I have a pc with windows on it, about 90% of the hard drive is full. I want to install dual
boot ubuntu with ubuntu using about 70% of the hard drive, do I need to manually create space, or can I just set during the install will ubuntu just over-write that much. I don't care about the files I have under windows.
i installed Ubuntu 10.10 on our second hard drive, and i cant dual boot it. it is set as slave, so should i set it to master, or do i need to hit a key @ initial boot. ive gotten a list that shows vista on it, which is on C: , but not ubuntu, which is on F:.
View 9 Replies View RelatedI would like to have 1 hard drive operate with Ubuntu 10.04 and another with Windows 7 Pro, with a proper boot selection menu when I boot up my computer.
View 5 Replies View RelatedI have Windows 7 x64 on a RAID0 Setup and have a separate 120GB Hard Drive and want to DualBoot with Ubuntu! How do I go by doing that seeing that LiveCD is not detecting Windows 7 Loader?
Twitpic : [URL]
I'm trying to create a dual-boot system, and have been following the instructions here. However my hard disk has bad sectors, and GParted won't let me resize the Windows partition. It tells me to use ntfsresize with --bad-sectors as an option, after having done some checks, all of which I've done. I've successfully shrunk the NTFS volume in this way -
when I boot into Windows, it says the hard drive is the size I set it at. However, the Ubuntu installer and Gparted still see the Windows partition taking up the entire hard drive. So, for the installation, do I have to set the size of the volumes manually, or is there a way to make Ubuntu see what ntfsresize has done?
I was attempting dual boot my computer (ubuntu 11.04 and windows 7) and when I got to the stage to allocate drive space I accidentally formatted the largest partition of my hard drive to a linux swap. My computer froze while it was formatting the drive and I was forced to power off my laptop. Windows was my original operating system and was installed on the partition that is now formatted (or maybe not because of the crash during the formatting) as a linux swap. Therefore my windows no longer works and I cannot restore my computer for a backup because it wont let me restore it to the partition that is now a linux swap. Now when I boot from the linux install cd I get an error and am not able to install ubuntu or format/allocate drive space. Is there a way I can reformat and fix my harddrive so I can them restore windows.
View 9 Replies View RelatedA few weeks back I was trying to install this (alongside windows 7) and no matter what I tried it would not install. I tried both 9.04 32 bit and 9.10 64 bit. Each screen (language, keyboard, etc) took about 20 minutes to load, and when I finally got to the install it always stopped at about 2/3 percent, giving some type of I/O error. No matter how many times i reburned and redownloaded. (old thread if you're curious)
I eventually gave up but then realized I had an old xbox hard drive hooked up that I cannot boot or read or do anything. It was set as hard drive 0 in windows hard drive manager or whatever. So I unplugged it. Now my windows drive is drive 0, and I have a second internal drive.
I finally got back to installing this. I avoided the graphical installer at first because it was so slow, opting for the alternate cd. It went fast but when I tried to partition it was unclear to me which disk i was partitioning. Doesnt matter because when i clicked ok, it froze at 0% for 30 minutes so i had to do a hard restart. Windows ran the disk check, etc, etc, I checked the disk management in windows and it was just a single windows partition as it should be.
So I tried the graphical cd again instead. It goes really fast through the screens now, HOWEVER it will not detect my drive 0 windows drive! Just my second internal drive which of course I can't install on without wiping the entire thing. I have installed kubuntu 9.04 dual booted with windows xp on this exact hard drive, over a year ago successfully, so I don't get it. What do i do??
I'd like the final layout to have a Windows partition (will start out as XP and will become Win7 when I can afford yet another copy), a partition for Ubuntu, and a shared Data partition that I can use for all my files between both OSs. I think this should be fairly straight forward with Linux on a Primary partition with / and swap. Only thing is, from what I've read (and yes I know this is a bit old school) it might be a good idea to put in a /Home partition so that I can reinstall new upgrades and maintain settings. But I don't want to max out my 4 primary partitions so I can use a 4th partition as a kind of sandbox for OS testing without using VirtualBox all the time.
This leaves me in need of some advice, I've never used Fdisk and I was planning on just using the Ubuntu installer to do all of this, but I don't know if I can create /Home as a logical partition in the main Ubuntu partition and still have the benefit of being able to reformat /root without losing /Home. I might have just confused myself, because no matter how many guides and How Tos I read I still don't really get extended partitions, I understand logical vs. primary but extended is...confusing. I need the Ubuntu partition to be bootable, so it needs to be a primary partition...I think. Unless I can have: /boot, /, swap, and /Home...
Also, if Ubuntu can read NTFS, and Win7 can read Ext3, what should a do with /Data? Or should I just go with FAT32 and be done with it. (It's a big HDD btw, 640 GB, so /Data will be fairly large)
Partition info:
sda2: Win7
sdb1: /boot
sdb2: LVM, containing , home, swap...
[code]....
I used to know how to access and rw other linux drives and do the fstab magic. For some reason I've lost my touch. I just want the drive to automount and have full access. I don't need a beginners tutorial on mkdir and fdisk -l. Is there a foolproof way to get my drives to do what I want? I dual boot fedora and ubuntu, but have the same issues on both.
View 1 Replies View RelatedI disconnect my internal Windows hard drive first. Then run the installer from the Desktop CD. Everything works great.This is approximately the steps I take: I reboot, everything is good. I reconnect my internal hard drive, boot to Windows, reboot back to Kubuntu, everything is still good. I run updates and follow the instructions of the Comprehensive Multimedia & Video Howto. I reboot again, still no problems. At this point, I figure everything is OK and I have no worries. I boot to Windows and do some work in that environment. The next time I boot to the external Kubuntu hard drive, I get the following errors:
Begin: Starting AppArmor profiles ...
mount: mounting /sys on /root/sys failed: No such file or directory
mount: mounting /dev on /root/dev failed: No such file or directory
[code].....
I currently have a 160GB hhd running Ubuntu 11.04 and Windows XP, with the following partition configuration:
sda1 Windows NTFS (primary-active and boot and system)
sda5 Linux Swap (logical)
sda6 Linux Ubuntu ext3 (root)
sda7 Linux Ubuntu ext3 (home)
sda2 other
I have Grub2 installed, which provides me the choice at boot to start either Ubuntu or XP. This currently works fine.
I want to clone this hhd and transfer to a new, larger hhd, and have several questions, since I don't want to make a mistake with something so crtical. 1) Which software is generally considered the safest, most reliable and easiest to use (dd, Gddrescue, Clonezilla, Paragon, Macrum Reflect, Easeus, Drive Image XML, or something else)?
2) Which software will be able to copy and include both operating systems in the partitions to be cloned?
3) Will that software change the booting process or options in the cloned copy in any way? I've read where using Easeus corrupts Grub2 and thus requires re-installing Grub2!
Are there any other concerns, considerations or factors I need to consider in cloning the hhd; e.g. prior formatting an external hhd, and with what file system? I've also read where FAT32 would be the choice, but don't really know for sure.
I have ubuntu 10.4 installed in xp. Ubuntu tells me I have 50 gigs HD space yet the folder tells me I only have 700 mgs and I am getting a warning of not enough space on the computer. My question is. Is this due to windows claiming the space and not allowing enough to be used by ubuntu? If I delete windows and make this computer all linux will that help?
View 2 Replies View RelatedI currently have Windows 7 installed on my laptop and I would like to dual boot w/ Fedora on the same hdd.I have two NTSF partitions, I shrunk my D drive 50GB for ext4 & swap.I've tried both liveusb-created & unetbootin to create a bootable USB to install Fedora.Anaconda starts up and I get through most of the install configuration, I set up GRUB & the partitions. Once I proceed to the next screen I get missing ISO image 9660 error My laptop doesn't have a DVD drive. It seems like a lot of people are getting this error, but I have found no concrete solution though.
How do I put the image on the drive? Windows can't read ext4 and I haven't been able to find a program that can.I have a USB to SATA adapter that I could hook up a DVD-ROM drive too, but I don't know if fedora will pick up on it.
I just got a new hard drive and need to transfer my dual boot window 7/Ubuntu 10.10 onto the new hard drive and be bootable. Is there an easy was to do this?
View 3 Replies View RelatedI have a laptop with two partitions, one with Windows XP and one for storage (formatted in NTFS). I would like to install Ubuntu on the storage partition, but my problem is that I can't boot from CD (or anything else) because my BIOS is password protected. I obviously don't know the password. y question is: If I plug the laptop's hard drive into another computer, install Ubuntu as described above and then reconnect it to my laptop, will it work?
View 2 Replies View RelatedWhenever I'm dealing with large numbers of computers that need to have identical windows installations put on them, I love using Symantec/Norton Ghost to image the NTFS partition (just making the .gho file the size of the disk I've used, instead of the 160/320GB full volume size), and then uploading it automatically to a windows share.I'd love to be able replicate this exact process with Ubuntu. I have one computer that's ready to go, and a few dozen more that I'd like to quickly get that same image on.
I've heard that there's a command called dd that can make disk images, but I'd really like some sort of boot disk that can allow me to make an image, save it, then run the boot disk on another computer to allow me to reconnect to the server and dump that image on that computer. Ghost 4 Linux doesn't have a network/server component, I think.even if such solutions cost money, I'd love to know if they exist or not.
partitioning my hard drive to dual boot windows 7 and open suse
View 2 Replies View RelatedI've been wanting to do this for a while and after upgrading some of my pc components I decided I would finally try to dual boot with full disk encryption on both windows 7 and Ubuntu 9.10. I managed to encrypt the windows drive with truecrypt and that worked. I installed Ubuntu 9.10 using the alternate cd and everything but /boot is in an encrypted LVM. Each OS is on a separate SATA drive the windows is on sda1 and ubuntu /boot is sdb1.
To setup the dual boot I started out following the tutorial [url] but its for XP and versions of ubuntu that use grub not grub 2. I ran dd as posted and saved the files it produced from truecrypt. I then ran into some problems with grub reinstallation so I simply reinstalled Ubuntu 9.10 from scratch again. This put grub 2 on the computer. I've managed to get it to add a Windows 7 option.
However, when the option is selected truecrypt comes up and says that the bootloader is corrupted and that I need to use the repair CD I burned before I encrypted the drive. My question is does anyone have any experience dual booting using Truecrypt on Windows 7 and LUKS/dm-crypt on Ubuntu 9.10 with grub 2? And how would I get the boot menu to work? I'd rather not reinstall but if I have to I have images from right before I encrypted so it wouldn't be the end of the world.
I have a 160Gig and a 40 Gig drive.I would like to install the system on the 160 Gig, and use the 40 Gig drive as a storage for backups or whatever.It appears in the installation process that I am required to use a mount point, which would then turn the drive over to the root system, which would not allow it to be totally available to me.I just want to format it to ext3 filing system.Coffeecat, if you are out there and see this, strange things are happening to the 40 Gig drive - it says it is using 2 gig, but it is totally empty of all system files, hidden files, trash, etc. and it is being imaged in the media folder in root. I believe I have messed this install up to the point of no return and think I should go ahead and start over.
View 5 Replies View Relatedthis may be a very stupid question, but. My computer has two hard drives. One has Windows XP installed on it. The other is blank.
Is it possible for me to install Ubuntu onto the second hard drive, and run a dual-boot using GRUB during startup? Or does it only work when both OSs are on the same hard drive?
I would like to install Ubuntu 10.04 on my new 1 TB hard drive. I currently have Windows XP installed on a 160 GB hard drive for things that I cannot do on Ubuntu. I would like to know if it's possible to install the other hard drive, and then dual boot Windows with it? Effectively dual booting across two hard drives. I wouldn't care if GRUB replaces the standard Windows bootloader, just as long as I can choose between the two at startup
View 9 Replies View RelatedI'm new to fedora 13 and I have been through a few installs already with a 12TB raid. Fedora is installed on a separate 250GB drive. I've mounted the 12TB drive as a single share and I'm capturing large video files (12-90GB each) to the raid in a Samba Share across the network. The system runs great for about three days and then I start getting warning messages that "the volume filesystem root has only 1.9GB of disk space remaining" then another later 205MB etc until it eventually fills to 100% and then locks the machine. If I reboot I get a Gnome error and can't login. The only solution has been to reinstall fedora again from scratch.
Each time I allocate more space for root. My current partition is 65G in size. The raid shows only 5.1TB of space used and it shows 7.2TB of free space. The raid share shows as being mounted in /media. Root shows that it will be full at 5.2TB, and I'm almost there, so I'm probably looking at another install in just a short while when it freezes again. I've read reinstall and make a larger root partition, but I'm not sure how big that must be to avoid this problem in the future. Also, is there a limitation on the size that root can be? my question stems from the fact that I have over 7TB of free space but somehow the root is reporting as 100% full at only to 5.1TB.
I have added no data to my hard drive in the last few days. I saw a notification saying I had only 1.8Gb left on my drive. Shortly after I dismissed it and ran: Code: sudo apt-get clean like the notification suggested. Then, another poped up. Now it said I have 0 bytes left.
So, I opened the disk usage analizer and the data seemed normal, and not my full drive size. It still was saying I have no space so I checked the properties widow for / . It said / contained 128TB of data and the file counter showed no signs of stopping after a few minutes. Obviously my drive is not 128TB in fact it's only 500GB. Also the disk manager program (system volume information?) Said it has 28 bad sectors.
create a partition seperate from my home directory out of it. i have a 500 gig hard drive and i wish to create a 70 gig partition on it on install i used entire disk is there any way to make a partition after this for i do not want to reinstall.
View 3 Replies View RelatedI'm a n00b at dual booting and I plan on installing Ubuntu 10.04 on a separate hard drive than my Windows 7 64 bit one in a dual boot situation. I have read that you can do this by unplugging the Windows hard drive, install Ubuntu on the other one, and than plug the Windows hard drive back in and everything will be fine and dandy. Is this correct? If it is, will I have to manually set the Primary and Secondary drive (in the BIOS I think?), or will it automatically do that.
View 6 Replies View RelatedMy system has Windows XP Pro SP2 installed on /sda1 and originally a 10.04 on /sdb1-3, now upgraded to 11.04. The Ubuntu system works fine (teething troubles with nvidia drivers on upgrade but fixed now), and the Windows system shows up in the grub menu, but when it's selected, I just get `GRUB Hard Disk Error' and nothing else. Windows installed properly, and booted successfully until I installed Ubuntu in the first place. I can still access the files on that drive from within Ubuntu.
I've tried fixboot in the Win Recovery Console, which sounded like it did something, but didn't fix the problem. This problem isn't new to grub2, by the way - I just haven't needed Windows in a year.
I've been trying to properly install grub for the past 3 days and failing every time.I recently bought a new computer and would like to dual boot Windows 7 64 and Natty. On my previous machines, ubuntu installer has automatically detected windows. It does not do so on this machine.I have three hard drives: 2 ssd's and a single 3 tb drive for storage.
I would like one ssd for windows 7 and one for natty.Currently, I am able to boot into both OS's but only by altering the boot sequence of the drives from the bios. I am hesitant to install grub to the windows drive for fear I will lose the ability to boot into windows. I did this early in the discovery process and ended up having to reinstall windows.
I am using Redhat Linux 4 as I checked space and foud that / is 100% full. Like below:
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/hda3 2316536 2179008 19852 100% /
/dev/hda2 101107 9324 86562 10% /boot
/dev/hda6 1683960 70256 1528160 5% /home
none 192012 0 192012 0% /dev/shm
How to create more space on / directory? or decrease size in / directory.
If this has been covered before I couldn't find it.
What I'm "Not" Asking... I'm not asking about installing the CD image to a USB hard drive to boot a live install version. I've done that to see is my computer will boot from the USB and it does.
What I want to do is this:
An actual hard disk install of full featured Linux to a portable USB Hard Drive. I want to be able to plug in the USB HHD and go Linux. (Why you might ask? Fair enough. The laptop is my wife's computer and she says absolutely no to Linux.