Fedora :: Can't Dual Booting With Grub (legacy) - Black Screen Grub Error 27
Jul 31, 2011
is it ever possible to do dual booting with grub(legacy) ever at all!. it is possible provided i take some pain, here is the link of that post [URL] i was coward and weak i didn't try that out then. but i did try it out. now so if u haven't seen the post .... I've installed Fedora 15 desktop(Gnome) with physical Logical volume called vg_fedora lv_root(ext4) ,lv_swap and lv_home(ext4), with 500MB /boot partition and had about 200GB free hard disk space ... so i wanted to install Scientific Linux 6.1 (because our school uses RHEL 6.1)
so, while running the installer I made (added) a logical volume lv_Scientific with ext4 FS and made its mount point (/) and used the MBR /boot which overwrote the Fedora /boot (completely OK and was as expected) i restarted after installation i got SL log in and as per the directions of the thread i copied the boot stanza from grub.conf of fedora 15 (which i already had copied and pasted into a text file and copied it from there)and pasted it into grub.conf of SL you may ask why did i choose same physical LVM too save swap space ... if i had made another physical LVM i had to make another swap ( i like LVM ... its cool)
completely unexpected happened Fedora now boots but not SL when grub starts i get this error 27 unrecognised commad and when i press <enter> i get grub menu with SL and fedora when i press on Fedora it works well i get my fedora login and i did login .. everything works fine but when i press SL it goes to the previous black screen grub error 27
[Code]...
View 14 Replies
ADVERTISEMENT
Jul 22, 2011
I am having trouble getting FEdora 15 running on my MacBook Pro. I had Fedora 15 installed before on this MBP before, so I know it works. I basically followed the good old instructions of
1. Create a Windows partition in bootcamp (rEFIt was already installed from trying to get ubuntu running)
2. Boot from disk and install in Windows partition with bootloader on installed on the / partition
3. Install, reboot, and resync the MBR using rEFIt partitioning tool
4. Shut down the computer and start up on the parition you installed linux on
Now I get a grub error code...
View 2 Replies
View Related
May 17, 2011
It's a little silly to ask this, as I am about to try it anyway, but is it theoretically possible to use a GRUB Legacy USB boot cd to boot a distro beyond 9.04? Or do I need to get to reading about GRUB 2?EDIT: As the USB Boot CD needs to be created from the GRUB files existing inside the Distro that it is intended to boot, this is impossible. Question answered.DIT EDIT: Unless I revert to GRUB legacy inside the Distro itself. Ok. Neat. I guess I just needed a place to write it down to figure it out
View 3 Replies
View Related
Jun 2, 2011
I had Fedora 14 (x86) and Windows XP with Grub Legacy (Grub) for dual boot in my desktop.
I installed Debian and Grub 2 replaced Grub in the MBR.
Must I reinstall F14 to recover Grub as bootloader or is there another lighter way to do it?
View 3 Replies
View Related
Apr 27, 2010
I've had Windows 7 installed for a few months now and would like to install Fedora 12 on a separate partition. I've tried this three times now, all of them ending with something wrong. The problem that exists for me now is that when I install Fedora 12 and boot up for the first time in GRUB, Fedora 12 works fine. ut when I boot into Windows 7 from GRUB, it just comes up with a black screen and says "BOOTMGR is missing; press ctrl + alt + del to restart" at the top. I don't believe that GRUB is booting into the wrong partition because I have no Windows recovery partition, just Windows 7. Also when I try and fix the Windows 7 partition with the system recovery disk, it says that the volume is corrupt every time. At this point I have everything backed up on a separate drive so I'm open to try installing Fedora 12 again even if it risks screwing up my Windows 7 partition, I would really just like to have a functioning dual boot.
View 2 Replies
View Related
Apr 3, 2011
I'm dual booting Windows 7 and openSUSE. I attempted to start up my computer, and got ERROR 17 on the GRUB loading page. I am assuming this is related to me disabling the openSUSE uninstaller on startup in Windows.installer seemed completely superfluous.
View 9 Replies
View Related
May 25, 2010
Is fedora 13 using GRuB 2 or still uses GRuB legacy?
View 8 Replies
View Related
Feb 26, 2010
I've been running openSuse 11.2 for a while on my notebook.Today I turned it off at work and came home. When I tried to turn it on, it boots, shows a black screen written 'GRUB' and then NOTHING. It doesn't complete the boot process.
View 9 Replies
View Related
Jul 19, 2010
My friend recently installed ubuntu to his existing computer which had windows XP. Today when he tried to start the PC it showed the error
[Code]...
View 3 Replies
View Related
Dec 7, 2010
I'm dual-booting windows 7 on (hd0,0) and Fedora 13 on (hd0,4) and it's working fine until I repaired my windows 7. Afiter I did the repair on my windows 7, The booting sequence now skips the grub menu and automatically boots into windows without allowing me to take my pick.
View 1 Replies
View Related
Dec 20, 2010
I've been using Linux for over a decade, so no need to worry about the obvious. I'm positive that I have my partitions/install correct. What has me baffled is that Fedora 14, which uses GRUB 0.97 (GRUB legacy) - boots Windows flawlessly every single time on the same hardware, but Ubuntu's (or the upstream Debian's) GRUB legacy do not - even though they are based on the same upstream code from the GNU Savannah servers.
No matter what I've tried I cannot get the Debian or Ubuntu version of GRUB/GRUB-legacy to boot any recent Windows 64 beyond XP (Vista or 7). All that it does is resets the computer when Windows attempts to boot, without an error. GRUB is notoriously difficult to compile, so before I try to compile code from RedHat's archives - any thoughts,experiences, similar issues - whatever?
View 9 Replies
View Related
Aug 21, 2011
I'm kinda new to Linux. My problem is that a new Fedora O/S entry is added onto grub everytime I receive an update on Fedora (I think). Eg:
Fedora 15 15.40.0-4 ...
Fedora 15 15.40.0-3 ...
Fedora 15 15.38.0-0 ...
Windows 7
How do I stop this? Ideally I'll only have two entries, Fedora 15 and Windows 7 where Windows is set as the default primary o/s to boot up. The current method I use is to fiddle around with that grub file and set default to entry 3, which used to be Windows 7 but is now a Fedora (which means Fedora is now set to default boot up).
View 4 Replies
View Related
Feb 18, 2010
Debian if my first OS and i want to dual boot Fedora12.Ok i installed Fedora12 and choose not to install the bootloader(gonna use the one Debian installed)What i'm tring to do in Debain is edit my /boot/grub/menu.lst
Here is what i have
Code:
title Debian GNU/Linux, kernel 2.6.26-1-686
root (hd0,0)
kernel /boot/vmlinuz-2.6.26-1-686 root=/dev/hda1 ro quiet
initrd /boot/initrd.img-2.6.26-1-686
code....
View 4 Replies
View Related
Jul 19, 2010
how to replace grub2 with grub-legacy hassle-free? I mean, is there any danger in doing the following procedure: purging grub2 and installing the legacy version after that? I'm using Squeeze system with ext4.
View 1 Replies
View Related
Jul 28, 2011
I'm currently running the XFCE Spin of Fedora 15 (Xedora, as I like to call it (; ) on 64 bit, so sometimes I need a 32 bit environment to try stuff out.
I recently installed Linux Mint on a partition formatted to btrfs, and this is where my problems start, as I have no idea how to add this installation to my existing GRUB configuration. The grub.cfg on the Mint partition looks like this (GRUB2 btw.):
Code:
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
[Code].....
View 6 Replies
View Related
Sep 9, 2010
I'm currently trying to get to the root of an problem on startup; unfortunatly when booting after the first couple of messages when booting without quiet and with nosplash in the grub menu I still end up with the nice blue background and the slowly filling bubble... I'd like to go back to the old, boring, messy, but much loved and now much missed (least by me) text boot screen where I can see wtf my system is doing and where its hanging during the boot process.
(I know the cause of the hang now but still want to go back to the old fashioned noisy boot environment - not a fan of the windows style silent boot... I like to know what's going on and that my PC hasn't decided to join the French and go on strike, though wouldn't blame my poor netbook if it has, hammering the bleeper doing random number analysis - not something an atom 270 is designed for)
View 3 Replies
View Related
Aug 19, 2010
I would like to know if what I am thinking is possible and, if so how to set it up. I have a Compaq Workstation that I have loaded on it VMWare ESX 3.5 and FreeBSD. I have successfully edited the grub menu.lst file to boot into either, but i would like to select my choice from another machine running Win7 using Putty ( Since I only have one monitor and keyboard!
Once my workstation loads the grub, presenting the options of OS's, is there a way using putty or some other software GUI on my Win7 machine to see that grub menu and then select which OS the workstation should boot into? ( ESX 3.5 or FreeBSD - This would come in handy so I dont have to disconnect my monitor, keyboard and mouse each time just to select the desired OS!!!)
View 1 Replies
View Related
Nov 20, 2010
my Setup is Fedora 14 x64 + radeon hd 4830 i've downloaded .run package from ati site with latest driver for x64 systems. installed it, but didn't edited grub.conf becouse i didn't understood anything there (probably didn't spent enough time to get things understand) Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen. nothing works except Ctrl+Alt+Delete. system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
View 4 Replies
View Related
Mar 7, 2009
I am new to Fedora, having used Ubuntu for 2 years. However, I am a little dissappointed in the latest Ubuntu releases and want to try something new. So I installed Fedora 10 on my second hard drive, deleting Ubuntu. On my first hard drive, I have Vista installed. During installation I followed a guide for dual-booting and it said not to install Grub to the MBR of the Windows partition, so I followed that advice...
This caused a Grub error 15 on the next boot. I booted the Fedora installation from the second hard drive. My hypothesis is that the Grub bootloader of Ubuntu was still installed somewhere and it could not find the Ubuntu linux kernel. Therefore, it gave error 15. So I installed Vista again and am hesitant to try Fedora again... How can I install Fedora alongside Vista properly (as dual boot)?
Or should I stay away, because it is apparently too difficult for me? Is it worthwhile to make a separate /home partition as I read that it is preferred to do a clean install every release? Could I just do that with Gparted and then assign the partition as /home in the Anaconda installer? The downside is that I then need to create a swap and / partition too, right?
View 6 Replies
View Related
May 21, 2009
I am a novice in Linux but due to my academic requirement I had to install Linux (Fedora 8). I have 2 hard disk's (80GB & 20GB), on the first HD which is 80GB I have Windows XP and the other one I partitioned and installed Linux. Now the first problem is that, whenever I start my PC I get a error which says "GRUB hard disk error", however when I restart the machine it's fine and gives me the boot options.
Secondly, the HD containing windows was affected by virus so I had to format & reinstall XP. Strangely after that I am not getting any boot options and it's like windows is the only 1 OS running. But on windows the partition on which Linux is installed in intact. So I assume something is deleted maybe the Linux boot file.
View 5 Replies
View Related
Jul 2, 2011
i am having some issues with dual booting my SL6.1 and Windows. The situation is that i recently acquired an old hard drive from a non-working computer of mine with Windows already installed (i know the windows is functional, as i tested it on my new PC with SL6.1 currently installed & everything runs fine)
The problem is that after editing the grub.config to include windows, windows will no longer boot after an attempt to install a legit version of McAffee anti-virus software which coincidently was only after the first attempt at running both OS's in a dual-boot fashion. Except past the windows start up screen before the dreaded blue-screen.
Which is weird because SL6.1 OS will still boot & works perfectly fine like always, so it doesn't really make sense.
My current setup is:
Disk 1: Solid-State:
Boot Partition
SL6 LVM1: Root Partition
Disk 2: Hard Drive:
SL6 LVM2: User, Temp & Swap Space Partitions (Different LVM to Root)
Disk 3: Hard Drive:
Windows 7 Professional 64-bit
My guess is its windows MBR. The reason i say this is because the Hard Drive contents of the Windows software still appears intact when accessing the drive from the Linux OS. I don't won't to go through the rigmarole of re-installing both OS's. So hopefully their is a relatively simple solution.
View 9 Replies
View Related
Jan 27, 2010
Right, so I've looked high and low for the answer to this problem and haven't found it, although I've found a million and a half threads about grub especially when it comes to dual booting windows. Which I'm not. What I am though, I suspect, is an idiot who shouldn't mess around with my computer at 4 am.
So the problem is every time I turn on my pc, grub tells me it can't find a file system and goes into recovery mode. Can't boot into ubuntu at all. Am using the live disk to type this.
I also think I know why grub is doing this, I was dual booting windows before, I had windows installed originally, added ubuntu to a new partition. Was having problems with grub. Figured that reinstalling it wouldn't be a bad idea, it might fix it. In that process I did something rather stupid, I accidentally installed grub to my other internal hard drive. There is no operating system on it. Just movies, music, etc. The problem, I think, is that my second hard drive is sda, and the one with my os is sdb, which I suspect means that grub is loading from sda and finding no operating system, rather than from sdb. (It's like that because my larger drive wouldn't fit into the sda slot on my computer, long story.) How do I remove grub from sda?
View 3 Replies
View Related
Jun 23, 2011
I am a bit confused about a dual booting system. I Already have windows 7 on my computer and wish to install ubuntu 11.04 but I keep reading about Grub 2. Does grub automatically install with ubuntu or do I need to install it prior to installing ubutu ?
View 10 Replies
View Related
Jul 5, 2011
I just installed Fedora15 on my laptop. When the installation completed, the system rebooted and gave me a Grub Error 17. I logged in the rescue mode and got the following output from
Code:
fdisk -ls
Code:
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0d8b0d8a .....
View 5 Replies
View Related
Jul 21, 2011
I installed Ubuntu 11.04 today as the main OS on my laptop.I had deleted my XP partition, and repartitioned it according to a guide I had found. (http:url)......Basically it was setup like this: 500mb ext2 primary partition, has the grub folder, I believe this is either the '/' partition, or the '/boot' partition 2gb swap space logical partition
10gb ext4 logical partition -- this is either the '/' or the '/boot', it contains the 'bin,boot,cdrom,dev' etc folders 243gb (the rest of my hard drive, with the exception of a partition that contains documents and files from my XP OS, formatted to NTFS) ext4, this is the one that has all my desktop/documents/etc folders.After Ubuntu was done installing, I had some message pop up about installing an ATI proprietary driver for my ATI graphics card (an ATI Radeon HD 4330, I believe, I may have messed that number up). I installed it and rebooted, no problem.
Next, I had another update window pop up with 198 items checked and ready to download and install. I went through all of this, and rebooted, again, no problem.Next thing I did was install some apps that were essential for me to have to use for my work (an ide, chat programs, etc). No problem with any of that.Last thing to install was the OSE Virtualbox, and then I installed WindowsXP Pro and Windows Vista Business, then installed the guest addition addon for VB. This all worked without any issues whatsoever.
Time goes on, and I notice my computer is heating up much more than (seemingly) normal. I begin to wonder if its my graphics card. So I shut down the computer and let it cool down. Reboot, and no problem, still working fine.Then I opened a couple of apps and tried a simple game (can't remember the name) I believe it was a simple 3d topdown, as I wanted to test my graphics card. This is where things seemed to start to go wrong. My laptop began hanging, not even allowing me to access the terminal via ctrl+alt+f2. The screen flashed and I saw the blue/green/grey fuzz that I get when the graphics card is starting to heat up too much. Then everything hangs and I can't do anything at all, including move the mouse. I did a hard reboot (I believe this is what you call pulling the plug/pressing the power button, correct me if I'm wrong). I then rebooted, saw a chkdisk, then it booted seemingly normal, but it hung right after the purple screen after the grub screen.
This is pretty much where I'm at right now. I strongly suspect the fault is with the ATI drivers, but have been completely unsuccessful in my attempts to fix it. I've googled just about everything I could think of, along with searching these forums. I've tried just about everything listed in the forums, but to no avail.I've tried the commands that are supposed to purge the ati drivers, but all I get are errors that say they can't remove the 'virtual drivers'.
Right now I'm booting off a live cd, so I know the computer still works fine, just not my actual installed OS. I'd really like to get the issue resolved without having to reinstall, as it took quite awhile just to get it usable in the first place, but this has already taken so much time, I may just resort to that if we can't solve it any other way. Got too much work to catch up on as it is.As a re-instated note, perhaps if you have any tips, but not particularly about fixing the OS, my laptop (I'm strongly guessing my graphics card) is heating up much more than normal, compared to that when XP was installed. Is this more than likely just a driver issue, as is the rest of it? Also, I did have Compiz installed, though I didn't choose for it to be installed, I believe it came pre-installed. I've heard it could cause some issues, though I have no idea as to the validity or relation to this particular issue.
Edit:
I just remembered while searching for a solution, I found a post somewhere that said something about the information not being sent to the monitor from the graphics card properly, thus no desktop. I'm guessing that'd still fall under the driver issues, but again, I'm unsure. I would think that wouldn't be entirely true anyway, since I can still see my mouse fine, just no desktop, only a black screen.
View 1 Replies
View Related
Nov 21, 2009
since i have installed the nvidia drivers i have lost the graphical boot and just had a bar at the bottom of the screen instead. i tried to get the graphical screen back by adding vga=795 to my /boot/grub/grub.conf but when i rebooted not only did i not get the graphical boot or the toolbar at bottom.
i got list of all the drivers and services it is starting with ok next to it. i have also since doing this lost the bit when restarting or shutting down getting the words restarting or shutting down and just get blank screen with flashing cursor. i removed the vga=795 and i still get the list of drivers/services loading.
how do i get the quiet option back. i have checked /boot/grub/grub.conf and it has the quiet in it.i have also tried running update-grub but get message command not found. i have attached the grub.conf file
View 3 Replies
View Related
Feb 22, 2011
another post about this. I just don't know how to handle this, as I'm pretty nsee the grub loading menu, but screen just freezes after, no way I can reboot, or open a console. In recovery mode I can log as root in console, though.I run Debian 6, 64 bits. I have an intel q6600 and a nvidia geforce 9800GX2.
View 9 Replies
View Related
Jun 30, 2010
i could not change the sequence of dual booting from the grub menu.lst, due to it shows a blank screen when i put the command in the terminalayan@jayan-desktop:~$ sudo gedit /boot/grub/menu.lst [sudo] password for jayan:
View 6 Replies
View Related
Feb 24, 2011
I installed 9.04 then upgraded all the way to 10.04 and I am sticking with this version now.I just tried updating the Legacy Grub to Grub 2. My version of Grub right now is 1.98.Somthing went wrong when I doing the "upgrade-from-grub-legacy" command and I got error 15 or something to that nature. I fixed that by booting in to my live 9.04 cd and long story short, I mounted the drive to replace the grub and all worked well. I am able to boot right back up now *wipes sweat off for-head*.... HUGE accomplishment for me and I feel like a real linux geek now hahaha.I again ran...
Code:
~$sudo upgrade-from-grub-legacy
And I am prompted with this...
[code]....
View 4 Replies
View Related
Mar 17, 2011
Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen....nothing works except Ctrl+Alt+Delete....system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
View 6 Replies
View Related
