Debian Installation :: Black Screen - No Visible Desktop
May 20, 2010
I have a problem after installing Debian and running it on my machine. Instead of taking me to a splash login screen, it instead remains a black screen like a console where I type in my username and password, and it remains in this black command line mode beginning ben@ben-desktop:~$. Like it does in a terminal. What can I do to resolve this? This is completely new to me and hasn't happened to me in Ubuntu or Mint. I am familiar with using the terminal for the odd task but obviously I can't use it like this without a visible desktop.
View 14 Replies
ADVERTISEMENT
Sep 14, 2010
Trying to install Ubuntu 10.04 desktop (amd64) on this brand new system:
I connected the Dell ST2410 24" Full HD Widescreen LCD to the HDMI port on the ATI card and Windows 7 boots up just fine.
So then I put in the "ubuntu-10.04-desktop-amd64.iso" CD in drive and reboot the system. I see the Ubuntu logo with the dots for a while and then the LCD goes black. The LCD reports that there is no signal from the system. The power light in front of the LCD goes from white to amber. The keyboard stops responding.
I power off everything, remove the Ubuntu CD and reboot the system and it works fine again with Windows 7.
The CD has no problems. At boot time, I checked it for defects and it reports no errors. At boot time, I used this same CD to check the system for memory errors. No memory errors. I used the same CD to install Ubuntu on other systems and had no problems.
The 16X DVDRW Drive has no problems. In Windows 7 it can play CDs and DVDs.
View 5 Replies
View Related
Feb 22, 2011
another post about this. I just don't know how to handle this, as I'm pretty nsee the grub loading menu, but screen just freezes after, no way I can reboot, or open a console. In recovery mode I can log as root in console, though.I run Debian 6, 64 bits. I have an intel q6600 and a nvidia geforce 9800GX2.
View 9 Replies
View Related
Jul 20, 2009
I cannot install FC11 or FC10 on my Dell XPS One/A2420 machine. Every time I tried to install the Linux operating system, the screen goes black and the computer goes no response. It seems to have something to do with the video card--Intel GMA X4500HD Graphics.
View 1 Replies
View Related
Jun 2, 2011
I install UBUNTU 1104 on HP Desktop PC, but now it doesnt start. Just appears a Black screen with this msg: Error Code = 1001.
I want reinstall but PC is not reading CD, But the CD drive is working.
I install UBUNTU 11 in other 6 PCs, and work fine.
PC inf.: HP Compaq dc5800 Small Form Factor
I never install Windows on this PC. The original OS was UBUNTU 9.04 and updates.
View 2 Replies
View Related
Jun 30, 2015
I have problem with my Debian. Sometimes after reboot I can see only mouse cursor (moveable) and black screen with command prompt in top -left corner. I don't know how to fix it...
Code: Select allroot@debian:/home/rafal# lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description: Debian GNU/Linux 8.1 (jessie)
Release: 8.1
Codename: jessie
[code]....àwwwwwwwwwwwwwwwwwwww~s
View 9 Replies
View Related
Dec 14, 2010
I've been running 5.05. Just in the last few weeks after I update the screen will go black after a few reboots. I believe it has something to do with the ATI Drivers. If I clean install and install the smxi drivers after a few reboots the screen goes black right before the log in screen. This also happens with Mepis and Dream Linux which are Debian Base.
View 6 Replies
View Related
Jan 8, 2011
after a couple of years using Debian derivatives, I decided to try debian 5. Seemed to install okay. Installed Mint afterwards (as debian didnt boot) and debian is visible in the boot menu. Upon selection of debian, I just get a black screen and the monitor gives the message "input not supported". I havent had any such problems with numerous distros over the 2 years.
View 10 Replies
View Related
Aug 22, 2014
I thought I'd breathe some new life into my aging PowerMac G5 desktop computer by installing debian. I burned the CD and ran the installer and everything installed okay, but when I went to boot it up for the first time, the screen blacked out after a few seconds of scrolling text and shows no signs of life after that. The computer just stops sending video to the monitor, and the only thing I can do is shut it down by holding down the power key.
View 13 Replies
View Related
Dec 28, 2014
I am a complete beginner to Linux (I understand a little bit of terminal from my OSX usage). I did a fresh install of Debian on an older Gateway laptop to try and make it usable for something. There is no other OS installed to this machine, I would like it to run Debian exclusively.
I used the UNetbootin application to install Debian from USB [URL] ..... Everything seemed to install just fine (no errors). However, upon 1st boot, I am presented with a black screen with a blinking white cursor. I cannot seem to get past this. I searched around and found this post: [URL] ... which seems identical except that their machine is a Mac. I had no luck using the REISUB reboot method. When I hold Alt+SysRq or Alt+PrtSc, it makes a lot of beeping noise. Issuing the REISUB keystrokes while holding does nothing.
View 14 Replies
View Related
Mar 8, 2010
I've just put a fresh install of 64 bit Lenny on my new HP server. All went well so I thought to install KDE. On reboot, the screen just goes black.Could I have some helpful suggestions on how to start working out what the problem could be?
View 7 Replies
View Related
Apr 22, 2011
I get black screen when i press ctrl-alt-f1 or when i try to stop gdm, pressing alt-f7 nothing happens.
vga is ati hd 5650 how can i fix?
View 1 Replies
View Related
Jul 16, 2015
I got a Lenovo T430s and when I boot up the USB I am presented with different options like
install
install graphical
install 64
install 64 graphical
etc
When I pick one and hit Enter I am presented with a black screen.
View 6 Replies
View Related
Aug 16, 2015
On a Zenbook UX305, I did a fresh install of Debian. After booting, the screen turns black and I can't switch between terminals by typing Ctrl-Alt-F1..F7. After a boot with the keyword debug, the file /var/log/debug has the following contents:
URL] ....
View 4 Replies
View Related
Sep 19, 2015
Yesterday I installed Debian Jessie, I ran into a few problems at first, but in the end everything worked fine. It started the desktop environment (gnome). I installed a few programs(sudo, chromium, tor) and saw that everything was working correctly. I shutdown the system with the command "shutdown now". Then I booted into windows to make sure I hadn't broken anything there (which I did not), but when I tried going back to Debian, it booted to a black screen with a cross as a pointer. By pressing ALT CTRL <FKEY>, I can effectively get to other virtual terminals and login there, however trying to start the desktop environment with "startx" results in the same thing.
I installed Debian on an external hard drive and made four partitions, boot, /(root), /home, and swap.
I also tried to apt-get install --reinstall gnome and apt-get install --reinstall xorg, but the result is still the same
Not actually solved, but in the end just reinstalling got rid of the problem.
View 6 Replies
View Related
Feb 23, 2016
I have installed Debian Jessie 8.0.3 64-bit net install on a MSI CX620. Installation went fine but trying to boot it up the first time nothing but a black screen shows up. I've tried:
Holding shift on startup - Nothing
Press down all keys - Not much, only ctrl+alt+delete makes the screen turn off and then on again.
I'm thinking that I had secure boot on which I now after installation see could be a problem, but I didn't think it would be a problem as I could just go into bios and turn it off, but seeing now that I can't even go into bios it may be a problem.
View 2 Replies
View Related
Dec 31, 2010
I'm trying to install Xorg manually in Squeeze on my IBM X30 Thinkpad with intel graphics (it works in Lenny). I used aptitude and installed "xorg" and "fluxbox", but when I restart my computer I get a blank screen, instead of the console login request that I was expecting. (Note: I did not install any login managers). So exactly what happens is that the screen goes black (just backlight on)during boot process. Once I'm at the black screen doing CTRL+ALT+Backspac, Ctrl+Alt+Del or Ctrl+Alt+F[1-7] will not result in anything.
I tried booting with the single user mode, but same result, so the only way I could acess my log-files was by using a systemrescue-CD. What I find odd about this is that I cant find any configuration files at all. No xorg.conf anywhere in /etc, /etc/X11, nor in /home. I don't even have a /etc/X11/xorg.conf.d folder.Am I expected to write these by myself? And if Xorg is the source of my troubles, why is it starting by itself, without any installed login managers? Xorg not working is one thing, but not even being able to access the console, or log in to my computer makes it rather difficult to search for errors.
View 7 Replies
View Related
Jul 15, 2011
The screen goes black while "waiting to populate /dev/"and only by adding acpi=off can I boot into my system, and then I see that I get an error message during boot when "populating /dev/ " that says"fatal error during GPU init", even after I've installed the firmware-linux-nonfree.deb, which is the one for the R300 family, which I'm guessing is the right one, since lspci tells me I have:Radeon IGP 330M/340M/350MI've read the wiki[URL]
View 5 Replies
View Related
May 14, 2015
I installed jessie amd64 lxde to a thumb drive to use with a laptop. Vanilla install using the amd64 lxde live cd. Upon booting the usb system, I am presented with a black screen with blinking cursor. No grub screen, no ability to type any commands and no ability to switch to another terminal. I tried booting into the live cd and I could get into the intro splash screen. Booting to the live system from there would also hang at a black screen.
However, using the kernel parameter "nomodeset" from the splash screen did allow the live system to boot to the desktop. I booted the live system, mounted the usb system and chrooted into it. I edited /etc/default/grub to include "nomodeset" in the GRUB_CMDLINE_LINUX_DEFAULT and GRUB_CMDLINE_LINUX variables and then ran update-grub.
Upon reboot to the usb system the problem still occurred. The video card in question is a amd firepro 5800m which has an lspci line of mobile radeon 5000 series. This card was supported in wheezy and apparently works with the live system.
View 5 Replies
View Related
Jan 3, 2011
I am using the actual "testing", Debian works in version 5 on my notebook (or at least starts), but I can't use it b/c I have too much new hardware what is already implemented in the testint Version. I already had debian 6 running but that wasn't the good way to do it.
I have an Alienware m17x R1, with a q9000, a nivida mobile 260gtx. I know that the Problem the basic Debian Driver for Nvidia cards is. It is enough if I can use at least the command line of Debian to install an actual Nvidida driver and get the system running. But that's not possible!
I solved it once, with plugging in an External Monitor to my Notebook, but I don't have one at home at the moment and honestly there must be a better way for. How to "let debian 6. use the Notebook Screen"?
View 4 Replies
View Related
Aug 29, 2014
I appear to have the exact problem that is currently listed in the 7.6 errata about EFI boot and black screen while trying to install ("Potential issues with UEFI booting on amd64"). The problem is that their workaround is not an option for me. This is a new rig and the motherboard doesn't appear to have any kind of ability to disable secure boot. I also don't know if my problem is exactly what they're thinking when it comes to that entry.
I'm able to get to the Grub install screen where you have the option to install Debian but when I select an option (any option) the screen turns off, back on but is black. All activity in the system stops after a few seconds (3-5 seconds) and that's it, she's done. I've tried all the options to try and disable secure boot but the options listed below are as close as I can get (and apparently should be sufficient).
The CD ISO used was the 7.6 netinst CD. I've also tried the Jessie ISO (Testing) that was downloaded about 2 hours ago. Same results. Unlike the errata which says "intermittent booting problems", my issue is consistently reproduced with no other result no matter what I do.
The rig:
-Asus H97-Plus running revision 2202
-Intel i5-4570
-32GB DDR3-1600
-128GB SSD Drive
-No external video card - using on board only but have tried both VGA and HDMI ports with the same result.
BIOS settings (is it still called BIOS or is it UEFI now?)
-Fast Boot: Disabled
-Launch CSM: Enabled
-Boot Device Control: "Legacy OPROM Only" or "UEFI and Legacy OPROM" (tried both)
-Secure Boot State: Enabled (it's grayed out and I'm unable to change this)
-OS Type: Other OS (supposedly makes it so you can boot non-Windows OS)
The Debian page with the errata: [URL] ...
Look for "Potential issues with UEFI booting on amd64"
The obvious suggestions I've tried:
-tried USB boot & CD boot - same result
-tried altering the grub script to add the ACPI options - no effect
View 1 Replies
View Related
Apr 29, 2011
After installing debian squeeze I tried installing a nvidia driver. I had to type: /etc/init.d/gdm3 stop The nvidia driver wouldn't install because the 'make' command was missing in a path or something. Now I cannot get the GUI anymore. startx gives me a blank screen rebooting the computer gives me a blank screen. I can only boot in recovery mode. but the nic doesnt work so no internet connection.
View 1 Replies
View Related
May 20, 2011
I have installed Debian a few times now (and other distro's), so I'm fairly used to installing linux. I'm not used to installing it on Apple hardware (back in 2009 on my laptop I had some issues that were solved rather quickly, but that's about it). Now I'm installing Debian Squeeze on a new (well, bought today, but it is the previous model: iMac 11,2) desktop iMac.
Installing goes well (resizing partition, rEFIt, booting Debian 6.0.1a netinstall CD, installing packages etc.) I followed a tutorial [URL] to install grub explicitly with force after installing and running gptsync. Everything went according to the tutorial and I rebooted to be welcomed by rEFIt and then grub: perfect!
BUT when I chose Debian in the grub-selection list, I only see a few lines of starting the kernel, and then my screen goes all black. A few seconds later I hear a sound, and iirc it's the sound of gdm prompting to select a user. I cannot switch to a TTY and I have to use the power-button to shut the system down.
View 6 Replies
View Related
Jun 20, 2010
The computer was working fine last night, when I woke up this morning (I leave it on) it was making strange noises through the speakers and I had a blank screen, restarted a few times had some page full of code and wouldn't move on from there, I went out came back started it up and it did everything normally except instead of a desktop I had a black screen, however strangely enough when I press the power button on the PC a shut down menu comes up, and the mouse works and I can select from the options. I am on an Nvidia ION tho. How do I boot into a safe mode as such? as at the moment I'm using a ubuntu live CD to read the forums!
On the GRUB menu, seclect "Ubuntu (recovery mode)" (not exact wording). You'll get scrolling boot messages until you get to a screen with a grey box and some options. Use the arrow keys to select "x failsafe graphics mode" or something of the like. Press enter and you'll probably get a message that your card can't be detected or something. Press okay and continue. Your screen will be messed up, but you'll be in. It probably isn't the same problem, as you don't have an ATI card and can see a shutdown menu, but good Luck!
How do you bring up the GRUB menu? My PC isnt dual booted so I never see any menus at all, I thought all I had to do was press F8 during boot up? No, F8 is Windows. Hold down shift when booting to see the menu. Downloaded & Installed the 10.6 driver and everything is working fine. Unminimizing apps works much faster with this driver . However, /usr/bin/aticonfig --initial results in
Code:
Found fglrx primary device section
Using /etc/X11/xorg.conf
Saved back-up to /etc/X11/xorg.conf.fglrx-2
/usr/bin/aticonfig: Writing to '/etc/X11/xorg.conf' failed. Bad file descriptor.
Right now I've tried what "jxtreme" suggested on quote nr2 however when I go into recovery mode I get a load of code scrolling through the screen as its supposed to but I never get any box with options as he says, it just gets to a point where there's a small white cursor flashing at me half way down the screen and it stays there...
View 9 Replies
View Related
Jul 29, 2010
I have just loaded Ubuntu 10.04 onto a hard drive and then booted using my laptop and it boots all fine and I get to the desktop. After I get to the desktop in around 10-20 seconds the screen suddenly goes black and the mouse disappears and I can't do anything. The fan still goes but thats about it, I have to hard shut down and load up again but it just keeps happening. Not sure what to do next?
Its an old Toshiba Satellite laptop
1.6 ghz processor
1gb RAM
View 8 Replies
View Related
Nov 5, 2010
This morning I did some recommended updates for Lucid with update manager. This afternoon at start up I get a black screen after booting. I can hear the sound effect for the login, and if I key in my password, I hear the Ubuntu signature tune, i.e. it is booting and starting up. But my screen is just black with the arrow-shaped pointer, which I can move across the screen with the mouse. Other than that, nothin
View 9 Replies
View Related
May 12, 2010
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies
View Related
Sep 22, 2010
In ubuntu 10.04 I have compiz installed and when I try to rotate the cube or simply change desktops screen goes black but not entirely, I mean I can still see the cube. This happens only during the change of desktops. Its very annoying,it doesn't create trouble but I cant see the cube effect.
View 9 Replies
View Related
Apr 5, 2011
ive just installed Xubuntu Desktop on to my computer, it runs fine, everything loads and so on. but after i log on the bottom 3rd of my screen is completely black
View 1 Replies
View Related
Mar 19, 2010
whenever i open my kubuntu desktop it brings a black screen. the pointer of the mouse is active but i cannot see anything.but my gnome desktop works well.what might be wrong?
View 5 Replies
View Related
