i am searching for way to connect to my home network from any point only just if i have internet. i've heard about VPN and i think that this is right solution for my problem. can anyone point me to doc for beginners for setting up a VPN server? ps i've already searched for some articles and found two which were really for newbie, but it is interesting to find "best" how to for configuring vpn server.
View 1 RepliesI'm trying to set up a bind9 server for my home network, I have all my IPs set to 10.0.0.X. I would like the forward and reverse to be simply "machinename", not "machinename.domain.com", as I don't want to type a domain everytime.
In my named.conf
zone "net.local" in {
type master;
file "/etc/bind/net.local.ns";
allow-update { none; };
[Code]...
I'm trying to setup a NFS4 server (no security, local home network behind FW). It seems that I'm missing something because 'rpcinfo -p' does not list v4 for NFS: petit-pois:/home/eric# rpcinfo -p
[Code]...
I am using Squeeze and all appears OK at first... I have a DHCP lease, PING to router works, apache servering fine in and outside the network, Epiphany seems to connects to default debian.org only, BUT I cannot connect to any other websites and apt will not connect to any servers. I installed once, tried to fix problem, gave up and reinstalled and still have the same problem.
I unistalled Network Manager thinking that was the problem, but still the same issue. Is there a default firewall blocking certain connections or am I missing something I'm supposed to know about? I installed some non-free firmware in the beginning of install and all worked... and I connected fine when downloading packages during install.
At home I have two computers running linux connected to the same router. I would like to be able to connect them so that I can move files between them and execute simple commands. What is the most simple way to access a prompt on the other computer or to mount a partition currently used by the other computer?Using the www it is possible to connect two computers using ssh, but it should be easier to do this over the LAN, right? I have been googling a lot but not found anything.
View 10 Replies View RelatedI have installed apache php and mysql on my pc during debian installation... some of my friends complain they cannot access my webserver from their home and it's available only within my local network... Please help regarding this...
View 6 Replies View RelatedI have one pc on which I have installed slackware and samba (fixed IP, mask 255.255.255.0) I have another PC (also XP) which also has fixed IP running XP, and I can connect that to the slackware server easily My third PC connects to the internet and gets its IP address from the Cisco router(?) that provides the IP and mask on boot up.
I tried changing the IP and Mask on the slackware server to match the internet PC (which uses a mask 255.255.254.0) but the PC mask and IP changed on the internet PC I want the PC that connects to the internet to also be able to connect to the slackware server, but I see no need for the slackware server to also connect to the internet - I will mainly use it as a file server When I worked for another company I think the IT department talked about having 2 network cards in the PC that connects to the internet
I installed testing on my netbook with cd1. and too my suprise it didn't even include something as important as network manager. all i want to do is connect to my wired internet, install network manager, then install my driver for card. if i can just get wired working i will be homefree. the directions for installing my wire3less driver look super simple.
View 4 Replies View RelatedI installed a fresh Debian Desktop without the LAN cable connected. After that I got message when I put the cable in:
Code: Select allNetwork Interface
Connection New Wired Connection failed
I have tried to re-install everything once again with the cable in, but during the Debian installation there was no network detected.
However, I proceeded and re-installed Debian. But the problem persists. It continues to re-connect and than disconnect. There is a symbol showing re-connection. The network eth0 is visible to the machine.
I booted Mint Live disc and the same happens there.
Two nights ago I decided to switch from testing to unstable. Since then I am able to connect to the internet, but not to anything on my local network. I am unable to ping this computer from another one on the network. This computer is connected through wireless. I thought that something might have changed with iptables that was blockinghe localnetwork. I tried to "flush the iptables settings with "iptables -F". Since that didn't work I uninstalled iptables (which didn't work and I reinstalled iptables). In my browser I tried to connect to my router and that doesn't work either.I connect to this computer daily through ssh and connect to a NAS. Without ssh and my NAS I feel kinda lost
View 6 Replies View RelatedI have a laptop (running Arch Linux) and a desktop. Until recently my desktop computer ran Arch but I'm taking Debian for a spin now. At my home there is a wireless network with WPA2 encoding. I use the wicd gui to connect to this. I assume, that since I can see the SSID in the wicd window, all drivers are correctly installed and functioning. On my Arch computer, wicd reports this SSID as having WPA2 encoding, but on the Debian computer, it shows up as WEP. Even when I choose the correct encryption thing, WPA2 (preshared key), and put the correct password in, I can't get a connection up.
View 6 Replies View RelatedI have 2 windows pc's in my home and an office computer that have my files strewn about. I wanted to have them all in one central location that keeps a backup copy, so i used an old machine to start building a file server. I installed debian 5.0 on the machine, command line interface only. I have gotten ssh working so that i can do all my work on the box from one of my windows pc's by logging in with putty.my current problem is how to easily use the box hard drive for storing my files in an easily accessible way. i'm still working on getting samba to work so that i could map the /home directory to a drive letter on my two home pc's, but i'd also like to access files from my work pc. Before i do that, though, i wanted to know if this is safe and secure to map a drive on a remote machine through the internet? Are there any other security concerns I need to be addressing by having this file server set up?
View 7 Replies View RelatedSince a recent update on Stretch, I have been unable to use the network-manager to connect to my home wireless network on my laptop. It was working fine before. I did not change any settings on the WLAN router. I can still connect to other wireless networks at work and university, just not this particular one at home. All other non-Debian devices in my household are still able to connect just fine.While figuring this out, I have tried connecting manualy with ifup but I don't really know how that works. Right now there is only the loopback entry in /etc/network/interfaces.
Below is the output of syslog, when gnomes network-manager is trying to connect, but fails.
Code: Select allJul 19 20:01:57 debian NetworkManager[6705]: <info>Â (wlan0): Activation: starting connection 'Affenbande'
Jul 19 20:01:57 debian NetworkManager[6705]: <info>Â (wlan0): Activation: Stage 1 of 5 (Device Prepare) scheduled...
Jul 19 20:01:57 debian NetworkManager[6705]: <info>Â (wlan0): Activation: Stage 1 of 5 (Device Prepare) started...
[code]...
Recently upgraded my PC and my WiFi Hotspot connection is refusing to connect. Running a dmesg returns this
Code: Select all[66529.184299] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[66530.762594] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
And the IPv6 configuration in the Hotspot is Ignore
I can't seem to get this to work without having to physically create connections as root. The "Available to all users" in the nm settings box remains uncheckable, despite completing the following tasks:
Ensuring NetworkManager.conf contains
[main]
plugins=keyfile
[code]...
I would like to connect from squeeze to my windows network. Do I need samba server, smbclient is already installed?
If I do a doubleclick -> Windows Network then get "Unable to mount location".
If I use -> Connect to Server -> Windows Share then it works well.
How to configure samba server that I can see Windows machines in "Windows Network"?
I bought a USB wireless adapter for my desktop. I finally got it to partially work using firmware-ralink as described [URL]sing network manager it will pick up my wireless network. However it will not connect to it.
The output of iwconfig is
wlan0 IEEE 802.11bg ESSID:"familyfarm"
Mode:Managed Frequency:2.437 GHz Access Point: 00:1C:DF:B6:EA:B9
[code]...
I'm attempting to use a network bridge to connect my virtual machine, like so:
[Code]...
The issue is that when I type the following command, I get the further following horrible error message that doesn't seem to really point me to anywhere and I can't seem to find any relevant information to my problem on the web:
root@darkstacks:~# qemu-system-i386 -hda test.img -m 128 -curses -net nic -net tap,ifname=tap0 warning: could not configure /dev/net/tun: no virtual network emulation
Does anyone have any idea what I need to do here? My processor does not have the vmx flag, as it's a 2.4GHz P4. I don't know if that might have something to do with it.
I try to connect my Debian Jessie to my Windows share
This is what I have done:
-> 1 - create an .smbcredentials file located in my /home directory (with account / password and domain)
-> 2 - implement /etc/fstab with information like that :
//192.168.x.x/Animes/media/Animes cifs uid=toto,dir_mode=0777,file_mode=0777,credentials=/home/.smbcredentials,iocharset=utf800
and when I try to go on my windows share, I have this message:
An error occurred while accessing 'Home', the system responded: mount: only root can mount //192.168.x.x/Audio-Video-01 on /media/Audio-Video-01
I think about one thing, if uid=toto is different in fstab than my current debian account session name, it is possible the problem came because of that?
(fstab, uid=toto and current session titi)
I upgraded from lenny to squeeze on a notebook and I can no longer connect to the wireless network. The computer is an LG notebook and the network card is ralink rt2860. I am using Gnome and NetworkManager. The wireless key is WEP hex. It was working fine with lenny till before the upgrade. After the upgrade, the network card stopped working. So, I checked
$ lspci|grep Network
08:00.0 Network controller: RaLink RT2860
Then I reinstalled the driver with apt-get install firmware-ralink wireless-tools Then the network manager tray started working again and saw the network, but cannot connect. It was trying to connect but timed out and kept asking for the password. It is the correct password. I tried deleting the old connection and recreated a new one in the nm. But still does not work.
[Code]...
I was playing with my debian server when something went totally wrong while i was editing something on my network interface,i removed those crap that i wrote and left the network interface configuration as it was
Like for example after re-editing my network interface,it was like :
As i did a network restart, i get this error saying :
There is already a pid file /var/run/dhclient.eth0.pid with pid 2802 killed old client process, removed PID file.
What is this error and how can i fix it,because every time im re booting my server i lost my network config.
running debian 6.0 "Squeeze" I installed Evolution trough official debian squeeze mirrors, installed all available updates (that know off) but i still can connect to my POP3 (email) server.what does evolution need to connect to pop3 ? when use Kmail, everything works fine
View 11 Replies View RelatedI'm trying to install the openconnect VPN client on a server machine, Debian 7 Wheezy, and APT is trying to install a lot of dependencies. I think it's trying to install the whole desktop environment.I was searching the web but all articles are for desktop machines and nobody mentions my problem with the dependencies. I also have openconnect installed in two Gnome desktop machines without problems.
This is the output:
Code: Select all# apt-get install openconnect
Reading package lists... Done
Building dependency tree   Â
Reading state information... Done
[code]...
I have a home Debian server running, and i would like to set it up as a gateway. I have 2 networkcards in it. So internet comes from the modem and on the other card i want to setup a dhcp server and it has to share the internet. But i want it also to connect to a vpn and share the internet of the vpn.. Is that possible?
View 4 Replies View RelatedI need to set up a Debian server in a windows network so that users can securely ftp docs to the Debian server and then pull docs from the server when needed - using a secure ftp session. I have the Debian Server built and IP'd. Do I just need to set up the vsftpd.conf and thats it? Right now I am just concerned with getting ftp working.
View 7 Replies View RelatedI am putting together a server and computer lab at my school for Standardized testing, and am planning on using debian for it. But first, i must prove to the school board that this is a possible and viable option, so right now it is one pc with 1 gig ram (Going to be the server for this experiment), and two others with around 512 mb ram.the problem with all this is, the computers in the lab cannot have hard drives, as there is some sort of licencing issue. So I need to be able to have these two testing computers boot from the server's hard drive.
View 14 Replies View RelatedWe are having an issue where our network connection is dropping on our server. Everything was working for about a month without issues then suddenly we experienced a network outage. Here is what I found in our logs. Rebooting the machine was the only way to have everything come up.
Oct 16 09:20:59 server2 kernel: [2612816.936085] ------------[ cut here ]------------
Oct 16 09:20:59 server2 kernel: [2612816.936101] WARNING: at /build/linux-FpPMO6/linux-3.2.54/net/sched/sch_generic.c:256 dev_watchdog+0xf2/0x151()
Oct 16 09:20:59 server2 kernel: [2612816.936106] Hardware name: ProLiant DL380p Gen8
Oct 16 09:20:59 server2 kernel: [2612816.936110] NETDEV WATCHDOG: eth0 (tg3): transmit queue 0 timed out
[Code] ....
We have the same exact server, running the same exact debian version for over a year with no issues.
I am still building my home network, and want it o be able to connect to different computers by:
\pc-name
We have 2 types of computers:
Computers in the workgroup WORKGROUP (2 debian, 1 vista)
Computers in the domain TUE (required by our university) (3 vista, 2 xp)
Within the workgroup, I can call pc's by their name, but this is not possible by the pc's in the domain. I can however always do \ip and the 2 debians have a samba server running, which is available through \ip (and \name, for the computers in the workgroup).
I have a Canon MX860 network printer but I cannot get it to connect with my openSUSE 11.2 computer
View 9 Replies View RelatedWhile my wireless is generally working, there's one problem: I can't connect to my home network through it on my laptop. My desktop (which has an Atheros-based wireless card and is configured through ifup) connects just fine, as does another family member's laptop (also with an Atheros chip, but using NetworkManager) My laptop (With an Intel Centrino wireless chip), however, will not connect to the home router, though it can connect to public (unprotected) access points such as the one at my school. My home network is a private (hidden) network and also requires a WEP key to connect to and, as mentioned, works fine with several other systems running 11.3. I've attempted to use both ifup and NetworkManager and can't connect using either method. With ifup, the connection attempt just seems to time out during the connection attempt, while with NetworkManager, it doesn't even seem to try: I select the connection that I defined and click "Connect" and nothing happens after that. I'm using KDE and installed from the LiveCD
View 2 Replies View Related