I have added no data to my hard drive in the last few days. I saw a notification saying I had only 1.8Gb left on my drive. Shortly after I dismissed it and ran: Code: sudo apt-get clean like the notification suggested. Then, another poped up. Now it said I have 0 bytes left.
So, I opened the disk usage analizer and the data seemed normal, and not my full drive size. It still was saying I have no space so I checked the properties widow for / . It said / contained 128TB of data and the file counter showed no signs of stopping after a few minutes. Obviously my drive is not 128TB in fact it's only 500GB. Also the disk manager program (system volume information?) Said it has 28 bad sectors.
Trying to boot a mythdora (fedora 10 + mythtv) machine and several services can't start and are reporting disk full. Not sure how this is possible though:
[root@mythbox run]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00
Quote: Preconfiguring packages ... (Reading database ... 78720 files and directories currently installed.) Preparing to replace apt 0.7.25.3ubuntu9 (using .../apt_0.7.25.3ubuntu9.1_i386.deb) ... Unpacking replacement apt ... dpkg: error processing /var/cache/apt/archives/apt_0.7.25.3ubuntu9.1_i386.deb (--unpack): unable to create `/usr/share/locale/dz/LC_MESSAGES/apt.mo.dpkg-new' (while processing `./usr/share/locale/dz/LC_MESSAGES/apt.mo'): No space left on device No apport report written because the error message indicates a disk full error [Code]....
create a partition seperate from my home directory out of it. i have a 500 gig hard drive and i wish to create a 70 gig partition on it on install i used entire disk is there any way to make a partition after this for i do not want to reinstall.
If this has been covered before I couldn't find it.
What I'm "Not" Asking... I'm not asking about installing the CD image to a USB hard drive to boot a live install version. I've done that to see is my computer will boot from the USB and it does.
What I want to do is this:
An actual hard disk install of full featured Linux to a portable USB Hard Drive. I want to be able to plug in the USB HHD and go Linux. (Why you might ask? Fair enough. The laptop is my wife's computer and she says absolutely no to Linux.
if there was a way, to add a folder to a hard disk which was full of symlinks to a CD drive. This would primarily be a way to store offline media and a way to access it. I would still be able to browse the folder structure and see the files (but possibly not the sizes). I imagine something like this:
Therefore I can see what files I have available, and I know which media to insert (in this case cd1) and I would then be able to view the files? Or if anyone has a better idea I'm open to it. Just to mention I don't have a GUI on this server, it is completely headless so any solution needs to be console based
I have a pc with windows on it, about 90% of the hard drive is full. I want to install dual boot ubuntu with ubuntu using about 70% of the hard drive, do I need to manually create space, or can I just set during the install will ubuntu just over-write that much. I don't care about the files I have under windows.
Found what takes space but not sure what to delete here is the output of df -h Filesystem Size Used Avail Use% Mounted on /dev/sda1 9.2G 157M 8.6G 2% / /dev/sda5 9.4G 9.4G 20K 100% /usr /dev/sda6 213G 213G 20K 100% /var none 1.0G 12K 1.0G 1% /tmp tmpfs 2.0G 0 2.0G 0% /usr/local/psa/handlers/before-local How to identify what to delete to clear up space?
My friend and I were discussing partitioning and we disagreed on repartitioning when the drive was full. How full is too full before partitioning will mess up your file system? I've partitioned before but it was only after the OS was installed, so only about %5 of the drive is being used. I read that 90% or more is too much. My friend claims it doesn't matter, and you can repartition even if the drive is 95%+ full.
I experienced a full hard drive yesterday due to a massive error_log. We took care of the errors, but later found out we were missing files, including a MySQL database table. Having a shopping cart and ecommerce stuff on the site, we found that some of those files were missing, too.Does RHEL 5 have some sort of feature for automatically deleting files when the partition is full? If it does, I want to turn it off.
Whenever I'm dealing with large numbers of computers that need to have identical windows installations put on them, I love using Symantec/Norton Ghost to image the NTFS partition (just making the .gho file the size of the disk I've used, instead of the 160/320GB full volume size), and then uploading it automatically to a windows share.I'd love to be able replicate this exact process with Ubuntu. I have one computer that's ready to go, and a few dozen more that I'd like to quickly get that same image on.
I've heard that there's a command called dd that can make disk images, but I'd really like some sort of boot disk that can allow me to make an image, save it, then run the boot disk on another computer to allow me to reconnect to the server and dump that image on that computer. Ghost 4 Linux doesn't have a network/server component, I think.even if such solutions cost money, I'd love to know if they exist or not.
My wireless connection work just fine but it gives me wrong connection status, like 10% even when I'm seating near the wireless router or disconnect status while I steal manege to use the internet at full speed.
I disconnect my internal Windows hard drive first. Then run the installer from the Desktop CD. Everything works great.This is approximately the steps I take: I reboot, everything is good. I reconnect my internal hard drive, boot to Windows, reboot back to Kubuntu, everything is still good. I run updates and follow the instructions of the Comprehensive Multimedia & Video Howto. I reboot again, still no problems. At this point, I figure everything is OK and I have no worries. I boot to Windows and do some work in that environment. The next time I boot to the external Kubuntu hard drive, I get the following errors:
Begin: Starting AppArmor profiles ... mount: mounting /sys on /root/sys failed: No such file or directory mount: mounting /dev on /root/dev failed: No such file or directory
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
My parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.
Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.
Trying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
I have a laptop with only 30GB storage and I want to install Lubuntu in virtual box but Lubuntu needs 5GB of storage space which i dont have. Could i use an external 160GB hard drive to act as the hard drive for the virtual machine without affecting the files that are already on the external hard drive
I have a 120 gig drive that I'd like to clone before it fails completely. I was thinking I'd pull the drive from the server and build a separate machine that has it's own os installed and the source and destination drive. Does anyone know of any linux tools will will do a full drive copy? Additionally, If possible, I'd like to move to a larger drive. how I'd migrate the 120 drive to a 400 or so? 1 idea I have is to install os on 2 new drives to where it they will boot, Then boot with one and copy source to the newly created destination drive.
I recently bought 320 GB Trancend external hard disk and working fine days back.Earlier i could copy from and to the hard disk with out any issue. I dont know what happened after that now i am not able to write any files in to the external hard disk. This is not NTFS formatted device. here is some of the out put from terminal.
Code: sundar@sundar-sundar:~$ fdisk -l Disk /dev/sda: 120.0 GB, 120034123776 bytes
I set up a Windows partition and an Ubuntu partition in my laptop and each partition has about 60 gigabyte of disk space. Recently I keep getting messages that the disk space in my Ubuntu partition is almost full. How is it possible since I only have computer programs which I absolutely need?
I have a little/big problem. This morning, I dont know why, but suddently my hard disk was full. I thougt that the temporary space grew too mucho and I thought if I restart my machine, everything would be nice but no. Now in the logging screen comes messages that some components cant be load and so I can't go in my Fedora
I tried to access to my partition with Knoppix-livecd and free some space, but it seems that Knoppix can't access to that partition. I have installed fedora 12.
I have been trying to install centos on my hp servers and when i get to partitions my hard drives the OS does not detect any harddrives. I have 4 scsi drives and i believe a intergrated smart array controller.
I have a relatively common problem, but I don't seem to identify it's source. I have a SAMBA server on my LAN to which there are mapped a few shares as network drives in windows xp (as Y: ) and mounted as CIFS in linux [as /y]. The problem is that every time I save a file [either windows xp or linux] on the mapped drive / mounted folder, our IDEs alert us that the file changes right after the save. I am running SAMBA 3.3.2.
is there a way to write/unpack .qcow2 hard disk image directly to real hard drive in Linux?(I know it's possible to unpack .qcow2 to .raw and then dd to drive, but I'd like to skip .raw since its large)
I have a SATA drive that worked fine. Then I installed two more hard drives into my system. When these hard drives are installed, if I try to access the SATA drive in Linux, it will start lightly clicking and then the drive will become unavailable. If I power on the machine without the other two hard drives then it works fine. What could be causing this to happen? I don't think it's heat because the two hard drives are far away from the SATA drive.
