Ubuntu Installation :: How To FULL Install 11.04 On 4GB USB Drive
Jun 7, 2011
I'm trying to perform a FULL install of 11.04 onto a 4GB USB drive, but the Ubuntu installer insists I must have at least 4.4GB free space.I am able to run the ISO LIVE from a 1GB usb drive created with LiLi USB Creator , but the Ubuntu installer demands at least 4.4 GB to install I can give Ubuntu the entire 4GB drive, but how do I get past the Installer's 4.4 GB requirement?I don't need the larger apps like Gimp/Office/Games to free up space. When I completely remove these apps from the persistent live install via Synaptic, I run out of space - Possibly due to cache issues. I'm very new and don't know how to proceed.I am able to FULL-install and boot Fedora successfully as its installer does not have the 4 GB limitation.Is is possible to install Ubuntu 11.04 onto the 4GB drive?
So I'm planning to do a full install on a flash drive. I searched the forums for previous threads and there were loads. Was there a BIG one that I missed in the mess? If so, please direct me to it.
There was two contentious issues in all the threads and I'd like em resolved once and for all
1.Should I or should I not make a swap partition on the flash drive? What about /var, /tmp and /log?
2.Also can someone rank the following in terms of access speed and snappiness:
1) Live CD 2) Live USB with or without persistence (average Sandisk stick) 3) External 2.5" HDD (5400-7200 RPM connected via USB 2.0) 4) Internal 5400-7200RPM HDD using SATAII 5) Full install on USB flash stick (average Sandisk stick)
I disconnect my internal Windows hard drive first. Then run the installer from the Desktop CD. Everything works great.This is approximately the steps I take: I reboot, everything is good. I reconnect my internal hard drive, boot to Windows, reboot back to Kubuntu, everything is still good. I run updates and follow the instructions of the Comprehensive Multimedia & Video Howto. I reboot again, still no problems. At this point, I figure everything is OK and I have no worries. I boot to Windows and do some work in that environment. The next time I boot to the external Kubuntu hard drive, I get the following errors:
Begin: Starting AppArmor profiles ... mount: mounting /sys on /root/sys failed: No such file or directory mount: mounting /dev on /root/dev failed: No such file or directory
If this has been covered before I couldn't find it.
What I'm "Not" Asking... I'm not asking about installing the CD image to a USB hard drive to boot a live install version. I've done that to see is my computer will boot from the USB and it does.
What I want to do is this:
An actual hard disk install of full featured Linux to a portable USB Hard Drive. I want to be able to plug in the USB HHD and go Linux. (Why you might ask? Fair enough. The laptop is my wife's computer and she says absolutely no to Linux.
I have a pc with windows on it, about 90% of the hard drive is full. I want to install dual boot ubuntu with ubuntu using about 70% of the hard drive, do I need to manually create space, or can I just set during the install will ubuntu just over-write that much. I don't care about the files I have under windows.
Whenever I'm dealing with large numbers of computers that need to have identical windows installations put on them, I love using Symantec/Norton Ghost to image the NTFS partition (just making the .gho file the size of the disk I've used, instead of the 160/320GB full volume size), and then uploading it automatically to a windows share.I'd love to be able replicate this exact process with Ubuntu. I have one computer that's ready to go, and a few dozen more that I'd like to quickly get that same image on.
I've heard that there's a command called dd that can make disk images, but I'd really like some sort of boot disk that can allow me to make an image, save it, then run the boot disk on another computer to allow me to reconnect to the server and dump that image on that computer. Ghost 4 Linux doesn't have a network/server component, I think.even if such solutions cost money, I'd love to know if they exist or not.
What is the easiest and/or safest way to migrate my Wubi 10.04 install to a full install? Currently, my Dell XPS M1530 is currently dual-booting Ubuntu 10.04 LTS and Windows Vista Home Premium, and I've decided after using Windows a total of around 4 hours over the past 6 months that I can probably let it go. So, I don't need Windows anymore and I believe I'm ready for a full install of Ubuntu. Though, I probably will wait for 11.04 to come out first.
A few ways I've thought of already are: 1) Find an external hard drive to put the Wubi files on. 2) Upload files to an storage website. 3) Temporarily put the Wubi files onto another computer (Windows). All these meaning I would then wipe my harddrive and install Ubuntu from a CD. And by "files", I mean Documents, Pictures, Downloads, etc.
EDIT: deleting all my applications, because OpenOffice.org won't reinstall on my computer due to dependency issues while attempting to install LibreOffice. So a fresh install would be nice.
I have a 120 gig drive that I'd like to clone before it fails completely. I was thinking I'd pull the drive from the server and build a separate machine that has it's own os installed and the source and destination drive. Does anyone know of any linux tools will will do a full drive copy? Additionally, If possible, I'd like to move to a larger drive. how I'd migrate the 120 drive to a 400 or so? 1 idea I have is to install os on 2 new drives to where it they will boot, Then boot with one and copy source to the newly created destination drive.
I been using ubuntu wubi on my gateway notebook for a few months now and I am ready to clean windows all my computer and only use ubuntu. the question is do I have to reinstall everything from the ground up?? can someone please give me some tips! it will take me weeks to setup everything again
I am running Ubuntu in WUBI inside Windows, my first question is, can you do a full install to a new partition through the WUBI installation? Or would it be better to partition the disk, and just install Ubuntu, then deal with the MBR issue (been a while since I had a normal install, maybe the boot problems are gone?)? And is there any actual advantage to doing a stand alone install, while still dual booting Windows? Is there any gain from it versus the WUBI install I am running now?
Manual from Fedora says that I cannot Install Fedora 14 x64 bit version from USB. Why? Can't I use utillities like FlashBoot? or another tool to make bootable USB?
I bought a new issue of Linux Format magazine and saw it had a bootable disk with Fedora installer/live DVD on it which I was eager to try out "The worlds most advanced Linux distro" I put the DVD in my computer and rebooted it. I selected 'install or upgrade'. It started to load (blasting white text at me). I skipped the media test but then the screen was black and reacted to no mouse moving or keyboard pressing. Not even the OFF button, so I pressed RESET and selected 'install with basic video driver' this time it worked. It didn't fill my whole screen like many 'basic video drivers' but they don't cut off much so I was willing to forgive Fedora using one it was proberly only for the install anyway I could download a new one after. I have a Radeon HD 4200 (extreamly crap) intergrated into the north bridge. I can't afford an expensive graphics card. I build it myself so I can tell you what parts it's got if needed. Anyway I progressed through the setup without problems until I got to the partitionor which defaulted to 'Replace existing Linux system' this would delete Ubuntu an maybe Windows 7. I changed it to custom layout or something like that. It started a partitioner and I remembered I wanted to give ubuntu 30GB more room so I resized it. I created a new 50 GB logical partition and select it as the '/' partition, plenty more space for future Linux distributions. Here's the real problem. Soon after I hit install it said some repositorys require a network connection. It had only one option 'eth0' my motherboard has built in Ethernet but I connect to the net with a wifi card I do not have a cable long enough to reach this computer on the other side of the room. So how was I suppost to continue the setup? I pressed okay hoping it would give up and let me continue the setup but it didn't it said they was an error connecting to the Internet therefore setup could not continue. With only one option: 'Exit Installer'. GRRRR. Interestingly enough after I clicked it the disk drive's light kept flashing but the screen went black forcing me to reboot. Can anyone help me so I can install "The worlds most advanced Linux distribution"*
I want to upgrade my 9.10 from Wubi to a full install (my 30 gigs is almost filled) without losing my files and settings(like my panel apps and options). but how?
I was happily running F10 and against my better judgement when it offered to upgrade me to F11 I decided to give it a try. The F11 install hung at 893 of 1626 packages installed. Some SE Linux package was in process of install. On the next boot the installer fails to upgrade for a corrupted root. It says I can backtrack and do a full install, but crashes with a bug when I choose backtrack.
So here is my question - Can i edit the command line and tell the installer to full install rather than upgrade? Or am I stuck with downloading a DVD ISO and doing a full install that way. I've done F8, F9 and F10 so full install from DVD doesn't bother me.
I am trying to install Fedora 11 from a DVD. Not the live DVD, the full DVD and it hangs constantly. I had to wait 10 minutes for it to Find Storage Devices, 10 minutes to input a root password and now I am waiting for the drive shares to be setup. It's already been 10 minutes. I verified the disk and everything was fine. Why is this taking so long?
After trying to install and partition with a live CD I restarted the PC and What do you know it reads Starting Windows 7 , Opensuse installation Completely Gone Wasted like it never even took place , and it left a gift a 100 GB less of Space on the HD . at least thats what it reads out ... how to get my full HDD back ?
I am a backup noob. My idea of backing something up is finding a big enough flash drive and copying the necessary files over.
So I really need to learn now. I'm wiping a Vista laptop for a friend to install Windows 7. But first, I want to do a whole-drive backup in case something goes wrong. It's a 100GB drive with 50GB of data.
Is it possible that I could do this via my home network or via a direct ethernet connection? I have a desktop with a 1TB drive I could back up to. Like I say, I'm a noob so I'm open to anything.
One more thing: I'd like this backup to be in a form that I can retrieve individual files from it if necessary. If everything goes right, I'll probably want to pull My Documents out of the backup and drop it into Windows 7.
Oh, and why am I asking on UbuntuForums instead of a Windows forum? Because I'm betting I'll end up booting a live CD on the laptop to do the backup. But I'm just guessing. At any rate, I'm sure I'll use Ubuntu tools, because that's what I know.
The issue I am having is that Virtual Box does not recognize my USB drives. I understand that it is related to the fact that Ubuntu cannot recognize the permissions on the USB NTFS drive. So how do I mount the ntfs drive and gain full permissions?
One post suggested that I have to join my user to the 'vbuser' group in users and groups to fix this in 9.04, but I do not have a "vbuser" group in my list of groups. I am running 10.04.
Is it possible to encrypt the entire drive and not be prompted for the passphrase?
I have a request for a demo of our application and I am looking to create a virtual for VMware's player but need to make sure that the vmdk file cannot be mounted and files pulled from it to protect us from reverse engineering of the application.
I have added no data to my hard drive in the last few days. I saw a notification saying I had only 1.8Gb left on my drive. Shortly after I dismissed it and ran: Code: sudo apt-get clean like the notification suggested. Then, another poped up. Now it said I have 0 bytes left.
So, I opened the disk usage analizer and the data seemed normal, and not my full drive size. It still was saying I have no space so I checked the properties widow for / . It said / contained 128TB of data and the file counter showed no signs of stopping after a few minutes. Obviously my drive is not 128TB in fact it's only 500GB. Also the disk manager program (system volume information?) Said it has 28 bad sectors.
create a partition seperate from my home directory out of it. i have a 500 gig hard drive and i wish to create a 70 gig partition on it on install i used entire disk is there any way to make a partition after this for i do not want to reinstall.
if there was a way, to add a folder to a hard disk which was full of symlinks to a CD drive. This would primarily be a way to store offline media and a way to access it. I would still be able to browse the folder structure and see the files (but possibly not the sizes). I imagine something like this:
Therefore I can see what files I have available, and I know which media to insert (in this case cd1) and I would then be able to view the files? Or if anyone has a better idea I'm open to it. Just to mention I don't have a GUI on this server, it is completely headless so any solution needs to be console based
I think my root drive is 100% full causing strange problems with my video server. What steps can I use to see what's taking up the room on the drive and perhaps identify files that can safely be deleted?
I am using centOS-5, I have mount NTFS drive by using fuse. But there is no rights and even there is no option on right click to make new directory or to del any file or folder. This is line of fstab for NTFS drive
/dev/sda5/mnt/dntfsdefaults2 2
How can I get full access and control on this NTFS mounted drive.
1 is the first partition so windows finds it nicely. Before install, i unplugged my hdds so that grub wouldn't get confused. I told the installer to put the full install on sda3 with no swap space. I checked (advanced button on summary page) that bootloader is being installed to the usb on dev/sda (sda since no other drives attached). This should put it in the MBR (i think?)
Seems like I pressed all the right buttons huh? Is there a way to diagnose grub and see what's wrong? is there a reason grub may not initialize properly from a usb drive?
I didn't realize my system drive had filled up... and TaskWarrior overwrote my 'pending.data' with a 0-byte copy. d-: I had worked SO hard to get all my tasks imported from various other notes (many of which I deleted along the way), and hadn't yet prepared for the possibility of data loss. Should've set it up to use my Dropbox...why doesn't TaskWarrior make ANY backup buy default? That data is so important, and yet so small and trivial to backup. Anyway, my 'undo.data' is totally intact and seems to contain all the information theoretically needed to reconstruct 'pending.data'. Unfortunately right now I have no sample 'pending.data' to look at. d-: OR: does anybody know of a simple Linux utility I can use to recover previous file versions? It's possible no data was overwritten, since the replacement is empty.
Found what takes space but not sure what to delete here is the output of df -h Filesystem Size Used Avail Use% Mounted on /dev/sda1 9.2G 157M 8.6G 2% / /dev/sda5 9.4G 9.4G 20K 100% /usr /dev/sda6 213G 213G 20K 100% /var none 1.0G 12K 1.0G 1% /tmp tmpfs 2.0G 0 2.0G 0% /usr/local/psa/handlers/before-local How to identify what to delete to clear up space?
My friend and I were discussing partitioning and we disagreed on repartitioning when the drive was full. How full is too full before partitioning will mess up your file system? I've partitioned before but it was only after the OS was installed, so only about %5 of the drive is being used. I read that 90% or more is too much. My friend claims it doesn't matter, and you can repartition even if the drive is 95%+ full.
