Ubuntu Networking :: Edimax WiFi Card Not Working With Karmic
Jan 7, 2010
Finally took the plunge and upgraded my ubuntu studio to karmic from jaunty. I seem to be experiencing a problem many have, being that my wifi card (edimax) which worked on my previous distro is now not working at all. I've done a lot of research and found the problem seems to mainly be with broadcom cards, and have tried a number of things relating to those that have worked for others, with no luck.
My problem seems to be not that the drivers wont activate or anything like that, my problem is that under hardware drivers nothing appears at all. I have no drivers present, where most people are talking of 3. i have not found anyone else with this problem. My problem is compounded in addition by not being about to use a wire connection at all.
View 3 Replies
ADVERTISEMENT
Aug 15, 2011
I have just installed an Edimax EW-7612PIn PCI-E Wifi card which has an RTL8192SE chipset. This chipset is not supported under current F15 kernels so I have installed the driver and firmware from source and have that working fine. The driver can see the card and I can issue 'iwconfig' commands successfully enough to see my Wifi network.
The problem I have is that I don't understand the relationship between iwconfig and wpa_supplicatant and as I'm running a headless F15 server I cannot use the NetworkManager GUI to help me. I should also note that the Wifi network is using WPA2-Personal encryption.
This is what I have done:
Configured /etc/sysconfig/network-scripts/ifcfg-wlan0 with what I think are reasonable values (based on google searches), including the ESSID, TYPE as Wireless, etc.
Configured /etc/wpa_supplicant/wpa_supplicant.conf, including using the key value returned from wpa_passphrase.
Arranged for wpa_supplicant to run from boot, using chkconfig.
However when I run 'ifconfig wlan0 up' I get the error message 'link is not ready' and indeed looking at the output from 'iwconfig wlan0' there are no configured values. I also understand that some values are configured by iwconfig and others by wpa_supplicant, however it's not clear what.
How do I permanently set iwconfig values?
How do I configure wpa_supplicant?
View 3 Replies
View Related
Mar 28, 2011
I bought a wireless card as stated because it said Linux compatible on it.
I found out on another blog that I needed to blacklist the following:
blacklist rt2x00usb
blacklist rt2x00lib
blacklist rt2800usb
Since then the wireless on my Ubuntu finds a couple of networks, amongst them my wireless network that I am trying to connect. When I enter the Password (which I enter correctly btw) then it tries to connect, but then stops after about 30 seconds.
View 3 Replies
View Related
Apr 15, 2011
Is the open source wifi rt2x00 driver in the Debian kernel? I tried to install Debian for the last 2 years, It never detects my edimax card ew-7128g, Can't use something without wifi or internet support, it does not detect during the install. Nor when i am on the desktop.
View 1 Replies
View Related
May 27, 2011
i am trying to install device driver for my usb wireless adapter "Edimax" . i have figured it out that it recognized by device but when i submit command lshw it doesnt show configuration driver for wireless usb. i have drivers for it in the vendor cd as "driver for linux" but i dont know how to install it
View 1 Replies
View Related
Jan 25, 2010
After purchasing few wifi-usb-dongles for my jaunty and lost many hours, i had no success in bringing them to operate as master or ad-hoc.The devices were Belkin, Level1, and a TP-Link 620 Though the Belkin could work as ad-hoc, but very often disconnects due to buffers issue (though I couldn't build the zd1211b driver for jaunty and it seems that no one can really help with that).
Now I would like to consult with you ahead regarding new potential devices, whether you know it operates as master mode or ad-hoc mode under jaunty (9.04)?
My concerns are regarding:
1. Edimax EW-7318UG
2. Edimax EW-7318USg
3. Edimax EW-7711UMN
4. Edimax EW-7711UTN
5. Edimax EW-7311USN
6. Edimax EW-7717 nMax
7. Edimax EW-7718 nMax
[URL]..
View 1 Replies
View Related
Oct 22, 2010
I have Maverick Meerkat running perfectly on my laptop and have loaded as dual boot onto my old XP pc as well, I'm quite a newbie and working my way through Ubuntu for Non Geeks.
Problem - apparently this PCI card - Edimax wireless N PCI 7727in card is supposed to work out of the box, it came with the Ralink drivers for Ubuntu RT2860.
the network manager finds the homehub and tries to connect but just continually tries and never actually does it, the card works fine with XP so i know it's not faulty.
if it was a driver fault would the card be working at all? would it try to find the network manager?
I bought this card as previously i was using a Dlink DWA-140 and gave up trying to make it work, this card is advertised as Linux compatible in the Ubuntu forums list and on the card.
View 3 Replies
View Related
Jan 17, 2010
i was wondering how to get the above wifi card working as it is not supported.
View 1 Replies
View Related
Feb 1, 2011
i m using backtrack 4 in vmware.i want to use my laptop in built wireless card to search for the near by wifi access point which it is not doing,, my wifi card is " Intel(R) PRO/Wireless 3945ABG Network Connection"
View 1 Replies
View Related
Mar 15, 2011
I can't find a working driver for this card. Notice that I use 64bit ubuntu.
1. desktop
2. lspci -nn
03:07.0 Network controller [0280]: RaLink Device [1814:3060]
3. iwconfig wlan0
wlan0 IEEE 802.11bgn ESSIDff/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
[code]....
View 1 Replies
View Related
Jun 25, 2010
I am currently using Ubuntu 10.04 Lucid Lynx. Although it has worked fine for the past couple of weeks, I have recently encountered a problem with my wireless card. It is an Atheros AR928X card on a Toshiba satellite U405D-S2874 model laptop. Recently, I attempted to put the computer into suspend mode for the first time. The computer failed to wake up, and I performed a hard reboot. After this, everything seems to work except for the wireless card. I am now unable to connect to any wireless network with my laptop, and the wireless manager doesn't seem to be working either.
View 2 Replies
View Related
Feb 24, 2010
I am using a Fujitsu Amilo pi3560 with a Realtek rtl8172 wireless card, and running the latest driver (rtl8192se_linux_2.6.0014.0115.2010). The OS is Ubuntu 9.10.
Everything runs perfectly - when my laptop is connected with the power cord. But when I go battery the wireless disconnects after a few minutes. It then asks for the wpa password, searches for the router, asks again, and so on indefinitely, until I reboot and it all replays once more.
View 2 Replies
View Related
Sep 7, 2011
I installed Fedora 15 64 bits version on my desktop, and I'm having hardtime activating my wireless card.
I tried following the instructions from this thread without success [url]
Here are the logs of some of the commands I used
lspci output
Code:
iwcconfig
Code:
Code:
View 1 Replies
View Related
Dec 14, 2010
I'm dual booting windows 7 64 bit and Ubuntu 10.1 64 bit on my Dell Inspiron 11z with an embedded WiMAX/WiFi Link 6050 series wireless card made from Intel. I only use it for wifi, not 3g or wimax. I installed the latest driver from intellinuxwireless.org, iwlwifi-6050-ucode-41.28.5.1, but it still doesn't seem to work. I ran these terminal commands from another thread:
cd Desktop/wlwifi-6050-ucode-9.201.4.1
sudo cp iwlwifi-6050-4.ucode /lib/firmware
sudo chmod 644 /lib/firmware/iwlwifi*
[code]....
After running "sudo rmmod -f iwlagn sudo modprobe iwlagn", I get this read out for my wireless card.
*-network DISABLED
description: Wireless interface
product: WiMAX/WiFi Link 6050 Series
vendor: Intel Corporation
[code]....
In the ubuntu help section it tells me to flip a manual wifi switch to enable it, but pressing my windows wifi button, F2, doesn't appear to do anything while in ubuntu. The only experience I have working with linux is typing some terminal commands on my android phone to root it.
View 9 Replies
View Related
Feb 17, 2009
I have just installed Fedora 10 on a Dell Inspiron 530. I was delighted to see on the very first boot into the system that my Edimax RT73 USB stick was recognised by the system as it was offering a selection of wireless networks to connect to. But oddly, my own network wasn't listed there. I created a new network and entered the network id manually. Once it was in the list, I checked the radio button and saw a message that I am connected to my network. But after a few seconds the network icon disappeared.
I rebooted the system and again went through the same process with the icon disappearing.
I have an Edimax wireless access point with DHCP enabled. The security is WPA2 Personal with AES.
Vista is also dual booting on the same machine and working fine.
View 6 Replies
View Related
Sep 5, 2010
Just installed Ubuntu Studio 10.04 and everything seems to be working nicely except I have no networking.
The card does not appear in the Network Settings GUI. The only 3 tabs I have are General, DNS, and Hosts.
A screen grab is attached.
I'm a long time Windows user trying out some of the best Linux creative apps I can find. So, Ubuntu Studio was a no brainer. I checked the manufacturer's site for linux drivers and they are available, but I don't know how current. (Edimax site, not RaLink's site.) I opened the file and it looks like it needs to be compiled and installed to work. Something I know almost nothing about. The card is listed as supported in this forum for Ubuntu 9x but I can't find information about it for 10.04
PS. I have no networking on the system but I can transfer files via USB flash drives if needed.
Some System info:
Code:
1 ) Machine Brand and Model (PC/Laptop): Dell Precision 650
2 ) Wireless Brand, Model and Wireless Chipset: 03:0c.0 Network controller: RaLink RT2561/RT61 802.11g PCI
3 ) check interface: robert@ubuntu:~$ ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
[Code].....
View 1 Replies
View Related
Jan 23, 2010
I just installed ubuntu 9.10 on my hp pavilion dv2110rs and everything worked fine but the wireless card. i cant figure out what is wrong. when i type lspci into the terminal it tells me "01:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01)" and i have no idea where to go from here to install a working driver. i tryed to go by the ubuntu guide but i got complettly lost.
View 4 Replies
View Related
Feb 23, 2010
i had an old Dell collecting dust and i've wanted to dive into Linux so i bought a wireless card for it. It's an Edimax EW-7128G, the reason i bought it is because there were multiple positive reviews on how well it works in linux. Ok, so i don't know linux at all. I installed Ubuntu to learn. I installed the card and as far i can see it's not working. It came with a disc with linux drivers yet i don't know how to go about using them.
View 7 Replies
View Related
Sep 16, 2010
I cant seam to find out how to get my card to work i cant find out how to install the driver or finding the wifi card on the system.
View 9 Replies
View Related
May 12, 2011
get WIFI working on my Dell D600 with Ubuntu 11.04 freshly installed. I some limited sucched following the this post t=1621331 this got the card working but it was very very slow over 70% packet loss to the WIFIrouter. 1. Machine details Dell Latitude D6002 Wireless Broadband and Chip setlspci -nn | grep Broadcom - 02:03.0 Network controller [0280]: Broadcom Corporation BCM4309 802.11a/b/g [14e4:4324] (rev 02)3. Check interfaces
eth0 Link encap:Ethernet HWaddr 00:0b:db:e0:1c:5b
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[code]...
View 5 Replies
View Related
May 4, 2011
I am running (K)Ubuntu Lucid 10.04 64bit on a Dell Latitude E6400, WiFi Card Intel 5100. Never had any problems with networking. Up to about 2 weeks ago. I do realize there have been quite a few posts with this network adaptor, but non really described the problem I have here.
What happens is that suddenly the WiFi LED on the computer stops blinking, the WiFi connection gets disrupted, and the device is not recognized anymore when checking ifconfig. Only cold restarting the machine helps then... it will work for a while (between 1 and 20 minutes) and then crash again.
On Windows 7 the card works perfectly fine. With Ubuntu 11.04 in Live CD mode I have the same effects (connection crashes after a while). Also tried booting an older kernel, no success.
My exact hardware:
Code:
I notived the following problems in /var/log/kern.log
Code:
View 4 Replies
View Related
Mar 14, 2011
which chipsets are on the PCi and PCie cards, EW7722in and EW-7612PIn, and whether they can be made to run on a linux system. My system is recent (Linux home 2.6.37.2-0.6-default kernel) Do they have the same chipset as EW-7711In, which I notice has explicit linux support? Now this was on the 3/03/2011, and I had given up getting any kind of useful support, but I got a reply today. I hope they wont mind if I quote them:
[Code]...
View 4 Replies
View Related
Feb 23, 2011
I am planning to buy wifi NIC, and I would like to have it very compatible with Linux systems and also aircrack-ng apps.
Seemingly best choice for me is Edimax EW-7711In, which should have Ralink RT3062 chipset (source - WikiDevi.com), which has official drivers for Linux (source - Ralinktech.com). Also, Edimax website provides drivers for Linux (name of file contains RT3062, so I consider chipset verified).
My question is, does anybody have this card? Can you confirm it's functionality under Linux? Are you satisfied with your choice? Anyone with same chipset?
Note: Not meant to be advertisement. I haven't ever bought any card from them, neither bought any PCI wifi NIC.
View 6 Replies
View Related
Feb 8, 2010
I have Karmic Koala 9.10 working (near) perfectly on my iMac7,1, as identified by
Code:
NOTE: See below for Lucid 10.04 update to these instructions
IMPORTANT: You need to complete the installation procedure while connected to internet via the WIRED network. Then you can enable the wireless by installing the restricted drivers, after the install is complete. Also the fglrx ATI Video driver is effortlessly installed via Menu > System > Administration > Hardware Drivers
The sound card gave me some trouble, as it is an Intel HDA Model, reported as 'Codec: Realtek ALC889A' by
Code:
It shows up in lspci as:
Code:
It sounded rather tinny at first, when I tried mbp3 and other model names. Then I added the following line to /etc/modprobe.d/alsa-base.conf :
Code:
After reboot, my sound is full and can be put much louder than before. Jack detection works. Some people might have to leave out the power saving options. See below.
dmesg reports:
Code:
Sources consulted are mostly the kernel documentation ( Enter into the terminal: sudo apt-get install linux-doc
The relevant info can be found in HD-Audio-Models.txt.gz and HD-Audio.txt.gz in /usr/share/doc/linux-doc/sound/alsa )
View 1 Replies
View Related
Dec 6, 2014
I have some problems with my WiFi card I'm configuring for Debian Wheezy. I've used it in other computers successfully (It's a USB device), but this box doesn't seem to be able to recognize it or use it properly.
I've identified the card using Code: Select alllsusb with the output Code: Select allBus 001 Device 002: ID 7392:7811 Edimax Technology Co., Ltd EW-7811Un 802.11n Wireless Adapter [Realtek RTL8188CUS]
I've used the Wheezy docs to download the firmware necessary and it apparently is supposed to run fine with this firmware, but nothing is working. There was mention to a GitHub repository of a fixed version of the driver in question, which didn't work either.
View 2 Replies
View Related
Jan 20, 2011
With my Compaq CQ62 it seems I can either have a distro provide a working wifi or a working soundcard but not both. I would love to have Linux working properly. Wireless internet works great in Windows 7. The ethernet works perfectly when I plug directly into my router, but pressing the wireless button will not change the light on it from orange to white or do anything else. Yet a simple distro like crunchbang or kubuntu seems to make the wireless work fine.
They just cant make my soundcard work. Being that there is at least some sort of a protocol for installing wireless drivers, I figured I would go with the distro that gives me SOUND since installing a sound driver seems unheard of or impossible. I have a realtek wireless network card in my laptop that Fedora, one of the biggest names in Linux, seems oblivious to even recognize. When I click on the network icon and go to Manage Connections, the Wireless tab is greyed out and cannot be clicked on.
View 14 Replies
View Related
Oct 7, 2010
I have an IBM ThinkPad W700 running 64 bit Ubuntu 9.10 Karmic Koala. At the office I normally connect it to the Ethernet since it's never connected very reliably to the wifi there (drops out 2 or 3 times per day, usually at the worst possible time, of course), but it always worked just fine with Netgear WGR614v5 at home... until a week or two ago.
I used to be able to come home, take the laptop out of suspend mode, and it would connect to the wifi. Occasionally there'd be some hitch and I'd have to restart the network manager (sudo /etc/init.d/network-manager restart) but this was only sometimes, and when I did, it'd always work. But now, when I get home from work, I need to restart the entire system to get it to connect properly again. Without restarting the whole system, it either doesn't scan for wifi networks, it doesn't find any wifi networks, it keeps stuffing up my wifi password, or it connects and gets 0% signal.
Presumably, some driver was updated recently and it doesn't work so well. What's the easiest way to find out what drivers have been updated lately, and revert to a previous version? And what else can I try restarting so I don't have to restart the entire system? I've tried /etc/init.d/network-manager restart, /etc/init.d/networking restart, /etc/init.d/network-interface restart, and restart network-manager. I've also tried turning the wireless switch at the front of the laptop off and on, many times.
Code:
$ lspci -nn
[...]
03:00.0 Network controller [0280]: Intel Corporation Wireless Wifi Link 5300 [8086:4236]
[...]
$ ifconfig wlan0
[Code]...
The info above is when I've taken my laptop out of suspend mode and it won't connect to the network. lsmod doesn't say anything about wifi nor wireless; iwlist does see my network, which my older Januty laptop is connected to without drama.
View 1 Replies
View Related
Jun 11, 2010
By upgrading to latest kernel(2.6.31-22) the card was recognized but it still doesn't quite work. I'm not that good at this but I'll paste some stuff that I think is related to solving a problem such as this.
[code]...
View 1 Replies
View Related
Jan 22, 2010
Ubuntu 9.04 running on a Dell C640 with a Dell TrueMobile 1150 wireless card. Works perfectly under XP. Ubuntu can't find it. Wired networking finds the internet perfectly (though I'm still working on getting samba set up correctly for file/print sharing on my XP LAN).
I'm thinking I need a driver, maybe? Can't seem to locate one.
View 9 Replies
View Related
Jul 13, 2010
i just thought the last few days about trying Ubuntu. so i did. i got a nice and fresh copy of Ubuntu Desktop version and installed it, everything worked great except my wireless usb 2.0 card. the only internet connection i have under windows is Wifi and i hoped that my dongle will be recognized by Ubuntu automatically...(naturally, it wasn't the case.)
so my adapter looks exactly like this one here, except for the color, it's white and it has my WISP's name written on it (i got it from them, along with a cd that offers win xp/98/me drivers...)
so even everest sees it's atheros and it's the Atheros AR5523 chipset.
i also have windows 7 64bit drivers if they help...
anyway, i can't get it to work and cannot access the internet any other way when on Ubuntu, so i have to use an already-saved driver..
View 3 Replies
View Related
