Debian Configuration :: Nagios Server Config Error
Feb 5, 2016
Running natios server in Debian 8? I cannot start nagios3 demon, it got following error:
Error: Check period '24x7' specified for service 'check ssh connection' on host 'testk2' is not defined anywhere!
Error: Notification period '24x7' specified for service 'check ssh connection' on host 'testk2' is not defined anywhere!
But if I commented following statement in generic-service_nagios2.cfg, it works just fine.
# check_period 24x7
# notification_period 24x7
View 2 Replies
ADVERTISEMENT
Mar 3, 2011
I was playing with my debian server when something went totally wrong while i was editing something on my network interface,i removed those crap that i wrote and left the network interface configuration as it was
Like for example after re-editing my network interface,it was like :
As i did a network restart, i get this error saying :
There is already a pid file /var/run/dhclient.eth0.pid with pid 2802 killed old client process, removed PID file.
What is this error and how can i fix it,because every time im re booting my server i lost my network config.
View 1 Replies
View Related
Jul 9, 2011
Error: Cannot open log file '/usr/local/nagios/var/archives/nagios-07-08-2011-00.log' for reading!
View 2 Replies
View Related
Mar 27, 2011
I installed debian 6 (stable) on laptop with dual boot Windows 7 and Debian. when i was installing debian ,every things were ok and installed correctly (such as DHCP configuration) before installing APT package configuration part. error is about mirror zone! i checked it and tested with all mirorrs in list but i couldnt config APT yet.i did installation without APT.after booting debian i have apt-get and aptitude commands but didnt work commands like apt-get update or aptitude install ... or aptitude update .... when i ping an ip , it dosent answer cause of errors .(but i have network connection on windows7 correctly. im using connection wired.
View 1 Replies
View Related
Nov 9, 2010
After an automatic update from Debian I get the following error while starting a root terminal:
An error occurred while loading or saving configuration information for gnome-terminal. Some of your configuration settings may not work properly.
Failed to contact configuration server: the most common cause is a missing or misconfigured D-bus session bus daemon.
View 6 Replies
View Related
Jul 29, 2010
I want to restrict the access to my local web server by IP address. Im in a LAN (192.168.200.xx) so i have this:
[code]....
But when i try to connect from 192.168.200.4 it says i don't have permission to access
View 1 Replies
View Related
Mar 23, 2011
Heare i come with Nagios Problem, When ever i stop nagios it say's
[root@x292 ~]# service nagios stop
Stopping nagios: No lock file found in /usr/local/nagios/var/nagios.lock
When ever i restart nagios it say's
[root@x292 ~]# service nagios restart
Running configuration check... CONFIG ERROR! Restart aborted. Check your Nagios configuration.
my nagios.cfg file is
# 'Nagios CFG 1'
[Code]...
View 12 Replies
View Related
May 26, 2011
I have installed latest Nagios and Nagios plugins. Nagios is working properly, but when I go to the browser n write the www.server-name.com/nagios, it gives
Not Found
The requested URL /nagios/ was not found on this server. How can I tell Apache to open Nagios on adding /nagios in my URL.
View 2 Replies
View Related
Oct 30, 2010
I'm working hard with Nagios 3.0.4 on Debian Lenny. I have some questions. I can't find any information about these issues. I have hosts with a first_notification_delay of 60 minutes.And I have the whole day a Nagios controlling the same hosts. It's good to know if the same host is turned on during the night, but my work period begins at 10:00 am and it finish at 22:00 pm, I'm not a lucky boy I have configured a notification Period to 10:00 am to 22:00 pm.
Question 1: If a host goes into hard state CRITICAL, I know that Nagios waits 60 minutes to send a notification, but What happens if the host recovers before the first_notification_delay period ( for example, 30 min before)?Does it send the recovery notification or not?
Question 2: If a hard state happens at 21:59. Does Nagios wait until the 10:00 am of the day after to send the notification? If the host recovers at 9:00 am of the day after is the notification message cancelled?
View 1 Replies
View Related
Jun 13, 2010
I tryed to install a DNS server on debian lenny, i installed bind9 and webmin, and then i installed a bind module for webmin. I created a domain with webmin but when i tryed to add a address record with it i had a Error-Missing Content-Type Header.
View 1 Replies
View Related
Jun 3, 2011
Running CentOS 5 KDE as a DNS Resolving Caching Name Server, Centos.myname.local ... I run PeerBlock with iBlock List, the 2 main ones which blocks everything, I may have to config it to allow connections. How is Nagios to install and setup. I use it at work, in the NOC and really love this software. 5 computers and a lot of devices using reserved IP's.
View 3 Replies
View Related
May 4, 2010
I have configured a Nagios server which is working well with all king of clients. But when I added a new windows machine to monitor, it gives a error message "connection refused". I have set everything as prior machines.
Now, I just wanted to know the process by which we can check if server is able to communicate with the client's NSclient daemon. In Linux, we simply issue "./check_nrpe -H hostname" and if ok, it gives the NRPE version which indicates the status ok.
View 3 Replies
View Related
Sep 6, 2011
i'm facing an error 500 internal error and i don't know where to start .... How can i get information about the error in order to fix it ???at /var/log/apache2/error.log i can't find anythingi have virtualmin installed , i searched at/var/log/virtualmin/domainname_error_log but nothing .... where is apache supposed to keep log for 500 errors ?
View 1 Replies
View Related
Aug 2, 2010
I am trying to get the application NagVis to run on our Nagios server. The installation appeared to complete successfully, but when I access the web pages, I get the following on-screen error:
[Code]....
View 1 Replies
View Related
Jun 30, 2015
I have just installed Debian Weezy and for some reason it just does not see my router.1) is there a good network config script I can use?if not then what files must be edited to setup the network?When I attempt to ping the router, it does not see it. I have checked the cables etc.
View 6 Replies
View Related
Mar 5, 2011
At the moment I am having a problem with the MySQL server on my VPS. It's a completely fresh install of both Debian 5 and MySQL but the problem is upon logging in I get:
[root@boris ~]#mysql -u root -p
Enter password:
ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: YES)
[code]....
View 8 Replies
View Related
Jun 20, 2015
I am having trouble using touch pad in jessie. My touch pad was ok when it's in wheezy but after i updated to jessie, i can't really get used to it.
I don't know whether i setting it up wrongly, sometimes, my touchpad will keep dragging, without releasing. And if I click the bottom right of the touch pad, it's not right click; instead i have to use two fingers.
etc. So how can i change to back to a more traditional usage? Also, do jessie have a setting like ubuntu saying disable touch pad while typing?
View 2 Replies
View Related
Nov 8, 2015
I'm trying to set up my Intel Wireless 3945ABG (which is supported in the kernel) and I don't understand where to start if I want to use systemd to do this.
I've installed my Debian (Stretch Alpha4) base system using the wireless to download the necessary components but when I boot into the system I need to set up the wireless card separately.
I would prefer to be able to install wireless without the requirement of connecting via ethernet so no package installs other than what is downloaded by the installer.
I can't even find documentation on this specific issue because everyone seems to reference /etc/network/interfaces which AFAIK is not supported in systemd. How do I configure a wireless card using only systemd?
View 2 Replies
View Related
Mar 11, 2016
Can I use the config for my current kernel (the jessie 3.16 one), and use it to build a more recent kernel (3.18)? Do I just copy across the config and try and build with it, or is there some tool that will bring across the existing config but also set up reasonable defaults for any new options in the newer kernel, and any other migrations that might need to be applied?
View 4 Replies
View Related
May 16, 2010
I'm recompiling my kernel on a dell latitude c600 running lenny as I type, and it's taking forever, so far upward of 4 hours.I think I'm getting drivers for ever piece of computing hardware since the univac So I googled "a kernel conf creator" and got [URL]... Its a nice, clean method for finding what hardware your using... you just run lspci cpuinfo make xconfig and put in all the info yourself. So I was thinking: this is exactly the kind of dull, repetitive behavior that computers were made for. Is there a program that can find my hardware info, and make the.config itself, with very little user input?Or should I reinstall debian on another partition and steal the .config from it? Or should I man it up and do it myself?
View 14 Replies
View Related
Mar 29, 2011
I installed the Gnome desktop CD1 AMD 64 version of Debian Squeeze. I installed samba and python-smbc. I am missing samba printers in my system-config-printer. Anyone know why? [url]
View 2 Replies
View Related
Oct 13, 2010
I have a config file called hosts.cfg.
It contains entries like this:
Quote:
There are many more of these entries in the file, over 500, all in this same format: each host has a "define host" followed by 18 directives contained in squiggly brackets.
If I want to know all the hosts that are in the hostgroup called SERVER_GRP, I suppose I would need to read every hostgroups line (8th directive in squiggly brackets) that contains SERVER_GRP and output the corresponding host_name line (1st directive in squiggly brackets) from that entry.
View 3 Replies
View Related
Jul 29, 2010
I have a few questions to ask, so please pardon me
1) How to check for https in commands config file for Nagios? I only know how to check for http, not sure for https.
2) The log file in Nagios, is it possible to extend Nagios's plugins (or are there already have plugins existed) so that we could actually make use of the log file to check for status of each and every services in different hosts, instead of looking through the log file manually which can be very time-consuming if the list is very long.
View 10 Replies
View Related
Oct 28, 2015
I know very little about Debian but have an ASUS T100TA tablet which runs fairly well under Debian 8 Jessie (kernel 3.16.0-4-686-pae). I used the following guide successfully to activate the wireless but am having trouble with the audio section of it.URL...
First, I went here and downloaded the file called 'NEW T100_B.state'.URL....
Then I copied it to /var/lib/alsa/asound.state and ran 'alsactl restore' which reported that i had no soundcards.I then downloaded and expanded linux-firmware-master-intel.tar.gz but am not sure what to do with these files. I copied them to /lib/modules/3.16.0-4-686-pae/kernel/drivers/firmware as they are specific for this kernel, but they don't seem to be doing anything and 'alsactl restore' still tells me that I don't have a soundcard. What do I need to do with these files?
View 13 Replies
View Related
Feb 10, 2016
I've downloaded configuration files for my VPN, Kovurt, and they don't have a .ovpn file extension. Further, when I tried to enter the information manually (using this guide), I saw that the files only include the <ca> tags, and no <cert>, <key> or <tls-auth> tags.
Here is the content of one of the config files, simply named 'Tokyo' with no extension. (adding .ovpn didn't work either):
Code: Select allclient
dev tun
proto udp
remote 50.31.255.86 443
resolv-retry infinite
nobind
[Code] ....
I have an open ticket with Kovurt asking for the other info, but I know already that they don't have much in the way of documentation or support for Linux.
View 0 Replies
View Related
Apr 17, 2010
how can i do user2 can't get the file /home/user1/www/wp-config.php by using an editor but the webserver can?i mean how can i disallow access on other user's directorys but allow only one? (www-data in case).
View 7 Replies
View Related
Apr 7, 2011
I'm currently dual-booting Squeeze & Windows XP on a machine i use frequently.
In my experience on the desktop, i now see no reason to have Windows XP as a boot option, & wanted to try & avoid a full re-installation of Debian in order to remove XP (merging it's partition with / ).
I have a checklist that i put together, but wanted to be sure this was all correct before going forward.
1. Perform full back-up of all data.
2. Boot into Debian, through GUI -
System Tools > Disk Utility
- Select HDD (80GB Hard Disk)
- Select windows partition ( /dev/sda1 )
- Format /dev/sda1 to Ext4 Filsystem
3. Boot Live CD
- Use gParted to extend /dev/sda2 (was 38GB, will extend to 78GB)
4. Remove XP from the boot menu.
( Note: My ~ folder is on the same physical drive as / (same volume), but i actually store all Media on a separate physical drive which is formatted in NTFS. I plan on reinstalling XP using a virtual hard disk, & sharing that with the virtual machine.Here is a screenshot of my Disk Utility - [URL]
View 6 Replies
View Related
Jan 3, 2016
I have a Jessie with grub2. I've bought ssd and copied root partition onto it. I've also installed grub on this disc. I would like to have dual boot:
- First option: old root booted from hdd
- second option: boot from copied ssd and use root from it.
So i would have two identical but independent configurations.
Both disc has different uids (changed after cloning).
I had a hope that i will change fstab to mount root partition from ssd, but it doesn't work. I need to change grub configuration, but how to add new position?
There is also problem that bios doesn't allow me to choose disc to boot from. So i would rather prefer to change grub configuration for dual boot from different disc.
View 8 Replies
View Related
Feb 6, 2010
I run a network with about twenty Debian systems, currently running Etch. I maintain a central passwd and group file, which is regularly copied to each system. This works fairly well, but I have some problems with the system account UIDs and GIDs.
I find different systems often pick different UID and GID values for system accounts like bind, ntp, sshd etc. I think the values chosen at install come from the system UID and GID ranges, and are allocated sequentially, so the values on a system depend on which packages were installed, and the order they were installed in.
Is there any way to specify the UID and GIDs for system accounts at installation time? Are there any other thoughts on how to implement shared passwd and group files (apart from NIS, which I don't want to use)?
View 1 Replies
View Related
Feb 2, 2010
I run a mediaserver on Archlinux, working perfectly (or almost). I have set up NFS v3 and that worked for me on these clients:
- Debian Lenny
- Archlinux 64bit
Now I've upgraded my Lenny-box to squeeze and I see that 2 of my 3 shared folders (tdone and twatch) are mounted like they should and the third one (media) doesn't come up. A 'mount -a' as root gives this error: mount.nfs4: access denied by server while mounting (null) My relevant fstab-lines:
[Code]....
how I can go about debugging this?
View 1 Replies
View Related
