Debian :: Get A Lenny Iso That Can Install To Hard Drive
May 12, 2010
i just burnt a debian lenny 504 live disk. i don't think there's a way to install it to hard drive. i just did a google search and it appears that the latest debian lenny 504 cannot be installed to hard drive with the live cd. from what i have read, i need to get a "netinstall" iso (this is new territory for me). can anyone supply me with a link for an iso with a hash verification? i would be most grateful. the disk i had previously must be corrupted because the install quits at 5%.
View 2 Replies
ADVERTISEMENT
Nov 17, 2010
I am trying to install Debian 5.0 "Lenny" on a PC with a very new hardware config (i3 processor, DDR3 RAM,LG SATA DVD drive, and Seagate SATA HDD). During the hardware detection phase of installation, I get a message saying the driver for my CD drive is not known, and asking me to select one manually. The options I get are only 'devcdrom', which does not work, and my installation cannot proceed.
I tried the following:
1. I read in a similar query that to use SATA DVD drives, I will have to set some boot options, so tried entering install libatapi_enabled=1 as an install option. This showed 'unknown parameter' error followed by same problem.
2. My Intel m/b BIOS has an option to set the DVD drive to "Native" or "Legacy", default is Native. I also tried changing this to "Legacy". Still same problem.
3. Read that I have to point to different drivers, but don't know how to do this during the installation.
View 1 Replies
View Related
Dec 14, 2009
i was trying to use gnome and kde but i don't like them. I tried xfce and it seem to fit my needs but.My computer is used to be powered on for a weeks. While time passes, a process xfdesktop begin to use more and more memory and to free RAM i need to log out and log in again.
I tried squeeze yesterday on my virtual machine and it has 4.6 and seem not to have that bug, RAM usage is static(yes it still works when i write this and have memory usage 34492k, which is not changing for an hours of usage already), also 4.6 is MUCH better than 4.4.
i already tried adding squeeze to "sources.list" but i can see too many dependencies which should be upgraded if i install 4.6, i'm beginning to afraid it can crash entire GUI(or entire system, i can see there is libc6 required to be updated).
View 14 Replies
View Related
Aug 9, 2010
If this has been covered before I couldn't find it.
What I'm "Not" Asking... I'm not asking about installing the CD image to a USB hard drive to boot a live install version. I've done that to see is my computer will boot from the USB and it does.
What I want to do is this:
An actual hard disk install of full featured Linux to a portable USB Hard Drive. I want to be able to plug in the USB HHD and go Linux. (Why you might ask? Fair enough. The laptop is my wife's computer and she says absolutely no to Linux.
View 3 Replies
View Related
Oct 24, 2015
I am trying to install Debian onto an IBM ThinkPad 240X. The 240X will only boot from either an internal IDE hard-drive, or an external floppy-drive. For now, I have decided to ignore the option of using the floppy drive. I have other computers to support the process, an IBM ThinkPad T43p (Pentium M) as well as my primary laptop, a ThinkPad X200s (Core2 Duo). I have tried installing the hard-drive to be used into the T43p, then booting the Debian NetInstall from a USB thumb-drive, installing as usual, then transferring the hard-drive into the 240X. This does not completely work; GRUB and LILO will load, but the computer freezes very early (almost immediately) in the boot process.
Please note, I am trying this on a CF card. The 240X has an IDE-CF adapter, and my X200s has a USB-CF reader.So, I want to try to load the actual Debian Net Install on the 240X. Ideally, it will happen something like this; I will partition the hard-drive into these 2 partitions:
sda1: the Debian Net Installer
sda2: an empty partition waiting to have Debian installed onto it URL...
but the part I do not understand is how to get GRUB or LILO installed onto the CF card. I am wary of running commands such as "grub-install" as I do not want to mess up my GRUB install on the computers this command would be run from. If I run a command such as this, I would want it to ingore everything about the computer it is being run from, and only modify files or install onto the CF card. I would not want it to acknowledge the computer it is being run from as far as available installs, architecture, etc.
View 7 Replies
View Related
Feb 7, 2010
Can you install a live cd onto hard drive? I'm in a live environment now and don't see an install option.
View 10 Replies
View Related
Jun 26, 2015
“toshiba satellite u840w with hard disk drive and a solid state disk cache”
Debian 8 installer does not detect the hard drive during installation
I've recently tried to installed Debian 8. The problem is that the partition menu gives me these 3 options:
1. Configure iSCSI volumes
2. Undo changes to partitions
3. Finish partitioning and write changes to disk
There are no options for defining partitions or any hard drive during installation. After searching the internet i found that the problem because the solid state disk SSD cache. How I install a Debian 8 with computer which has a hard disk drive and a solid state disk cache.
more info: I want windows 7(64) and debian dual boot
View 14 Replies
View Related
Aug 9, 2011
I would like to build an oem style install partions that is bootable with menu to choose if I want to run install or boot already installed system. I would like to include current source packages on the same dive so if I don't have internet access at time of install, can can still install what I need.I know with Windows Vista and Windows 7, you can get this but how can I do this with Debian?
View 1 Replies
View Related
Jan 15, 2010
As you are probably aware that WD released new drives ranging from 1TB to 2TB with native support for 4K sector size. And as most of stuff written online is regarding Windows and their support for 4K, my question is has anyone already started to use it under linux?
[url]
[url]
I'm thinking about getting one of these drives:
1TB WD10EARS
or
1.5TB WD15EARS
I'm using Debian Lenny so my questions are: is fdisk automatically recognizes that that drive is 4K drive, or it totally ignores it and partition is as 512byte one? In windows if no 4K support is available it would emulate it and performance would be downgraded. Do I need to enable any specific components in kernel so 4K drive is supported? I wanted to make sure there would be no data loss if I select 4K partition type.
View 3 Replies
View Related
Apr 4, 2016
I have spend way too much time on this and it still fails. I installed the debian 8.3.0 AMD64 CD1 iso image on an empty external USB 1TB Western digital My passport Ultra. I use the graphical install method and the installation process of Debian appears to go fine, except it informs me at one point I am missing some nonfree firmware for something with wifi, but that shouldn't relate to this.
*FYI I put GRUB on the external hdd, sdb in this case.
*windows 7 is on the internal hard drive and I excluded it from the boot sequence
* using laptop lenovo t410
I reboot my computer and it hangs with a flashing - in the upper right corner. Never even gets to GRUB. For awhile I thought I might have partitioned something wrong, but I am now convinced that isn't likely. I tried countless number of different partition configs. Separate /boot partition and I also tried using guided partitioning.
I mounted the partitions of the external hard drive using another OS and GRUB appears to be there. So it is there.
I know some Western digital hard drives have added priopertary firmware crap, so I tried installing on a external Seagate drive and it still hangs. I tried installing linux mint on the Western Digital drive and it works fine!
BIOS settings fine. USB settings fine. I tried booting via the boot menu and moving the USB HDD to the top of the list.
I also tried installing with Debian Live on a USB, but that actually has more problems for some reason. I can never get passed the partitioning phase because it fails to create /boot or /swap partitions saying something about how they are still in use and another thing about how the partition table hasn't been updated in the kernal yet.
It seems I might be having this same issue, not sure: [URL] ...
View 7 Replies
View Related
Sep 13, 2010
ok I am using Debian 4 bigmem and I set up static ip for my box. This is for a class and we will be moving the hard drives around the lab to different computers. My question is what do I configure to get Debian to be ok with my using different nics at different times.
My first time I used it, I had eth0, but now I'm on a different computer (same type of hardware on all systems) but my nic is now eth1... And I had to set up static again for that nic. How can I have it just maintain a static ip for whatever nic/mac address on the computer that my hard drive happens to be put on?
View 1 Replies
View Related
May 3, 2010
I am trying to install Debian from a USB stick (which was prepared by unetbootin). The installer / kernel loads, and setup runs fine until It searches for a CD-ROM drive. My computer doesn't have a CD-ROM drive, but the net install ISO has been burned onto my USB stick. Is there some way that I can mount my USB stick as the cd-rom drive? it's of type FAT32 if it matters.
View 2 Replies
View Related
Feb 19, 2010
Recently we started getting these errors in syslog:
Code:
[31944.813993] hda: status timeout: status=0xd0 { Busy }
[31944.813993] ide: failed opcode was: unknown
[31944.813993] hda: drive not ready for command
[31949.822516] hda: status timeout: status=0xd0 { Busy }
[Code]....
Also the machine was under very high load and almost impossible to connect to.
I've searched, and found mostly answers involving broken hard disks or other hardware issues, but this is unlikely to be the case here: it started happening on several machines at the same time. They are HP DL580G5, and hda is the DVD player. It's not being used. The only thing we've recently changed is that we installed HAL (as a dependency of pcscd), and sure enough, killing HAL freed up the cpu and stopped the stream of errors. Sadly, pcscd requires HAL..
Has anyone seen this? Are there known problems with HAL in Lenny on HP hardware? I know I could do hal-disable-polling /dev/hda but I don't want to simply ignore a potential problem.
EDIT: versions used are HAL 0.5.11-8, pcscd 1.4.102-1 and kernel 2.6.26.2-amd64
View 1 Replies
View Related
Jan 17, 2010
Basically, I have no trouble booting off a really old kernel like 2.6.18-6. If I try to boot off the newest one installed with Lenny, I get errors such as "mounting /dev/ on /root/dev failed...ditto for /sys on /root/sys" almost as if it's failing to find the drive. This finishes up with "target filesystem doesn't have /sbin/init" and I'm dropped into a busybox shell.It's an ordinary SATA drive, which is being used as an OS drive only. It seems as if something has changed with the newer kernel, but I have no idea where to start or what to look for.
View 3 Replies
View Related
Mar 18, 2011
I am attempting to get Debian Lenny 5.0.8 to run on an OpenSolaris snv_134 lx-branded zone. Debian 6.0.0 is a total flop due to the included udev requiring a kernel >= 2.6.26 and the kernel provided by the lx26 brand being only 2.6.18.So I installed Debian 5.0.8 into a VirtualBox VM, configured it, then tarred up the install with the following command as root, from /:
tar -cjf /mnt/share/debian-5.0.8.tar.bz2 --exclude dev --exclude sys --exclude mnt --exclude proc *
I then installed that archive into a solaris zone, booted it, and had to run
perl -pi -e "s,1 1,1 0," /etc/fstab
in order to fix up the fstab. Now it boots (with a handful of warnings), but the problem I'm having is that I can't run apt. I get:
E: Couldn't determine free space in /var/cache/apt/archives/ - statvfs (75 Value too large for defined data type)
View 2 Replies
View Related
Feb 5, 2010
I am helping my pal to get into Debian (yes first timer).He is running W7 on a 500G SATA HDD and he has another 250G SATA HDD that he wants Debian to go to.Will Debian install grub on the master bootloader even if the installation is going on a separate hard drive?I have dual boot before but on the same hard drive.
View 6 Replies
View Related
Aug 20, 2010
is it save to install linux kernel 2.6.35.2 on Debian Lenny 5.0.5 or stick with automatic updates...
View 14 Replies
View Related
Jan 25, 2010
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies
View Related
Apr 14, 2010
I have read tons of articles on how but none work. I have edited the source.list file with what they say and I have used all the terminal commands that are becoming very repetitive.
View 11 Replies
View Related
Apr 26, 2010
I understand that FireFox requires GTK+. It appears that lenny did not include this package. Being new to Linux, I am unsure of just what it is that I need to do. Most of the web searches that I have doen have only confused me that much more.
So, how to get and install GTK+ on lenny?
View 3 Replies
View Related
Mar 16, 2010
My parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.
Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.
View 3 Replies
View Related
Aug 13, 2010
Debian and debian based distros issue has a issue that has come to make it self aware to me when I was trying to burn a video on my hard drive with braseo and it won't let me burn more than 4.4 gigs to a dvd with 4.7 gigs of free space even a file that is over the 4.4 gig limit by a megabyte with windows i didn't have this problem. One more thing I have 16 gig flash drive and on debian and debian based distros i can only use 13.1 gigs of it but on fedora I can use all 16 gigs.
View 3 Replies
View Related
Feb 14, 2010
I need to install gettext on my machine, so I use synaptic to install but it give the following error
gettext:
Depends: libc6 but it is not going to be installed
Depends: libgomp1 but it is not going to be installed
Depends: gettext-base but it is not going to be installed
Recommends: curl but it is not going to be installed or
wget but it is not going to be installed or
lynx but it is not installable
So I check libc6 which is install as libc6-dev other libc6 files such as xen, are high highlighted in red.
libgomp1 is installed.
gettext-base is installed.
curl will not allow itself to install as it says it needs libc6 (which is installed see above) lots of other curl files are highlighted red, with x's next to them, to remove. However the apply button is not highlighted?
View 2 Replies
View Related
Mar 19, 2010
Today I installed Lenny on a new server. The server didn't have any CD-Rom, so I tried putting the net install on a memory stick using unetbootin. The install went fine, but the problem was that the memory stick became sda and two SATA disks in the server became sdb and sdc.When I then tried to remove the stick, the SATA disks became sda and sdb, and it would not boot, because it had written the MBR on the stick.It hurried a little bit, so I had to take out a CD player from another computer, and connect it inside the server to get Lenny installed.But it would be cool if it was possible to install with the stick. And no more waste of CD-Rom players that will be used only once.
View 1 Replies
View Related
Jan 25, 2011
Howto install usb-creator on Lenny?
I've tried to install according to:
[URL]
but I get this error:
Code:
# bzr branch lp:usb-creator usb-creator.trunk
You have not informed bzr of your launchpad login. If you are attempting a write operation and it fails, run "bzr launchpad-login YOUR_ID" and try again.
bzr: ERROR: Unknown branch format: 'Bazaar Branch Format 7 (needs bzr 1.6
View 3 Replies
View Related
Feb 10, 2011
How-to install usb-modeswitch under Lenny?I cannot find it using apt-cache search.
View 2 Replies
View Related
Jul 27, 2010
I've been working with Debian and it's variants(Ubuntu, Mint) for about 2 years now. I'm bored at work and got to thinking that as much as I know about Linux now compared to when I started(enough --> none), I can always learn more. I notice I learn more by doing than by reading like many others and like a hands on approach, and if I screw something up, even better as I can learn from that mistake not just what happens but why it happens and how it can be avoided.
Anyways, I was installing Lenny on a VM and was going through the install options and was playing with an ssh install when I thought I might be able to install totally from the command line. I'd be surprised if I couldn't, and while I realize it's probably not the easiest thing to do, what have I got to lose? I managed to get as far as the shell but then i'm sort of at a loss. I think I have all the pieces(load components from media, configure packages, partition, install) but I can't really put them together. how do I go about, if at all, installing from the shell? I figure if I can do this i'll learn quite a bit more about the install process and can help myself out down the road if I'm not reliant on the hand-holding gui install.
View 6 Replies
View Related
May 1, 2010
Trying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
View 1 Replies
View Related
Mar 21, 2009
Sometimes when I do anything write heavy such as transferring backup or downloading large files from the net, the machine crashes almost completely.
View 8 Replies
View Related
Jun 1, 2010
How to install gnome-mplayer under Lenny, for example using Backports?
View 3 Replies
View Related
