Debian :: NVidia Driver Install - GCC Kernel Not Matching Current Compiler
Aug 4, 2010
I am fairly new to Linux. My machine is running Debian 5.0.5 with gcc version 4.3. When I try to install the Nvidia QuadroFX 3450 driver I got from the Nvidia web site I get an error saying:
"The compiler used to compile the kernel (gcc 4.1) does not exactly match the current compiler (gcc 4.3)....."
Does this mean my gcc version is too new for the driver? if so, how do I roll back to a older version?
Currently using Nvidia driver version 195.36.31, it's the version that works with Nvidia-kernel-dkms, would updating Nvidia driver to the current 275.09.07 driver version break my setup?
After upgrading kernel package to 2.6.32-5 NVIDIA installation gave me ERROR:Unable to load the kernel module 'nvidia.ko'. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from obtaining ownership of the NVIDIA graphics device(s), or NVIDIA GPU installed in this system is not supported by this NVIDIA Linux graphics driver release.
I've built a new kernel (2.6.34) on our workstation at work. It boots and runs beautifully, but there is one minor problem. I created the kernel as a Debian package along with the kernel headers. Upon installing both and attempting to build the nVidia driver for said kernel, the installer tells me that it cannot determine the version and quits. This happens even if I manually specify the path to the headers. What's going on here, did I miss something during my compilation of the new kernel?
I installed the latest kernel liquorix (2.6.35) but when i want to install the Nvidia driver downloaded on the Nvidia website (256.53), i have an error message because Nvidia doesn't found the kernel source tree.
I install linux-image-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb, linux-headers-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb and build-essential. I don't understand why the installation doesn't works.
I'm encountering a problem running X and Gnome from a Xen-enabled Kernel with NVIDIA Binary driver compiled with IGNORE_XEN_PRESENCE=y on debian squeeze
Hardware: NVIDIA NVS 5100M Kernel: Debian Squeeze : 2.6.32-5-xen-amd64 NVIDIA Kernel from the official package
Boot and module loading are successful, but when X starts, I only get a black screen. I attached here my Xorg.0.log, however it doesn't seems to have any problem.
I've posted here before (viewtopic.php?f=5&t=66322) about problems arising from my attempts to get an nVidia driver to work with my custom kernel. Now those problems are all fixed, and I'm back to where I was: the built kernel boots fine, but the nVidia driver fails.
The custom kernel is as near to the stock one as I can make it, I'm just trying to find a working build process at present, before trying to build a later-version kernel.
I used sgfxi with "-! 40" to build the nVidia driver for my custom kernel; it reported that everything was fine.
With stock kernel - 2.6.32-5-amd64 ...
Extracts from /var/log/Xorg.0.log: X.Org X Server 1.7.7 Release Date: 2010-05-04 X Protocol Version 11, Revision 0 code....
i installed the new beta 10.04 and it seemed right after the install and update that both nvidia hardware drivers were automatically install together. i deactivated both drivers. one driver showed the nvidia 173 driver and the other one showed "current" nvidia driver.
after a restart i then tried to activate the 173 driver. system required a restart. so i did. system booted to a black screen. i believe its at the desktop but i am unable to see it. i tried to hit esc at the boot screen to enter the grub menu but that didnt work.
I would like to install above mentioned driver. I need to prepare kernel for this instalation, but this information I didnt find on openSUSE pages. I add openSUSE 11.3 KDE
I've been trying to install the latest driver NVIDIA-Linux-x86_64-256.35.run. I do ctrl+alt+f1 and login, then sudo sh ./NVIDIA-Linux-x86_64-256.35.run and it gives me the license agreement, but after I accept and right after it gets to 100% it says it can't install the kernel or access or whatever. Has anyone done this installation and had the same problem but figured it out??
In order to configure a dual display in a fresh 11.4 installation, I am attempting to install the nVidia driver according to the instructions in SDB:NVIDIA the hard way - openSUSE. I have not previously compiled or configured a kernel so I largely followed the instructions from OpenSUSE 11.2 - How to compile a Kernel for Newbies.The currently installed kernel is 2.6.37.1-1.2-desktop. The graphics card is an ASUS EN9600GSO (512MB).
In Yast, I installed gcc, make, kernel-devel (v. 2.6.37.1-1.2) and kernel-desktop-devel (v. 2.6.37.1-1.2). Per the "hard way" instructions, I did not install kernel-source.
install debian 6 on my pc and have big problem with videoadapter driver i cannot install driver i dowload driver from nvidia do something in google but nothing! palit gtx 460 linux debian 6 x64.
So after getting around the Fakeraid bug, and the grub bug, and all the other bugs killing my system fixed and then i moved on to install my video driver. There was nothing in Administration>Hardware Drivers, so i downloaded the latest driver for my two 8600m gt cards. Did the whole ctrl+alt+f2 and then stopping xserver and then running the driver install only to run into yet another damn bug(see log below)
I have tried fixing it by doing what other threads have said to do e.g:[URL] still nothing. Below is the Nvidia log.
When trying to install the nvidia graphics driver I get the following error-message:
ERROR: The kernel header file '/usr/src/linux/include/linux/version.h' does not exist. The most likely reason for this is that the kernel source files in '/usr/src/linux' have not been configured. How do I configure the kernel source files?
The rest of the message is " located in /lib/modules/2.6.24-16-server/build". The version is Ubuntu server 8.04. Why can't it, and how can I help it along?
my laptop is ASUS U41JF with Intel Core i3-380M and nVIDIA GeForce GT 425M, everything on my Slackware64-current is fine except the video driver.I have tried both ways:1. Packages from Slackbuild(260.19.29)2. Driver from nvidia offical website(260.19.36)Both methods fails because the screen turns black when I set nvidia driver in xorg.conf ans start X. The laptop even stops responding with the second method.The followings are my xorg.conf and log of XorgQuote:
I just installed Natty. Installed nvidia-current via synaptic. Then uninstalled nouveau via synaptic also. Back to Unity desktop, I chose Additional Drivers and activated "nvidia-current". However, after reboot, the info window says this driver is activated but not in use.
After a failed upgrade from 10.10, I went for a complete reinstall. What I'm seeing is that when I install the nvidia-current driver x / gdm doesn't seem to load. I get a blank screen for a bit, then it drops to the last lines in the terminal from loading up. I can ctr-alt-f1 to get to the first tty.
What I'm seeing in my .xsession-errors file is: Code: Xlib: extension "GLX" missing on display ":1". What I'm seeing in my Xorg.0.log is
Code: [17.511] (EE) NVIDIA(GPU-1): Failed to initialize the NVIDIA GPU at PCI:4:0:0. Please [17.511] (EE) NVIDIA(GPU-1): check your system's kernel log for additional error [17.511] (EE) NVIDIA(GPU-1): messages and refer to Chapter 8: Common Problems in the [17.511] (EE) NVIDIA(GPU-1): README for additional information. [17.511] (EE) NVIDIA(GPU-1): Failed to initialize the NVIDIA graphics device! [17.511]
Backtrace: [17.511] 0: /usr/bin/X (xorg_backtrace+0x3b) [0x80eab1b] [17.511] 1: /usr/bin/X (0x8048000+0x5fac8) [0x80a7ac8] [17.511] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0x44940c] [17.511] Segmentation fault at address (nil) [17.511] Caught signal 11 (Segmentation fault). Server aborting [17.511] I'm running on an nvidia 295 gtx. On 10.10 with a completed updated system I saw no issues.
my problem is on installing nvidia driver on fc12 32bit but, first of all, as i understood the pae kernel requires more than 4gb of ram,i have a 2.2 ghz cpu with 2 gb ram,but when i run command:uname -r it answers: 2.6.31.5-127.PAE [i have fc12 32 bit] when we try to download linux we have a 32bit edition or 64bit edition,do we have an edition which is only for pae? or when we install for example the 32bit edition on a computer with more than 4gb of ram then the kernel automatically will change to be a pae kernel??
I've often installed Debian Netinstall and added the nVidia driver for my monitors. I just purchased a new PC that has this as part of its description:AMD A4-5000 APU with Radeon(TM) HD Graphics..I have monitors connected to both its analog and digital outputs. Larger distros have enabled a good video driver automatically, but I need to know how to do this for my Debian Netinstall partition. The video performance is horribly slow right now.
I installed latest nvidia driver with SMXI. I have noticed that anything that uses open GL or GLX does not function. Screensavers, games etc. Output from glxinfo as follows
jon@DebSid:~$ glxinfo | grep "direct rendering" X Error of failed request: BadWindow (invalid Window parameter) Major opcode of failed request: 138 (NV-GLX) Minor opcode of failed request: 4 () Resource id in failed request: 0x3800003 Serial number of failed request: 30 Current serial number in output stream: 30 jon@DebSid:~$
Error - "Oh no! Something has gone wrong." and "A problem has occurred and the system can't recover. Please log out and try again."
How to get back to original nouveau driver after failed nvidia driver install?
What probably happened was a wrong nVidia driver install from the repository.. Because never had any problems earlier, but after I installed some nVidia packages, I get this error.
I already tried to remove nvidia driver by # aptitude purge nvidia-kernel-dkms nvidia-glx It was successful.
Then I reinstalled Xorg Nouveau driver and all its denpendencies by # aptitude install xserver-xorg-video-nouveau It was also successful.
I have a video card. But I cannnot install nvidia driver because of some errors.
My video card's info is GeForce GTX760 1.5GB GDDR5. Code: Select all$nvidia-detect Detected NVIDIA GPUs: 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:118e] (rev a1) Uh oh. Your card is not supported by any driver version up to 304.125. A newer driver may add support for your card. Newer driver releases may be available in backports.
install the driver for my GeForce GT 220. I'm using the latest Debian and here's what happens: I get out of X and run ./NVIDIA... .run. It then says that I lack the cc tool for gcc. If I update gcc, it says that the gcc version used to compile the kernel mismatch my gcc version. If I ignore that error, it says that it can't find my kernel source.
I've been trying to install the latest NVIDIA driver for my 7800GS card. dl the driver from NVIDIA. ctrl+alt+F1. stop gdm3, after I hit agree I get an error. The CC version check failed: The compiler used to compile the kernel (gcc4.3) dows not match the current compiler (gcc4.4). The Linux 2.6 kernel module loader rejects kernel module built with a..
I am running Debian "Sid" and cannot install the Nvidia driver. When I try to install the driver using Module Assistant it says "Bad luck, the kernel headers for the target kernel version could not be found and you did not specify other valid kernel headers to use." It also says "If the running kernel has been shipped with Debian please install the package linux-headers-2.6.32-trunk-amd64." The kernel I am running is the one currently in Debian "Sid".
I have rtl8187se linux driver, during installation in debian linux it tells that "the kernel is not a generic". How can i install this driver in default debian kernel (without generic)?