Ubuntu :: Loading Vista From Grub Loader - Black Screen With A Flashing Underscore Character
Jun 29, 2010
I installed Vista on my Acer 64-bit laptop first, then installed Ubuntu 9.10 in a dual-boot configuration. And when I start up my computer, Windows Vista is an option in the Grub menu. But when I use the grub loader to load Vista all I see is a black screen, with a flashing underscore character (it looks a lot like a terminal screen, waiting for input). The screen just stays like this, too - I timed it once, and 13 minutes later it was the same.
so I installed fedora 12 last night, everything was fine. Installed some things, moved music over, etc. (Dual booting with windows vista btw) So I install my graphics card driver, (ATI Radeon HD 3200) and I reboot. When I open the bootloader (I think thats what it is), It starts to boot, then just has a black screen with the flashing underscore. I can type and stuff but nothing happens.
I deleted both the partition with archlinux and the swap in order expand the windows xp partition. I am now unable to boot, just as gparted warned me. When I turn my computer on, it just goes to a black screen with a flashing underscore.
I cannot type anything, but cntrl-alt-dlt does restart. I have been attempting to restore grub and/or windows's boot method for the last 24hrs. The main things I've tried were the instructions here and using super grub disk. However, I have not been successful. I am running an Ubuntu live disk. At the moment, I just want to be able to run windows, but do not have an xp disk because this laptop was issued from my old college.
I've just installed ubuntu 9.10 from a live cd on to a 2nd HDD, with vista on the 1st. When I turn my PC on GRUB comes up and I can select ubuntu or vista, vista works but when I try to boot ubuntu the screen goes black with a small flashing underscore in the top left and then just goes completely black, nothing else happens after this. I've tried reinstalling from the live cd but when I go install nothing happens and the screen goes black again. When I was installing I changed the boot to something like scsi?
My PC's specs are: Dell inspiron 531 HDD1: Ubuntu(300GB) HDD2: Vista(1TB) OS Windows vista Graphics card. ATI radeon HD 4700 series
I had switched over from Windows to Ubuntu and got rid of windows completely but still had the recovery partition and deleted it. I then tried to add that space to another partition, "Media." For whatever reason it deleted the "Media" partition so I used TestDisk to restore it. I did something wrong and when I rebooted my computer it would not boot so I used my LiveCD to check whats wrong and it had deleted all of my partitions and Ubuntu was nowhere to be found.
So I used TestDisk again to recover them, this time it was successful. The problem now however is that when I start my computer it does not boot into Ubuntu it just shows a black screen with the white underscore ("_") flashing in the corner. I'm not sure but I don't think it is booting into the correct partition, I think it would be trying to boot the first partition, /dev/sda1, rather than /dev/sda3. If this is the problem how could I fix it?
I had switched over from Windows to Ubuntu and got rid of windows completely but still had the recovery partition and deleted it. I then tried to add that space to another partition, "Media." For whatever reason it deleted the "Media" partition so I used TestDisk to restore it. I did something wrong and when I rebooted my computer it would not boot so I used my LiveCD to check whats wrong and it had deleted all of my partitions and Ubuntu was nowhere to be found. So I used TestDisk again to recover them, this time it was successful. when I start my computer it does not boot into Ubuntu it just shows a black screen with the white underscore ("_") flashing in the corner. I'm not sure but I don't think it is booting into the correct partition, I think it would be trying to boot the first partition, /dev/sda1, rather than /dev/sda3. If this is the problem how could I fix it? I got all the boot loader information, here it is:
I recently removed Winblows Vista from my laptop and replaced it with Kubuntu 10.10 (I left the recovery partition on there, just in case). When I turn on the computer, the GRUB menu appears, I press enter, then a little flashing underscore appears on the screen in the top left hand corner. After a few seconds, the Kubuntu logo appears and I can log in.But yesterday I replace Kubuntu with Ubuntu 10.10. The Boot process is the same, but the little flashing underscore in the top left hand corner flashes for about 10 seconds longer then Kubuntu 10.10 did, and then a few paragraphs of text appears for a few seconds, then I am logged in automatically.Is this "unusual" boot process anything to worry about, or am I just being a noob.
another post about this. I just don't know how to handle this, as I'm pretty nsee the grub loading menu, but screen just freezes after, no way I can reboot, or open a console. In recovery mode I can log as root in console, though.I run Debian 6, 64 bits. I have an intel q6600 and a nvidia geforce 9800GX2.
I just installed Ubuntu 10.04.1 (desktop edition) on my netbook (NB200), the installation worked fine, but when i restart i get a black screen with a blinking underscore on the top left corner. I don't have any options as any key that i press is just printed on the screen. (This happened with every version that I tried so far, even the netbook remixes).
If I don't press anything for some minutes, Ubuntu is finally starting, but without showing the Ubuntu loading screen in the process, like it did when I tried it with the USB.
I have a Windows XP Dell laptop that completely froze the other day. I cannot start it up, and cannot even access safe mode -- it just goes to black screen with underscore in the upper left corner.
So, I did some searching and saw a recommendation to create a Ubuntu Live CD to run and access the info on the hard drive, at least. I have most of it backed up, but not the drivers and I know that will be a pain to redo. So, I am mostly hoping at this point to recover a little info off the drive before reinstalling the OS. Of course, if I could just fix it, that would be better...
I get an error message when I try to access the hard drive through Ubuntu that says it is in hibernation mode and I need to start windows and shut it down properly before Ubuntu can mount the drive. Since I can't get into Windows, this is impossible. It also said something about being able to mount it read-only.
I installed 10.10 of the live boot CD. It said everything went fine, now when I go to boot into Linux it just flashes the underscore on a black screen. What do I do from here?
After succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e, 4 gig of corsair dual ram, ati 4850 graphics, onboard audio. ahci mode win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2, i had this configuration running fine for 2 months without boot loaders, on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
I Dual-Booted (if im not mistaken is the term for installing two OS) Ubuntu 9.10 and Windows Vista. Using Ubuntu 9.10 as my primary OS and using Vista for some programming ( college stuffs ) Only a moment ago, i reformat/recovered my Vista and only i found out that, my GRUB loader has gone. I'm asking is there any way for me to install a GRUB loader using Vista?
Once I installed it I've been having a problem where the screen flashes black for a split second. i looked up the problem and found this:I navigated to the directory it said, but I don't have an "options" file. What should I do? Are there any other fixes for this? It's quite an irritating problem.
I ran into a problem the moment i installed 11.1. The GUI wouldn't show up (ctrl+alt+f2 yeilded a black screen with a blinking underscore). Failsafe worked fine, though.
So, i tried entering, one by one, every parameter that was entered in the failsafe boot options. Entering 'x11failsafe' gave me a flawless GUI. So, i opened the '/boot/grub/menu.lst' file and added this parameter in the 'showopts' of the normal mode, to make it permanent. Fine. Now, what exactly have i done?
Note- I use an NVidia 8000 series Graphic card. I'll post more details if you need them.
I have a laptop which was originally running Windows Vista, I attempted to install Windows XP on via USB since the laptop couldn't boot the install disk (this has turned out to be a bad disk drive. This fell flat on its back and wouldn't even finish the install (although not before formating the Vista install in to oblivion). Although I was extremely careful to leave the Vista recovery intact. So I managed to get Ubuntu 8.10 (XFCE if that makes any difference) installed over USB. I was wondering, Could I use the GRUB louder to boot into the recovery drive? Laptop is a Toshiba Equium L350D
I have just wiped my whole hard drive to install a fresh copy of Ubuntu on it, and now as soon as i power it up it passes the POST screen and black screen shows up with a flashing cursor. I bliv it should say no operating system and pick the USB which has Ubuntu installation on it.I have formated the hard drive to NTFS, the system is Samsung NC10.
When I try and install Ubuntu 9.10 it gets to the flashing Ubuntu logo, then the screen just goes black. It then says: (initramfs) Unable to find a medium containing a live file system. I also tried the disk on a another computer and it worked fine, and I've installed Ubuntu 7.10 on this computer before without a problem.
on a cold computer randomly appears black screen with white flashing stripes up to half of the screen preceded by a message "checking battery state... [OK]". - ubuntu 10.04 LTS
- desktop compaq evo d510 sff
- intel 82845G/GL[Brookdale-G]/GE chipset integrated graphic device keyboard is not active on that black screen, BIOS settings look OK
I installed Ubuntu 32-bit v. 10.10 on a Dell Optiplex GX270, after installation i had to reboot, but then when rebooting it just goes to a black screen with a flashing
I'm using debian for the first time and I recently downloaded the Debian Lenny 201 Live CD to test it on my old computer (I'm planning to use Debian 5.0.4). It has a Pentium III (550 MHz) processor, 192 MB RAM, 8 MB graphics memory, 20 GB HDD with a monitor supporting 1024x768 resolution. The problem is, after the booting is complete a blank flashing screen appears with a cross-shaped cursor in the middle. I continues and nothing happens. I tried with solutions like editing the entries with 'live xdriver=fbdev', 'live xdriver=none', and 'live vga=771'.
I have 3 hard drives and have Ubuntu installed on one (sdb), had windows vista installed in the other (sda) and use the other (sdc) as a back up/extra space. I just deleted the windows vista partition and formatted the hard drive (ext4) and now just use Ubuntu, however, in the grub boot, vista and recovery is still showing up. How can I clean the grub up and delete these entries. I've searched all over the place, googled like crazy and all I can find is how to get rid of grub or reinstall the MBR of vista (etc). One more thing, how can I permanently mount the new empty hard drive in Ubuntu so that I have access to it all the time w/out having to mount it.
I can't get Ubuntu 9.10 to install... I downloaded ISO image from official web, Then I burn it on blank CD-R using lowest speed available from Nero 6, After that I go to BIOS and change that CD-ROM will boot first; Done. After that i reboot with CD-R, and it boots! Yea!, I press "Install Ubuntu", it goes to black screen with flashing Ubuntu logo at middle of it, After 1-2 minutes i turns black, ouch!, I press "Enter", and there is a error message, something like this...
I have just recently installed Linux Lime along with windows 7 Home Premium. Before, there would be a menu asking me which operating system I would like to use. When I click linux it goes to linux and windows 7 goes to windows 7. Now when I click Linux, the black screen you get at the beginning shows a - (dash) constantly flashing on a black screen and won't boot to linux. This is normal as it does that for a second then boots. Now its stuck on that flashing dash on a black screen and won't boot.
As the topic says. I'm having problem after problem, everytime I figure out a way to take a step forward, my PC has pre-emptively taken a step back.
I'm unable to boot to X or (recovery mode).
I did try booting to a LiveUSB in order to run update-grub, but then it occured I have no idea how to do this from a LiveUSB that will affect the internal HDD installation?
So I'm currently trying to reboot from Live USB, but that just seems to have locked up the PC on the white ubuntu logo. I'm afraid to hard reset it (been doing too much of that lately). How long should a Live USB take to shutdown? (been about 10 minutes so far ). It's not a persistent LiveUSB as far as I know, and I basically just booted to the desktop and then start the reboot cycle as soon as I realised I didn't know what I wanted to do .
After installing Ubuntu Server 10.04 LTS, I restarted my machine. I removed the disk, but now when it starts, it never gets to GRUB. Instead, it just takes me to a black screen with a blinking cursor. I can't type in anything and holding shift doesn't take me to GRUB.
My computer keeps having some kind of meltdown. i really cant explain it other than the screen will go black, and then it will start flashing like white bars, or different colored bars. this happens at such random times i cant exactly pinpoint what sets it off.
the only thing i may have a clue to is that in my update manager, there is one thing that is a distribution update that i cant check to have it installed or anything like that. its then "Gij" and its description is it is "the gnu java bytecode interpreter" i just dont know if i should just go back to an earlier form of ubuntu because these problems didnt start happening until i upgraded to the new ubuntu
I have installed F12 on the remaining space on my disk and now Windows does not boot anymore. I get to Grub and choose windows and then just get black screen with flashing cursor.
I have an old machine running Ubuntu 9.10 and XP.t is a P4 and Nvidia FX5200 card.Yesterday all of a sudden the screen started flashing black, the same type as when you install new graphics drivers and the resolution is changing. Only here it keeps happening over and over, the mouse isn't usable fully, the icons and menus are distorted, and I basically can't do anything.
I ended up reinstalling 9.10 and everything was working fine until I installed EnvyNG to get my nVidia drivers. It required a restart, and once I logged in the same thing started happening. So I said screw this, and installed 8.04. Yet even in 8.04, once I used EnvyNG to install the drivers, the same thing happened.A few other detailsP works fine, although one time a similar thing happened on XP (not as bad), and was fixed with a reboot.- This PC runs through a KVM switch, but I connected it directly and the same thing happens.I've found no help via Google. Sounds like a possible hardware problem, but it seems to work fine in XP and only acts up in Ubuntu once I install drivers.
