ not available" etc. ...)Is anybody here who can publish a simple and perfectly understandable tutorial of how to compile Truecrypt for PowerPC architecture from source?
View 1 Replies
View Related
May 31, 2015
I am new using linux and don't have too much experience in terminal, however I am curious and work hard. I have an imac G5 powerpc with 2g processor, 768 mb ram and 232.7g hard disk. I recentrly installed debian 8.0.0 (jessie) with xfce environement. I have three other computers (two with xununtu runing and one with windows) using dropbox to sync all my work in differents places, so I use dropbox to get all synchronized. I don't want to change all the pc's to other cloud service, I would like to install dropbox in this machine.
I installed libnet-dropbox-api-perl, pear-channels and pho-dropbox packages from the synptic package manager with the hope to use dropbox...but I dind't even find something colled dropbox in the pc.
My question is: is it possible to install and use dropbox in this powerpc machine ? if yes, is there a tuto (for dumps) to get it ?
View 6 Replies
View Related
Nov 8, 2010
Just wondering if there were any NES, SNES, etc emulators compatable with PowerPC Debian?
Not entirely sure if they will run well, but can't hurt to give it a try.
View 9 Replies
View Related
Jul 18, 2011
I“ve set up a Squeeze System on an old Ibook G4 and, besides wlan, everything works fine.i guess i need some firmware, i have tried several things and couldnt resolve the problem. I am unsure which firmware i actually need, or of something else has to be done.i“ll post the outputs of ifconfig, iwconfig and lspci and hope someone who could guess the problem or find the solution with it.
root@debian:/home/robert# ifconfig
eth0 Link encap:Ethernet Hardware Adresse 00:11:24:32:20:54
UP BROADCAST RUNNING MULTICAST MTU:1500 Metrik:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
[code]....
View 1 Replies
View Related
Sep 19, 2010
I installed debian 5.06 on my Mac ibook g3, I had the same problem, the interface is only on a portion of the screen (about 70% x 70%) of the size of the screen.The screen is configured for 800x600, there is no another resolution, so I suppose I need another driver.here is the lspci output ; vga compatible controller : ATI technologies Inc Rage Mobility M3 AGP 2x (rev 02). secondly, If i couldn't install linux on this mac, can I retrive or reinstall ? the mac OS ?
View 1 Replies
View Related
Sep 18, 2010
I want to install Debian 5.06 64 bit on squeeze repo. Where can I find its netinstall ISO?
View 6 Replies
View Related
Oct 19, 2010
i am trying to get starting installing debian on my virtual server what is supported for IA64 and i have try'd this few different version(se bellow) and the img fail isin't boting?
debian-503-ia64-businesscard(notice diffrent version tryed to)
debian-503-ia64-CD-1(notice diffrent version tryed to)
debian-503-ia64-netinst(notice diffrent version tryed to)
I have used before virutal server and booted successfully a img file and installed a operating system sow what is wrong?
View 7 Replies
View Related
Dec 28, 2010
I have just installed Squeeze on my 5+ year old iBook G4 and it runs quite nicely and quite fast! I am very happy with it overall. Finally I have been able toinstall Debian on a piece of hardware. Dual boot is generally hopeless on Macs. So this is a single boot setup and I am quite happy with it. I have two major issues right now:1. There's something wrong with the sound system. I get the following error message when I clickon the small x to the right of Volume Control (on the upper right corner of my screen). See attached screen shot.
View 3 Replies
View Related
Jan 17, 2015
I am wanting to get be able to upload and get stuff from dropbox on my powerpc install of wheezy. Debian does not have the app for powerpc machine in stable or testing. There is a thunar extension in sid but i do not want to risk breaking my system so I decided to grab the wheezy source and compile myself. I am sure I have all the dependencies however I am I am getting this error. See below
rican-linux@debian-ppc:~/Build/source/nautilus-dropbox-1.4.0$ debuild -us -uc
dpkg-buildpackage -rfakeroot -D -us -uc
dpkg-buildpackage: source package nautilus-dropbox
dpkg-buildpackage: source version 1.4.0-3
dpkg-buildpackage: source changed by Raphaƫl Hertzog <hertzog@debian.org>
[Code] .....
View 7 Replies
View Related
Jun 26, 2011
I have installed Debian Lenny with LXDE on a Dual USB 500Mhz iBook g3 the login screen appears displaying the screen using "800x600" pixels with the screen resolution at "1024x768" - so the login screen fills 2/3 of the LCD with black space to the right and the image repeating itself in the bottom 1/3 of the screen The "System Tools" > "Monitors Settings" only list one setting size of "800x600" and "Auto" After trying to search for answers I have tried editing the /etc/X11/xorg.conf file (after stopping gdm and rebooting afterwards)
# ... after these lines
Section "Screen"
Identifier "Default Screen"
[code]...
But nothing changes.
I have also tried [ dpkg-reconfigure xserver-xorg ] but there is no prompt for resolution
View 5 Replies
View Related
May 27, 2011
I have a 2003 iBook G3 White Dual USB laptop running Squeeze. I have a weird question. I found that get the WEP or WPA to work with the card, I basically delete the firmware "agere_sta_fw.bin". As the computer boots, it complains that it can't find the firmware, because it obviously isn't there anymore. However, the wireless card works just fine once it boots up. I can connect to my WEP wifi immediately, which is impossible if it uses the firmware. However, when the computer sleeps (which it likes to do all the time when it isn't plugged in) it hangs on wake trying to find the firmware. After awhile, it gives up and comes back up. The network controllers (LAN and Wireless) are completely missing and cannot be re-activated unless the computer is rebooted.
Now my question is this. What is driving my Orinoco Airport card and Network port when it can't find the correct firmware. Is there a command or program that will tell me what driver it is using to run it. Then, do you suppose that I could map the firmware file to that driver so the computer can wake with out problems?
[code]...
View 2 Replies
View Related
Feb 18, 2010
is there a possibility to install nspluginwrapper (to use for flash-plugin from adobe) on Lenny on a PowerPc (IBook G4)?
View 2 Replies
View Related
Jul 20, 2010
I was trying to get a SMART board to work with my install of Lenny on my iBook G4. By work with, I just need it to display what's on the iBook's screen, I don't need any kind of interactivity. Since it is an iBook, it uses a PowerPC processor, instead of an Intel, and the SMART board driver only works on an x86 processor, I can't use the driver provided. Is there any way to get this to work? I imagine that I need to edit the X.org configuration file!
View 1 Replies
View Related
Mar 22, 2015
I am having sound issues with iBook G4 running Debain Jessie. I am dual booting Ubuntu_MATE 15.04 and Jessie on the same HD. For PowerpC iBooks and PowerBooks you need to manully load the snd-aoa-i2sbus module in order to open alsamisxer so you can set you PCM Channel. I have done this when I ran Jessie on my PowerBook and sound worked with no issues. Now on this iBook I have ran both Lubuntu and Ubuntu-MATE with sound working by using this method. However when I installed Jessie I loaded the module, got aslmixer to load and set my PCM Channel but no sound.
View 1 Replies
View Related
Jun 19, 2011
The machine I'm using has a PowerPC architecture so I'm somewhat limited to what flavors of Linux I can use and I don't want to go back to Mac OS 8.9. The HD is only 3.3 GB so I can't get both Debian and GNOME on it.
View 1 Replies
View Related
Mar 7, 2010
I have an white iBook (G3 900mz model) and it doesn't autodetect the sound card. Running lspci | grep audio doesn't produce anything but running alsaconf does detect the PowerMac sound card which works if you follow all the prompts. Unfortunatly this doesn't make anything permanent and I was looking for advice as to how to set this up so that the sound configuration is actually there across boots.
One of the screens of alsaconf after selecting PowerMac and watching it say configuring snd-powermac it asks; Would you like to modify /etc/modprobe.d/sound? (and /etc/modprobe.conf)
Which I say yes to and then it gives me the happy message about having fun with your working sound card. I then log out and back in and the sound works great.
I've tried using alsactl store but that doesn't seem to work because at every boot there is a message that scrolls past saying "alsactl restore" failed with a state of 1573: No Sound Cards found.
View 1 Replies
View Related
Jul 8, 2011
I'm attempting to install debian on my old ibook g3. Upon normal boot I get a black screen with a bar (attached image) I boot the kernel with init 1 and I see that I have no xorg.conf, so naturally I input xorg -configure. Attached is the log, as I am under Windows and read it. Let me know what you think and let me know if you need any output from me[URL].. p.s As I'm a new member I can't attach anything yet so I uploaded it to media fire. ibook.zip (includes xorg.log & IMG_20110707_203900.jpg /984.41 KB)
View 14 Replies
View Related
Jan 2, 2011
I have an ibook g3 that I'm trying to resurrect with Ubuntu 10.04. However, booting into live CD always freezes it at some point in the installation process. I got it installed but everything takes five minutes to open. any way to make it faster?
View 4 Replies
View Related
Mar 21, 2011
I was wondering. Up till now whenever I installed Linux I've either dual booted with Windows off 1 HDD, or installed straight Linux by itself. However, I recently purchased a second HDD for my computer, and was wondering how I could go about installing Debian on the second drive without messing with the windows drive? Right now I have Windows 7 installed on my 1TB drive, and would like to try and install Debian on my second (750GB) drive. Would it be possible to install Debian on the second drive, install grub on that drive's MBR so I could choose between Debian and Win7 without touching the MBR on the 1TB Windows drive?
I'm paranoid about messing up my Seven installation, but really want to be able to load into Debian as well.
View 5 Replies
View Related
