Debian :: Full Install To USB Hard Drive?
Aug 9, 2010
If this has been covered before I couldn't find it.
What I'm "Not" Asking... I'm not asking about installing the CD image to a USB hard drive to boot a live install version. I've done that to see is my computer will boot from the USB and it does.
What I want to do is this:
An actual hard disk install of full featured Linux to a portable USB Hard Drive. I want to be able to plug in the USB HHD and go Linux. (Why you might ask? Fair enough. The laptop is my wife's computer and she says absolutely no to Linux.
View 3 Replies
ADVERTISEMENT
Jun 12, 2011
I have added no data to my hard drive in the last few days. I saw a notification saying I had only 1.8Gb left on my drive. Shortly after I dismissed it and ran: Code: sudo apt-get clean like the notification suggested. Then, another poped up. Now it said I have 0 bytes left.
So, I opened the disk usage analizer and the data seemed normal, and not my full drive size. It still was saying I have no space so I checked the properties widow for / . It said / contained 128TB of data and the file counter showed no signs of stopping after a few minutes. Obviously my drive is not 128TB in fact it's only 500GB. Also the disk manager program (system volume information?) Said it has 28 bad sectors.
View 4 Replies
View Related
Jun 22, 2011
create a partition seperate from my home directory out of it. i have a 500 gig hard drive and i wish to create a 70 gig partition on it on install i used entire disk is there any way to make a partition after this for i do not want to reinstall.
View 3 Replies
View Related
Jun 22, 2011
if there was a way, to add a folder to a hard disk which was full of symlinks to a CD drive. This would primarily be a way to store offline media and a way to access it. I would still be able to browse the folder structure and see the files (but possibly not the sizes). I imagine something like this:
/archive/cd/cd1/photos/me.jpg > /mnt/cdrom/cd1/photos/me.jpg
Therefore I can see what files I have available, and I know which media to insert (in this case cd1) and I would then be able to view the files? Or if anyone has a better idea I'm open to it. Just to mention I don't have a GUI on this server, it is completely headless so any solution needs to be console based
View 1 Replies
View Related
Nov 13, 2010
Found what takes space but not sure what to delete here is the output of df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 9.2G 157M 8.6G 2% /
/dev/sda5 9.4G 9.4G 20K 100% /usr
/dev/sda6 213G 213G 20K 100% /var
none 1.0G 12K 1.0G 1% /tmp
tmpfs 2.0G 0 2.0G 0% /usr/local/psa/handlers/before-local
How to identify what to delete to clear up space?
View 9 Replies
View Related
Dec 5, 2009
My friend and I were discussing partitioning and we disagreed on repartitioning when the drive was full. How full is too full before partitioning will mess up your file system? I've partitioned before but it was only after the OS was installed, so only about %5 of the drive is being used. I read that 90% or more is too much. My friend claims it doesn't matter, and you can repartition even if the drive is 95%+ full.
View 1 Replies
View Related
Mar 17, 2010
I have a pc with windows on it, about 90% of the hard drive is full. I want to install dual
boot ubuntu with ubuntu using about 70% of the hard drive, do I need to manually create space, or can I just set during the install will ubuntu just over-write that much. I don't care about the files I have under windows.
View 1 Replies
View Related
Jul 13, 2010
I experienced a full hard drive yesterday due to a massive error_log. We took care of the errors, but later found out we were missing files, including a MySQL database table. Having a shopping cart and ecommerce stuff on the site, we found that some of those files were missing, too.Does RHEL 5 have some sort of feature for automatically deleting files when the partition is full? If it does, I want to turn it off.
View 4 Replies
View Related
May 12, 2010
i just burnt a debian lenny 504 live disk. i don't think there's a way to install it to hard drive. i just did a google search and it appears that the latest debian lenny 504 cannot be installed to hard drive with the live cd. from what i have read, i need to get a "netinstall" iso (this is new territory for me). can anyone supply me with a link for an iso with a hash verification? i would be most grateful. the disk i had previously must be corrupted because the install quits at 5%.
View 2 Replies
View Related
Oct 24, 2015
I am trying to install Debian onto an IBM ThinkPad 240X. The 240X will only boot from either an internal IDE hard-drive, or an external floppy-drive. For now, I have decided to ignore the option of using the floppy drive. I have other computers to support the process, an IBM ThinkPad T43p (Pentium M) as well as my primary laptop, a ThinkPad X200s (Core2 Duo). I have tried installing the hard-drive to be used into the T43p, then booting the Debian NetInstall from a USB thumb-drive, installing as usual, then transferring the hard-drive into the 240X. This does not completely work; GRUB and LILO will load, but the computer freezes very early (almost immediately) in the boot process.
Please note, I am trying this on a CF card. The 240X has an IDE-CF adapter, and my X200s has a USB-CF reader.So, I want to try to load the actual Debian Net Install on the 240X. Ideally, it will happen something like this; I will partition the hard-drive into these 2 partitions:
sda1: the Debian Net Installer
sda2: an empty partition waiting to have Debian installed onto it URL...
but the part I do not understand is how to get GRUB or LILO installed onto the CF card. I am wary of running commands such as "grub-install" as I do not want to mess up my GRUB install on the computers this command would be run from. If I run a command such as this, I would want it to ingore everything about the computer it is being run from, and only modify files or install onto the CF card. I would not want it to acknowledge the computer it is being run from as far as available installs, architecture, etc.
View 7 Replies
View Related
Feb 7, 2010
Can you install a live cd onto hard drive? I'm in a live environment now and don't see an install option.
View 10 Replies
View Related
Jun 26, 2015
“toshiba satellite u840w with hard disk drive and a solid state disk cache”
Debian 8 installer does not detect the hard drive during installation
I've recently tried to installed Debian 8. The problem is that the partition menu gives me these 3 options:
1. Configure iSCSI volumes
2. Undo changes to partitions
3. Finish partitioning and write changes to disk
There are no options for defining partitions or any hard drive during installation. After searching the internet i found that the problem because the solid state disk SSD cache. How I install a Debian 8 with computer which has a hard disk drive and a solid state disk cache.
more info: I want windows 7(64) and debian dual boot
View 14 Replies
View Related
Aug 13, 2010
Whenever I'm dealing with large numbers of computers that need to have identical windows installations put on them, I love using Symantec/Norton Ghost to image the NTFS partition (just making the .gho file the size of the disk I've used, instead of the 160/320GB full volume size), and then uploading it automatically to a windows share.I'd love to be able replicate this exact process with Ubuntu. I have one computer that's ready to go, and a few dozen more that I'd like to quickly get that same image on.
I've heard that there's a command called dd that can make disk images, but I'd really like some sort of boot disk that can allow me to make an image, save it, then run the boot disk on another computer to allow me to reconnect to the server and dump that image on that computer. Ghost 4 Linux doesn't have a network/server component, I think.even if such solutions cost money, I'd love to know if they exist or not.
View 2 Replies
View Related
Aug 9, 2011
I would like to build an oem style install partions that is bootable with menu to choose if I want to run install or boot already installed system. I would like to include current source packages on the same dive so if I don't have internet access at time of install, can can still install what I need.I know with Windows Vista and Windows 7, you can get this but how can I do this with Debian?
View 1 Replies
View Related
Apr 4, 2016
I have spend way too much time on this and it still fails. I installed the debian 8.3.0 AMD64 CD1 iso image on an empty external USB 1TB Western digital My passport Ultra. I use the graphical install method and the installation process of Debian appears to go fine, except it informs me at one point I am missing some nonfree firmware for something with wifi, but that shouldn't relate to this.
*FYI I put GRUB on the external hdd, sdb in this case.
*windows 7 is on the internal hard drive and I excluded it from the boot sequence
* using laptop lenovo t410
I reboot my computer and it hangs with a flashing - in the upper right corner. Never even gets to GRUB. For awhile I thought I might have partitioned something wrong, but I am now convinced that isn't likely. I tried countless number of different partition configs. Separate /boot partition and I also tried using guided partitioning.
I mounted the partitions of the external hard drive using another OS and GRUB appears to be there. So it is there.
I know some Western digital hard drives have added priopertary firmware crap, so I tried installing on a external Seagate drive and it still hangs. I tried installing linux mint on the Western Digital drive and it works fine!
BIOS settings fine. USB settings fine. I tried booting via the boot menu and moving the USB HDD to the top of the list.
I also tried installing with Debian Live on a USB, but that actually has more problems for some reason. I can never get passed the partitioning phase because it fails to create /boot or /swap partitions saying something about how they are still in use and another thing about how the partition table hasn't been updated in the kernal yet.
It seems I might be having this same issue, not sure: [URL] ...
View 7 Replies
View Related
Sep 13, 2010
ok I am using Debian 4 bigmem and I set up static ip for my box. This is for a class and we will be moving the hard drives around the lab to different computers. My question is what do I configure to get Debian to be ok with my using different nics at different times.
My first time I used it, I had eth0, but now I'm on a different computer (same type of hardware on all systems) but my nic is now eth1... And I had to set up static again for that nic. How can I have it just maintain a static ip for whatever nic/mac address on the computer that my hard drive happens to be put on?
View 1 Replies
View Related
Dec 9, 2010
I have a single PC that has two hard disks in it. One is 250GB running Debian linux; the other 1TB running windows. I was switching between the two by going to the BIOS and changing the order of the hard disks to boot from. Both lived happily together in peaceful co-existance. Until....
Lately, I haven't been using Linux, so I decided to convert the 250GB to windows. So I put in the windows install CD, and it all started working fine, but when it came down to setting up a partition, Windows only recognized 130GB (out of the 250GB). I got confused so I decided to re-install linux. Linux recognizes the full 250GB; it recognized that there is a second hard disk running a different OS so the grub gave the option to boot from windows. So after a couple of reboots from both drives I decided to go ahead and install windows on the 250GB. Well again, windows only recognized 130GB, but this time, windows showed me another hard disk again with 130GB capacity. Apparently I stupid enough to proceed so now both hard disks - the 250GB and the 1TB - have capacity of 130GB each. And this is where I'm stuck.
I have tried fdisk, I have tried debug, but for some reason, windows can only recognize 130GB out of the entire disks; linux on the other hand recognizes the full capacity. I also used the seagate disk diagnostic tool (seatools for MS DOS) and it found no errors on either hard disk.
How can I reclaim the full capacity under windows?
View 4 Replies
View Related
Apr 26, 2010
I disconnect my internal Windows hard drive first. Then run the installer from the Desktop CD. Everything works great.This is approximately the steps I take: I reboot, everything is good. I reconnect my internal hard drive, boot to Windows, reboot back to Kubuntu, everything is still good. I run updates and follow the instructions of the Comprehensive Multimedia & Video Howto. I reboot again, still no problems. At this point, I figure everything is OK and I have no worries. I boot to Windows and do some work in that environment. The next time I boot to the external Kubuntu hard drive, I get the following errors:
Begin: Starting AppArmor profiles ...
mount: mounting /sys on /root/sys failed: No such file or directory
mount: mounting /dev on /root/dev failed: No such file or directory
[code].....
View 6 Replies
View Related
Jul 31, 2010
This question is somewhat open ended, so I'll describe the specific issue, what I want to accomplish in general, and what I tried to do. It'd be a little long, but hopefully not too daunting.For quite a while my approach to multi-OS boots has been to install each OS to a separate disk. When I want to boot a specific OS I change the boot drive in the BIOS. I find this convenient for several reasons, but mostly because I don't get boot manager conflicts. If I remove a disk or change the OS on it, this doesn't affect the booting of other OS's.
Note that when I say multi-OS, this meant until now multiple versions of Windows. I've occasionally tried some linux distros on VirtualBox, but now I want to do a full install, and see if I can use it as a main OS. (What prompted this was the recent release of Wine 1.2 and the fact that my new job doesn't involve any Direct3D or DDI work. I've always been partial to the open source movement, but I'm also fine with Windows and never before felt I could make the move without losing key abilities). My plan was (still is, if I can get it to work) to use Linux for everyday e-mail, web browsing and such, play Windows games over Wine, and install Windows 7 in VirtualBox for Windows development.I currently have two disks, one with my main Vista x64 installation, and the other with a Vista x86 installation which I used for my previous job and I no longer need. This is the disk I want to use for the Linux installation. It has a lot of partitions but quite a bit of free space (since I copied a 80GB disk and 250GB disk into a 500GB disk and haven't taken advantage of the extra space).My first choice of distro was Linux Mint, since it's known to be friendly to new users, and I like the software installer on it. I installed Linux Mint in the past in VirtualBox, and the latest version also installed fine, and I found installation instructions explaining how to provide my own partitions, but the installation failed during the "configuring hardware" stage. If you're interested, more details are available in this thread on the Linux Mint forums. I didn't get any reply to that thread.
I thought then that I'd try openSUSE 11.3. The live CD looked usable enough, but when I tried to install I couldn't tell how to make sure that I don't get a boot manager which will try to give me access to the Windows versions on the disks. I don't want this, and what I'm really afraid of is that an install will screw the booting of Vista x64 on the other disk (which, granted, I can disconnect for the install, but I'd rather not). At that point I decided to post a question here.So hopefully you understand what I want to achieve. I don't much care which Linux distro I install, but I'd rather have one which gives me as much usability out of the box (or easily installable) as possible.
View 5 Replies
View Related
Jan 27, 2016
I think my root drive is 100% full causing strange problems with my video server. What steps can I use to see what's taking up the room on the drive and perhaps identify files that can safely be deleted?
Code: Select allroot@lenny:/# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda2 55G 53G 0 100% /
udev 10M 0 10M 0% /dev
tmpfs 793M 1.1M 792M 1% /run
[code]...
View 14 Replies
View Related
Jun 7, 2011
I'm trying to perform a FULL install of 11.04 onto a 4GB USB drive, but the Ubuntu installer insists I must have at least 4.4GB free space.I am able to run the ISO LIVE from a 1GB usb drive created with LiLi USB Creator , but the Ubuntu installer demands at least 4.4 GB to install I can give Ubuntu the entire 4GB drive, but how do I get past the Installer's 4.4 GB requirement?I don't need the larger apps like Gimp/Office/Games to free up space. When I completely remove these apps from the persistent live install via Synaptic, I run out of space - Possibly due to cache issues. I'm very new and don't know how to proceed.I am able to FULL-install and boot Fedora successfully as its installer does not have the 4 GB limitation.Is is possible to install Ubuntu 11.04 onto the 4GB drive?
View 7 Replies
View Related
Feb 5, 2010
I am helping my pal to get into Debian (yes first timer).He is running W7 on a 500G SATA HDD and he has another 250G SATA HDD that he wants Debian to go to.Will Debian install grub on the master bootloader even if the installation is going on a separate hard drive?I have dual boot before but on the same hard drive.
View 6 Replies
View Related
Jan 14, 2011
So I'm planning to do a full install on a flash drive. I searched the forums for previous threads and there were loads. Was there a BIG one that I missed in the mess? If so, please direct me to it.
There was two contentious issues in all the threads and I'd like em resolved once and for all
1.Should I or should I not make a swap partition on the flash drive? What about /var, /tmp and /log?
2.Also can someone rank the following in terms of access speed and snappiness:
1) Live CD
2) Live USB with or without persistence (average Sandisk stick)
3) External 2.5" HDD (5400-7200 RPM connected via USB 2.0)
4) Internal 5400-7200RPM HDD using SATAII
5) Full install on USB flash stick (average Sandisk stick)
View 7 Replies
View Related
Jan 25, 2010
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies
View Related
Mar 16, 2010
My parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.
Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.
View 3 Replies
View Related
Aug 13, 2010
Debian and debian based distros issue has a issue that has come to make it self aware to me when I was trying to burn a video on my hard drive with braseo and it won't let me burn more than 4.4 gigs to a dvd with 4.7 gigs of free space even a file that is over the 4.4 gig limit by a megabyte with windows i didn't have this problem. One more thing I have 16 gig flash drive and on debian and debian based distros i can only use 13.1 gigs of it but on fedora I can use all 16 gigs.
View 3 Replies
View Related
May 1, 2010
Trying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
View 1 Replies
View Related
Mar 21, 2009
Sometimes when I do anything write heavy such as transferring backup or downloading large files from the net, the machine crashes almost completely.
View 8 Replies
View Related
Dec 11, 2010
I am using KDE 4.5 and I am unable to mount a hard drive in Dolphin.
I get the error message:org.freedesktop.Hal.Device.Volume.PermissionDenied: Refusing to mount device /dev/sdb1 for uid=1000
The filesystem for the drive that I want to mount is ext4 and the label is "repo"
View 2 Replies
View Related
Feb 26, 2015
Is there a way to save the iso dvd. So that I do not have to put them in when adding programs.
View 5 Replies
View Related
