I have some problems with my WiFi card I'm configuring for Debian Wheezy. I've used it in other computers successfully (It's a USB device), but this box doesn't seem to be able to recognize it or use it properly.
I've identified the card using Code: Select alllsusb with the output Code: Select allBus 001 Device 002: ID 7392:7811 Edimax Technology Co., Ltd EW-7811Un 802.11n Wireless Adapter [Realtek RTL8188CUS]
I've used the Wheezy docs to download the firmware necessary and it apparently is supposed to run fine with this firmware, but nothing is working. There was mention to a GitHub repository of a fixed version of the driver in question, which didn't work either.
i m using backtrack 4 in vmware.i want to use my laptop in built wireless card to search for the near by wifi access point which it is not doing,, my wifi card is " Intel(R) PRO/Wireless 3945ABG Network Connection"
With my Compaq CQ62 it seems I can either have a distro provide a working wifi or a working soundcard but not both. I would love to have Linux working properly. Wireless internet works great in Windows 7. The ethernet works perfectly when I plug directly into my router, but pressing the wireless button will not change the light on it from orange to white or do anything else. Yet a simple distro like crunchbang or kubuntu seems to make the wireless work fine.
They just cant make my soundcard work. Being that there is at least some sort of a protocol for installing wireless drivers, I figured I would go with the distro that gives me SOUND since installing a sound driver seems unheard of or impossible. I have a realtek wireless network card in my laptop that Fedora, one of the biggest names in Linux, seems oblivious to even recognize. When I click on the network icon and go to Manage Connections, the Wireless tab is greyed out and cannot be clicked on.
Finally took the plunge and upgraded my ubuntu studio to karmic from jaunty. I seem to be experiencing a problem many have, being that my wifi card (edimax) which worked on my previous distro is now not working at all. I've done a lot of research and found the problem seems to mainly be with broadcom cards, and have tried a number of things relating to those that have worked for others, with no luck.
My problem seems to be not that the drivers wont activate or anything like that, my problem is that under hardware drivers nothing appears at all. I have no drivers present, where most people are talking of 3. i have not found anyone else with this problem. My problem is compounded in addition by not being about to use a wire connection at all.
I am currently using Ubuntu 10.04 Lucid Lynx. Although it has worked fine for the past couple of weeks, I have recently encountered a problem with my wireless card. It is an Atheros AR928X card on a Toshiba satellite U405D-S2874 model laptop. Recently, I attempted to put the computer into suspend mode for the first time. The computer failed to wake up, and I performed a hard reboot. After this, everything seems to work except for the wireless card. I am now unable to connect to any wireless network with my laptop, and the wireless manager doesn't seem to be working either.
I am using a Fujitsu Amilo pi3560 with a Realtek rtl8172 wireless card, and running the latest driver (rtl8192se_linux_2.6.0014.0115.2010). The OS is Ubuntu 9.10. Everything runs perfectly - when my laptop is connected with the power cord. But when I go battery the wireless disconnects after a few minutes. It then asks for the wpa password, searches for the router, asks again, and so on indefinitely, until I reboot and it all replays once more.
I'm dual booting windows 7 64 bit and Ubuntu 10.1 64 bit on my Dell Inspiron 11z with an embedded WiMAX/WiFi Link 6050 series wireless card made from Intel. I only use it for wifi, not 3g or wimax. I installed the latest driver from intellinuxwireless.org, iwlwifi-6050-ucode-41.28.5.1, but it still doesn't seem to work. I ran these terminal commands from another thread:
cd Desktop/wlwifi-6050-ucode-9.201.4.1 sudo cp iwlwifi-6050-4.ucode /lib/firmware sudo chmod 644 /lib/firmware/iwlwifi*
[code]....
After running "sudo rmmod -f iwlagn sudo modprobe iwlagn", I get this read out for my wireless card.
*-network DISABLED description: Wireless interface product: WiMAX/WiFi Link 6050 Series vendor: Intel Corporation
[code]....
In the ubuntu help section it tells me to flip a manual wifi switch to enable it, but pressing my windows wifi button, F2, doesn't appear to do anything while in ubuntu. The only experience I have working with linux is typing some terminal commands on my android phone to root it.
I booted Debian in Live mode on a USB to try to see if the internet will work on my Linux machine before I actually install it (there is some tricky internet software where I live that I must overcome, but that will come in another thread).
Currently I have no WiFi whatsoever. When I go into the internet access menu I only get back the fact that there is a wired connection that's possible (theoretically, I should be able to also see networks to which I can connect to, but I don't). Also, it's impossible for me to actually get a wired connection going, unless I can somehow give it through my Windows laptop.
When I did some research, the people seem to say that I need to update the driver after enabling the use of non-free software; I can't do that since I have no connection in the first place.
The OS recognizes that the PCE exists (I am using asus pce-ac68), when I did "lspci" command it told me I have BCM4360 and BCM43225 chips.
I think I found the drivers here "[URL] ......" but I don't think my chip is listed there (there is no BCM4360 or BCM43225 on that list). What to do with those drivers, I mean how to compile them and install them on a Debian machine, and I'm not sure I can even install them on a live boot (but I want to make sure my internet works on the live boot before I actually install the OS).
I'm was trying to choose between GNOME and KDE for version 8. However both the live DVD's fail to pick up the Wifi card on my system. I am also unable to use certain basic commands such as ifconfig on the live CD. I am completely new to Linux and Debian (of course). Pardon me for the hand holding. This will be my first install of a Linux system.
What steps I can take to ensure that the Wifi card and the network card will be supported - hardware compatibility test maybe? Is there a way to try before installing? This will be a dualboot with Windows 8.1
Wifi card: Ralink RT3290 802.11bgn Wi-Fi Adapter LAN card: Realtek PCIe GBE Family Controller
I'm a brand new user of Debian, and I just bought a (too much?) new laptop, the HP 430 G2. It seems to work great for almost everything, except that I don't have any wifi available.
I tried so many different things (without any success) that it would be hard to resume. But for now, all I have is a new installation (to avoid parasite installations of weird things), and a kernel updated to 3.16. I don't know if it's useful though...
The first element I notice is that I don't have the line with "Kernel driver in use...". Which seems to indicate that there's a problem with the kernel module (is that right?). But I don't know how to fix it...
The other thing that puzzles me with these last two commands is that according to this page, my wifi card is a Broadcom BCM43142. But it's not the result I get with the lspci command.
Anyway, I'm really lost, I don't know what to do, what to check, what to install. I don't want to go by random, testing all the different solutions I see on the web blindely. This is the reason why I ask it here.
I have an intel 7265 AC wireless card. When I try to download something my estimated download time is tripled almost every 5 mins.And when I play an online game from steam (cs:go or dota2) the ping goes to 250-300 ms which generally stays around 80ms. I'm using debian jessie. So far, I've tried turning of the power save mode of the card, changing ISP and router but none of them worked. I have a fairly good internet connection (I'm using it with my other machines without a problem) so I don't think the connection or router is the problem. Below you can find some information about system.
I am trying to get an engenius EUB 9801 going in Debian 6.0 Stable. I have searched this forum, and other linux forums but no luck. It is based on a Ralink rt3572sta chip, the 2.4/5ghz 300mbps wireless N chipset. I will post the link to the Ubuntu forum, where they have been able to get it working under 10.10.[URL]..the link to the linux chipset driver is:[URL]... It would be nice to have this natively supported under Debian, as I am going to use my server as a glorified wirelessN router...
how to display the modules related to my wifi card, using lsmod all the kernel modules are displayed but I would like to display just the related to my wifi, is there a way to do this?
Because of workers here in my company I need a very secure operating system for laptops so I have chosen Debian 7.8. The laptop is Acer Aspire E11 (E3-112-C4NE). This laptop has a built-in wifi card Aetheros AR9565 :
Basically the stable 7.8 distribution cannot handle this wifi card, so I read on forums that I should upgrade my operating system. So I did as I read on the forum:
After this the oprating system recognized the wifi card and loaded the "ath9k" driver. In the Grub the default operating system became :
Linux 3.16.0-0.bpo.4-686-pae
Because I want to restric the workers to access anything else except the designed inner network, I have uninstalled the Network Manager and set the network interfaces in the "/etc/network/interfaces" file as shown below:
# This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface
auto lo iface lo inet loopback
[Code] ....
This works, when the operating system boots, it automatically connects to my hidden SSID wiofi network. I can ping other computers on the same IP subnet (10.139.252.xxx).
This computer should connect to an XP running under virtualbox, having the IP address of 10.40.138.153. But it does not. On another laptop, running Ubuntu 14.05, having the same network configuration, (10.139.252.102) connects to the same XP under virtualbox with no problem....
For Ubuntu nothing is required to be installed on virtualbox, no extension pack, no guest addition, nothing. When I want to connect to XP via rdp, it asks for username and password and after that only a blue or black blank screen and nothing else... Even on the XP I see no sign of any activity that somebody would like to connect.
Checking the network traffic (tcpdump, nast) I see that the two computers are communicating but after a while the communication stops. The rdp XP its in another IP subnet, but Ubuntu can connect without any problem, Debian not...
I've been using Ubuntu and Mint for a few years now, and I want to try Linux on my HP Stream7 Tablet. I was very excited to learn that Debian 8.0 and later has support for 32 bit UEFI on 64 bit Processors and went ahead and installed the multiarch version of 8.2. It works, but I have no GUI (Just a command line) and no WIFI connection. It seems the GUI didn't install and the WiFi card is not supported. I have found a driver for the wifi card but don't know how to install this driver. URL....
get WIFI working on my Dell D600 with Ubuntu 11.04 freshly installed. I some limited sucched following the this post t=1621331 this got the card working but it was very very slow over 70% packet loss to the WIFIrouter. 1. Machine details Dell Latitude D6002 Wireless Broadband and Chip setlspci -nn | grep Broadcom - 02:03.0 Network controller [0280]: Broadcom Corporation BCM4309 802.11a/b/g [14e4:4324] (rev 02)3. Check interfaces
eth0 Link encap:Ethernet HWaddr 00:0b:db:e0:1c:5b UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
As a part of my final project,i am beginner and this is the first one that i have the opportunity to work under linux fedora,my task consist to develop with C a driver of wifi by using the SDIO Wifi card as an interface. This driver will be included in a digital receiver TV.
I cant get wifi working on my laptop anyone have any ideas or can you poingt me in the right direction, also anyone know if hdmi is supported in debian
I just installed Debian only to be confronted with a problem. My wireless internet won't work. If I click the internet thing, under "Wireless Connections" it says "device not managed", btw my internet works and it did when I had Ubuntu, so nothing wrong in that department.
I have an old Dell Latitude D630 laptop that i have just installed Jessie on. So far I am unable to get the WiFi working. I have followed a guide to add the backports repository but when i try to install the firmware i am told that there is no installation candidate.
In a hp pavilion 15 Notebook PC with Debian 8.1.After two hours or so wifi stops working. Network-manager does not give any indication of failure but some times a yellow question mark.
rfkill list wifi gives: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no ifconfig gives: eth0 Link encap:Ethernet HWaddr 8c:dc:d4:7b:c2:0e UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:3994 errors:0 dropped:0 overruns:0 frame:0 TX packets:3661 errors:0 dropped:0 overruns:0 carrier:0
I am new to linux and decided to use Debian. I installed it on my laptop and have a few problems.First one is my WIFI.
Laptop type: HP Omen 15 Wifi adapter: Intel Wireless 7260n rfkill list output:0: hci0: Bluetooth Soft blocked: yes Hard blocked: no So wifi is not displaying Kernel: 3.16.0-4-amd64 Debian version: 8.4 gui: LXDE URL....
But they see in rfkill list the adapter.How to make this adapter work?I did this with no result:
nano /etc/modprobe.d/blacklist.conf in file add: #Fixing a bug that prevents wifi from working on HP Omen blacklist acer_wmi
I would like to learn more about Linux, but before experimenting I need a working system. The plan for me is to run this as my native machine with vms on top of it with other OS.
I am running (K)Ubuntu Lucid 10.04 64bit on a Dell Latitude E6400, WiFi Card Intel 5100. Never had any problems with networking. Up to about 2 weeks ago. I do realize there have been quite a few posts with this network adaptor, but non really described the problem I have here.
What happens is that suddenly the WiFi LED on the computer stops blinking, the WiFi connection gets disrupted, and the device is not recognized anymore when checking ifconfig. Only cold restarting the machine helps then... it will work for a while (between 1 and 20 minutes) and then crash again.
On Windows 7 the card works perfectly fine. With Ubuntu 11.04 in Live CD mode I have the same effects (connection crashes after a while). Also tried booting an older kernel, no success.
My exact hardware:
Code:
I notived the following problems in /var/log/kern.log
I just installed the lastest stable Debian (gnome) today and what I was most afraid just happened: my laptop's wifi isn't working properly, it isn't turning on. This had already hapened on livecd.
In the laptop's chassis leds, the wifi led apears as green. When I click to turn on the wifi, as shown on the picture the button, quickly disappears and appears again not seeming to have any effect at all at turning on the wifi but not showing any error either!
Picture :
What's interesting about the wifi not working is that in the installation process I was able to connect to a wifi hotspot and it connected to the internet fine!
Now after installation was complete and my system did the reboot, I was no longer able to connect to the internet using wifi.
My wireless card is Atheros AR9565 and my LAN card is also Atheros.
Here is an output of lspci and lsmod which may have some leads about the problem.
I manage to install debian on my flex 10 (lenovo), but now internet is not working, i can see the network, but even being able to connect to them i can't access the net...
