I've been trying to install the latest NVIDIA driver for my 7800GS card. dl the driver from NVIDIA. ctrl+alt+F1. stop gdm3, after I hit agree I get an error. The CC version check failed: The compiler used to compile the kernel (gcc4.3) dows not match the current compiler (gcc4.4). The Linux 2.6 kernel module loader rejects kernel module built with a..
View 3 Replies
I have a video card. But I cannnot install nvidia driver because of some errors.
My video card's info is GeForce GTX760 1.5GB GDDR5.
Code: Select all$nvidia-detect
Detected NVIDIA GPUs:
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:118e] (rev a1)
Uh oh. Your card is not supported by any driver version up to 304.125.
A newer driver may add support for your card.
Newer driver releases may be available in backports.
[CODE]
I use a debian testing, I can't drive graphics card，open source driving performance is not good, so you need to closed source drive, model is nvidia 7300 gt, how to drive the video card?
View 5 Replies View RelatedI installed Debian Squeeze with no issues. I went to install latest Nvidia driver as done previously with Lenny. Used instructions that worked on lenny from "the trooper" [url]
Downloaded th latest driver for my GeForce 7300 GS vidio card, driver package NVIDIA-Linux-x86-260.19.12.run
Used "method # 2 as described in HOW TO,as it worked perfectly in the past on Lenny. Only syntax I changed was instead of gdm I typed gdm3 as it appears that is the new name for gnome in Squeeze.
Did as folows:
Now the trouble showed up, Unfortunatly I can only go off my memory. A question was asked stating that something did not match, it needed a 3 and the driver had a 4 version or somethng of this sort. then it asked if I new what I was doing (and I lied) and selected yes. And whammo, it didn't work. (This question was asked when i did in Lenny and it is working perfectly still on that system). I now can not boot to GUI, I notice when system boots it starts in "S" mode although I select normal boot from grub2.
Not too bad if I got to reinstall as little is on the system. I just want to know what I am missing on the instalation deal or should I be going about this difrently with Squeeze.
The first thing I do is press ctrl-alt-f1. Then I do this:
Code: sudo su
init 3
./NVIDIA-linux-x86-260.19.12.run Then it comes up with the error that I have X-server running.
I've also tried Code: /etc/init.d/gdm stop but that command wasn't recognised. I've also tried Code: killall -9 X but there are no processes called X
Only about 1.5 weeks into Linux guys so bear with me. I'm trying to uninstall the Nouveau driver and install NVIDIA-Linux-x86-71.86.14-pkg1.run for my old Nvidia TNT2 card. Following these directions I run into a problem in the first step. When I execute the Ctrl+Alt+F1 command and get:
Ubuntu 10.10 splat-desktop tty1 splat-desktop login: if I enter splat which I believe is my username and the correct p/w I get an incorrect login response.
I need to install the nvidia driver on a PC that don't have any nvidia card in it.It's on a PXE server with read-only client's / . Those clients have nvidia cards.When this server had a nvidia card in it, i simply chrooted in the exported / , then i could install this driver.
View 3 Replies View RelatedI have a GTX 980 and the output of
Code: Select alluname -a is Linux MulletDeathPC 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt11-1+deb8u4 (2015-09-19) x86_64 GNU/Linux
I revived my old desktop (failed psu), and installed debian squeeze using netinst. It has a nvidia geForce 7600GT card. The driver in squeeze does not work very well, so I downloaded nvidia driver-installer. When I run it, it comes back with an error saying the kernel (I assume the nvidia graphics kernel) is compiled with gcc4.3, but the system is using gcc4.4. Using synaptic manager, I installed gcc3.3, but same error.
Next I tried to uninstall gcc4.4 and it gave a warning the system might not be usable. I did not understand it, but I went ahead and uninstalled gcc4.4 and guess what, the system is not usable, and I have to re-install squeeze. Not a big loss, since I do not have much in it. How to install this nvidia driver, specifically, how do I get switch to gcc4.3 from gcc4.3? Also, the squeeze install gave me 2.6.33-trunk-amd64, and 2.6.33-3-amd64. How do I get rid of ...trunk-amd64? Do I just delete it from grub?
I am try to install the nvidia 96.43.16 driver for a Gforce 2 MX-400 video card following this [URL].. When I ran the 'rpm -e --nodeps xorg-x11-Mesa-libGL' command the the package wasn't installed.
When I ran modprobe nvidia it wasn't found either.
Being a newbe I had no idea what to do next.
I have managed to work out how to install my NVidia video card driver. I'm just about to tackle getting the
microphone aspect of my sound card in my laptop going. If that goes alright I'd like to install the Wacom drivers for my Cintiq 21ux.
I have sound coming out of my sound card, I just need to put some sound through it (for skype conferences)
Do you where I'd be able to find the right drivers or links to tutoials about or similarto my HP Pavilion dv5 1006tx?It's mainly the sound card and Wacom Cintiq 21ux I'm worried about.
install debian 6 on my pc and have big problem with videoadapter driver i cannot install driver i dowload driver from nvidia do something in google but nothing! palit gtx 460 linux debian 6 x64.
View 3 Replies View Related[URL]. I now have both monitor working and noticed my drivers are not current. I have the older ones installed. The 260.19.06 one. I installed via the suggested restricted driver utility in ubuntu 10.10. I don't have full use of the graphics and would like to install the latest driver.
Question:
1. Do I uninstall nouvea and nv drivers (still installed)
2. Do I uninstall the current nvidia driver, then do a manual install of the latest driver from nvidia?
I have spent ages looking at similar problems but not not quite the same. I have installed 11.4/Gnome (x86) and wanted to use my GT430 card. I went here: 'http://en.opensuse.org/SDB:NVIDIA_drivers' and used the 'one click' install for current cards. All went ok until I rebooted and I got a 'gdm[1239]: WARNING: GdmDisplay: display lasted 0.846578 seconds' message. I got five of these in succession until the 'gdm[1239]: WARNING: GdmLocalDisplayFactory: maximum number of X display failures reached: check X server log for errors' appeared and it popped me down to an init 3 login.
So, I deleted the blacklisting conf file so that I could get back in to Gnome on Nouveau (which I did ok). I then noticed there was no /etc/X11 Xorg.conf file so I ran /usr/lib/nvidia-xconfig to generate one (which it did) - but it made no difference. I am at a loss know after spending 8 hours on this. Any pointers would be greatly appreciated. My machine is still at fresh install state so even if I have to reinstall 11.4 it does not matter.
[Code]...
i just instaled bt4 on my hdd and i have a problem with instaling drivers... i cant find and install driver for my video card nvidia 8200 integrated on motherboard. exacly i got the problem with changeing video resolution... i have only 640x480 and 800x600, and here is the problem, i cant put it in 1024x768..
View 6 Replies View RelatedLately (F14 and F15), Nvidia's drivers have been making my system freeze unexpectedly when running X. The only work around I have is reverting to an older driver (173.14.30). Although no freezes occur when using the older one, I need the latest one to run a few games sometimes. The odd thing is that when running these games within Wine while having the latest driver installed prevents the system from its usual freeze. I'd just like to solve this problem so I don't have to consistently revert back and forth from the two. I have a Nvidia Geforce 8800m gts and I am running F15 x86_64.
View 14 Replies View RelatedUsing online Debian guide, installed latest nvidia-current, glx etc which seems to be 195.xx Machine boots to GUI but monitor setting menu doesnt respond nor is there an nvidia specific one. xorg.conf shows 'nvidia' driver but I suspect I am still on 'nouveau' since the synapatic package manager doesn't show an nvidia xserver-xorg-video choice.
Second question, any trailheads for using wheezy based drivers (i.e. nvidia's latest 270.xx) with squeeze?
The freeze's on my machine only appears when i monitor the temperature of
the gpu. Normally i use gkrellm to monitor temperatures including the gpu temperature. When i stop gkrellm there a no more freeze's on my system. Then i started nvdock which also monitor the gpu temperature and the freeze's are back. Stopping nvdock make the system working normally. I have done a few reboots now, warm and also cold starts und everything works normal.
System data: AMD P2 X4 940, Nvidia GTS 250, openSUSE 11.3, Nvidiadriver 256.44,
Gigabyte Mainboard GA-MA78G-DS3H rev.2,8GB RAM, KDE 4.4.95,
I ran the latest updates this week (including the new kernel and the new kmod-nvidia update) and I got a blank screen when I rebooted. (I get the Fedora bar across the bottom of the screen, then after that the screen goes blank) I assume this is when the xorg server is trying to start..
I went into single user mode , backed up and then removed the xorg.conf file but still got a blank screen upon reboot.
I rebooted into single user mode, copied the /var/log/Xorg.0.log file to a safe location, and then restored the system back to its original state.
I've since rsync'd my system back to where it was before the update.
Here's my Xorg.0.log file:
I've manually installed the latest NVIDIA display drivers from the website (newer than the restricted driver package that came with 9.10). When there is a new Linux kernel, or a newer Ubuntu version, will I need to uninstall that driver before upgrading? Will having this driver cause any special installation issues during upgrade (such as the need to reinstall the driver after upgrading)? I am using 9.10 through Wubi.
View 1 Replies View RelatedI seem unable to get an nvidia driver working properly after upgrading to the latest kernel with Fedora 11.Here is my laptop and its specs: http://h10025.www1.hp.com/ewfrf/wc/d...reg_R1002_USEN[URL]I've tried both the kmod and akmod unsuccessfully. Everytime it gives me a black screen on boot, I can fix the problem by popping in the LiveCD, and changing the xorg.conf file back to the backup.Here are the errors/warnings from my boot.log file:
Code:
WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
Checking for module nvidia.ko: [60G[[0;31mFAILED[0;39m]
[code].....
I'm running Ubuntu 10.10 on an old small form factor PC with an AMD Sempron 2400, 1GB RAM, and an nVidia 5200 graphics card 128MB. OK, so a low-spec machine (but that's the great thing about Linux right? Don't need high-end h/w) but it works just fine, except that it can't play full HD (1920x1080) MPEG-4 video. Very jerky and lots of dropped frames. Same in both Movie Player and VLC.
I can't afford to increase the RAM and as it's a SFF I can't just swap the mobo and CPU for something faster so I'm wondering whether getting a higher spec graphics card would make any difference?I'm using the nVidia proprietary binary driver (latest version) and searching the forums I found a post where someone said that the nVidia driver needs at least a 512MB card for HD video.A colleague has a higher spec nVidia card (7600 IIRC) that he'll sell me, but before I spend any money, is this likely to improve things? How much does the graphics card affect performance, or is it simply a case of the machine overall just isn't high enough spec?
I have already installed Debian testing and now looking to install Nvidia drivers version 190.
I had downloaded the Nvidia driver from their site but the way it installed on Ubuntu is not the same here in Debian. Obviously, I failed.
I am thinking to install Debian on my (currently Ubuntu) workstation because of some issues. My questions are:
- Should I use a daily build iso or the Alpha1 iso for Squeeze?
- Which is the best way to install my 8600 nvidia card?
- Is it ok if I use the same password for root and user, since it's a single-user system?
I've often installed Debian Netinstall and added the nVidia driver for my monitors. I just purchased a new PC that has this as part of its description:AMD A4-5000 APU with Radeon(TM) HD Graphics..I have monitors connected to both its analog and digital outputs. Larger distros have enabled a good video driver automatically, but I need to know how to do this for my Debian Netinstall partition. The video performance is horribly slow right now.
View 2 Replies View RelatedHow to install Nvidia 9500 GT with nvidia driver.
View 5 Replies View RelatedI installed latest nvidia driver with SMXI. I have noticed that anything that uses open GL or GLX does not function. Screensavers, games etc. Output from glxinfo as follows
jon@DebSid:~$ glxinfo | grep "direct rendering"
X Error of failed request: BadWindow (invalid Window parameter)
Major opcode of failed request: 138 (NV-GLX)
Minor opcode of failed request: 4 ()
Resource id in failed request: 0x3800003
Serial number of failed request: 30
Current serial number in output stream: 30
jon@DebSid:~$
System as follows,
Intel P4 2.66, generic descktop PC, Nvidia GeForce 7100 GS, Debian Squeeze/Sid
Problem summary:
Error - "Oh no! Something has gone wrong." and "A problem has occurred and the system can't recover. Please log out and try again."
How to get back to original nouveau driver after failed nvidia driver install?
What probably happened was a wrong nVidia driver install from the repository.. Because never had any problems earlier, but after I installed some nVidia packages, I get this error.
I already tried to remove nvidia driver by
# aptitude purge nvidia-kernel-dkms nvidia-glx
It was successful.
Then I reinstalled Xorg Nouveau driver and all its denpendencies by
# aptitude install xserver-xorg-video-nouveau
It was also successful.
But problem still occurs..
install the driver for my GeForce GT 220. I'm using the latest Debian and here's what happens: I get out of X and run ./NVIDIA... .run. It then says that I lack the cc tool for gcc. If I update gcc, it says that the gcc version used to compile the kernel mismatch my gcc version. If I ignore that error, it says that it can't find my kernel source.
View 10 Replies View RelatedAfter upgrading kernel package to 2.6.32-5 NVIDIA installation gave me ERROR:Unable to load the kernel module 'nvidia.ko'. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from obtaining ownership of the NVIDIA graphics device(s), or NVIDIA GPU installed in this system is not supported by this NVIDIA Linux graphics driver release.
Here is /var/log/nvidia-installer.log:
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Tue May 4 11:49:38 2010
installer version: 1.0.7
[code].....
