install the driver for my GeForce GT 220. I'm using the latest Debian and here's what happens: I get out of X and run ./NVIDIA... .run. It then says that I lack the cc tool for gcc. If I update gcc, it says that the gcc version used to compile the kernel mismatch my gcc version. If I ignore that error, it says that it can't find my kernel source.
View 10 RepliesI've enjoyed accelerated 3d graphics for years with this laptop, but since moving from CentOS 5.3 to FC12 I have had no 3d or opengl working at all.My install seems good. I'm running right now with the 'nvidia' driver in 1920x1200 res with no real problems except the lack of 3d. I have just finished trawling the forums again, coming back to: F12,F11 & F10 Nvidia driver guides [URL] I uninstalled all my nvidia packages, re-installed only "kmod-nvidia xorg-x11-drv-nvidia-libs.i686" and dependencies, ensured 'nvidia' was my selected driver in xorg.conf (using nvidia-config-display disable, then enable), and rebooted, and still no joy. No errors in Xorg.0.log. My 'glx' extension is loaded. 'nouveau' is rdblacklisted. SELinux is disabled. I have 3Gb RAM and so have chosen not to use the PAE kernel or modules.
Code:
[neek@uberneek ~]$ glxinfo
name of display: :0.0
Error: couldn't find RGB GLX visual or fbconfig
[code]....
I tried to install the driver '01:00.0 VGA compatible controller: nVidia Corporation NV35 [GeForce FX 5900] (rev a1)' watching Fedora Solved → Video Solutions → Installing the Drivers as Provided by nVidia "Installing the Drivers as Provided by nVidia" ,and FedoraForum.org > Fedora Support > But I failed.
Error log*********************************************** ********************
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Sat Jan 15 12:52:09 2011
[code]....
I typed "su -l" and telinit 3. But "ERROR: You appear to be running an X server" is written. What I can install this driver as well? or how I can booting up the Fedora 14 in text mode?
I have just installed openSUSE 11.1 64 bit on my system. Subsequently registered to get an auto-update repo and auto-updated until no more updates were offered. Then I first tried YaST to install NVidia drivers from the NVidia repo (added their repo), but sax2 wouldn't recognize them. So I downloaded their 190. (beta) drivers, installed the kernel source code and gcc 4.3. Then I switched to a console (Ctrl+Alt+F1), closed the x server, ran the driver install as described (gcc 4.3 is installed). Installer said that all is fine (I checked the log to be sure). So I ran sax2 -r -m 0=nvidia, but the driver still isn't recognized.
View 6 Replies View RelatedAfter a disk crash I reinstalled openSuSE 11.2 and as always downloaded the latest Nvidia driver for my geforce 8200 graphics.
Unlike all previous cases, this time the driver does not install. The contents of /var/log/nvidia-installer.log are below. The error refers to being unable to to locate version.h
PATH:
Using: nvidia-installer ncurses user interface
ERROR:
tried to install drivers for FX 5500 today, the one that Ubuntu recommended (173) and the current version (260). Both installs failed when it tried to set up python-support. Returned an exit status of "10". I don't know what that means. I could really use some help, because I just installed UT2K4, and without the driver, I can't play it. I'm running the latest release, as noted in the thread title. Dunno if it helps, but it was a clean install, because an alternate iso upgrade failed and mucked up 10.04.
View 3 Replies View RelatedI'm running 10.10 on an amd64 bit desktop which, until recent problems with the screen, had a RadeonX700 256 card.
The diagnosis of that problem was video ram going awol.
I have now purchased a gt220 1G card, plugged it in and as I expected, it only gave me a resolution of 800x600 or400x300, not good for the Flatron L225WS screen that is connected(only has a vga connection).
Looking for a driver and help with the installation, I found [url], with instructions which I tried following.
I ran update manager on the desktop, then followed the link to the nividea drivers at ftp://download.nvidia.com/XFree86/Linux-x86_64/190.42/ which gives several packages.
I had a quick read through the Read Me file, and clicked on the first package to download it, but (and I spotted the clue in the extension - ".run") instead of downloading, it gave me a cl type page.
find a nvidia driver GEFORCE G102M. and my laptop model is ASUS K40IN.
View 4 Replies View Relatedanyone knows a driver for nvidia's GeForce GT 440 1GB card.I have installed the nvidia swat-x/ubuntu-x driver, it works somewhat but the performance is really bad.
View 5 Replies View RelatedMy 4 yr old Dell XPS 400 has a nVidia GeForce 7300 LE card which won't run Unity as is. How do I determine without actually attempting to install 11.04 if there is an updated driver available that will allow this machine to run Unity?
View 1 Replies View RelatedI recently installed Ubuntu 11.04 on my Emachine Er1402-05, Wireless works fine, but not the grahics Emachine Er1402-05 has a nVidia GeForce 8200 graphics card. The problem is that after installation it only support resolution upto 1024x768, while my LCD has native resolution at 1600x900. I have installed the most recent nvidia driver $sudo apt-get install nvidia-current However, I was not able to config it:
$ sudo nvidia-xconfig
sudo: nvidia-xconfig: command not found
I was not able to install the package.
$ sudo apt-get install nvidia-xconfig
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package nvidia-xconfig
[code].......
In Fedora 13 with the kernel version of 2.6.34.7-56.fc13.x86_64, the NVidia driver of the version 256.53 was installed from rpmfusion repository. Everything works fine except for one problem: the brightness cannot be controlled from the power management programs in either KDE or Gnome. In Gnome, the scroll bar of brightness disappears, and, in KDE, the scroll bar cannot be dragged.
Since the computer with Fedora 13 and NVidia driver installed is Dell Studio One 19 (All-in-One computer) which has no hardware buttons to control screen display options at all, there is no other way to adjust the brightness of computer screen. The BIOS of the computer doesn't include an option to adjust screen brightness either. Since screen brightness is set at the maximum level when the computer is turned on, it is not possible to continue using the computer for a continuous period of time due to eyesight protection. Strangely enough, both the Nouveau driver included in xorg-x11-drv-nouveau 0.0.16-8.20100423git13c1043 from Xorg 7.4 and the driver included in the mesa-dri-drivers-experimental 7.8.1 support brightness adjustment without any glitches.
the installation of the driver of the nvidia geforce GTS 250 fails. is it due to CENTOS or Nvidia driver?
#note1
CentOS version: 5.5
#note 2:
in the following "uname -a" output:
Linux localhost.localdomain 2.6.18-194.17.1.el5PAE #1 SMP Wed Sep 29 13:31:51 EDT 2010 i686 i686 i386 GNU/Linux
#note 3:
in the following "/var/log/nvidia-installer.log" content:
[Code]...
I'm running a Geforce FX 5900 Ultra with nvidias 173.14.27 driver. I'm running slackware 13.1 with kernel 2.6.35.5.
I get a horrible slowdown which is noticeable in emulators such as bsnes and kega fusion. I also think it's responsible for other issues that involve zsnes flickering like mad and hanging. Zsnes will actually crash if I select any filter plugins with opengl output modes.
Kega Fusion slows down to a crawl (we're talking 10 fps) immediately before loading a rom. Playing a rom makes it even slower.
Bsnes has the same kinda slowdown as kega fusion (even worse since it's so cpu intensive) when I activate scanlines or any type of output filter with opengl. Otherwise with no filters and just plain opengl it seems to run fast like it should...
Gens-GS doesn't seem to enable any filters in fullscreen mode... They work however in windowed mode with no slowdown issues...
I've compiled and installed SDL 1.3 from hg repository, then recompiled bsnes just to test it with newer SDL. Unfortunately the problem persists even with a newer SDL version which thankfully for me means I can revert to the older stock SDL without having to recompile everything else haha!
It's funny because I thought these issues were related to the emulators and not the video card drivers. I had these issues for a couple years running ubuntu and trying other distros. When I installed Slackware 13.1 I decided to try my Radeon 9700 pro and kega fusion no longer had this slowdown issue! I switched back to my Geforce and installed nvidia's drivers and immediately had slowdown issues... I'm gonna switch back to the radeon card and test the other emulators but otherwise it'd be nice to know if there's a solution to this issue...
Ok I installed my radeon card: nvidia-installer --uninstall, then updated xf86-video-ati from 6.13.0 to 6.13.2. Even though kega fusion runs fine I get even worse problems with everything else! LOL so I'm going back to my geforce card.
How can I find video driver for nvidia geforce 320M graphics card for ubuntu 9.l0?
View 4 Replies View RelatedAfter installing the driver of nvidia GEForce 9800 GT on RHEL5.5 the monitor goes out of range ?? What to do ?
View 5 Replies View RelatedMy graphic output is not that nice. How do I find out what kind of driver Centos is using? Can I fine-tune its performance? I tried to install the driver(NVIDIA-Linux-x86-185.18.36-pkg1) from NVIDIA website but it failed. I got the following log file.
---
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Tue Oct 6 15:33:24 2009
installer version: 1.0.7[code]....
ERROR: You appear to be running an X server; please exit X before installing.For further details, please see the section INSTALLING THE NVIDIA DRIVER in the README available on the Linux driver download page at[url]...
I'm just not able to connect the dots regarding NVidia, audio and HDMI.I have Ubuntu 10.04 installed and updated the ALSA driver to version 1.0.23 using the script posted in another thread on this forum. Although I got a config issue in the process my NVidia HDA device shows up with
xbmc@MediaPortal:/etc/modprobe.d$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: VT1708S Analog [VT1708S Analog]
[code]....
why do I see four NVidia HDMI devices (3,7,8 & 9) in aplay -l, I couldn't find an explanation for this? Next I got smplayer giving audio over HDMI when selecting either of the HDMI devices in the audio config menu, but after a reboot, even if one of them is still selected I need to change and apply before I hear sound. Is Pulse Audio or alsa or some other thing interfering? I just do net get sound working although XBMC lists HDMI for sound output and for passthrough. More precisely I have the options (High Definition Audio Controller Digital Stereo (HDMI), default, custom) for Output Device and (HDA NVidia hdmi and hdmi) for Passthrough of which I tried all combinations.
install debian 6 on my pc and have big problem with videoadapter driver i cannot install driver i dowload driver from nvidia do something in google but nothing! palit gtx 460 linux debian 6 x64.
View 3 Replies View RelatedI have a Macbook Pro which i want to install Opensuse 11.2 64bit(Upgrades to 11.3) The problem is that once i install opensuse and then boot via rEFIt, it loads up till the desktop is supposed to appear. All i get at this stage is darkness with a few coloured shapes in the background (Video driver not loaded).I can however reboot and go in via the failsafe option. Once in here i can use the GUI. I am a total noob with linux, can some one give me the instructions on how to install this driver. Its driving me insane. When i run uname -r, the results are 2.6.33-6-default I have added the following http repository (download.nvidia.com/opensuse/11.2/)
View 3 Replies View Relatedinstalling nvidia driver . i'm useing gnome desk top.
View 9 Replies View RelatedI just did a fresh install of Debian lenny and I'm having an issue with the display driver. The system is defaulting to 1600x1200 and it's not allowing me to change it to a lower resolution. The PC has a Nvidia geForce 7050 display card and the monitor I bought with the machine goes up to 1366x768 resolution. I ran the dpkg-reconfigure xserver-xorg but nothing happens, it's only giving me options to change the keyboard. There is nothing on the xorg.conf for the monitor settings:
Seletion "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Apparently, the install did not picked up the display card automatically. I also looked up the drivers for the adapter and downloaded the nvidia-glx_173.14.09-5_i386.deb file but, don't know how to install it.
I have already installed Debian testing and now looking to install Nvidia drivers version 190.
I had downloaded the Nvidia driver from their site but the way it installed on Ubuntu is not the same here in Debian. Obviously, I failed.
I just tried to install KDE in Debian testing on the machine with Nvidia Geforce 7300 GS using Nvidia driver (280.13-1). However KDE breaks when compositing is enabled, and the only way to make it work is to disable compositing. This problem seems to exist for a while already:[URL].. Is it really Nvidia's problem, or something with KDE? Is there a point in contacting Nvidia about it?
View 4 Replies View RelatedI was following this guide to install my nvidia drivers...[URL] but when I got to the step about checking to see if my card is supported I'm to check here...[URL] I don't see my card anywhere in this list So I kept reading and found this posting ... [URL] and it says that it is support under the geforce 200 ... The last time that I installed this driver my X session quit working ... I was able to ssh back into the laptop and undo the driver install so now i'm a little gun shy about trying it again...
View 11 Replies View RelatedI've often installed Debian Netinstall and added the nVidia driver for my monitors. I just purchased a new PC that has this as part of its description:AMD A4-5000 APU with Radeon(TM) HD Graphics..I have monitors connected to both its analog and digital outputs. Larger distros have enabled a good video driver automatically, but I need to know how to do this for my Debian Netinstall partition. The video performance is horribly slow right now.
View 2 Replies View RelatedHow to install Nvidia 9500 GT with nvidia driver.
View 5 Replies View RelatedI installed latest nvidia driver with SMXI. I have noticed that anything that uses open GL or GLX does not function. Screensavers, games etc. Output from glxinfo as follows
jon@DebSid:~$ glxinfo | grep "direct rendering"
X Error of failed request: BadWindow (invalid Window parameter)
Major opcode of failed request: 138 (NV-GLX)
Minor opcode of failed request: 4 ()
Resource id in failed request: 0x3800003
Serial number of failed request: 30
Current serial number in output stream: 30
jon@DebSid:~$
System as follows,
Intel P4 2.66, generic descktop PC, Nvidia GeForce 7100 GS, Debian Squeeze/Sid
how to install the geforce driver in fedora 14?
View 1 Replies View RelatedFedora Core 8 did not recognize my Geforce 7150M display adapter (in a HP DV6000 laptop), neither did Fedora Core 10 I tried yesterday although this laptop is now already over one year old (I have used Vista because it works out of the box but it sucks as you might have guessed). That could be something I'd like to complain about but I choose not to, I simply want to know how to install Fedora 10 from a live CD (that is all I have now, no DVDs and not too much cash to buy some..) Live CD boots and I can access command line. If I have understood correctly, Nvidia proprietary driver supports my display adapter but it is not included in live cd so I could use X after installation. Problem is that I don't know how to successfully run the installer from text mode. I tried to execute 'anaconda' but it cannot find packages to install when it comes to that. There seem to be no instructions how to install from a live CD that I could find using Google. For sure someone knows what command to execute to begin installation?
View 2 Replies View Related