I recently bought a new hard disk for my /home tree. I don't have encrypted home directories currently, but I was wondering if there is an easy way to encrypt my home directory so that it is automatically decrypted when I'm logging in (console/kdm). Basically I would like to manually do same thing as Debian installer would have done.
I'm running Squeeze.
I have one of my user's home directory on a seperate partition, and I was wondering if there was a way to only mount it when/if the user is logged in and unmount it if they log out.
View 1 Replies View RelatedUsing SUSE 11, I'm trying to change my existing login user id HOME directory to use encryption. I use YAST to do this, just by clicking the ENCRYPTION box inside the USER AND GROUP MANAGER tool.I receive this error message -- "Not enough disk space left to copy existing data".Which file system do I need to add space to?Here are the filesystem existing sizes --
Filesystem: / Size: 6g Used: 3g
Filesystem: /home Size: 1.8g Used: 65m
I recently reinstalled Lenny and I am attempting to save my /home directory. I used the graphical install and when it came to the part about partitioning, I created a new /home partition "hdb1" and told the installer to ignore my old /home partition "/dev/hda9".Following the completion of the install, I logged in and changed my /etc/fstab so that /home --> my old /home partition "/dev/hda9". I then mounted the old partition to /home and rebooted the system. Now, when I go to my /home directory >> properties, I can see that the files I had are on the drive (2GB are used) --- but --- I cannot actually see the files??
View 1 Replies View Related2 of us have been googling all morning trying to find out how we can restrict ftp logins to their own home directories only but nothing we've found so far has worked. We've tweaked sshd_config so that they default to their home directory but they are able to navigate up/across/down to everything. This is a "straight-out-of-the-box" debian 5.0.5 Netinst. Just a basic system with Apache/MySql/PHP/SSH and no desktop.
View 6 Replies View RelatedI need to add another user besides the one set up during the installation procedure but I also need to limit all users to use only their own /home/user directory.
View 4 Replies View RelatedNot using filename encryption when you create a new encrypted folder is easy, but how to disable it in the home encryption that is automatically set up by the Karmic installation CD?
View 1 Replies View RelatedThe laptop runs Debian Squeeze XFCE installed from the Live iso (uname -a gives 2.6.32-5-686 as the kernel) and has Wicd 1.7.0 for network management and uses the ipw2100 wifi firmware/drivers. It connects fine using WEP encryption at home and to unencrypted connections found in a couple of public areas. I have had one problem with a WEP encrypted connection in a cafe (got through encryption, but could not get an IP address. There are workarounds which I will try next time I have coffee there When changing my router to use WPA2, I get 'bad password' errors. There is quite a literature on 'bad password errors' and Wicd and kernel 2.6.32, however a lot of the pages are contradictory. The Wicd log showed this...
2011/06/07 17:25:59 :: WPA_CLI RESULT IS ASSOCIATING
2011/06/07 17:26:00 :: wpa_supplicant authentication may have failed.
2011/06/07 17:26:00 :: connect result is Failed
[code]...
I'm fine using WEP at home, but I need to connect out and about as well and meet WPA2 connections in some locations
I've a Lenovo G50-80T with W8.1. I want to install Debian 8.1 in dualbooting mode. I've done this other times without problems. But this time I want encrypt the Linux partition (not the Windows partition). I'll use dm-crypt to do that. I want to know if this way is secure for protect the data on Linux partition or if I need encrypt the entire drive.
View 3 Replies View RelatedCould anyone point me to some simple articles that explain what email encryption is and how to set up a mail server (e.g. Exim) that can send secure emails? I know nothing about networks, mail servers, encryption, etc., but I have to be an expert on it before I walk into work tomorrow morning.
View 14 Replies View RelatedI've just made a fresh install of Ubuntu 10.04. When I right-click a panel and choose "New Panel", the panel is made, but is not visible. The panel is placed on the left side of the screen, and icons on the desktop is moved to the right. Also windows does not use the full width of the screen when maximized. I've tried to remove the panel configuration in my home directory, logout and login, installing ATI drivers and running a gnome-panel command (from another post on ubuntu forums), but nothing works.
View 2 Replies View RelatedI have an interdependent collection of scripts in my ~/bin directory as well as a developed ~/.vim directory and some other libraries and such in other subdirectories. I've been versioning all of this using git, and have realized that it would be potentially very easy and useful to do development and testing of new and existing scripts, vim plugins, etc. using a cloned repo, and then pull the working code into my actual home directory with a merge.
The easiest way to do this would seem to be to just change & export $HOME, eg
cd ~/testing; git clone ~ home
export HOME=~/testing/home
cd ~
screen -S testing-home
# start vim, write/revise plugins, edit scripts, etc.
# test revisions
However since I've never tried this before I'm concerned that some programs, environment variables, etc., may end up using my actual home directory instead of the exported one. Is this a viable strategy? Are there just a few outliers that I should be careful about?
I have some errors when run the mount -all command: mount: wrong fs type, bad option, bad superblock on /dev/sdc5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Failed to open /proc/filesystems: No such file or directory
[Code]..
How is the best way to rename an existing user and his home directory under Debian Lenny? BTW I'd like to have the same settings like Desktop Icons, Bookmarks etc.
View 5 Replies View RelatedI have been trying for close to 7 hours now to create a working encrypted bootable usb key for debian now.
I start by running the debian installation dvd (1 of 3. I downloaded and burnt all three ISO's that I found here: [URL] .... (2015-06-06 17:33) to disk), and when I get to the partitioning part, I cannot get an encrypted volume that will hold the root filesystem.
Here is what I have tried:
I have tried the Guided partitioning option to use the entire disk and set up encrypted LVM, to no avail.
I am left with a primary boot partition of 254.8 MB, at ext2 with /boot mountpoint on it, and a logical partition of 15.8 GB, with crypto as it's file system that says it's "not active". This bit here seems to be a running theme as I keep coming back to this set up, (give or take some space arrangement). From what I've read and seen, I should be seeing an Encrypted Volume container similar to LVM, but called an "Encrypted Container" that I can create additional partitions in like / and /home, and what have you.
And I can't "activate" the partition either. I have tried both the Configure Logical Volume Manager, which changed the partition to an LVM partition that dosn't encrypt anything inherently (and I have checked), and I have tried the Configure encrypted volumes option, which leads to the same results basically.
I have tried manually creating the partitions, a 512 MB ext4 /boot partition and then partitioning the rest of the space as "physical volume for encryption" with aes encryption, 256 key size, xts-plain64, Passphrase encryption key, erase data flag, bootable flag off.
Same result, 1 primary boot partition, 1 logical (I later tried making it a primary partition to, with the same results) crypto volume that is "not active".
I also tried setting up the a logical volume manager, which created a container to create additional partitions in which I could encrypt, but it was either a partition dedicated to something (i.e. root (/) or /home, or /swap, etc) or it could be encrypted, but not both. I even tried creating a root partion, and then selecting Configure encrypted volumes, and then selecting the root partition, and here is where I thought I was getting somewhere, because then it comes up giving me all the same options above, but it also specifies mount point under encryption. Which is /, which is what I'm after. So I accept that, and it goes back to being crypto, "not active" and when I check the partition again, the mount point option is gone.
Last thing I tried was going back to having a 512 MB /boot partition, and an encrypted partition set up with Configure encrypted volumes option, and then specifying the encrypted partiton with the Logical Volume Manager as the place to create logical groups and volumes, to little avail. I can create more volumes that are either encrypted, or a useful non encrypted volumes like / (root), /home, /swap, and the like, but not both at the same time.
Following this guide: [URL] ....
This leads me to a useable system, but the system wasn't encrypted. When I booted, I wasn't asked for a passphrase, and I checked the stick with my old linux mint dristro, and I was able to mount the logical volume and look at the contents, /etc, /home, /var by activating the partition in GParted and mounting it.
A number of users seem to mark an encrypted partition as lvm and then create more logical volumes within that that either actually become encrypted, or they don't check. I'm not sure which after my testing.
[URL] .....
I have also read this: [URL] .... and this [URL] .....
I found this which shows the container I believe I should be seeing if I do this right, but I can't get it : [URL] ....
I have also watched movies on youtube about it : [URL] ....
Could the issue be that I'm using a Lexar JumpDrive? 16 GM USB 3.0.
I've gotten debian to run off of it on it's own so I kind of doubt it.
I would like to configure my Debian Jessie system in this way.
Two partitions:
1) /boot on /dev/sda1
2) everything else on /dev/sda2
I want to encrypt the second partition with LUKS. And then install over it a LVM volume. Inside the LVM volume i will create the / (root), /var, /opt and /home virtual partitions. In this way, i'll get asked only once for the password to decrypt all partitions. Because if i don't use LVM, then i'll get asked for the password for each encrypted partition.
I can follow and understand almost everything of this HOW-TO for Archlinux: [URL] ....
Only two passages are unclear to me:
1) Configuring mkinitcpio
I don't understand what i should do here in order to complete this. What should i do in Debian to configure "mkinitcpio"? what is the equivalent thing to do here?
I thought that the kernel would automatically recompile itself with all installed modules on the Debian system, once cryptosetup/LUKS or LVM2 get installed.
2) Configuring the boot loader
I don't understand what should i write in /etc/default/grub. Will GRUB automatically load the LUKS and LVM2 modules? Also, I don't think that i could boot the system in this way:
cryptdevice=/dev/sda2:LVM root=/dev/mapper/LVM-????
Actually the "root=" volume is the whole volume to mount as LVM. It isn't the final root partition.
In my recent installations of Debian stable release (Jessie) with Gnome and Cinnamon respectively, I added my wife as a normal user. A home directory was created automatically for her.
In these installations, I am able to access her home directory, while, in the past, I was not allowed to access her home directory on previous Debian releases.
I tried to download Knoppix 6.0 iso, but it ran out of storage space. It was placing it into /tmp. Is there a way that I could have it placed in my /home directory, which is plenty big?
edhe@hebrews:~$ df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 935M 256M 632M 29% /
tmpfs 470M 0 470M 0% /lib/init/rw
udev 10M 96K 10M 1% /dev
tmpfs 470M 0 470M 0% /dev/shm
/dev/sda9 356G 1.5G 337G 1% /home
/dev/sda8 373M 11M 343M 3% /tmp
/dev/sda5 4.6G 4.0G 383M 92% /usr
/dev/sda6 2.8G 341M 2.3G 13% /var
Other than my encrypted home directory, I am all set to switch from ubuntu to Debian.Is it sufficient to install ecryptfs-utils or do I need to setup a script or something similar for it to automatically decrypt my home directory on login?
View 4 Replies View RelatedWhen I installed, I selected the option to encrypt my home folder. I believe this is causing constant crashes now, since error message is user id/password related. Is there a way to remove the encryption?
View 5 Replies View RelatedI need to do a reinstall (read the details here): http://ubuntuforums.org/showthread.php?t=1703381 but I need to be able to access my home directory which is encrypted. Is there a way to decrypt my home folder, so that I don't get into trouble accessing it later on?
View 9 Replies View Relatedi am searching for way to connect to my home network from any point only just if i have internet. i've heard about VPN and i think that this is right solution for my problem. can anyone point me to doc for beginners for setting up a VPN server? ps i've already searched for some articles and found two which were really for newbie, but it is interesting to find "best" how to for configuring vpn server.
View 1 Replies View RelatedAt home I have two computers running linux connected to the same router. I would like to be able to connect them so that I can move files between them and execute simple commands. What is the most simple way to access a prompt on the other computer or to mount a partition currently used by the other computer?Using the www it is possible to connect two computers using ssh, but it should be easier to do this over the LAN, right? I have been googling a lot but not found anything.
View 10 Replies View RelatedI wonder do we need firewall for home pcs at all?I mean, fine, for servers and stuff, but I have my own laptop station. People have different position on this issue.
View 14 Replies View RelatedI have 2 windows pc's in my home and an office computer that have my files strewn about. I wanted to have them all in one central location that keeps a backup copy, so i used an old machine to start building a file server. I installed debian 5.0 on the machine, command line interface only. I have gotten ssh working so that i can do all my work on the box from one of my windows pc's by logging in with putty.my current problem is how to easily use the box hard drive for storing my files in an easily accessible way. i'm still working on getting samba to work so that i could map the /home directory to a drive letter on my two home pc's, but i'd also like to access files from my work pc. Before i do that, though, i wanted to know if this is safe and secure to map a drive on a remote machine through the internet? Are there any other security concerns I need to be addressing by having this file server set up?
View 7 Replies View RelatedI have the partition like below. Now i want merge the /home partition into /dev/sda1 partition .
[Code]...
I want encrypt my home folder by using the DES? How to do it?
View 1 Replies View Relatedis it possible to mount a truecrypt file container as a home directory before login, if so how to do that?
View 3 Replies View RelatedIs it possible to split the home directory into 2, 1 for the personal files (documents, images, videos, music, etc.) and another for the setting files (config, temp, etc.)
View 9 Replies View RelatedWhen installing the latest Distro of Mint (I believe this is not much different, if at all, from Ubuntu as far as this goes) I chose to have my Home folder encrypted using the login password. This was a function of the installation. What I was wondering about was how secure this was and if I should maybe use something to do a better encryption or not.
View 1 Replies View Related